Hallo,
mein Samsung SCX4100 Multifunktionsdrucker/Scanner wird über USB nicht richtig erkannt.
Drucken geht über lp0 ganz normal, über USB ist Funktstille (kann ich tolerieren), aber ich kann nicht scannen. Unter Suse 10.2 (64-Bit) hatte es noch funktioniert, nun bin ich auf Suse 10.3 (32 Bit) umgestiegen (Neuinstallation) bekomme ich den Scanner nicht mehr hin.
also das System gibt folgende Infos:
Code:
torvalds:/etc/udev/rules.d # /usr/bin/lsusb
Bus 005 Device 003: ID 413c:2002 Dell Computer Corp. SK-8125 Keyboard
Bus 005 Device 002: ID 413c:1002 Dell Computer Corp. Keyboard Hub
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 006: ID 04e8:3413 Samsung Electronics Co., Ltd
Bus 002 Device 003: ID 058f:9360 Alcor Micro Corp.
Bus 002 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Also ist der Scanner/Drucker erkannt, aber für die weiteren Schritte zum Scanner reicht es nicht ...
Code:
torvalds:/etc/udev/rules.d # scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
und
Code:
torvalds:/etc/udev/rules.d # sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
in der /etc/sane.d/dll.conf ist der Scanner eingetragen ("smfp")
die smfp.conf ist eigenartigerweise eine XML-Datei (siehe Anhang)
In der /etc/udev/rules.d/55-libsane.rules ist auch der Eintrag
Code:
# Samsung SCX-4100
SYSFS{idVendor}=="04e8", SYSFS{idProduct}=="3413", MODE="0664", GROUP="lp", ENV{libsane_matched}="yes"
vorhanden.
Danke und viele Grüße
Lesezeichen