SUSE Installation auf SONY VAIO Notebook
Hi,
ich habe mal eine Frage bezüglich der Installation von Suse 7.0 auf meinem SONY VAIO Notebook. Leider scheint Suse mein CD-Rom-Laufwerk nicht richtig zu unterstützen. Jedenfalls werden die Daten beim Installationsstart nur sehr (!) langsam (ca. 30 Minuten) in die Ramdisk kopiert.
Es gibt zu diesem Thema auch eine Erklärung auf der Suse-Website. Leider steige ich da nicht durch und möchte Dich daher fragen, ob Du mir da irgendwie weiterhelfen könntest.
Wär' echt klasse. Weil ich will auch mobil NICHT mehr auf dieses eine, na Du weißt schon, Betriebssystem (verdient es diesen Namen?) zurückgreifen müssen.
Die Datei findest Du im Anhang. Also schon jetzt 1000 Dank für Deine Hilfe.
PS: Es hat auch nichts damit zu tun, dass das PCMCIA-Modul geladen werden muss. Suse macht dies bereits automatisch. Auch wird das CD-Rom als TOSHIBA CD-ROM XM-7002Bc richtig identifiziert. Ich bin echt ratlos...
Gruß,
Torsten
---------------------------------------------------------------------
Hier kommt die Datei:
---------------------------------------------------------------------
Description of Sony Vaio PCG N505SN
Exact modelname
Sony Vaio PCG N505SN
Manufacturer's description can be found at : http://www.vaio.sony-europe.com/_d/f...eries/info.htm (in German)
Processor, Memory, Bus
Processor
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Mobile Pentium II
stepping : 13
cpu MHz : 397.902477
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx osfxsr
bogomips : 397.31
256 kByte cache,
61 MByte basic memory equipment, optional upgrade .....
Graphic chip, Display
Graphic chipset: Neomagic Corporation [MagicGraph 256AV]
Display: XGA 1024 X 768
XServer: The XFree86 SVGA Server Version 3.3.5 works fine. No particular server options needed. From .X.err :
XFree86 Version 3.3.5 / X Window System
...
(--) SVGA: PCI: NeoMagic NM2200 rev 32, Memory @ 0xfd000000, 0xfe800000
(--) SVGA: videoram: 2560k
...
From lspci -v :
00:0a.0 VGA compatible controller: Neomagic Corporation [MagicGraph 256AV] (rev 20)
Subsystem: Sony Corporation: Unknown device 0005
Flags: medium devsel, IRQ 3
Memory at fd000000 (32-bit, prefetchable)
Memory at fe800000 (32-bit, non-prefetchable)
Memory at fec00000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
From SuperProbe :
First video: Super-VGA
Chipset: Yamaha 6388 VPDC (Port Probed)
RAMDAC: Generic 8-bit pseudo-color DAC
(with 6-bit wide lookup tables (or in 6-bit mode))
BIOS settings: NONE
Pointing Device
Touchpad with 2 Buttons. Recognized and supported under Linux as a standard PS/2 mouse.
Sound
Sound chip: Yamaha Corporation YMF-744B [DS-1S Audio Controller]
lspci -v Output :
00:09.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S Audio Controller] (rev 02)
Subsystem: Sony Corporation: Unknown device 0010
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at fedf8000 (32-bit, non-prefetchable)
I/O ports at fcc0
I/O ports at fc8c
Capabilities: [50] Power Management version 1
Supported by ALSA Version 0.5.8. Alsa detect Soundchip as a Yamaha Corporation YMF-744B.
/usr/sbin/alsaconf generates the following entry in the /etc/modules.conf :
alias char-major-116 snd
alias snd-card-0 snd-card-ymfpci
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0660 snd_device_gid=17 snd_device_uid=0
post-install snd alsactl restore
Sound is supposed to work with OSS. The chip is detected by OSS automatically, but it did not work. The only sound i got was a long beeping and the system locked up.
PCMCIA
Availalbe slots : 1
PCMCIA controller: Ricoh RL5C475 PCI-to-CardBus
From /var/log/messages:
kernel: Linux PCMCIA Card Services 3.1.3
kernel: kernel build: 2.2.13 #1 Mon Nov 8 18:28:35 GMT 1999
kernel: options: [pci] [cardbus] [pnp]
kernel: PnP: PNP BIOS installation structure at 0xc00f6db0
kernel: PnP: PNP BIOS version 1.0, entry at f0000:b358, dseg at 400
kernel: PCI routing table version 1.0 at 0xfdf60
kernel: Intel PCIC probe:
kernel: Ricoh RL5C475 PCI-to-CardBus at bus 0 slot 12, mem 0x68000000, 1 socket
kernel: host opts [0]: [serial irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34]
kernel: ISA irqs (default) = 10,11 polling interval = 1000 ms
Necessary options for core and chipset: irq_list=10,11
Special IRQ, IO or memory settings: exclude irq 5, exclude irq 9 in /etc/pcmcia/config.opts
Special BIOS settings : NONE
probe -v and probe -m Output:
PCI bridge probe: Ricoh RL5C475 found, 2 sockets.
i82365
IrDA
findchip -v Output :
reg=0x000
Found NSC PC87338 Controller at 0x398, DevID=0x0b, Rev. 2
SIR Base 0x3f8, FIR Base 0x3f8
IRQ = 10, DMA = 0
Enabled: yes, Suspended: no
UART compatible: yes
Half duplex delay = 0 us
Chipset and support under Linux : does not work
Special settings : ---
FireWire
lspci -v Output :
00:08.0 FireWire (IEEE 1394): Sony Corporation CXD3222 i.LINK Controller (rev 02) (prog-if 10 [OHCI])
Subsystem: Sony Corporation: Unknown device 8060
Flags: medium devsel, IRQ 9
Memory at fedf7000 (32-bit, non-prefetchable)
Memory at fedf7c00 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Chipset and support under Linux : not supported
Settings :
External connection
1 USB connector. lspci -v Output:
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at fca0
After that you can acces the floppy drive under /mnt
iLINK-Port-Replicator
iLINK (IEEE1394) S400
Sound: Micro in, Headphones
APM
The following APM Kernel configuration works partially : [*] Enable APM at boot time[*] Do CPU IDLE calls[*] Enable console blanking using APM[*] Power off on shutdown[*] Ignore multiple suspend/standby events[*] Ignore multiple suspend/resume cycles[*] RTC stores time in GMT[*] Allow interrupts during APM BIOS calls
apm -s : suspends to memory
apm -S : does nothing
Suspend to memory via the function keys works.
Suspend to disk via function keys works, with one limitation. After a fresh reboot, it takes about 15 - 30 seconds before the suspending starts. During this time the notebook seems to hang. The next time suspend to disk will work properly.
Lid closure does not evoke a suspension event.
Other storage media
Hard disk : IBM-DARA-206000, 5729MB w/418kB Cache, CHS=730/255/63
CD-ROM : TOSHIBA CD-ROM XM-1902B, 16x, 128kByte Cache
Floppycontroller : According to dmesg there is no floppy controller
Output of fdisk -l :
Festplatte /dev/hda: 255 Köpfe, 63 Sektoren, 730 Zylinder
Einheiten: Zylinder mit 16065 * 512 Bytes
Other technical data
Size: 259 x 208 x 22.2 mm^3. Weight: 1.2 kg
Special equipment:
V.90 56KBit PC Card Modem,
USB Floppy Disk Drive
PCMCIA CDROM-Drive mit IDE PCMCIA Card.
Port-Replicator
Annotations
Booting :
it is possible to boot the Kernel from the USB Floppy Driver, but this is really slow. Loading and uncompressing the kernel takes about 10 minutes.
in order to use the CD-ROM Drive you need the following append line : ide2=0x180,0x386
The cardmanager will hang and PCMCIA will not work porperly, if at all, when the USB Floppy drive is connected to the notebook.
USB Floppy works with SuSE Linux 7.0. Just run the following commands :
rcusb start
modprobe usb-storage
mount /dev/sda /mnt
After that you can acces the floppy drive under /mnt
The system will freeze, when using the function keys to change the brightness/sound volume (Thanks to M. Hissmann).
Zitieren
Zitat von kriz-
Lesezeichen