Anzeige:
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 15 von 21

Thema: Virtualbox Guest Additions in Suse 10.3-Gast?

  1. #1
    Registrierter Benutzer
    Registriert seit
    Mar 2005
    Beiträge
    1.378

    Virtualbox Guest Additions in Suse 10.3-Gast?

    Hallo zusammen,

    ich habe gerade einen Suse 10.3-Gast unter Virtualbox 1.5.2 installiert. Davor habe ich das Gleiche mit Debian Etch 4.0 und Ubuntu 7.10 gemacht. In beiden Fällen ließen sich die Guest Additions relativ problemlos laden.

    Unter Suse habe ich die Kernel-Header-Files installiert und dann den Installer für die Additions gestartet. Der lief fehlerfrei durch und warf nur die Standardmeldungen "building GuestAdditons kernel module..."
    Beendet wurde mit ... successfully installed. You have to reboot the system...

    Wenn ich allerdings reboote, dann bleibt z.B. die Maus immernoch im Gast gefangen und auch die Auflösungen stehen nicht zur Verfügung.

    Gibt es da noch ein Problem? Ich habe zumindest in den Gast-Logs (warn, messages, boot.msg...) nix gravierendes gefunden...

    Danke und Gruß,
    Martin
    Server: i5-4430, 32GB, openSUSE Leap 15.2
    Workstation: i9-9900, 64GB, openSUSE Tumbleweed

  2. #2
    Moderator
    Registriert seit
    Jul 2002
    Ort
    Darmstadt
    Beiträge
    1.943
    Ist das jeweilige Kernel-Modul denn geladen?
    Das kannst du mit lsmod nachschauen.

  3. #3
    Registrierter Benutzer
    Registriert seit
    Mar 2005
    Beiträge
    1.378
    Hallo psy,

    ja, ein lsmod | grep box wirft mir sowohl vboxvfs als auch vboxadd als geladene Module...

    Gruß,
    Martin

    P.S.: Beim runterfahren des Gasts hat er sich gerade beim Stoppen des vboxadd mit failed beschwert: Module is in use... falls das jemandem weiterhilft.
    Geändert von smartysmart34 (31.10.07 um 08:22 Uhr)
    Server: i5-4430, 32GB, openSUSE Leap 15.2
    Workstation: i9-9900, 64GB, openSUSE Tumbleweed

  4. #4
    Registrierter Benutzer Avatar von fuffy
    Registriert seit
    Jun 2002
    Ort
    Hückelhoven
    Beiträge
    3.026
    Hi!

    Welcher Maustreiber ist denn in /etc/X11/xorg.conf eingetragen? Es sollte vboxmouse sein.

    Gruß
    fuffy
    Shuttle SN95G5V2 | Athlon 64 3000+ | 1 GiB RAM | SAMSUNG HD501LJ | LG GSA-4167B | SkyStar 2
    Vaio VGN-SZ4XWN/C
    Linux 2.6 | GNOME 2.22 | VDR 1.6

  5. #5
    Rain_maker
    Gast
    Zitat Zitat von smartysmart34 Beitrag anzeigen
    P.S.: Beim runterfahren des Gasts hat er sich gerade beim Stoppen des vboxadd mit failed beschwert: Module is in use... falls das jemandem weiterhilft.
    Nope das habe ich auch, wenn ich vorher den Shared Folder nicht umounte.

    Ist ärgerlich aber nicht ursächlich für Dein Problem, sondern (Vermutung) einfach nur etwas schlechtes Timing, weil das Modul entladen werden soll, bevor der shared Folder ausgehängt wurde.

    Macht bei mir bis auf die beiden unschönen Fehlermeldungen aber auch keine Probleme.

    Greetz,

    RM

  6. #6
    Registrierter Benutzer
    Registriert seit
    Mar 2005
    Beiträge
    1.378
    Hallo zusammen,

    kurze Frage nochmal: Ich habe jetzt die virtuelle Suse 10.3 in den Runlevel 3 gebootet und dort sax2 gestartet. Meine naive ANnahme war, daß ich dann dort sowohl die entsprechende Grafikkarte als auch die Maus auswählen kann... Fehlannahme.

    Muß ich ernsthaft die xorg.conf manuell konfigurieren? Kann doch nicht wahr sein, oder?

    Passenderweise finde ich in sax2 nicht nur die Maus nicht, sondern er schluckt auch die 1280er Auflösung nicht. Welchen Grafiktreiber muß ich denn dann manuelle eintragen um höhere Auflösungen einstellen zu können?

    Danke und Gruß,
    Martin

    P.S.: Ich wäre dran interessiert zu erfahren, wieso das alles halbwegs problemlos unter Debian und Ubuntu klappt, während Suse zwar die Module läd, aber weiter nix damit macht?

    P.P.S.: Mal was zum raten: Grade editiere ich die xorg.conf. Was steht als InputDevice dirn? Driver "vboxmouse".

    Wieso zum Henker gibt er die dann nicht frei???

    Auszug:
    Liefere ich nach. Bin grade in Runlevel 3 und kann nicht kopieren...

    P.P.P.S: Ich habe mir gedacht.. mensch, biste schlau und schreibst die entscheidenden Passagen aus dem funktionierenden Debian Etch ab. Gedacht, getan. danach in Runlevel 5 gewechselt und siehe da: Auflösung geht und Maus-Integration geht auch. Zum test das System nochmal durch Null gefahren: Er kommt mit der richtigen Auflösung hoch, aber die Maus ist wieder gefangen. Was soll der Mist? Wieso zickt Suse in Virtualbox so rum?
    Geändert von smartysmart34 (31.10.07 um 21:39 Uhr)
    Server: i5-4430, 32GB, openSUSE Leap 15.2
    Workstation: i9-9900, 64GB, openSUSE Tumbleweed

  7. #7
    Mod. FAQ/Howto/Emulation
    Registriert seit
    Sep 2000
    Beiträge
    17.397
    Poste doch mal deine geändert xorg.conf. Ich vergleich das mal mit ner Fedora Installation in VB.

  8. #8
    Registrierter Benutzer
    Registriert seit
    Mar 2005
    Beiträge
    1.378

    xorg.conf und boot.msg

    Code:
    # /.../
    # SaX generated X11 config file
    # Created on: 2007-10-30T22:45:38+0100.
    #
    # Version: 8.1
    # Contact: Marcus Schaefer <sax@suse.de>, 2005
    # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
    #
    # Automatically generated by [ISaX] (8.1)
    # PLEASE DO NOT EDIT THIS FILE!
    #
    
    Section "Files"
      FontPath     "/usr/share/fonts/misc:unscaled"
      FontPath     "/usr/share/fonts/local"
      FontPath     "/usr/share/fonts/75dpi:unscaled"
      FontPath     "/usr/share/fonts/100dpi:unscaled"
      FontPath     "/usr/share/fonts/Type1"
      FontPath     "/usr/share/fonts/URW"
      FontPath     "/usr/share/fonts/Speedo"
      FontPath     "/usr/share/fonts/PEX"
      FontPath     "/usr/share/fonts/cyrillic"
      FontPath     "/usr/share/fonts/latin2/misc:unscaled"
      FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/Type1"
      FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
      FontPath     "/usr/share/fonts/baekmuk:unscaled"
      FontPath     "/usr/share/fonts/japanese:unscaled"
      FontPath     "/usr/share/fonts/kwintv"
      FontPath     "/usr/share/fonts/truetype"
      FontPath     "/usr/share/fonts/uni:unscaled"
      FontPath     "/usr/share/fonts/CID"
      FontPath     "/usr/share/fonts/ucs/misc:unscaled"
      FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
      FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/misc:unscaled"
      FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/Type1"
      FontPath     "/usr/share/fonts/misc/sgi:unscaled"
      FontPath     "/usr/share/fonts/xtest"
      FontPath     "/opt/kde3/share/fonts"
      InputDevices "/dev/gpmdata"
      InputDevices "/dev/input/mice"
    EndSection
    
    Section "ServerFlags"
      Option       "AllowMouseOpenFail" "on"
    EndSection
    
    Section "Module"
      Load         "dbe"
      Load         "type1"
      Load         "freetype"
      Load         "extmod"
      Load         "glx"
    EndSection
    
    Section "InputDevice"
      Driver       "kbd"
      Identifier   "Keyboard[0]"
      Option       "Protocol" "Standard"
      Option       "XkbLayout" "de"
      Option       "XkbModel" "microsoftpro"
      Option       "XkbRules" "xfree86"
      Option       "XkbVariant" "nodeadkeys"
    EndSection
    
    
    Section "InputDevice"
        Driver      "vboxmouse"
      Identifier   "Mouse[1]"
      Option       "CorePointer"
      Option       "Device" "/dev/input/mice"
      Option       "Protocol" "ImPS/2"
      Option       "Emulate3Buttons" "true"
    EndSection
    
    
    Section "Monitor"
      HorizSync    28-57
      Identifier   "Monitor[0]"
      Option       "DPMS"
      VertRefresh  43-60
    EndSection
    
    
    
    Section "Screen"
      SubSection "Display"
        Modes      "1152x864" "1024x768" "800x600" 
      EndSubSection
      Device       "Device[0]"
      Identifier   "Screen[0]"
      Monitor      "Monitor[0]"
    EndSection
    
    
    Section "Device"
        Driver      "vboxvideo"
      Identifier   "Device[0]"
    EndSection
    Auszug aus boot.msg mit Bezug zu vbox:
    Code:
    <6>vboxadd: initializing version 0.5
    <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    <7>PCI: setting IRQ 10 as level-triggered
    <6>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
    <6>vboxadd: major code: 254, using irq 10, io port 0xc040, memory at 0xf0400000 (size 4194304 bytes), hypervisor window at 0xf1580000 (size 0xc00000 bytes)
    <6>pcnet32.c:v1.33-NAPI 27.Jun.2006 tsbogend@alpha.franken.de
    <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    <7>PCI: setting IRQ 11 as level-triggered
    <6>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    <7>PCI: Setting latency timer of device 0000:00:03.0 to 64
    Server: i5-4430, 32GB, openSUSE Leap 15.2
    Workstation: i9-9900, 64GB, openSUSE Tumbleweed

  9. #9
    Mod. FAQ/Howto/Emulation
    Registriert seit
    Sep 2000
    Beiträge
    17.397
    Bei mir sieht der Mausbereich im Fedora Gast so aus:

    Code:
    Section "InputDevice"
      Identifier "VBoxMouse"
      Driver "vboxmouse"
      Option "CorePointer"
    EndSection
    Versuchs mal, ob es hilft? Keine Ahnung. Im Fedora Gast geht das so jedenfalls.

  10. #10
    Registrierter Benutzer
    Registriert seit
    Mar 2005
    Beiträge
    1.378
    Hallo Stefan,

    das Witzige ist ja, daß die o.g. Mausdefinition unter Debian in vbox klasse tut. Und nachdem ich das in Runlevel 3 so wie oben beschrieben unter Opsensuse 10.3 gespeichert habe, ging es mit einem Absetzen von "init 5" auch unter Suse.

    Nur nach einem Reboot ist wieder alles beim Alten ohne Mausintegration. Deshalb verzweifel ich ja grad.. :-(
    Server: i5-4430, 32GB, openSUSE Leap 15.2
    Workstation: i9-9900, 64GB, openSUSE Tumbleweed

  11. #11
    Mod. FAQ/Howto/Emulation
    Registriert seit
    Sep 2000
    Beiträge
    17.397
    Mal sehen, wenn ich am Wochenende etwas Zeit habe, will ich mal ne Suse aufsetzen als Gast. Die ct DVD liegt hier noch rum, da kann ich das mal testen.

  12. #12
    Registrierter Benutzer
    Registriert seit
    Mar 2005
    Beiträge
    1.378
    Hallo,

    ich hab' s jetzt auch nochmal so eingetragen, wie es bei Dir der Fall ist (den Identifyer habe ich natürlich so übernommen, wie er in meiner xorg.conf zum Zusammenbau des Desktops benötigt wird...). Tut aber auch nicht :-(
    Server: i5-4430, 32GB, openSUSE Leap 15.2
    Workstation: i9-9900, 64GB, openSUSE Tumbleweed

  13. #13
    Mod. FAQ/Howto/Emulation
    Registriert seit
    Sep 2000
    Beiträge
    17.397
    So, hier mal eine Suse 10.3 / VB Gast xorg.conf. 1280x1024, Maus übergangslos geht beides.

    Code:
    # /.../
    # SaX generated X11 config file
    # Created on: 2007-11-03T20:00:23+0100.
    #
    # Version: 8.1
    # Contact: Marcus Schaefer <sax@suse.de>, 2005
    # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
    #
    # Automatically generated by [ISaX] (8.1)
    # PLEASE DO NOT EDIT THIS FILE!
    #
    
    Section "Files"
      FontPath     "/usr/share/fonts/misc:unscaled"
      FontPath     "/usr/share/fonts/local"
      FontPath     "/usr/share/fonts/75dpi:unscaled"
      FontPath     "/usr/share/fonts/100dpi:unscaled"
      FontPath     "/usr/share/fonts/Type1"
      FontPath     "/usr/share/fonts/URW"
      FontPath     "/usr/share/fonts/Speedo"
      FontPath     "/usr/share/fonts/PEX"
      FontPath     "/usr/share/fonts/cyrillic"
      FontPath     "/usr/share/fonts/latin2/misc:unscaled"
      FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/Type1"
      FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
      FontPath     "/usr/share/fonts/baekmuk:unscaled"
      FontPath     "/usr/share/fonts/japanese:unscaled"
      FontPath     "/usr/share/fonts/kwintv"
      FontPath     "/usr/share/fonts/truetype"
      FontPath     "/usr/share/fonts/uni:unscaled"
      FontPath     "/usr/share/fonts/CID"
      FontPath     "/usr/share/fonts/ucs/misc:unscaled"
      FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
      FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/misc:unscaled"
      FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/Type1"
      FontPath     "/usr/share/fonts/misc/sgi:unscaled"
      FontPath     "/usr/share/fonts/xtest"
      FontPath     "/opt/kde3/share/fonts"
      InputDevices "/dev/gpmdata"
      InputDevices "/dev/input/mice"
    EndSection
    
    Section "ServerFlags"
      Option       "AllowMouseOpenFail" "on"
    EndSection
    
    Section "Module"
      Load         "glx"
      Load         "type1"
      Load         "extmod"
      Load         "dbe"
      Load         "freetype"
    EndSection
    
    Section "InputDevice"
      Driver       "kbd"
      Identifier   "Keyboard[0]"
      Option       "Protocol" "Standard"
      Option       "XkbLayout" "de"
      Option       "XkbModel" "microsoftpro"
      Option       "XkbRules" "xfree86"
      Option       "XkbVariant" "nodeadkeys"
    EndSection
    
    
    Section "InputDevice"
      Driver       "vboxmouse"
      Identifier   "Mouse[1]"
      Option       "Buttons" "9"
      Option       "Device" "/dev/input/mice"
      Option       "Name" "ImExPS/2 Generic Explorer Mouse"
      Option       "Protocol" "explorerps/2"
      Option       "Vendor" "Sysp"
      Option       "ZAxisMapping" "4 5"
    EndSection
    
    
    Section "Monitor"
      Option       "CalcAlgorithm" "XServerPool"
      DisplaySize  305 230
      HorizSync    31-64
      Identifier   "Monitor[0]"
      ModelName    "1280X1024@60HZ"
      VendorName   "--> VESA"
      VertRefresh  50-60
      UseModes     "Modes[0]"
    EndSection
    
    
    Section "Modes"
      Identifier   "Modes[0]"
    EndSection
    
    
    Section "Screen"
      DefaultDepth 24
      SubSection "Display"
        Depth      15
        Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      SubSection "Display"
        Depth      16
        Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      SubSection "Display"
        Depth      24
        Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      SubSection "Display"
        Depth      8
        Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      Device       "Device[0]"
      Identifier   "Screen[0]"
      Monitor      "Monitor[0]"
    EndSection
    
    
    Section "Device"
      BoardName    "Framebuffer Graphics"
      Driver       "vboxvideo"
      Identifier   "Device[0]"
      Screen       0
      VendorName   "VESA"
    EndSection
    
    
    
    Section "ServerLayout"
      Identifier   "Layout[all]"
      InputDevice  "Keyboard[0]" "CoreKeyboard"
      InputDevice  "Mouse[1]" "CorePointer"
      Option       "Clone" "off"
      Option       "Xinerama" "off"
      Screen       "Screen[0]"
    EndSection
    
    
    Section "DRI"
        Group      "video"
        Mode       0660
    EndSection
    
    Section "Extensions"
    EndSection
    Geändert von stefan.becker (03.11.07 um 20:18 Uhr)

  14. #14
    Registrierter Benutzer
    Registriert seit
    Mar 2005
    Beiträge
    1.378
    Hallo nochmal.

    Also jetzt langsam verläßt mich mein Latein...
    Ich dachte schon es liegt an der Bootmeldung zu Major code: 254....
    Sieht aber unter Debian bis auf's Byte genauso aus und dort läuft's.
    Ich glaube nicht, daß es an der xorg.conf liegt. Die Auflösung tut ja. Es wird nur die Maus nicht freigegeben.... Hat sonst noch jemand das Problem oder eine Lösung???

    Gruß,
    Martin
    Server: i5-4430, 32GB, openSUSE Leap 15.2
    Workstation: i9-9900, 64GB, openSUSE Tumbleweed

  15. #15
    Mod. FAQ/Howto/Emulation
    Registriert seit
    Sep 2000
    Beiträge
    17.397
    Sorry, ich habe so keine Idee.

    Ich habe Fedora 7 und Suse 10.3 Gäste neu installiert. Sowohl Maus als Grafik als auch Shared Folder gehen jeweils einwandfrei.

Ähnliche Themen

  1. RTL8187L mit Suse 10.3
    Von heppy im Forum Anbindung an die Aussenwelt
    Antworten: 17
    Letzter Beitrag: 19.03.08, 22:53
  2. Suse 10.3 Soundkarte funktioniert - aber still
    Von scheichlinux im Forum Musik
    Antworten: 8
    Letzter Beitrag: 20.12.07, 02:25
  3. PROBLEM: HylaFax & Suse 10.3
    Von nepomuk im Forum Linux als Server
    Antworten: 0
    Letzter Beitrag: 13.10.07, 21:42
  4. Antworten: 8
    Letzter Beitrag: 13.02.06, 09:50
  5. Antworten: 25
    Letzter Beitrag: 30.10.04, 23:40

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •