Mal wieder. TV aufnehmen mit analoger Karte.

**Saedelaere** · 01.02.07, 13:10

Hi,

ich habe hier vor Monaten schon einmal einen Thread zu diesem Thema aufgemacht. Damals habe ich die Sache dann abgebrochen, da ich wichtigeres zu tun habe. Ab heute startet auf RTL 2 "Hör mal wer da hämmert". Da steh ich voll drauf und würde es gerne aufnehmen.
Aufnehmen könnte ich es natürlich unter Windows, was aber nicht mein Ziel ist.

Ich setze eine Wintv Express (BT878) auf Suse 10.2 ein.

Fernsehen schauen mit KDETV, XawTV, MoTV und tvtime ist alles kein Problem. Allerdings finde ich einfach keine Möglichkeit etwas aufzunehmen.

Folgendes habe ich versucht:

Xdtv habe ich installiert. Allerdings aus Ermangelung eines Suse 10.2 Paketes die RPM für 10.1. Lässt sich nicht starten.

Code:

saedelaere@linux-crow:~> xdtv
xdtv: error while loading shared libraries: libx264.so.47: cannot open shared object file: No such file or directory
saedelaere@linux-crow:~>

Bei meiner Suche bin ich auch über Kalva gestolpert. Hört sich auch alles Prima an.
Leider kann ich schon mal keinen eigenständigen Sendersuchlauf starten. Die Anzeige bleibt immer bei 0% stehen.
Ich habe dann meine Sender aus der .xawtv Datei geholt. Diese konnte ich mittels Motv anlegen. Der dort integrierte Sendersuchlauf funktioniert.
Leider werden nur die Sendernamen mit integriert. Habe dann bei einem Sender Kanal und Frequenz manuel hinzugefügt.
Es funktionieren danach aber weder Vorschau noch Aufnahme.

Code:

kalva: in slotPlay
kalva: try to read profile from /home/saedelaere/.kde/share/apps
/kalva/hwprofile//
kalva: try to read profile from /home/saedelaere/.kde/share/apps
/kalva/qprofile//
kalva: computing crop values
kalva: computing crop values
kalva: aspect_pal  = 1.77778
kalva: exactw  = 0
kalva: exacth  = 0
kalva: modw16  = 0
kalva: cropw  = 0
kalva: modh16  = 0
kalva: croph  = 0
kalva: overscanw  = 0
kalva: overscanh  = 0
kalva: aspect_capture  = nan
kalva: aspect_crop  = nan
kalva: aspect  = nan
kalva: driver =
kalva: in prepareAumix
kalva: audiodev =
kalva: in getAumixdev, audiodev =
kalva: stripped audiodev =
kalva: WARNING: device not known to aumix
kalva: aumixdev =
kalva: in setAumixPrePlay()
MPlayer 1.0rc1-SUSE Linux 10.2 (i686)-Packman-4.1.2 (C) 2000-200
6 MPlayer Team
CPU: Intel(R) Pentium(R) D  CPU 2.66GHz (Family: 15, Model: 4, S
tepping: 7)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Error: option 'tv' must have a parameter!
Error parsing option on the command line: -tv
kalva: In slotMplayerExited()

Für mich sieht es so aus, als ob an der Befehlszeile die Kalva ausführt etwas nicht stimmt. Nachdem aber auch die Scanfunktion im Programm nicht geht, kann es auch gut an der Hardware liegen.
Hier noch der Befehl, den Kalva versucht auszuführen.

Code:

/usr/bin/mplayer -bpp 32 -fs tv://  -tv driver=:norm=:device=:input=:quality=0:width=:height=:channel=S06 -vf rectangle=0:0:0:0,dsize=4/3 -vo xv

Noch versucht habe ich mythtv. Das hatte ich schon mal am laufen, allerings waren Ton und Video immer versetzt (schon bei der Wiedergabe). Hinzu kommt noch, dass das Programm viel zu viel kann. Das ist für mich mit meiner einfachen TV Karte nicht das passende.

Gv4l war auch schon auf der Platte. Damit habe ich auch schon was aufgenomen. Leider ohne Ton und in bemerkenswert schlechter Qualität.

Falls mir noch jemand einen Tip geben kann wäre ich echt dankbar.

Oh und Empfehlungen für eine teure Tv Karte sind nicht erwünscht. Habe nämlich momentan kein Geld

Hier noch die Ausgabe von dmesg

Code:

saedelaere@linux-crow:~> dmesg
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)
 BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)
 BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 261952
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 32576 pages, LIFO batch:7
DMI present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fa3e0
ACPI: RSDT (v001 A_M_I  OEMRSDT  0x12000620 MSFT 0x00000097) @ 0x3ff40000
ACPI: FADT (v002 A M I  OEMFACP  0x12000620 MSFT 0x00000097) @ 0x3ff40200
ACPI: MADT (v001 A_M_I  OEMAPIC  0x12000620 MSFT 0x00000097) @ 0x3ff40300
ACPI: OEMB (v001 A_M_I  OEMBIOS  0x12000620 MSFT 0x00000097) @ 0x3ff50040
ACPI: DSDT (v001  75i6G 75i6G286 0x00000286 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bed00000)
Detected 3319.576 MHz processor.
Built 1 zonelists.  Total pages: 261952
Kernel command line: root=/dev/hda9 vga=0x31a resume=/dev/hda8 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031560k/1047808k available (1697k kernel code, 15544k reserved, 968k data, 196k init, 130304k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6643.34 BogoMIPS (lpj=13286685)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000651d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 3188k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6638.97 BogoMIPS (lpj=13277943)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000651d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
Total of 2 processors activated (13282.31 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=411
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:08: ioport range 0x290-0x29f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: fa900000-fe9fffff
  PREFETCH window: cfe00000-efdfffff
PCI: Bridge: 0000:00:1e.0
  IO window: b000-bfff
  MEM window: fea00000-feafffff
  PREFETCH window: efe00000-efefffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1170335608.868:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 131072k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:d6d0
vesafb: pmi: set display start = c00cd706, set palette = c00cd770
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3).
Console: switching to colour frame buffer device 156x60
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x3
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x4
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: SAMSUNG SP2514N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
Probing IDE interface ide1...
hdc: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel_rng: FWH not detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0)
hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000e000
Linux agpgart interface v0.101 (c) Dave Jones
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000e400
hdd: ATAPI 48X<6>usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
 DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000e800
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 185, io base 0x0000ec00
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
hdc: CHECK for good STATUS
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 201, io mem 0xfebffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 2-1: device descriptor read/all, error -71
Linux video capture interface: v2.00
8139too Fast Ethernet driver 0.9.27
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 128M @ 0xf0000000
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 209
gameport: EMU10K1 is pci0000:02:01.1/gameport0, io 0xbc00, speed 1147kHz
ALSA sound/pci/emu10k1/emufx.c:1435: Installing spdif_bug patch: Audigy 2 ZS [SB0350]
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 209
eth0: RealTek RTL8139 at 0xf9692400, 00:13:8f:ce:27:ff, IRQ 209
eth0:  Identified 8139 chip type 'RTL-8101'
ACPI: PCI Interrupt 0000:02:01.2[B] -> GSI 23 (level, low) -> IRQ 201
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 185
NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9746  Fri Dec 15 09:54:45 PST 2006
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 23 (level, low) -> IRQ 201
bttv0: Bt878 (rev 17) at 0000:02:02.0, irq: 201, latency: 32, mmio: 0xefefe000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #0 [sw] passed test.
tveeprom 1-0050: Hauppauge model 44804, rev E1B3, serial# 9784053
tveeprom 1-0050: tuner model is TCL M2523_3DB_E (idx 113, type 55)
tveeprom 1-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
tveeprom 1-0050: audio processor is None (idx 0)
tveeprom 1-0050: decoder processor is BT878 (idx 14)
tveeprom 1-0050: has no radio, has no IR remote
bttv0: Hauppauge eeprom indicates model#44804
bttv0: using tuner=55
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
usb 5-3: new high speed USB device using ehci_hcd and address 2
tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 1-0061: type set to 55 (TCL 2002MB)
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:02.1[A] -> GSI 23 (level, low) -> IRQ 201
bt878_probe: card id=[0x13eb0070], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:02:02.1 disabled
bt878: probe of 0000:02:02.1 failed with error -22
usb 5-3: new device found, idVendor=04b4, idProduct=6560
usb 5-3: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-3: configuration #1 chosen from 1 choice
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 4 ports detected
Adding 2048248k swap on /dev/hda8.  Priority:-1 extents:1 across:2048248k
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c015113e9f5]
usb 3-1: new full speed USB device using uhci_hcd and address 2
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
usb 3-1: new device found, idVendor=05d8, idProduct=4003
usb 3-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: new device found, idVendor=03f0, idProduct=0904
usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: DeskJet 845C
usb 3-2: Manufacturer: Hewlett-Packard
usb 3-2: SerialNumber: CN18S1C0QFSX
usb 3-2: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using uhci_hcd and address 4
usb 2-2: new device found, idVendor=046d, idProduct=c50b
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Receiver
usb 2-2: Manufacturer: Logitech
usb 2-2: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver hiddev
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
loop: loaded (max 8 devices)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
AppArmor: AppArmor initialized
audit(1170335626.113:2): AppArmor initialized

ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8186 buckets, 65488 max) - 228 bytes per conntrack
lirc_dev: IR Remote Control driver registered, at major 61
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
powernow: This module only works with AMD K7 CPUs
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
audit(1170332037.953:3): audit_backlog_limit=256 old=64 by auid=4294967295
audit(1170332038.169:4): audit_pid=3644 old=0 by auid=4294967295
bootsplash: status on console 0 changed to on
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:13:8f:ce:27:ff:00:13:49:9f:0e:1d:08:00 SRC=192.168.1.1 DST=192.168.1.2 LEN=348 TOS=0x00 PREC=0x00 TTL=255 ID=37223 PROTO=UDP SPT=1900 DPT=1024 LEN=328
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
saedelaere@linux-crow:~>

Vlg

Saedelaere

**Saedelaere** · 01.02.07, 16:10

Also ich habe Fortschritte gemacht.

Ich habe mich nochmals an Kalva gesetzt. Jetzt habe ich es doch tatsächlich geschafft mittels der Optionen "Scan" meine Kanäle einzubinden. Entscheidend hierfür war, dass der Pfad für scantv unter Components nicht gestimmt hat.

Leider hänge ich jetzt noch an Mplayer. Irgend etwas stimmt nicht mit dem Befehl den Kalva an Mplayer überträgt. Also wo sind die Mplayer Experten, die mir da helfen können. Die Fehlermeldung steht im ersten Post.

Danke

Saedelaere

**Saedelaere** · 02.02.07, 12:28

So ich mach mal mit meiner Alleinunterhaltung weiter

Ich habe nun begriffen, was an den Befehlen alles nicht stimmt, die Kalva da produziert. Allerdings etwas strange, da ich die entsprechenden Optionen bearbeitet habe. Dennoch trägt er einfach keinen Treiber in der Befehlszeile ein.

Wie dem auch sei. Ich aheb erste Ergebnisse beim aufzeichnen. Allerdings habe ich wohl ein deftiges Tonproblem. Habe mal 2 kurze VideoFiles hochgeladen. Damit kann sich der geneigte Leser ein Bild verschaffen.

Video1
wurde mit diesem Befehl erstellt

Code:

/usr/bin/mencoder tv://  -tv driver=v4l2:norm=pal:device=/dev/video0:input=0:quality=100:width=768:height=576:channel=51 -ovc lavc -lavcopts vcodec=mpeg4 -oac pcm -vf pp=lb -endpos 01:00:00 -o "/home/annelie/untitled/ZDF_`/bin/date +%a_%d.%b.%G_%H%M%S`.avi"

mit folgendem Ergebnis:

Code:

 /usr/bin/mencoder tv://  -tv driver=v4l2:norm=pal:device=/dev/video0:input=0:quality=100:width=768:height=576:channel=51 -ovc lavc -lavcopts vcodec=mpeg4 -oac pcm -vf pp=lb -endpos 01:00:00 -o "/home/annelie/untitled/ZDF_`/bin/date +%a_%d.%b.%G_%H%M%S`.avi"
MEncoder 1.0rc1-SUSE Linux 10.2 (i686)-Packman-4.1.2 (C) 2000-2006 MPlayer Team
CPU: AMD Athlon(tm)  (Family: 6, Model: 8, Stepping: 1)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
success: format: 9  data: 0x0 - 0x0
TV file format detected.
Selected driver: v4l2
 name: Video 4 Linux 2 input
 author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
 comment: first try, more to come ;-)
Selected device: BT878 video (Hauppauge (bt878))
 Tuner cap:
 Tuner rxs: MONO
 Capabilites:  video capture  video overlay  VBI capture device  tuner  read/write  streaming
 supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
 inputs: 0 = Television; 1 = Composite1; 2 = S-Video; 3 = Composite3;
 Current input: 0
 Current format: YVU420
v4l2: current audio mode is : MONO
Selected channel: 51 (freq: 711.250)
[V] filefmt:9  fourcc:0x32315659  size:768x576  fps:25.00  ftime:=0.0400
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->88200)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
Opening video filter: [pp=lb]
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 768 x 576 (preferred colorspace: Planar YV12)
[PP] Using external postprocessing filter, max q = 6.
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (768x576 fourcc=34504d46 [FMP4])
Selected video codec: [rawyv12] vfm: raw (RAW YV12)
==========================================================================
Forcing audio preload to 0, max pts correction to 0.
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
Writing header...1f ( 0%)  0.00fps Trem:   0min   0mb  A-V:0.000 [0:0]
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.
Writing header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.
Pos:   5.6s    139f ( 0%) 22.62fps Trem:   0min   0mb  A-V:0.000 [1005:705]
Flushing video frames
Writing index...
Writing header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.

Video stream: 1005.881 kbit/s  (125735 B/s)  size: 699087 bytes  5.560 secs  139 frames

Audio stream:  705.600 kbit/s  (88200 B/s)  size: 529200 bytes  6.000 secs
v4l2: 152 frames successfully processed, 0 frames dropped.

Dabei kommt Video 1 heraus.

Mit diesem Befehl:

Code:

/usr/bin/mencoder tv://  -tv driver=v4l2:norm=pal:device=/dev/video0:input=0:quality=100:width=768:height=576:channel=51 -ovc lavc -lavcopts vcodec=mpeg4 -oac mp3lame -vf pp=lb -endpos 01:00:00 -o "/home/annelie/untitled/ZDF_`/bin/date +%a_%d.%b.%G_%H%M%S`.avi"

Der diese Ausgabe produziert

Code:

/usr/bin/mencoder tv://  -tv driver=v4l2:norm=pal:device=/dev/video0:input=0:quality=100:width=768:height=576:channel=51 -ovc lavc -lavcopts vcodec=mpeg4 -oac mp3lame -vf pp=lb -endpos 01:00:00 -o "/home/annelie/untitled/ZDF_`/bin/date +%a_%d.%b.%G_%H%M%S`.avi"
MEncoder 1.0rc1-SUSE Linux 10.2 (i686)-Packman-4.1.2 (C) 2000-2006 MPlayer Team
CPU: AMD Athlon(tm)  (Family: 6, Model: 8, Stepping: 1)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
success: format: 9  data: 0x0 - 0x0
TV file format detected.
Selected driver: v4l2
 name: Video 4 Linux 2 input
 author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
 comment: first try, more to come ;-)
Selected device: BT878 video (Hauppauge (bt878))
 Tuner cap:
 Tuner rxs: MONO
 Capabilites:  video capture  video overlay  VBI capture device  tuner  read/write  streaming
 supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
 inputs: 0 = Television; 1 = Composite1; 2 = S-Video; 3 = Composite3;
 Current input: 0
 Current format: YVU420
v4l2: current audio mode is : MONO
Selected channel: 51 (freq: 711.250)
[V] filefmt:9  fourcc:0x32315659  size:768x576  fps:25.00  ftime:=0.0400
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->88200)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
Opening video filter: [pp=lb]
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 768 x 576 (preferred colorspace: Planar YV12)
[PP] Using external postprocessing filter, max q = 6.
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (768x576 fourcc=34504d46 [FMP4])
Selected video codec: [rawyv12] vfm: raw (RAW YV12)
==========================================================================
MP3 audio selected.
Forcing audio preload to 0, max pts correction to 0.
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
Writing header...1f ( 0%)  0.00fps Trem:   0min   0mb  A-V:0.000 [0:0]
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.
Writing header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.
Pos:   1.6s     40f ( 0%) 22.12fps Trem:   0min   0mb  A-V:0.000 [1538:305]
1 duplicate frame(s)!
Pos:   6.0s    148f ( 0%) 23.96fps Trem:   0min   0mb  A-V:0.000 [1139:305]
Flushing video frames
Writing index...
Writing header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.

Video stream: 1139.897 kbit/s  (142487 B/s)  size: 849223 bytes  5.960 secs  148 frames

Audio stream:  305.909 kbit/s  (38238 B/s)  size: 226747 bytes  5.930 secs
v4l2: 153 frames successfully processed, 0 frames dropped.

Kommt Video 2 heraus.

Leider habe ich beiden Videos deftige Soundprobleme. Desweiteren sollte die Qualität der Videos noch verbessert werden.

Wer kann mir helfen meine Mencoder Zeile noch zu verbessern??

Saedelaere

**JRausi** · 30.05.07, 21:20

Hi,

haste Dein Problem schon gelöst? (Beitrag ist immerhin schon 4 Monate alt).

Die Videos gehen leider nicht mehr, sonst hätte ich mir'se mal angeschaut. Was für'ne CPU hast'n Du? AMD AthlonXP 2000+ ?

Wenn Du's mit xdtv doch nochmal versuchen willst:
ftp://ftp.gwdg.de/pub/linux/misc/sus.../suse102/RPMS/
Hier gibts immer aktuelle xdtv-Pakete.

Tschö
Rausi

**Saedelaere** · 31.05.07, 14:03

Hi,

danke für deine Antwort. Ich habe bisher immer vergebens nach Xdtv RPMs für Suse 10.2 gesucht. Gut zu wissen wo es die gibt.
Meine Probleme mit Kalva hab ich jetzt gut im Griff. Das mit dem Ton lag an dem Rechner meiner Freundin. Dort ist eine billige onboard Soundlösung drauf. Liegt wohl an dem Chip, dass ich immer so ein Fiepen im Video hatte. Mit meiner Audigy 2 ZS gibt es keine Schwierigkeiten mehr und die Qualität hab ich auch in den Griff bekommen. Kalva ist OK und macht sehr gute Videos. Kann ich nur empfehlen.

Vlg

Saedelaere

**armer papa** · 06.05.08, 06:26

Ich habe auch Kalva installiert, auf 10.3. Funktioniert tadellos, bis auf die Aufnahme. Mencoder gibt Fehler zurück. Was kann ich da machen. Ich kriege das Ding nicht zum Laufen (ging schon mal kurz)