Anzeige:
Ergebnis 1 bis 3 von 3

Thema: Suse 8.0 Hardware-Änderungen nach Installation

  1. #1
    Registrierter Benutzer
    Registriert seit
    Aug 2002
    Beiträge
    7

    Question Suse 8.0 Hardware-Änderungen nach Installation

    Hi Leute,

    ich habe durch einen Wechsel auf eine größere HDD meine Partitionen von der alten Festplatte auf die neue Festplatte übertragen.
    Nach dem Wechsel kann

    1) mein CDBrenner und
    2) die 2. IDE Festplatte (alles vorher schon installiert) nicht mehr gemountet werden
    3) es sind nicht alle Partitionen der Neuen Platte ansprechbar.

    Fehlermeldung: kein gültiges blockorientiertes Gerät.


    Ich habe die folgende Syteminformation beigefügt:

    Was ich in diesem Zusammenhang nicht verstehe, sind die inhaltlichen Abweichungen unter:

    1.2
    1.8
    1.11



    i) vorher:

    1. Hardware

    -------------------------------------------------------------------------------

    1.1 procinfo

    Linux 2.4.18-4GB (root@Pentium.suse.de) (gcc 2.95.3 20010315 ) #1 1CPU [linux.]

    Memory: Total Used Free Shared Buffers Cached
    Mem: 61876 57632 4244 0 1284 24668
    Swap: 200772 18472 182300

    Bootup: Tue Oct 22 23:19:52 2002 Load average: 0.36 0.47 0.26 3/67 1351

    user : 0:00:25.99 6.6% page in : 128961 disk 1: 96r 4w
    nice : 0:00:00.20 0.1% page out: 30955 disk 2: 12331r 3073w
    system: 0:00:11.17 2.8% swap in : 1410 disk 3: 1r 0w
    idle : 0:05:58.21 90.6% swap out: 4544
    uptime: 0:06:35.56 context : 216805

    irq 0: 39557 timer irq 8: 2 rtc
    irq 1: 184 keyboard irq 11: 913 usb-ohci, usb-ohci,
    irq 2: 0 cascade [4] irq 12: 25875 PS/2 Mouse
    irq 3: 9 irq 14: 118 ide0
    irq 4: 4 irq 15: 14938 ide1
    irq 6: 108 floppy [2]

    -------------------------------------------------------------------------------

    1.2 Hardisk

    -------------------------------------------------------------------------------
    1.2 Partitions

    Disk /dev/hdc: 255 heads, 63 sectors, 3739 cylinders
    Units = cylinders of 16065 * 512 bytes

    Device Boot Start End Blocks Id System
    /dev/hdc1 * 1 505 4056381 b Win95 FAT32
    /dev/hdc2 506 3739 25977105 f Win95 Ext'd (LBA)
    /dev/hdc5 506 2437 15518758+ b Win95 FAT32
    /dev/hdc6 2438 2462 200781 82 Linux swap
    /dev/hdc7 2463 3739 10257471 83 Linux

    Disk /dev/hdd: 255 heads, 63 sectors, 787 cylinders
    Units = cylinders of 16065 * 512 bytes

    Device Boot Start End Blocks Id System
    /dev/hdd1 * 1 788 6329578+ b Win95 FAT32
    -------------------------------------------------------------------------------

    1.3 Mountpoints

    /dev/root / ext2 rw 0 0
    proc /proc proc rw 0 0
    devpts /dev/pts devpts rw 0 0
    shmfs /dev/shm shm rw 0 0
    usbdevfs /proc/bus/usb usbdevfs rw 0 0
    /dev/fd0 /media/floppy vfat rw,sync,nosuid,nodev,noexec 0 0
    -------------------------------------------------------------------------------

    1.4 /boot

    total 3720
    drwxr-xr-x 2 root root 4096 Oct 21 22:58 .
    drwxr-xr-x 20 root root 4096 Oct 23 2002 ..
    -rw-r--r-- 1 root root 375421 Mar 27 2002 System.map-2.4.18-4GB
    -rw-r--r-- 1 root root 9128 Mar 25 2002 boot-bmp.b
    -rw-r--r-- 1 root root 9240 Mar 25 2002 boot-menu.b
    -rw-r--r-- 1 root root 7480 Mar 25 2002 boot-text.b
    -rw-r--r-- 1 root root 512 Oct 21 21:33 boot.1600
    -rw-r--r-- 1 root root 512 Oct 21 21:33 boot.1607
    lrwxrwxrwx 1 root root 11 Oct 21 21:22 boot.b -> boot-menu.b
    -rw-r--r-- 1 root root 728 Mar 25 2002 chain.b
    -rw-r--r-- 1 root root 505328 Oct 21 21:33 initrd
    -rw-r--r-- 1 root root 500848 Oct 21 21:33 initrd.suse
    -rw-r--r-- 1 root root 5181 Oct 21 21:33 lilo.log
    -rw------- 1 root root 41472 Oct 21 22:58 map
    -rw------- 1 root root 41472 Oct 21 21:33 map2
    -rw-r--r-- 1 root root 512 Mar 25 2002 mbr.b
    -rw-r--r-- 1 root root 76288 Mar 25 2002 memtest.bin
    -rw-r--r-- 1 root root 81988 Mar 25 2002 message
    -rw-r--r-- 1 root root 656 Mar 25 2002 os2_d.b
    -rw-r--r-- 1 root root 964815 Mar 27 2002 vmlinuz
    -rw-r--r-- 1 root root 82994 Mar 27 2002 vmlinuz.autoconf.h
    -rw-r--r-- 1 root root 40799 Mar 27 2002 vmlinuz.config
    -rw-r--r-- 1 root root 964815 Oct 21 21:25 vmlinuz.suse
    -rw-r--r-- 1 root root 130 Mar 27 2002 vmlinuz.version.h
    -------------------------------------------------------------------------------

    1.5 kernel



    #
    # This variable contains the list of modules to be added to the initial
    # ramdisk by calling the script "mk_initrd"
    # (like drivers for scsi-controllers, for lvm or reiserfs)
    #
    INITRD_MODULES="ide-scsi"


    -------------------------------------------------------------------------------

    1.6 /etc/fstab


    /dev/hdc7 / ext2 defaults 1 2
    /dev/cdrecorder /media/cdrecorder auto ro,noauto,user,exec 0 0
    /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
    devpts /dev/pts devpts defaults 0 0
    /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0
    /dev/fd0 /media/floppy auto noauto,user,sync 0 0
    proc /proc proc defaults 0 0
    usbdevfs /proc/bus/usb usbdevfs noauto 0 0
    /dev/hdc1 /windows/C vfat noauto,user 0 0
    /dev/hdd1 /windows/D vfat noauto,user 0 0
    /dev/hdc5 /windows/E vfat noauto,user 0 0
    /dev/hdc6 swap swap pri=42 0 0


    -------------------------------------------------------------------------------

    1.7 boot.msg
    Inspecting /boot/System.map-2.4.18-4GB
    Loaded 12771 symbols from /boot/System.map-2.4.18-4GB.
    Symbols match kernel version 2.4.18.
    Loaded 15 symbols from 1 module.
    klogd 1.4.1, log source = ksyslog started.
    <4>Linux version 2.4.18-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002

    . . .



    -------------------------------------------------------------------------------

    1.8 SCSI

    Attached devices:
    Host: scsi0 Channel: 00 Id: 00 Lun: 00
    Vendor: ATAPI Model: CD-R/RW 4X4X32 Rev: 3.VR
    Type: CD-ROM ANSI SCSI revision: 02
    -------------------------------------------------------------------------------

    1.9 CD/DVD Links

    -------------------------------------------------------------------------------

    --- /cd - /dvd ---
    lrwxrwxrwx 1 root root 17 Oct 21 21:32 cdrecorder -> /media/cdrecorder
    lrwxrwxrwx 1 root root 12 Oct 21 21:32 cdrom -> /media/cdrom
    lrwxrwxrwx 1 root root 10 Oct 21 21:32 dvd -> /media/dvd

    --- /media/ ---
    total 19
    drwxr-xr-x 2 root root 4096 Oct 21 21:32 cdrecorder
    drwxr-xr-x 2 root root 4096 Mar 21 2002 cdrom
    drwxr-xr-x 2 root root 4096 Oct 21 21:32 dvd
    drwxr-xr-x 4 mick users 7168 Jan 1 1970 floppy

    --- /dev/cdr* ---
    lrwxrwxrwx 1 root root 8 Oct 21 21:32 /dev/cdrecorder -> /dev/sr0
    lrwxrwxrwx 1 root root 8 Oct 21 21:32 /dev/cdrom -> /dev/hda

    --- /dev/dvd* ---
    lrwxrwxrwx 1 root root 8 Oct 21 21:32 /dev/dvd -> /dev/hda
    -------------------------------------------------------------------------------

    1.10 lilo test

    LILO version 22.1 (test mode), Copyright (C) 1992-1998 Werner Almesberger
    Development beyond version 21 Copyright (C) 1999-2001 John Coffman
    Released 31-Oct-2001 and compiled at 20:50:13 on Mar 25 2002.
    MAX_IMAGES = 27

    raid_setup returns offset = 00000000
    Reading boot sector from /dev/hdc
    Merging with /boot/boot.b
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 3739 cylinders,
    63 sectors. Partition offset: 39552093 sectors.
    Secondary loader: 18 sectors.
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 3739 cylinders,
    63 sectors. Partition offset: 39552093 sectors.
    Mapping message file /boot/message
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 3739 cylinders,
    63 sectors. Partition offset: 39552093 sectors.
    Message: 161 sectors.
    Boot image: /boot/vmlinuz
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 3739 cylinders,
    63 sectors. Partition offset: 39552093 sectors.
    Setup length is 10 sectors.
    Mapped 1887 sectors.
    Mapping RAM disk /boot/initrd
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 3739 cylinders,
    63 sectors. Partition offset: 39552093 sectors.
    RAM disk: 987 sectors.
    Added linux *

    "ro root=1607 hdd=ide-scsi"

    Boot image: /boot/vmlinuz.suse
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 3739 cylinders,
    63 sectors. Partition offset: 39552093 sectors.
    Setup length is 10 sectors.
    Mapped 1887 sectors.
    Mapping RAM disk /boot/initrd.suse
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 3739 cylinders,
    63 sectors. Partition offset: 39552093 sectors.
    RAM disk: 979 sectors.
    Added failsafe

    "ro root=1607 ide=nodma apm=off acpi=off"

    Boot other: /dev/hdc1, on /dev/hdc, loader /boot/chain.b
    bios_dev: device 1601
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1601: BIOS drive 0x80, 255 heads, 3739 cylinders,
    63 sectors. Partition offset: 63 sectors.
    bios_dev: device 1600
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1600: BIOS drive 0x80, 255 heads, 3739 cylinders,
    63 sectors. Partition offset: 0 sectors.
    Mapped 6 (4+1+1) sectors.
    Added windows

    "ro hdd=ide-scsi"

    Boot image: /boot/memtest.bin
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 3739 cylinders,
    63 sectors. Partition offset: 39552093 sectors.
    Setup length is 4 sectors.
    Mapped 151 sectors.
    Added memtest86

    "ro hdd=ide-scsi"

    Map file size: 40960 bytes.
    The boot sector and the map file have *NOT* been altered.
    -------------------------------------------------------------------------------

    1.11 hwinfo --storage_ctrl/disk


    --- hwinfo --storage_ctrl ---

    10: None 00.0: 0102 Floppy disk controller
    [Created at misc.284]
    Unique ID: rdCR.3wRL2_g4d2B
    Hardware Class: storage
    Model: "Floppy disk controller"
    I/O Ports: 0x3f0-0x3f5 (rw)
    DMA: 2
    IRQ: 6 (108 events)
    I/O Port: 0x3f7 (rw)

    17: PCI 02.5: 0101 IDE interface
    [Created at pci.65]
    Unique ID: JCE+.ePePJlRjEX3
    Hardware Class: storage
    Model: "Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)"
    Vendor: 1039 "Silicon Integrated Systems [SiS]"
    Device: 5513 "5513 [IDE]"
    SubVendor: 1039 "Silicon Integrated Systems [SiS]"
    SubDevice: 5513 "SiS5513 EIDE Controller (A,B step)"
    Revision: 0xd0
    I/O Ports: 0xff00-0xff0f (rw)
    I/O Ports: 0x1f0-0x1f7 (rw)
    I/O Port: 0x3f6 (rw)
    I/O Ports: 0x170-0x177 (rw)
    I/O Port: 0x376 (rw)
    IRQ: 14 (118 events)
    IRQ: 15 (15468 events)

    --- hwinfo --disk ---

    11: IDE 02.0: 10600 Disk
    [Created at ide.122]
    Unique ID: hY5p.xNzhHPrx9B5
    Hardware Class: disk
    Model: "WDC WD307AA"
    Device: "WDC WD307AA"
    Revision: "05.05B05"
    Serial ID: "WD-WMA111287033"
    Driver: "ide-disk"
    Device File: /dev/hdc
    Geometry (Physical): CHS 59598/16/63
    Geometry (Logical): CHS 3739/255/63
    Size: 60074784 sectors a 512 bytes
    Cache: 2048 kb
    Attached to: #6 (IDE interface)

    12: IDE 03.0: 10600 Disk
    [Created at ide.122]
    Unique ID: 8kLt.nOdbRjyUCHD
    Hardware Class: disk
    Model: "Maxtor 86480D6"
    Device: "Maxtor 86480D6"
    Revision: "NAVX171F"
    Serial ID: "L60H9FQA"
    Driver: "ide-disk"
    Device File: /dev/

    ii) aktuell:

    1. Hardware

    -------------------------------------------------------------------------------

    1.1 procinfo

    Linux 2.4.18-4GB (root@Pentium.suse.de) (gcc 2.95.3 20010315 ) #1 1CPU [linux.]

    Memory: Total Used Free Shared Buffers Cached
    Mem: 255408 176704 78704 0 5884 111284
    Swap: 200772 0 200772

    Bootup: Sun Jan 5 22:24:32 2003 Load average: 0.34 0.20 0.13 2/65 3120

    user : 0:00:56.95 3.5% page in : 115213 disk 1: 110r 14w
    nice : 0:00:01.56 0.1% page out: 24163 disk 2: 10451r 3999w
    system: 0:00:19.29 1.2% swap in : 1
    idle : 0:26:04.74 95.3% swap out: 0
    uptime: 0:27:22.53 context : 722446

    irq 0: 164254 timer irq 8: 2 rtc
    irq 1: 497 keyboard irq 11: 1365 usb-ohci, usb-ohci,
    irq 2: 0 cascade [4] irq 12: 94398 PS/2 Mouse
    irq 3: 94 irq 14: 128 ide0
    irq 4: 13 irq 15: 14438 ide1
    irq 6: 160

    -------------------------------------------------------------------------------

    1.2 Hardisk

    -------------------------------------------------------------------------------
    1.2 Partitions

    Disk /dev/hdc: 255 heads, 63 sectors, 10011 cylinders
    Units = cylinders of 16065 * 512 bytes

    Device Boot Start End Blocks Id System
    /dev/hdc1 * 1 518 4160803+ b Win95 FAT32
    /dev/hdc2 519 10011 76252522+ f Win95 Ext'd (LBA)
    /dev/hdc5 519 2499 15912351 b Win95 FAT32
    /dev/hdc6 2500 2524 200781 82 Linux swap
    /dev/hdc7 2525 3835 10530576 83 Linux
    /dev/hdc8 3836 4340 4056381 b Win95 FAT32
    /dev/hdc9 4341 6272 15518758+ b Win95 FAT32
    /dev/hdc10 6273 10011 30033486 b Win95 FAT32
    -------------------------------------------------------------------------------

    1.3 Mountpoints

    /dev/root / ext2 rw 0 0
    proc /proc proc rw 0 0
    devpts /dev/pts devpts rw 0 0
    shmfs /dev/shm shm rw 0 0
    usbdevfs /proc/bus/usb usbdevfs rw 0 0
    -------------------------------------------------------------------------------

    1.4 /boot

    total 3720
    drwxr-xr-x 2 root root 4096 Jan 5 22:51 .
    drwxr-xr-x 20 root root 4096 Jan 5 2003 ..
    -rw-r--r-- 1 root root 375421 Mar 27 2002 System.map-2.4.18-4GB
    -rw-r--r-- 1 root root 9128 Mar 25 2002 boot-bmp.b
    -rw-r--r-- 1 root root 9240 Mar 25 2002 boot-menu.b
    -rw-r--r-- 1 root root 7480 Mar 25 2002 boot-text.b
    -rw-r--r-- 1 root root 512 Oct 21 21:33 boot.1600
    -rw-r--r-- 1 root root 512 Oct 21 21:33 boot.1607
    lrwxrwxrwx 1 root root 11 Oct 21 21:22 boot.b -> boot-menu.b
    -rw-r--r-- 1 root root 728 Mar 25 2002 chain.b
    -rw-r--r-- 1 root root 505328 Oct 21 21:33 initrd
    -rw-r--r-- 1 root root 500848 Oct 21 21:33 initrd.suse
    -rw-r--r-- 1 root root 5181 Oct 21 21:33 lilo.log
    -rw------- 1 root root 41472 Jan 5 22:23 map
    -rw------- 1 root root 41472 Oct 21 21:33 map2
    -rw-r--r-- 1 root root 512 Mar 25 2002 mbr.b
    -rw-r--r-- 1 root root 76288 Mar 25 2002 memtest.bin
    -rw-r--r-- 1 root root 81988 Mar 25 2002 message
    -rw-r--r-- 1 root root 656 Mar 25 2002 os2_d.b
    -rw-r--r-- 1 root root 964815 Mar 27 2002 vmlinuz
    -rw-r--r-- 1 root root 82994 Mar 27 2002 vmlinuz.autoconf.h
    -rw-r--r-- 1 root root 40799 Mar 27 2002 vmlinuz.config
    -rw-r--r-- 1 root root 964815 Oct 21 21:25 vmlinuz.suse
    -rw-r--r-- 1 root root 130 Mar 27 2002 vmlinuz.version.h
    -------------------------------------------------------------------------------

    1.5 kernel



    #
    # This variable contains the list of modules to be added to the initial
    # ramdisk by calling the script "mk_initrd"
    # (like drivers for scsi-controllers, for lvm or reiserfs)
    #
    INITRD_MODULES="ide-scsi"


    -------------------------------------------------------------------------------

    1.6 /etc/fstab


    /dev/hdc7 / ext2 defaults 1 2
    /dev/cdrecorder /media/cdrecorder auto ro,noauto,user,exec 0 0
    /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
    devpts /dev/pts devpts defaults 0 0
    /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0
    /dev/fd0 /media/floppy auto noauto,user,sync 0 0
    proc /proc proc defaults 0 0
    usbdevfs /proc/bus/usb usbdevfs noauto 0 0
    /dev/hdc1 /windows/C vfat noauto,user 0 0
    /dev/hdd1 /windows/D vfat noauto,user 0 0
    /dev/hdc5 /windows/E vfat noauto,user 0 0
    /dev/hdc6 swap swap pri=42 0 0


    -------------------------------------------------------------------------------

    1.7 boot.msg
    Inspecting /boot/System.map-2.4.18-4GB
    Loaded 12771 symbols from /boot/System.map-2.4.18-4GB.
    Symbols match kernel version 2.4.18.
    Loaded 47 symbols from 2 modules.
    klogd 1.4.1, log source = ksyslog started.
    <4>Linux version 2.4.18-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002

    . . .



    -------------------------------------------------------------------------------

    1.8 SCSI

    Attached devices: none
    -------------------------------------------------------------------------------

    1.9 CD/DVD Links

    -------------------------------------------------------------------------------

    --- /cd - /dvd ---
    lrwxrwxrwx 1 root root 17 Oct 21 21:32 cdrecorder -> /media/cdrecorder
    lrwxrwxrwx 1 root root 12 Oct 21 21:32 cdrom -> /media/cdrom
    lrwxrwxrwx 1 root root 10 Oct 21 21:32 dvd -> /media/dvd

    --- /media/ ---
    total 16
    drwxr-xr-x 2 root root 4096 Oct 21 21:32 cdrecorder
    drwxr-xr-x 2 root root 4096 Mar 21 2002 cdrom
    drwxr-xr-x 4 root root 4096 Dec 7 15:09 dvd
    drwxr-xr-x 2 root root 4096 Mar 21 2002 floppy

    --- /dev/cdr* ---
    lrwxrwxrwx 1 root root 8 Oct 21 21:32 /dev/cdrecorder -> /dev/sr0
    lrwxrwxrwx 1 root root 8 Oct 21 21:32 /dev/cdrom -> /dev/hda

    --- /dev/dvd* ---
    lrwxrwxrwx 1 root root 8 Oct 21 21:32 /dev/dvd -> /dev/hda
    -------------------------------------------------------------------------------

    1.10 lilo test

    LILO version 22.1 (test mode), Copyright (C) 1992-1998 Werner Almesberger
    Development beyond version 21 Copyright (C) 1999-2001 John Coffman
    Released 31-Oct-2001 and compiled at 20:50:13 on Mar 25 2002.
    MAX_IMAGES = 27

    raid_setup returns offset = 00000000
    Reading boot sector from /dev/hdc
    Merging with /boot/boot.b
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 10011 cylinders,
    63 sectors. Partition offset: 40548123 sectors.
    Secondary loader: 18 sectors.
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 10011 cylinders,
    63 sectors. Partition offset: 40548123 sectors.
    Mapping message file /boot/message
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 10011 cylinders,
    63 sectors. Partition offset: 40548123 sectors.
    Message: 161 sectors.
    Boot image: /boot/vmlinuz
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 10011 cylinders,
    63 sectors. Partition offset: 40548123 sectors.
    Setup length is 10 sectors.
    Mapped 1887 sectors.
    Mapping RAM disk /boot/initrd
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 10011 cylinders,
    63 sectors. Partition offset: 40548123 sectors.
    RAM disk: 987 sectors.
    Added linux *

    "ro root=1607 hdd=ide-scsi"

    Boot image: /boot/vmlinuz.suse
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 10011 cylinders,
    63 sectors. Partition offset: 40548123 sectors.
    Setup length is 10 sectors.
    Mapped 1887 sectors.
    Mapping RAM disk /boot/initrd.suse
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 10011 cylinders,
    63 sectors. Partition offset: 40548123 sectors.
    RAM disk: 979 sectors.
    Added failsafe

    "ro root=1607 ide=nodma apm=off acpi=off"

    Boot other: /dev/hdc1, on /dev/hdc, loader /boot/chain.b
    bios_dev: device 1601
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1601: BIOS drive 0x80, 255 heads, 10011 cylinders,
    63 sectors. Partition offset: 63 sectors.
    bios_dev: device 1600
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1600: BIOS drive 0x80, 255 heads, 10011 cylinders,
    63 sectors. Partition offset: 0 sectors.
    Mapped 6 (4+1+1) sectors.
    Added windows

    "ro hdd=ide-scsi"

    Boot image: /boot/memtest.bin
    bios_dev: device 1607
    bios_dev: masked device 1600, which is /dev/hdc
    bios_dev: geometry check found 0 matches
    bios_dev: PT match found 1 match (0x80)
    Device 0x1607: BIOS drive 0x80, 255 heads, 10011 cylinders,
    63 sectors. Partition offset: 40548123 sectors.
    Setup length is 4 sectors.
    Mapped 151 sectors.
    Added memtest86

    "ro hdd=ide-scsi"

    Map file size: 40960 bytes.
    The boot sector and the map file have *NOT* been altered.
    -------------------------------------------------------------------------------

    1.11 hwinfo --storage_ctrl/disk


    --- hwinfo --storage_ctrl ---

    16: PCI 02.5: 0101 IDE interface
    [Created at pci.65]
    Unique ID: JCE+.ePePJlRjEX3
    Hardware Class: storage
    Model: "Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)"
    Vendor: 1039 "Silicon Integrated Systems [SiS]"
    Device: 5513 "5513 [IDE]"
    SubVendor: 1039 "Silicon Integrated Systems [SiS]"
    SubDevice: 5513 "SiS5513 EIDE Controller (A,B step)"
    Revision: 0xd0
    I/O Ports: 0xff00-0xff0f (rw)
    I/O Ports: 0x1f0-0x1f7 (rw)
    I/O Port: 0x3f6 (rw)
    I/O Ports: 0x170-0x177 (rw)
    I/O Port: 0x376 (rw)
    IRQ: 14 (128 events)
    IRQ: 15 (14574 events)

    --- hwinfo --disk ---

    11: IDE 02.0: 10600 Disk
    [Created at ide.122]
    Unique ID: hY5p.9OWt7rQSf81
    Hardware Class: disk
    Model: "IC35L080AVVA07-0"
    Device: "IC35L080AVVA07-0"
    Revision: "VA4OA52A"
    Serial ID: "VNC402A4DMPLZG"
    Driver: "ide-disk"
    Device File: /dev/hdc
    Geometry (Physical): CHS 39420/16/255
    Geometry (Logical): CHS 10011/255/63
    Size: 160836480 sectors a 512 bytes
    Cache: 1863 kb
    Attached to: #6 (IDE interface)

    12: IDE 03.0: 10600 Disk
    [Created at ide.122]
    Unique ID: 8kLt.nOdbRjyUCHD
    Hardware Class: disk
    Model: "Maxtor 86480D6"
    Device: "Maxtor 86480D6"
    Revision: "NAVX171F"
    Serial ID: "L60H9FQA"
    Driver: "(none)"
    Device File: /dev/hdd
    Drive status: no medium
    Attached to: #6 (IDE interface)
    -------------------------------------------------------------------------------

    3. Configuration

    -------------------------------------------------------------------------------

    2.1 /etc/lilo.conf



    # Modified by YaST2. Last modification on Sun Jan 5 22:23:42 2003


    boot = /dev/hdc
    vga = 788
    read-only
    menu-scheme = Wg:kw:Wg:Wg
    lba32
    prompt
    timeout = 150
    message = /boot/message
    append = "hdd=ide-scsi"

    image = /boot/vmlinuz
    label = linux
    initrd = /boot/initrd
    root = /dev/hdc7

    image = /boot/vmlinuz.suse
    label = failsafe
    append = "ide=nodma apm=off acpi=off"
    initrd = /boot/initrd.suse
    optional
    root = /dev/hdc7

    other = /dev/hdc1
    label = windows
    table = /dev/hdc

    image = /boot/memtest.bin
    label = memtest86


    -------------------------------------------------------------------------------




    Wer kann helfen? Was kann ich tun?

    Meines Wissens gibt es unter Suse keine Werkzeuge zur automatischen Hardwareerkennung nach bereits erfolgter Installation.

    Gruss


    [COLOR=red][COLOR=firebrick][COLOR=darkred][COLOR=green][COLOR=darkred][COLOR=firebrick][COLOR=red][COLOR=crimson][COLOR=orangered][COLOR=orange][COLOR=orangered][COLOR=crimson][COLOR=red]
    Geändert von mick_l (08.01.03 um 19:12 Uhr)

  2. #2
    Registrierter Benutzer
    Registriert seit
    Aug 2002
    Beiträge
    7

    Thumbs up Re: Suse 8.0 Hardware-Änderungen nach Installation

    Datum: Mon, 6 Jan 2003 10:11:40 +0100

    ich würde vermuten, dass es in lilo.conf

    append = "hdb=ide-scsi"

    heißen müsste, weil der Brenner am Device hdb (und nicht hdd) hängt.

    Möglicherweise gibt es auch andere Probleme, aber ich habe einfach nicht
    die Zeit, jetzt alle Einstellungen nachzuvollziehen.

    Mit freundlichen Grüßen

    Michael Kofler

    http://www.kofler.cc


  3. #3
    Registrierter Benutzer
    Registriert seit
    Aug 2002
    Beiträge
    7

    Question Suse 8.0 Hardware-Änderungen nach Installation

    ganz herzlichen Dank für die Hilfe. Der Tip mit dem falschen Eintrag in der lilo.conf war ein voller Erfolg.
    Ich habe den Eintrag geändert auf

    append = "hdb=ide-scsi"

    Der Brenner und die 2. IDE Festplatte (alles vorher schon installiert) kann jetzt wieder gemountet werden.

    Leider habe ich nicht herausbekommen können, warum nicht alle Partitionen der Neuen Platte (hdc) ansprechbar sind.


    Wer hat da vielleicht noch eine Idee ??


    Mit freundlichen Grüßen

    Mick


Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •