Hallo ich habe ein Raspberry pi 2,mit frisch aufgesetztem Debian.
nun habe ich Probleme mit der Konfiguration mit dem W-lan stick (Edimax) bin nach folgender Anleitung vorgegangen !:
http://www.randombrick.de/raspberry-...an-einrichten/
1.in den ordner :sudo nano /etc/modprobe.d/8192cu.conf ----->eingabe war : options 8192cu rtw_power_mgnt=0 rtw_enusbss=0
2.in den Ordner:sudo nano /etc/network/interfaces
eingabe war :
auto lo
iface lo inet loopback
iface eth0 inet dhcp
auto wlan0
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp
3.sudo nano /etc/wpa_supplicant/wpa_supplicant.conf
eingabe :
ctrl_interface=DIR=/var/run/wpa_supplicant
GROUP=netdev
update_config=1
network={
ssid=”FRITZ!BOX_7362_SL”
psk=”12345678910”
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP
auth_alg=OPEN
}
(Wenn ich bei meinem Router auf Eigenschaften klicke steht da WPA2-Personal,und Verschlüsselungstyp: AES).Man kann da eigentlich nicht viel falsch machen habe es aber trotzdem nicht hinbekommen....Ich weiß nicht was ich falsch habe ??
Lesezeichen