Hallo Zusammen,

mein PCMCIA-WLAN-Adapter ´ Lucent WaveLAN´ funktioniert in einem Notebook (AMILO) einwandfrei, sowohl mit Yast als auch mit KNetworkManager eingerichtet. In einem zweiten,
vermutlich älteren Lifebook funktioniert er dagegen überhaupt gar nicht. Selbstverständlich sind die Einstellungen in KNetworkManager absolut identisch.
Unter Windows dagegen funktioniert er in beiden Rechnern einwandfrei und ohne irgendwelche Einstellungen.
Ich habe dann mal den Script unter collectNWData gestartet, (http://www.linux-tips-and-tricks.de/...-Overview.html) das Ergebnis war eindeutig: CND0100E: keine Netzwerkkarte gefunden.
lspci liefert:
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:0a.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 02)
02:0a.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 02)
02:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
Also nichts von einem WLAN-Adapter !!!
hwinfo dagegen findet die Karte:
Code:
39: PCMCIA 01.0: 0282 WLAN controller
  [Created at pcmcia.84]
  Unique ID: G3X0.lG4e6KMEdl8
  Parent ID: pU3i.bjazqCnnQmE
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:0a.1/1.0
  SysFS BusID: 1.0
  Hardware Class: network
  Model: "Lucent WaveLAN/IEEE"
  Hotplug: CardBus
  Socket: 1
  Vendor: pcmcia 0x0156 "Lucent Technologies"
  Device: pcmcia 0x0002 "WaveLAN/IEEE"
  Driver: "orinoco_cs"
  Driver Modules: "orinoco_cs"
  Device File: eth1
  Features: WLAN
  HW Address: 00:60:1d:1e:6e:53
  Link detected: no
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
  WLAN encryption modes: WEP40 WEP104 TKIP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pcmcia:m0156c0002f06fn00pfn00pa23EB9949pbC562E72ApcD27DEB1Apd00000000"
  Driver Info #0:
    Driver Status: hostap_cs is not active
    Driver Activation Cmd: "modprobe hostap_cs"
  Driver Info #1:
    Driver Status: orinoco_cs is active
    Driver Activation Cmd: "modprobe orinoco_cs"
  Extra Info: Lucent Technologies, WaveLAN/IEEE, Version 01.01
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #24 (CardBus bridge)
Das liest sich doch ganz ok, oder ?

auch dmesg liefert ein positives Ergebnis:
Code:
[ 6866.664969] pcmcia_socket pcmcia_socket1: pccard: card ejected from slot 1
[ 6866.665397] hermes @ 00013100: Card removed while issuing command 0x0002.
[ 6866.665405] eth1: Error -19 disabling MAC port
[ 6869.016166] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
[ 6869.017322] pcmcia 1.0: pcmcia: registering new device pcmcia1.0
[ 6869.092583] orinoco_cs 1.0: Hardware identity 0001:0001:0004:0000
[ 6869.092704] orinoco_cs 1.0: Station identity  001f:0001:0004:0034
[ 6869.092713] orinoco_cs 1.0: Firmware determined as Lucent/Agere 4.52
[ 6869.092722] orinoco_cs 1.0: firmware: requesting agere_sta_fw.bin
[ 6869.305859] orinoco_cs 1.0: Hardware identity 0001:0001:0004:0000
[ 6869.305994] orinoco_cs 1.0: Station identity  001f:0002:0009:0030
[ 6869.306004] orinoco_cs 1.0: Firmware determined as Lucent/Agere 9.48
[ 6869.306012] orinoco_cs 1.0: Ad-hoc demo mode supported
[ 6869.306018] orinoco_cs 1.0: IEEE standard IBSS ad-hoc mode supported
[ 6869.306025] orinoco_cs 1.0: WEP supported, 104-bit key
[ 6869.306031] orinoco_cs 1.0: WPA-PSK supported
[ 6869.454265] ADDRCONF(NETDEV_UP): eth1: link is not ready
Das Ergebnis ist aber, dass KNetworkManager der Karte keine IP-Adresse zuweist und damit auch keine Internet-Kommunikation möglich ist.

Ich begreife die Zusammenhänge nicht, wo ist denn eigentlich das genaue Problem ?

Kann mir jemand zum Einen den Zusammenhang erkären und einen Tipp geben, wie ich diese Karte auch auf diesr MAschine ans Netz bekomme.

Vielen Dank schon mal.
Axel