Danke für den Tipp MiGo, aber man kann sich ja ab und zu mal verlesen, zudem es
auf meinem Bildschirm echt wie ein Bindestrich aussieht.
Folglich habe ich hier dann die Ausgabe von "/usr/sbin/hwinfo --netcard"
42: PCI 11.0: 0200 Ethernet controller
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_10de_373
Unique ID: rBUF._yp5q40TWoF
SysFS ID: /devices/pci0000:00/0000:00:11.0
SysFS BusID: 0000:00:11.0
Hardware Class: network
Model: "ASUSTeK MCP55 Ethernet"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0373 "MCP55 Ethernet"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0xcb84
Revision: 0xa2
Driver: "forcedeth"
Driver Modules: "forcedeth"
Device File: eth0
Memory Range: 0xefffa000-0xefffafff (rw,non-prefetchable)
I/O Ports: 0xec00-0xec07 (rw)
Memory Range: 0xefff9000-0xefff90ff (rw,non-prefetchable)
Memory Range: 0xefff8000-0xefff800f (rw,non-prefetchable)
IRQ: 82 (7369 events)
HW Address: 00:1a:92:53:60:ad
Link detected: no
Module Alias: "pci:v000010DEd00000373sv00001043sd0000CB84bc06sc8 0i00"
Driver Info #0:
Driver Status: forcedeth is active
Driver Activation Cmd: "modprobe forcedeth"
Config Status: cfg=no, avail=yes, need=no, active=unknown
43: PCI 12.0: 0200 Ethernet controller
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_10de_373_0
Unique ID: JNkJ._yp5q40TWoF
SysFS ID: /devices/pci0000:00/0000:00:12.0
SysFS BusID: 0000:00:12.0
Hardware Class: network
Model: "ASUSTeK MCP55 Ethernet"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0373 "MCP55 Ethernet"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0xcb84
Revision: 0xa2
Driver: "forcedeth"
Driver Modules: "forcedeth"
Device File: eth1
Memory Range: 0xefff7000-0xefff7fff (rw,non-prefetchable)
I/O Ports: 0xeb00-0xeb07 (rw)
Memory Range: 0xefff6000-0xefff60ff (rw,non-prefetchable)
Memory Range: 0xefff5000-0xefff500f (rw,non-prefetchable)
IRQ: 58 (no events)
HW Address: 00:1a:92:53:68:cb
Link detected: yes
Module Alias: "pci:v000010DEd00000373sv00001043sd0000CB84bc06sc8 0i00"
Driver Info #0:
Driver Status: forcedeth is active
Driver Activation Cmd: "modprobe forcedeth"
Config Status: cfg=no, avail=yes, need=no, active=unknown
MfG
Manowar334
Lesezeichen