a) Bitte siehe meine Sig wg. code-Tags. Hatte ich bereits erwähnt.
b) fsck sollte nur auf ungemounteten Devices laufen. Probier mal "fsck /dev/hdb3"
c) unter Bezug auf DrunkenFreak: Beachte den führenden "/".
Kreol
a) Bitte siehe meine Sig wg. code-Tags. Hatte ich bereits erwähnt.
b) fsck sollte nur auf ungemounteten Devices laufen. Probier mal "fsck /dev/hdb3"
c) unter Bezug auf DrunkenFreak: Beachte den führenden "/".
Kreol
Geändert von kreol (30.04.12 um 17:00 Uhr)
Beim posten von Dateien oder Ausgaben bitte [code]Text[/code] verwenden. Nähere Info über vB-Tags gibt es hier
I just want to know God's thoughts. The rest are details. (A. Einstein)
Hallo kreol
Code:root@ttyp0[knoppix]# fsck /dev/hdb3 fsck 1.34-WIP (21-May-2003) reiserfsck 3.6.11 (2003 www.namesys.com) ************************************************************* ** If you are using the latest reiserfsprogs and it fails ** ** please email bug reports to reiserfs-list@namesys.com, ** ** providing as much information as possible -- your ** ** hardware, kernel, patches, settings, all reiserfsck ** ** messages (including version), the reiserfsck logfile, ** ** check the syslog file for any related information. ** ** If you would like advice on using this program, support ** ** is available for $25 at www.namesys.com/support.html. ** ************************************************************* Will read-only check consistency of the filesystem on /dev/hdb3 Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ****************************************************** * Warning: The dma on your hard drive is turned off. * * This may really slow down the fsck process. * ****************************************************** ########### reiserfsck --check started at Tue May 1 10:26:47 2012 ########### Replaying journal.. 0 transactions replayed Checking internal tree../ 1 (of 2)/ 1 (of 126)block 34555: The level of the node (0) is not correct, (2) expected the problem in the internal node occured (34555), whole subtree is skipped finished Comparing bitmaps..vpf-10640: The on-disk and the correct bitmaps differs. Bad nodes were found, Semantic pass skipped 1 found corruptions can be fixed only when running with --rebuild-tree ########### reiserfsck finished at Tue May 1 10:29:00 2012 ###########
Gruß,
Superjogger
Hallo kreol,
Code:root@ttyp0[knoppix]# fsck /dev/hdb3 fsck 1.34-WIP (21-May-2003) reiserfsck 3.6.11 (2003 www.namesys.com) ************************************************************* ** If you are using the latest reiserfsprogs and it fails ** ** please email bug reports to reiserfs-list@namesys.com, ** ** providing as much information as possible -- your ** ** hardware, kernel, patches, settings, all reiserfsck ** ** messages (including version), the reiserfsck logfile, ** ** check the syslog file for any related information. ** ** If you would like advice on using this program, support ** ** is available for $25 at www.namesys.com/support.html. ** ************************************************************* Will read-only check consistency of the filesystem on /dev/hdb3 Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ****************************************************** * Warning: The dma on your hard drive is turned off. * * This may really slow down the fsck process. * ****************************************************** ########### reiserfsck --check started at Tue May 1 10:26:47 2012 ########### Replaying journal.. 0 transactions replayed Checking internal tree../ 1 (of 2)/ 1 (of 126)block 34555: The level of the node (0) is not correct, (2) expected the problem in the internal node occured (34555), whole subtree is skipped finished Comparing bitmaps..vpf-10640: The on-disk and the correct bitmaps differs. Bad nodes were found, Semantic pass skipped 1 found corruptions can be fixed only when running with --rebuild-tree ########### reiserfsck finished at Tue May 1 10:29:00 2012 ###########
Gruß,
Superjogger
Hallo kreol,
Code:root@ttyp0[knoppix]# fsck /dev/hdb3 fsck 1.34-WIP (21-May-2003) reiserfsck 3.6.11 (2003 www.namesys.com) ************************************************************* ** If you are using the latest reiserfsprogs and it fails ** ** please email bug reports to reiserfs-list@namesys.com, ** ** providing as much information as possible -- your ** ** hardware, kernel, patches, settings, all reiserfsck ** ** messages (including version), the reiserfsck logfile, ** ** check the syslog file for any related information. ** ** If you would like advice on using this program, support ** ** is available for $25 at www.namesys.com/support.html. ** ************************************************************* Will read-only check consistency of the filesystem on /dev/hdb3 Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ****************************************************** * Warning: The dma on your hard drive is turned off. * * This may really slow down the fsck process. * ****************************************************** ########### reiserfsck --check started at Tue May 1 10:41:10 2012 ########### Replaying journal.. 0 transactions replayed Checking internal tree../ 1 (of 2)/ 1 (of 126)block 34555: The level of the node (0) is not correct, (2) expected the problem in the internal node occured (34555), whole subtree is skipped finished Comparing bitmaps..vpf-10640: The on-disk and the correct bitmaps differs. Bad nodes were found, Semantic pass skipped 1 found corruptions can be fixed only when running with --rebuild-tree ########### reiserfsck finished at Tue May 1 10:43:12 2012 ########### root@ttyp0[knoppix]#
Gruß,
Superjogger
hallo kreol,
ich habe Probleme, das in code auszugeben,
hier mein letzter Versuch (Zeilenanzahl begrenzt ?)
ich denke, man kann trotzden erkennen.Bitte meine letzten Versionen löschen Danke ! Und nochmals sorry !
Gruß,
Superjogger
Code:root@ttyp0[knoppix]# fsck /dev/hdb3 fsck 1.34-WIP (21-May-2003) reiserfsck 3.6.11 (2003 www.namesys.com) Will read-only check consistency of the filesystem on /dev/hdb3 Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ****************************************************** * Warning: The dma on your hard drive is turned off. * * This may really slow down the fsck process. * ****************************************************** ########### reiserfsck --check started at Tue May 1 10:53:17 2012 ########### Replaying journal.. 0 transactions replayed Checking internal tree../ 1 (of 2)/ 1 (of 126)block 34555: The level of thenode (0) is not correct, (2) expected the problem in the internal node occured (34555), whole subtree is skipped finished Comparing bitmaps..vpf-10640: The on-disk and the correct bitmaps differs. Bad nodes were found, Semantic pass skipped 1 found corruptions can be fixed only when running with --rebuild-tree ########### reiserfsck finished at Tue May 1 10:55:14 2012 ###########
Geändert von Superjogger (01.05.12 um 08:48 Uhr)
Schon probiert was fsck empfiehlt?Was sagt dann ein korrekt ausgeführtes mount?Code:... Bad nodes were found, Semantic pass skipped 1 found corruptions can be fixed only when running with --rebuild-tree
Kreol
Beim posten von Dateien oder Ausgaben bitte [code]Text[/code] verwenden. Nähere Info über vB-Tags gibt es hier
I just want to know God's thoughts. The rest are details. (A. Einstein)
Hallo kreol,
Findet das Verzeichnis nicht !Code:root@ttyp0[knoppix]# mount /dev/hdb3 mount: Ist kein Verzeichnis
Gruß,
Superjogger
Hallo kreol,
habe auch das gemacht:
Gruß,Code:root@ttyp1[knoppix]# fsck /dev/hdb3--rebuild-tree fsck 1.34-WIP (21-May-2003) e2fsck 1.34-WIP (21-May-2003) fsck.ext2: Datei oder Verzeichnis nicht gefunden while trying to open /dev/hdb3- -rebuild-tree Der SuperBlock ist unlesbar bzw. beschreibt kein gültiges ext2 Dateisystem. Wenn das Gerät gültig ist und ein ext2 Dateisystem (kein swap oder ufs usw.) enthält , dann ist der SuperBlock beschädigt, und sie könnten e2fsck mit einem anderen SuperBlock: e2fsck -b 8193 <Gerät>
Superjogger
Nicht nur posten, sondern auch lesen was drin steht und ggfs. die Empfehlungen umsetzen.
Gemountet wird anders. Siehe dazu auch "man mount".
Ohne zumindest rudimentäre Linuxkenntnisse wirst du hier nicht weiterkommen. Bereitschaft zum Lesen und und selbst die kleinen Dinge, die es hier nunmal sind, in Erfahrung bringen, wirst du nicht sonderlich weit kommen.
Zum fsck:
Da steht doch alles. man fsck hilft i. Zw. weiter. Die 8193 für das in der Meldung genannte e2fsck sind aber nur ein Beispiel für die Option -b. Wo beim seinerzeitigen Formatieren der Partition vermutlich weitere SuperBlocks angelegt wurden sagt "mke2fs -n /dev/hdb3". Vorher die Manpage lesen!.
Ist es überhaupt ein Ext2/3? Was sagt als root ein "file -s /dev/hdb3"?
Zum mount:
Wenn /dev/hdb3 nicht in der fstab steht brauchst Du ein Ziel. Z.B. "mount /dev/hdb3 /mnt". Bevor das FS aber nicht geflickt ist wird das schwer. Evtl. liefert es aber Meldungen...
Kreol
P.S.
Warum eigentlich hdb3? Wie alt ist Dein Knoppix?
P.P.S.
Vor das --rebuild-tree gehört ein Leerzeichen
Geändert von kreol (01.05.12 um 12:53 Uhr)
Beim posten von Dateien oder Ausgaben bitte [code]Text[/code] verwenden. Nähere Info über vB-Tags gibt es hier
I just want to know God's thoughts. The rest are details. (A. Einstein)
Zusammenfassend mal ein kurzer Ablaufplan, so wie ich die Sache angehen würde:
- Eine aktuelle Knoppix/grml besorgen. Vermutlich wird aus hdb dann sdb.
- "fdisk -l" ausführen und die Plattenbelegung notieren. Im folgenden gehe ich davon aus, dass / des Problemsystems auf /dev/sdb3 liegt.
- "file -s /dev/sdb3" ausführen.
- "fsck /dev/sdb3" ausführen.
- Je nach der Meldung "fsck --rebuild-tree /dev/sdb3" ausführen.
- Falls 2. ein Ext erkannt hat, je nach Meldung "mke2fs -n /dev/sdb3" ausführen.
- Die mutmasslichen SuperBlöcke notieren und "e2fsck -b $SUPERBLOCK /dev/sdb3" ausführen.
- "mount /dev/sdb3 /mnt" ausführen.
- "ls -la /mnt" ausführen.
Bei allem gilt: Befehl und Meldung des Systems sorgfältig lesen und im Zweifel hierher posten. Vieles wird Dir aber schon vom System gemeldet.
Sorry, aber genauer bekomme ich es wirklich nicht hin.
Kreol
Beim posten von Dateien oder Ausgaben bitte [code]Text[/code] verwenden. Nähere Info über vB-Tags gibt es hier
I just want to know God's thoughts. The rest are details. (A. Einstein)
Noch ein Hint: DrunkenFreak aka Mantichora und meine Wenigkeit besprechen Dein Prob gerade im IRC. Du kannst Dich ja mal auf irc.freenode.net #linuxforen.de einfinden.
Und ja: Die Werbung für den Chan ist durchaus beabsichtigt
Kreol
Beim posten von Dateien oder Ausgaben bitte [code]Text[/code] verwenden. Nähere Info über vB-Tags gibt es hier
I just want to know God's thoughts. The rest are details. (A. Einstein)
Liebe Linuxkollegen,
vielen Dank an Euch bezgl. der Infos, mein System läuft wieder.
Ja, das mit den Linuxkenntnissen , da fehlt mir noch einiges, aber die Zeit .......
ich versuchh`s ja !
Nach --rebuild -tree 1.Lauf bleib der bei 80 % stehen und verabschiedett sich.
Dann ein 2. Mal probiert und er lief ziemlich lange duch und hat alles wieder aufgebaut.
Yeah, ich bin happy, jetzt mache ich als erstes ein image backup, was würdet Ihr empfehlen, partimage ?
Gruß,
Superjogger
Schön, wenn es funktioniert.
Aber neue Frage -> neuer Thread und zum Thema Backup gibt die SuFu des Boards auch einiges her...
Falls nach der Lektüre der geschätzten 1E+03 zu diesem Thema bereits existierenden Threads noch Fragen offen sind mach bitte was Neues auf.
Kreol
Beim posten von Dateien oder Ausgaben bitte [code]Text[/code] verwenden. Nähere Info über vB-Tags gibt es hier
I just want to know God's thoughts. The rest are details. (A. Einstein)
Tag nochmal,
habe jetzt grub error 17 Fehler ,
nach Ausführung der Punkte 6/7 von kreol v. 01.05.2012
folgen Meldungen mit Superblöcken, worin Sicherungen gemacht wurden ,
die restlichen Punkte 7-9 habe ich auch ausgeführt, allerdings wird die root partition beim mounten nicht gefunden .
Was kann ich sonst noch machen ?Ich denke , es hänt miit Antivir zusammen, da er vorher nach Abhängen des Netzkabels gemeckert hat.
Gruß,
Superjogger
Lesezeichen