Mein OCCT hat 240 Fehler bei VRAM angezeigt. Aber keine Details dazu. Versuche noch die restlichen Tests durchlaufen zu lassen.
Mein OCCT hat 240 Fehler bei VRAM angezeigt. Aber keine Details dazu. Versuche noch die restlichen Tests durchlaufen zu lassen.
Das OCCT-Programm zeigte mir nach 10 Min. Laufzeit 240 Fehler an. Beim 2. Durchlauf waren es nur noch 184 Fehler.
Habe noch ein Programm Device Monitoring Studio. Ist auf Englisch. Kennt jemand das Programm? Wozu ist es gut?
Habe mal was laufen lassen. Weiß nicht was dabei rauskommt.
Mein USB-Stick hatte ich gemountet mit der Anwendung Parted Magic Mount.Code:Welcome - Parted Magic (Linux 5.5.4-pmagic64) root@PartedMagic:~# dd if=/dev/sda3 of=/media/sdc1/sdc1.img status=progress 180552192 bytes (181 MB, 172 MiB) copied, 148.464 s, 1.2 MB/s dd: writing to '/media/sdc1/sdc1.img': Input/output error 352642+0 records in 352641+0 records out 180552192 bytes (181 MB, 172 MiB) copied, 148.506 s, 1.2 MB/s root@PartedMagic:~#
Jetzt habe ich einen Input/output error. Was kann das sein?Code:root@PartedMagic:~# mount gvfsd-fuse on /root/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev) gvfsd-fuse on /root/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev) /dev/sdc1 on /media/sdc1 type fuseblk (rw,allow_other,blksize=4096) root@PartedMagic:~# ls -l /media/sdc1 ls: reading directory '/media/sdc1': Input/output error total 0 root@PartedMagic:~#
Code:root@PartedMagic:~# mount gvfsd-fuse on /root/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev) gvfsd-fuse on /root/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev) /dev/sdc1 on /media/sdc1 type fuseblk (rw,allow_other,blksize=4096) root@PartedMagic:~# umount /media/sdc1 root@PartedMagic:~# mount /dev/sda3 /media/sdc1 mount: /media/sdc1: mount point does not exist. root@PartedMagic:~#
Obwohl der Stick unverändert eingesteckt ist, kann ich ihn nicht mehr mounten. Oder was mache ich falsch?Code:root@PartedMagic:~# fdisk -l Disk /dev/loop0: 137.6 MiB, 144240640 bytes, 281720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/loop1: 34.5 MiB, 36155392 bytes, 70616 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/loop252: 151.9 MiB, 159244288 bytes, 311024 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/loop253: 32.8 MiB, 34328576 bytes, 67048 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/loop254: 501.3 MiB, 525651968 bytes, 1026664 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/sda: 477 GiB, 512110190592 bytes, 1000215216 sectors Disk model: SanDisk SDSSDH3 Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x223157af Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 1126399 1124352 549M 7 HPFS/NTFS/exFAT /dev/sda2 1126400 411328511 410202112 195.6G 7 HPFS/NTFS/exFAT /dev/sda3 411328512 996020223 584691712 278.8G 83 Linux /dev/sda4 996020224 1000215215 4194992 2G 82 Linux swap root@PartedMagic:~#
Danke.
Jetzt habe ich mal eine USB-Festplatte eingehängt. Jetzt scheint es zu gehen:
Code:Disk /dev/sdc: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors Disk model: 42AS Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x90d156e1 Device Boot Start End Sectors Size Id Type /dev/sdc1 2048 3907028991 3907026944 1.8T 7 HPFS/NTFS/exFAT root@PartedMagic:/media/sdc1/SSD-Platte# dd if=/dev/sda3 of=sda3.img status=progress
Mein dd-Kommando ist durchgelaufen. Lasse gerade ein
durchlaufen.Code:cmp sda3.img /dev/sda3
Evtl. ist doch der USB-Stick futsch. Wie kann ich den testen?
LG
Heiko
So, cmp ist ohne Fehler gelaufen.
Habe die Imagedatei sda3.img gemountet:
Wieso sehe ich unter /sda3 kein home-Verzeichnis?Code:root@PartedMagic:/media/sdc1/SSD-Platte# mkdir /sda3 root@PartedMagic:/media/sdc1/SSD-Platte# mount -o loop sda3.img /sda3 root@PartedMagic:/media/sdc1/SSD-Platte# ls -l /sda3 total 0 drwxr-xr-x 1 root root 1846 Jan 30 17:44 bin drwxr-xr-x 1 root root 1402 Jan 30 18:23 boot drwxr-xr-x 1 root root 5616 Jan 30 17:49 etc drwxr-xr-x 1 root root 88 May 17 2020 lib drwxr-xr-x 1 root root 3604 Jan 30 17:45 lib64 drwxr-xr-x 1 root root 4916 Jan 30 17:49 sbin drwxr-xr-x 1 root root 0 Feb 5 22:51 sda1 drwxr-xr-x 1 root root 0 Feb 5 22:51 sda2 drwxr-xr-x 1 root root 0 Feb 5 22:51 sda3 drwxr-xr-x 1 root root 0 Feb 5 22:51 sda4 drwxr-xr-x 1 root root 0 Feb 5 22:51 sr0 drwxr-xr-x 1 root root 104 Mar 13 2019 usr root@PartedMagic:/media/sdc1/SSD-Platte# ls -l /sda3/home ls: cannot access '/sda3/home': No such file or directory root@PartedMagic:/media/sdc1/SSD-Platte#
Danke, LG
weil es dort keins gibt, du kannst dort ja mal in /media/sdc1/SSD-Platte/etc/fstab schaun, wo /home herkommt
Gruß nopes
(,,,)---(^.^)---(,,,) /var/log/messages | grep cat
Lesen bildet, auch bei mir.....
Falscher Post von mir
Parted Magic neu gebootet. Jetzt spinnt das System total.
Warum wird hier HPFS/NTFS/exFAT angezeigt, die Anwendung Parted Magic Mount und GParted zeigt bei /dev/sdc1 aber ext4 an.Code:root@PartedMagic:~# fdisk -l /dev/sdc Disk /dev/sdc: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors Disk model: 42AS Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x90d156e1 Device Boot Start End Sectors Size Id Type /dev/sdc1 2048 3907028991 3907026944 1.8T 7 HPFS/NTFS/exFAT root@PartedMagic:~#
Da stimmt doch was nicht.
root@PartedMagic:~# cd /media/sdc1/SSD-Platte
root@PartedMagic:/media/sdc1/SSD-Platte# ls
sda3.img
root@PartedMagic:/media/sdc1/SSD-Platte# mkdir /sda3
root@PartedMagic:/media/sdc1/SSD-Platte# mount -o loop sda3.img /sda3
mount: /sda3: mount(2) system call failed: File exists.
root@PartedMagic:/media/sdc1/SSD-Platte#
Was soll das eigentlich alles?
Installier dir eine Version und kopiert dir hinüber was du benötigst.
Was das soll weiß ich auch nicht. Wie bei #24 geschrieben wollte ich was nachgucken. Und jetzt kann ich das Image sda3.img nicht mehr mounten.
Lesezeichen