Code:
usb 2-4: new high speed USB device using ehci_hcd and address 6
usb 2-4: new device found, idVendor=eb1a, idProduct=2881
usb 2-4: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-4: configuration #1 chosen from 1 choice
em28xx new video device (eb1a:2881): interface 0, class 255
em28xx: device is attached to a USB 2.0 bus
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
FAILED: 0xa0 0x10
em28xx #0: Your board has no eeprom inside it and thus can't
em28xx #0: be autodetected. Please pass card=<n> insmod option to
em28xx #0: workaround that. Redirect complaints to the vendor of
em28xx #0: the TV card. Generic type will be used.
em28xx #0: Best regards,
em28xx #0: -- tux
em28xx #0: em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
em28xx #0: card=0 -> Generic EM2800 video grabber
em28xx #0: card=1 -> Generic EM2820 video grabber
em28xx #0: card=2 -> Generic EM2821 video grabber
em28xx #0: card=3 -> Generic EM2870 video grabber
em28xx #0: card=4 -> Generic EM2881 video grabber
em28xx #0: card=5 -> Generic EM2860 video grabber
em28xx #0: card=6 -> Generic EM2861 video grabber
em28xx #0: card=7 -> Terratec Cinergy 250 USB
em28xx #0: card=8 -> Pinnacle PCTV USB 2 (LG PAL TAPC)
em28xx #0: card=9 -> Hauppauge WinTV USB 2
em28xx #0: card=10 -> MSI VOX USB 2.0
em28xx #0: card=11 -> Terratec Cinergy 200 USB
em28xx #0: card=12 -> Leadtek Winfast USB II
em28xx #0: card=13 -> Kworld USB2800
em28xx #0: card=14 -> Pinnacle Dazzle DVC 90
em28xx #0: card=15 -> Hauppauge WinTV HVR 900
em28xx #0: card=16 -> Terratec Hybrid XS
em28xx #0: card=17 -> Terratec Hybrid XS Secam
em28xx #0: card=18 -> Kworld PVR TV 2800 RF
em28xx #0: card=19 -> Terratec Prodigy XS
em28xx #0: card=20 -> Videology 20K14XUSB USB2.0
em28xx #0: card=21 -> Usbgear VD204v9
em28xx #0: card=22 -> Terratec Cinergy T XS
em28xx #0: card=23 -> Pinnacle PCTV DVB-T
em28xx #0: card=24 -> DNT DA2 Hybrid
em28xx #0: card=25 -> Pinnacle Hybrid Pro
em28xx #0: card=26 -> Hercules Smart TV USB 2.0
em28xx #0: card=27 -> Compro, VideoMate U3
em28xx #0: card=28 -> KWorld DVB-T 310U
em28xx #0: card=29 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0
em28xx #0: card=30 -> Terratec Cinergy T XS (MT2060)
em28xx #0: card=31 -> MSI DigiVox A/D
em28xx #0: card=32 -> D-Link DUB-T210 TV Tuner
em28xx #0: card=33 -> Gadmei UTV310
em28xx #0: card=34 -> Kworld 355 U DVB-T
em28xx #0: card=35 -> Supercomp USB 2.0 TV
em28xx #0: card=36 -> Hauppauge WinTV HVR Rev. 1.2
em28xx #0: card=37 -> Gadmei UTV330
em28xx #0: card=38 -> V-Gear PocketTV
em28xx #0: card=39 -> Kworld 350 U DVB-T
em28xx #0: card=40 -> Terratec Hybrid XS (em2882)
em28xx #0: card=41 -> Pinnacle Dazzle DVC 100
em28xx #0: card=42 -> Generic EM2750 video grabber
em28xx #0: card=43 -> Yakumo MovieMixer
em28xx #0: card=44 -> Huaqi DLCW-130
em28xx #0: card=45 -> Generic EM2883 video grabber
em28xx #0: card=46 -> Hauppauge WinTV HVR 950
em28xx #0: card=47 -> Pinnacle PCTV HD Pro
em28xx #0: card=48 -> Pinnacle Hybrid Pro (2)
em28xx #0: card=49 -> Hauppauge WinTV USB 2 (R2)
em28xx #0: card=50 -> NetGMBH Cam
em28xx #0: card=51 -> Leadtek Winfast USB II Deluxe
em28xx #0: card=52 -> MSI DigiVox A/D II
em28xx #0: card=53 -> Typhoon DVD Maker
em28xx #0: card=54 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
..... und so weiter, immer wieder error=-71 ......
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx #0: Found Generic EM2881 video grabber
em28xx audio device (eb1a:2881): interface 1, class 1
ALSA sound/usb/usbmixer.c:672: 2:1: cannot get min/max values for control 2 (id 2)
ALSA sound/usb/usbmixer.c:672: 2:1: cannot get min/max values for control 2 (id 2)
usb 2-4: USB disconnect, address 6
============> Stick ausgesteckt und wieder eingesteckt
usb 2-4: new high speed USB device using ehci_hcd and address 7
usb 2-4: new device found, idVendor=eb1a, idProduct=2881
usb 2-4: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-4: configuration #1 chosen from 1 choice
em28xx new video device (eb1a:2881): interface 0, class 255
em28xx: device is attached to a USB 2.0 bus
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
FAILED: 0xa0 0x10
em28xx #0: Your board has no eeprom inside it and thus can't
em28xx #0: be autodetected. Please pass card=<n> insmod option to
em28xx #0: workaround that. Redirect complaints to the vendor of
em28xx #0: the TV card. Generic type will be used.
em28xx #0: Best regards,
em28xx #0: -- tux
em28xx #0: em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
em28xx #0: card=0 -> Generic EM2800 video grabber
em28xx #0: card=1 -> Generic EM2820 video grabber
em28xx #0: card=2 -> Generic EM2821 video grabber
em28xx #0: card=3 -> Generic EM2870 video grabber
em28xx #0: card=4 -> Generic EM2881 video grabber
em28xx #0: card=5 -> Generic EM2860 video grabber
em28xx #0: card=6 -> Generic EM2861 video grabber
em28xx #0: card=7 -> Terratec Cinergy 250 USB
em28xx #0: card=8 -> Pinnacle PCTV USB 2 (LG PAL TAPC)
em28xx #0: card=9 -> Hauppauge WinTV USB 2
em28xx #0: card=10 -> MSI VOX USB 2.0
em28xx #0: card=11 -> Terratec Cinergy 200 USB
em28xx #0: card=12 -> Leadtek Winfast USB II
em28xx #0: card=13 -> Kworld USB2800
em28xx #0: card=14 -> Pinnacle Dazzle DVC 90
em28xx #0: card=15 -> Hauppauge WinTV HVR 900
em28xx #0: card=16 -> Terratec Hybrid XS
em28xx #0: card=17 -> Terratec Hybrid XS Secam
em28xx #0: card=18 -> Kworld PVR TV 2800 RF
em28xx #0: card=19 -> Terratec Prodigy XS
em28xx #0: card=20 -> Videology 20K14XUSB USB2.0
em28xx #0: card=21 -> Usbgear VD204v9
em28xx #0: card=22 -> Terratec Cinergy T XS
em28xx #0: card=23 -> Pinnacle PCTV DVB-T
em28xx #0: card=24 -> DNT DA2 Hybrid
em28xx #0: card=25 -> Pinnacle Hybrid Pro
em28xx #0: card=26 -> Hercules Smart TV USB 2.0
em28xx #0: card=27 -> Compro, VideoMate U3
em28xx #0: card=28 -> KWorld DVB-T 310U
em28xx #0: card=29 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0
em28xx #0: card=30 -> Terratec Cinergy T XS (MT2060)
em28xx #0: card=31 -> MSI DigiVox A/D
em28xx #0: card=32 -> D-Link DUB-T210 TV Tuner
em28xx #0: card=33 -> Gadmei UTV310
em28xx #0: card=34 -> Kworld 355 U DVB-T
em28xx #0: card=35 -> Supercomp USB 2.0 TV
em28xx #0: card=36 -> Hauppauge WinTV HVR Rev. 1.2
em28xx #0: card=37 -> Gadmei UTV330
em28xx #0: card=38 -> V-Gear PocketTV
em28xx #0: card=39 -> Kworld 350 U DVB-T
em28xx #0: card=40 -> Terratec Hybrid XS (em2882)
em28xx #0: card=41 -> Pinnacle Dazzle DVC 100
em28xx #0: card=42 -> Generic EM2750 video grabber
em28xx #0: card=43 -> Yakumo MovieMixer
em28xx #0: card=44 -> Huaqi DLCW-130
em28xx #0: card=45 -> Generic EM2883 video grabber
em28xx #0: card=46 -> Hauppauge WinTV HVR 950
em28xx #0: card=47 -> Pinnacle PCTV HD Pro
em28xx #0: card=48 -> Pinnacle Hybrid Pro (2)
em28xx #0: card=49 -> Hauppauge WinTV USB 2 (R2)
em28xx #0: card=50 -> NetGMBH Cam
em28xx #0: card=51 -> Leadtek Winfast USB II Deluxe
em28xx #0: card=52 -> MSI DigiVox A/D II
em28xx #0: card=53 -> Typhoon DVD Maker
em28xx #0: card=54 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
..... und so weiter, immer wieder error=-71 ......
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx #0: Found Generic EM2881 video grabber
em28xx audio device (eb1a:2881): interface 1, class 1
ALSA sound/usb/usbmixer.c:672: 2:1: cannot get min/max values for control 2 (id 2)
ALSA sound/usb/usbmixer.c:672: 2:1: cannot get min/max values for control 2 (id 2)
usb 2-4: USB disconnect, address 7
============> Stick ausgesteckt und wieder eingesteckt
usb 2-4: new high speed USB device using ehci_hcd and address 8
usb 2-4: new device found, idVendor=eb1a, idProduct=2881
usb 2-4: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-4: configuration #1 chosen from 1 choice
em28xx new video device (eb1a:2881): interface 0, class 255
em28xx: device is attached to a USB 2.0 bus
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
FAILED: 0xa0 0x10
em28xx #0: Your board has no eeprom inside it and thus can't
em28xx #0: be autodetected. Please pass card=<n> insmod option to
em28xx #0: workaround that. Redirect complaints to the vendor of
em28xx #0: the TV card. Generic type will be used.
em28xx #0: Best regards,
em28xx #0: -- tux
em28xx #0: em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
em28xx #0: card=0 -> Generic EM2800 video grabber
em28xx #0: card=1 -> Generic EM2820 video grabber
em28xx #0: card=2 -> Generic EM2821 video grabber
em28xx #0: card=3 -> Generic EM2870 video grabber
em28xx #0: card=4 -> Generic EM2881 video grabber
em28xx #0: card=5 -> Generic EM2860 video grabber
em28xx #0: card=6 -> Generic EM2861 video grabber
em28xx #0: card=7 -> Terratec Cinergy 250 USB
em28xx #0: card=8 -> Pinnacle PCTV USB 2 (LG PAL TAPC)
em28xx #0: card=9 -> Hauppauge WinTV USB 2
em28xx #0: card=10 -> MSI VOX USB 2.0
em28xx #0: card=11 -> Terratec Cinergy 200 USB
em28xx #0: card=12 -> Leadtek Winfast USB II
em28xx #0: card=13 -> Kworld USB2800
em28xx #0: card=14 -> Pinnacle Dazzle DVC 90
em28xx #0: card=15 -> Hauppauge WinTV HVR 900
em28xx #0: card=16 -> Terratec Hybrid XS
em28xx #0: card=17 -> Terratec Hybrid XS Secam
em28xx #0: card=18 -> Kworld PVR TV 2800 RF
em28xx #0: card=19 -> Terratec Prodigy XS
em28xx #0: card=20 -> Videology 20K14XUSB USB2.0
em28xx #0: card=21 -> Usbgear VD204v9
em28xx #0: card=22 -> Terratec Cinergy T XS
em28xx #0: card=23 -> Pinnacle PCTV DVB-T
em28xx #0: card=24 -> DNT DA2 Hybrid
em28xx #0: card=25 -> Pinnacle Hybrid Pro
em28xx #0: card=26 -> Hercules Smart TV USB 2.0
em28xx #0: card=27 -> Compro, VideoMate U3
em28xx #0: card=28 -> KWorld DVB-T 310U
em28xx #0: card=29 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0
em28xx #0: card=30 -> Terratec Cinergy T XS (MT2060)
em28xx #0: card=31 -> MSI DigiVox A/D
em28xx #0: card=32 -> D-Link DUB-T210 TV Tuner
em28xx #0: card=33 -> Gadmei UTV310
em28xx #0: card=34 -> Kworld 355 U DVB-T
em28xx #0: card=35 -> Supercomp USB 2.0 TV
em28xx #0: card=36 -> Hauppauge WinTV HVR Rev. 1.2
em28xx #0: card=37 -> Gadmei UTV330
em28xx #0: card=38 -> V-Gear PocketTV
em28xx #0: card=39 -> Kworld 350 U DVB-T
em28xx #0: card=40 -> Terratec Hybrid XS (em2882)
em28xx #0: card=41 -> Pinnacle Dazzle DVC 100
em28xx #0: card=42 -> Generic EM2750 video grabber
em28xx #0: card=43 -> Yakumo MovieMixer
em28xx #0: card=44 -> Huaqi DLCW-130
em28xx #0: card=45 -> Generic EM2883 video grabber
em28xx #0: card=46 -> Hauppauge WinTV HVR 950
em28xx #0: card=47 -> Pinnacle PCTV HD Pro
em28xx #0: card=48 -> Pinnacle Hybrid Pro (2)
em28xx #0: card=49 -> Hauppauge WinTV USB 2 (R2)
em28xx #0: card=50 -> NetGMBH Cam
em28xx #0: card=51 -> Leadtek Winfast USB II Deluxe
em28xx #0: card=52 -> MSI DigiVox A/D II
em28xx #0: card=53 -> Typhoon DVD Maker
em28xx #0: card=54 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
..... und so weiter, immer wieder error=-71 ......
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx #0: Found Generic EM2881 video grabber
em28xx audio device (eb1a:2881): interface 1, class 1
ALSA sound/usb/usbmixer.c:672: 2:1: cannot get min/max values for control 2 (id 2)
ALSA sound/usb/usbmixer.c:672: 2:1: cannot get min/max values for control 2 (id 2)
usb 2-4: USB disconnect, address 8
============> Stick ausgesteckt und wieder eingesteckt
usb 2-4: new high speed USB device using ehci_hcd and address 9
usb 2-4: new device found, idVendor=eb1a, idProduct=2881
usb 2-4: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-4: configuration #1 chosen from 1 choice
em28xx new video device (eb1a:2881): interface 0, class 255
em28xx: device is attached to a USB 2.0 bus
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
FAILED: 0xa0 0x10
em28xx #0: Your board has no eeprom inside it and thus can't
em28xx #0: be autodetected. Please pass card=<n> insmod option to
em28xx #0: workaround that. Redirect complaints to the vendor of
em28xx #0: the TV card. Generic type will be used.
em28xx #0: Best regards,
em28xx #0: -- tux
em28xx #0: em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
em28xx #0: card=0 -> Generic EM2800 video grabber
em28xx #0: card=1 -> Generic EM2820 video grabber
em28xx #0: card=2 -> Generic EM2821 video grabber
em28xx #0: card=3 -> Generic EM2870 video grabber
em28xx #0: card=4 -> Generic EM2881 video grabber
em28xx #0: card=5 -> Generic EM2860 video grabber
em28xx #0: card=6 -> Generic EM2861 video grabber
em28xx #0: card=7 -> Terratec Cinergy 250 USB
em28xx #0: card=8 -> Pinnacle PCTV USB 2 (LG PAL TAPC)
em28xx #0: card=9 -> Hauppauge WinTV USB 2
em28xx #0: card=10 -> MSI VOX USB 2.0
em28xx #0: card=11 -> Terratec Cinergy 200 USB
em28xx #0: card=12 -> Leadtek Winfast USB II
em28xx #0: card=13 -> Kworld USB2800
em28xx #0: card=14 -> Pinnacle Dazzle DVC 90
em28xx #0: card=15 -> Hauppauge WinTV HVR 900
em28xx #0: card=16 -> Terratec Hybrid XS
em28xx #0: card=17 -> Terratec Hybrid XS Secam
em28xx #0: card=18 -> Kworld PVR TV 2800 RF
em28xx #0: card=19 -> Terratec Prodigy XS
em28xx #0: card=20 -> Videology 20K14XUSB USB2.0
em28xx #0: card=21 -> Usbgear VD204v9
em28xx #0: card=22 -> Terratec Cinergy T XS
em28xx #0: card=23 -> Pinnacle PCTV DVB-T
em28xx #0: card=24 -> DNT DA2 Hybrid
em28xx #0: card=25 -> Pinnacle Hybrid Pro
em28xx #0: card=26 -> Hercules Smart TV USB 2.0
em28xx #0: card=27 -> Compro, VideoMate U3
em28xx #0: card=28 -> KWorld DVB-T 310U
em28xx #0: card=29 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0
em28xx #0: card=30 -> Terratec Cinergy T XS (MT2060)
em28xx #0: card=31 -> MSI DigiVox A/D
em28xx #0: card=32 -> D-Link DUB-T210 TV Tuner
em28xx #0: card=33 -> Gadmei UTV310
em28xx #0: card=34 -> Kworld 355 U DVB-T
em28xx #0: card=35 -> Supercomp USB 2.0 TV
em28xx #0: card=36 -> Hauppauge WinTV HVR Rev. 1.2
em28xx #0: card=37 -> Gadmei UTV330
em28xx #0: card=38 -> V-Gear PocketTV
em28xx #0: card=39 -> Kworld 350 U DVB-T
em28xx #0: card=40 -> Terratec Hybrid XS (em2882)
em28xx #0: card=41 -> Pinnacle Dazzle DVC 100
em28xx #0: card=42 -> Generic EM2750 video grabber
em28xx #0: card=43 -> Yakumo MovieMixer
em28xx #0: card=44 -> Huaqi DLCW-130
em28xx #0: card=45 -> Generic EM2883 video grabber
em28xx #0: card=46 -> Hauppauge WinTV HVR 950
em28xx #0: card=47 -> Pinnacle PCTV HD Pro
em28xx #0: card=48 -> Pinnacle Hybrid Pro (2)
em28xx #0: card=49 -> Hauppauge WinTV USB 2 (R2)
em28xx #0: card=50 -> NetGMBH Cam
em28xx #0: card=51 -> Leadtek Winfast USB II Deluxe
em28xx #0: card=52 -> MSI DigiVox A/D II
em28xx #0: card=53 -> Typhoon DVD Maker
em28xx #0: card=54 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-110)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
..... und so weiter, immer wieder error=-71 ......
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx #0: reading from i2c device failed (error=-71)
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx #0: Found Generic EM2881 video grabber
em28xx audio device (eb1a:2881): interface 1, class 1
ALSA sound/usb/usbmixer.c:672: 2:1: cannot get min/max values for control 2 (id 2)
ALSA sound/usb/usbmixer.c:672: 2:1: cannot get min/max values for control 2 (id 2)
usb 2-4: USB disconnect, address 9
Den Stick also wieder ausgesteckt und wieder eingesteckt, und plötzlich klappt alles wie gewünscht und ich kann den Stick benutzen. Die Meldung im dmesg sind genauso, wie sie sein sollten:
Code:
usb 2-4: new high speed USB device using ehci_hcd and address 10
usb 2-4: new device found, idVendor=eb1a, idProduct=2881
usb 2-4: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB 2881 Video
usb 2-4: configuration #1 chosen from 1 choice
em28xx new video device (eb1a:2881): interface 0, class 255
em28xx: device is attached to a USB 2.0 bus
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
Tuner: registering extension (Xceive 3028 Tuner)
input: em2880/em2870 remote control as /class/input/input4
em28xx-input.c: remote control handler attached
attach_inform: eeprom detected.
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= eb1a:2881
AC97 audio (5 sample rates)
USB Remote wakeup capable
500mA max power
Table at 0x04, strings=0x206a, 0x006a, 0x0000
tuner 1-0061: chip found @ 0xc2 (em28xx #0)
attach inform (default): detected I2C address c2
Tuner: setting up tuner core extension for: Xceive 3028 Tuner
Loading base firmware: xc3028_init0.i2c.fw
Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
attach_inform: tvp5150 detected.
tvp5150 1-005c: tvp5150am1 detected.
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx #0: Found Pinnacle Hybrid Pro
em28xx audio device (eb1a:2881): interface 1, class 1
Tuner: registering extension (MT2060 Silicon Tuner)
em2880-dvb.c: DVB Init
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading default dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: sending extra call for DVB-T
DVB: registering new adapter (em2880 DVB-T).
DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
Em28xx: Initialized (Em2880 DVB Extension) extension
Zwischen dem Ein- und Ausstecken habe ich nichts geändert was Module oder sonstige Einstellungen angeht. So ganz versteh ich die Fehlermeldung nicht:
Lesezeichen