Anzeige:
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 15 von 18

Thema: cyrus und postfix

  1. #1
    Registrierter Benutzer
    Registriert seit
    Sep 2005
    Beiträge
    116

    cyrus und postfix

    servus!

    versuche gerade nach dieser anleitung hier n mailserver zu machen! http://www.heise.de/open/artikel/74991/1sieht bis jetz auch alles recht gut aus.... mails gehen raus und auch das mit dem filtern scheint zu klappen! (gab keine fehlermeldungen ^^)

    problem ist, dass die mails abgeholt, aber NICHT zum Imap-Server weitergeleitet werden! nachdem ich bei yast mal die mailzustellung von "cyrus imapserver"
    auf "direkt" gestellt hatte, hat er die mails alle ins verzeichnis /var/mail/user zugestellt.......

    wenn ich das jetz per hand machen will und nich mit yast, in welcher conf lege ich fest, dass postfix die mails an den IMAP server übergeben soll?

  2. #2
    Registrierter Benutzer
    Registriert seit
    Jul 2006
    Ort
    Hamburg
    Beiträge
    624
    Moin

    /etc/postfix/main.cf
    Code:
    local_transport = cyrus
    /etc/postfix/master.cf
    Code:
    cyrus     unix  -       n       n       -       -       pipe
      user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
    Anschließend werden alle lokalen Mails an Cyrus ausgeliefert.

  3. #3
    Registrierter Benutzer
    Registriert seit
    Sep 2005
    Beiträge
    116
    Code:
    Sep 17 01:20:03 linux postfix/postfix-script: starting the Postfix mail system
    Sep 17 01:20:03 linux postfix/master[7908]: daemon started -- version 2.2.9, configuration /etc/postfix
    Sep 17 01:20:03 linux postfix/qmgr[7910]: A530A222A1: from=<till@xxxxxxxxxx.de>, size=2165, nrcpt=1 (queue active)
    
    Sep 17 01:20:13 linux postfix/smtp[7912]: A530A222A1: to=<till@xxxxxxxx.de>, relay=none, delay=1957, status=deferred (connect to mx00.schlund.de[212.227.15.186]: server refused to talk to me: 421 mails from 84.xxx.86.64 refused: Dynamic IP Addresses See: http://www.sorbs.net/lookup.shtml?84.xxx.86.64  )

    sagt die log von postfix und es kommt auch nix an bei meinem outlook




    hier die main.cf
    local_transport = cyrus

    #
    # -----------------------------------------------------------------------
    # NOTE: Many parameters have already been added to the end of this file
    # by SuSEconfig.postfix. So take care that you don't uncomment
    # and set a parameter without checking whether it has been added
    # to the end of this file.
    # -----------------------------------------------------------------------
    #
    # Global Postfix configuration file. This file lists only a subset
    # of all 300+ parameters. See the postconf(5) manual page for a
    # complete list.
    #
    # The general format of each line is: parameter = value. Lines
    # that begin with whitespace continue the previous line. A value can
    # contain references to other $names or ${name}s.
    #
    # NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
    # POSTFIX STILL WORKS AFTER EVERY CHANGE.

    # SOFT BOUNCE
    #
    # The soft_bounce parameter provides a limited safety net for
    # testing. When soft_bounce is enabled, mail will remain queued that
    # would otherwise bounce. This parameter disables locally-generated
    # bounces, and prevents the SMTP server from rejecting mail permanently
    # (by changing 5xx replies into 4xx replies). However, soft_bounce
    # is no cure for address rewriting mistakes or mail routing mistakes.
    #
    #soft_bounce = no

    # LOCAL PATHNAME INFORMATION
    #
    # The queue_directory specifies the location of the Postfix queue.
    # This is also the root directory of Postfix daemons that run chrooted.
    # See the files in examples/chroot-setup for setting up Postfix chroot
    # environments on different UNIX systems.
    #
    queue_directory = /var/spool/postfix

    # The command_directory parameter specifies the location of all
    # postXXX commands.
    #
    command_directory = /usr/sbin

    # The daemon_directory parameter specifies the location of all Postfix
    # daemon programs (i.e. programs listed in the master.cf file). This
    # directory must be owned by root.
    #
    daemon_directory = /usr/lib/postfix

    # QUEUE AND PROCESS OWNERSHIP
    #
    # The mail_owner parameter specifies the owner of the Postfix queue
    # and of most Postfix daemon processes. Specify the name of a user
    # account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
    # AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
    # particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
    # USER.
    #
    mail_owner = postfix

    # The default_privs parameter specifies the default rights used by
    # the local delivery agent for delivery to external file or command.
    # These rights are used in the absence of a recipient user context.
    # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
    #
    #default_privs = nobody

    # INTERNET HOST AND DOMAIN NAMES
    #
    # The myhostname parameter specifies the internet hostname of this
    # mail system. The default is to use the fully-qualified domain name
    # from gethostname(). $myhostname is used as a default value for many
    # other configuration parameters.
    #
    myhostname = xxxxxxxxxxx.dyndns.org
    #myhostname = virtual.domain.tld

    # The mydomain parameter specifies the local internet domain name.
    # The default is to use $myhostname minus the first component.
    # $mydomain is used as a default value for many other configuration
    # parameters.
    #
    #mydomain = domain.tld

    # SENDING MAIL
    #
    # The myorigin parameter specifies the domain that locally-posted
    # mail appears to come from. The default is to append $myhostname,
    # which is fine for small sites. If you run a domain with multiple
    # machines, you should (1) change this to $mydomain and (2) set up
    # a domain-wide alias database that aliases each user to
    # user@that.users.mailhost.
    #
    # For the sake of consistency between sender and recipient addresses,
    # myorigin also specifies the default domain name that is appended
    # to recipient addresses that have no @domain part.
    #
    #myorigin = $myhostname
    #myorigin = $mydomain

    # RECEIVING MAIL

    # The inet_interfaces parameter specifies the network interface
    # addresses that this mail system receives mail on. By default,
    # the software claims all active interfaces on the machine. The
    # parameter also controls delivery of mail to user@[ip.address].
    #
    # See also the proxy_interfaces parameter, for network addresses that
    # are forwarded to us via a proxy or network address translator.
    #
    # Note: you need to stop/start Postfix when this parameter changes.
    #
    #inet_interfaces = all
    #inet_interfaces = $myhostname
    #inet_interfaces = $myhostname, localhost

    # The proxy_interfaces parameter specifies the network interface
    # addresses that this mail system receives mail on by way of a
    # proxy or network address translation unit. This setting extends
    # the address list specified with the inet_interfaces parameter.
    #
    # You must specify your proxy/NAT addresses when your system is a
    # backup MX host for other domains, otherwise mail delivery loops
    # will happen when the primary MX host is down.
    #
    #proxy_interfaces =
    #proxy_interfaces = 1.2.3.4

    # The mydestination parameter specifies the list of domains that this
    # machine considers itself the final destination for.
    #
    # These domains are routed to the delivery agent specified with the
    # local_transport parameter setting. By default, that is the UNIX
    # compatible delivery agent that lookups all recipients in /etc/passwd
    # and /etc/aliases or their equivalent.
    #
    # The default is $myhostname + localhost.$mydomain. On a mail domain
    # gateway, you should also include $mydomain.
    #
    # Do not specify the names of virtual domains - those domains are
    # specified elsewhere (see VIRTUAL_README).
    #
    # Do not specify the names of domains that this machine is backup MX
    # host for. Specify those names via the relay_domains settings for
    # the SMTP server, or use permit_mx_backup if you are lazy (see
    # STANDARD_CONFIGURATION_README).
    #
    # The local machine is always the final destination for mail addressed
    # to user@[the.net.work.address] of an interface that the mail system
    # receives mail on (see the inet_interfaces parameter).
    #
    # Specify a list of host or domain names, /file/name or type:table
    # patterns, separated by commas and/or whitespace. A /file/name
    # pattern is replaced by its contents; a type:table is matched when
    # a name matches a lookup key (the right-hand side is ignored).
    # Continue long lines by starting the next line with whitespace.
    #
    # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
    #
    #mydestination = $myhostname, localhost.$mydomain, localhost
    #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
    #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
    # mail.$mydomain, www.$mydomain, ftp.$mydomain

    # REJECTING MAIL FOR UNKNOWN LOCAL USERS
    #
    # The local_recipient_maps parameter specifies optional lookup tables
    # with all names or addresses of users that are local with respect
    # to $mydestination, $inet_interfaces or $proxy_interfaces.
    #
    # If this parameter is defined, then the SMTP server will reject
    # mail for unknown local users. This parameter is defined by default.
    #
    # To turn off local recipient checking in the SMTP server, specify
    # local_recipient_maps = (i.e. empty).
    #
    # The default setting assumes that you use the default Postfix local
    # delivery agent for local delivery. You need to update the
    # local_recipient_maps setting if:
    #
    # - You define $mydestination domain recipients in files other than
    # /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
    # For example, you define $mydestination domain recipients in
    # the $virtual_mailbox_maps files.
    #
    # - You redefine the local delivery agent in master.cf.
    #
    # - You redefine the "local_transport" setting in main.cf.
    #
    # - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
    # feature of the Postfix local delivery agent (see local(8)).
    #
    # Details are described in the LOCAL_RECIPIENT_README file.
    #
    # Beware: if the Postfix SMTP server runs chrooted, you probably have
    # to access the passwd file via the proxymap service, in order to
    # overcome chroot restrictions. The alternative, having a copy of
    # the system passwd file in the chroot jail is just not practical.
    #
    # The right-hand side of the lookup tables is conveniently ignored.
    # In the left-hand side, specify a bare username, an @domain.tld
    # wild-card, or specify a user@domain.tld address.
    #
    #local_recipient_maps = unixasswd.byname $alias_maps
    #local_recipient_maps = proxy:unixasswd.byname $alias_maps
    #local_recipient_maps =

    # The unknown_local_recipient_reject_code specifies the SMTP server
    # response code when a recipient domain matches $mydestination or
    # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
    # and the recipient address or address local-part is not found.
    #
    # The default setting is 550 (reject mail) but it is safer to start
    # with 450 (try again later) until you are certain that your
    # local_recipient_maps settings are OK.
    #
    unknown_local_recipient_reject_code = 550

    # TRUST AND RELAY CONTROL

    # The mynetworks parameter specifies the list of "trusted" SMTP
    # clients that have more privileges than "strangers".
    #
    # In particular, "trusted" SMTP clients are allowed to relay mail
    # through Postfix. See the smtpd_recipient_restrictions parameter
    # in postconf(5).
    #
    # You can specify the list of "trusted" network addresses by hand
    # or you can let Postfix do it for you (which is the default).
    #
    # By default (mynetworks_style = subnet), Postfix "trusts" SMTP
    # clients in the same IP subnetworks as the local machine.
    # On Linux, this does works correctly only with interfaces specified
    # with the "ifconfig" command.
    #
    # Specify "mynetworks_style = class" when Postfix should "trust" SMTP
    # clients in the same IP class A/B/C networks as the local machine.
    # Don't do this with a dialup site - it would cause Postfix to "trust"
    # your entire provider's network. Instead, specify an explicit
    # mynetworks list by hand, as described below.
    #
    # Specify "mynetworks_style = host" when Postfix should "trust"
    # only the local machine.
    #
    #mynetworks_style = class
    #mynetworks_style = subnet
    #mynetworks_style = host

    # Alternatively, you can specify the mynetworks list by hand, in
    # which case Postfix ignores the mynetworks_style setting.
    #
    # Specify an explicit list of network/netmask patterns, where the
    # mask specifies the number of bits in the network part of a host
    # address.
    #
    # You can also specify the absolute pathname of a pattern file instead
    # of listing the patterns here. Specify type:table for table-based lookups
    # (the value on the table right-hand side is not used).
    #
    #mynetworks = 168.100.189.0/28, 127.0.0.0/8
    #mynetworks = $config_directory/mynetworks
    #mynetworks = hash:/etc/postfix/network_table

    # The relay_domains parameter restricts what destinations this system will
    # relay mail to. See the smtpd_recipient_restrictions description in
    # postconf(5) for detailed information.
    #
    # By default, Postfix relays mail
    # - from "trusted" clients (IP address matches $mynetworks) to any destination,
    # - from "untrusted" clients to destinations that match $relay_domains or
    # subdomains thereof, except addresses with sender-specified routing.
    # The default relay_domains value is $mydestination.
    #
    # In addition to the above, the Postfix SMTP server by default accepts mail
    # that Postfix is final destination for:
    # - destinations that match $inet_interfaces or $proxy_interfaces,
    # - destinations that match $mydestination
    # - destinations that match $virtual_alias_domains,
    # - destinations that match $virtual_mailbox_domains.
    # These destinations do not need to be listed in $relay_domains.
    #
    # Specify a list of hosts or domains, /file/name patterns or type:name
    # lookup tables, separated by commas and/or whitespace. Continue
    # long lines by starting the next line with whitespace. A file name
    # is replaced by its contents; a type:name table is matched when a
    # (parent) domain appears as lookup key.
    #
    # NOTE: Postfix will not automatically forward mail for domains that
    # list this system as their primary or backup MX host. See the
    # permit_mx_backup restriction description in postconf(5).
    #
    #relay_domains = $mydestination

    # INTERNET OR INTRANET

    # The relayhost parameter specifies the default host to send mail to
    # when no entry is matched in the optional transport(5) table. When
    # no relayhost is given, mail is routed directly to the destination.
    #
    # On an intranet, specify the organizational domain name. If your
    # internal DNS uses no MX records, specify the name of the intranet
    # gateway host instead.
    #
    # In the case of SMTP, specify a domain, host, hostort, [host]ort,
    # [address] or [address]ort; the form [host] turns off MX lookups.
    #
    # If you're connected via UUCP, see also the default_transport parameter.
    #
    #relayhost = $mydomain
    #relayhost = [gateway.my.domain]
    #relayhost = [mailserver.isp.tld]
    #relayhost = uucphost
    #relayhost = [an.ip.add.ress]

    # REJECTING UNKNOWN RELAY USERS
    #
    # The relay_recipient_maps parameter specifies optional lookup tables
    # with all addresses in the domains that match $relay_domains.
    #
    # If this parameter is defined, then the SMTP server will reject
    # mail for unknown relay users. This feature is off by default.
    #
    # The right-hand side of the lookup tables is conveniently ignored.
    # In the left-hand side, specify an @domain.tld wild-card, or specify
    # a user@domain.tld address.
    #
    #relay_recipient_maps = hash:/etc/postfix/relay_recipients

    # INPUT RATE CONTROL
    #
    # The in_flow_delay configuration parameter implements mail input
    # flow control. This feature is turned on by default, although it
    # still needs further development (it's disabled on SCO UNIX due
    # to an SCO bug).
    #
    # A Postfix process will pause for $in_flow_delay seconds before
    # accepting a new message, when the message arrival rate exceeds the
    # message delivery rate. With the default 100 SMTP server process
    # limit, this limits the mail inflow to 100 messages a second more
    # than the number of messages delivered per second.
    #
    # Specify 0 to disable the feature. Valid delays are 0..10.
    #
    #in_flow_delay = 1s

    # ADDRESS REWRITING
    #
    # The ADDRESS_REWRITING_README document gives information about
    # address masquerading or other forms of address rewriting including
    # username->Firstname.Lastname mapping.

    # ADDRESS REDIRECTION (VIRTUAL DOMAIN)
    #
    # The VIRTUAL_README document gives information about the many forms
    # of domain hosting that Postfix supports.

    # "USER HAS MOVED" BOUNCE MESSAGES
    #
    # See the discussion in the ADDRESS_REWRITING_README document.

    # TRANSPORT MAP
    #
    # See the discussion in the ADDRESS_REWRITING_README document.

    # ALIAS DATABASE
    #
    # The alias_maps parameter specifies the list of alias databases used
    # by the local delivery agent. The default list is system dependent.
    #
    # On systems with NIS, the default is to search the local alias
    # database, then the NIS alias database. See aliases(5) for syntax
    # details.
    #
    # If you change the alias database, run "postalias /etc/aliases" (or
    # wherever your system stores the mail alias file), or simply run
    # "newaliases" to build the necessary DBM or DB file.
    #
    # It will take a minute or so before changes become visible. Use
    # "postfix reload" to eliminate the delay.
    #
    #alias_maps = dbm:/etc/aliases
    #alias_maps = hash:/etc/aliases
    #alias_maps = hash:/etc/aliases, nis:mail.aliases
    #alias_maps = netinfo:/aliases

    # The alias_database parameter specifies the alias database(s) that
    # are built with "newaliases" or "sendmail -bi". This is a separate
    # configuration parameter, because alias_maps (see above) may specify
    # tables that are not necessarily all under control by Postfix.
    #
    #alias_database = dbm:/etc/aliases
    #alias_database = dbm:/etc/mail/aliases
    #alias_database = hash:/etc/aliases
    #alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

    # ADDRESS EXTENSIONS (e.g., user+foo)
    #
    # The recipient_delimiter parameter specifies the separator between
    # user names and address extensions (user+foo). See canonical(5),
    # local(8), relocated(5) and virtual(5) for the effects this has on
    # aliases, canonical, virtual, relocated and .forward file lookups.
    # Basically, the software tries user+foo and .forward+foo before
    # trying user and .forward.
    #
    #recipient_delimiter = +

    # DELIVERY TO MAILBOX
    #
    # The home_mailbox parameter specifies the optional pathname of a
    # mailbox file relative to a user's home directory. The default
    # mailbox file is /var/spool/mail/user or /var/mail/user. Specify
    # "Maildir/" for qmail-style delivery (the / is required).
    #
    #home_mailbox = Mailbox
    #home_mailbox = Maildir/

    # The mail_spool_directory parameter specifies the directory where
    # UNIX-style mailboxes are kept. The default setting depends on the
    # system type.
    #
    #mail_spool_directory = /var/mail
    #mail_spool_directory = /var/spool/mail

    # The mailbox_command parameter specifies the optional external
    # command to use instead of mailbox delivery. The command is run as
    # the recipient with proper HOME, SHELL and LOGNAME environment settings.
    # Exception: delivery for root is done as $default_user.
    #
    # Other environment variables of interest: USER (recipient username),
    # EXTENSION (address extension), DOMAIN (domain part of address),
    # and LOCAL (the address localpart).
    #
    # Unlike other Postfix configuration parameters, the mailbox_command
    # parameter is not subjected to $parameter substitutions. This is to
    # make it easier to specify shell syntax (see example below).
    #
    # Avoid shell meta characters because they will force Postfix to run
    # an expensive shell process. Procmail alone is expensive enough.
    #
    # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
    # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
    #
    #mailbox_command = /some/where/procmail
    #mailbox_command = /some/where/procmail -a "$EXTENSION"

    # The mailbox_transport specifies the optional transport in master.cf
    # to use after processing aliases and .forward files. This parameter
    # has precedence over the mailbox_command, fallback_transport and
    # luser_relay parameters.
    #
    # Specify a string of the form transport:nexthop, where transport is
    # the name of a mail delivery transport defined in master.cf. The
    # :nexthop part is optional. For more details see the sample transport
    # configuration file.
    #
    # NOTE: if you use this feature for accounts not in the UNIX password
    # file, then you must update the "local_recipient_maps" setting in
    # the main.cf file, otherwise the SMTP server will reject mail for
    # non-UNIX accounts with "User unknown in local recipient table".
    #
    #mailbox_transport = lmtp:unix:/file/name
    #mailbox_transport = cyrus

    # The fallback_transport specifies the optional transport in master.cf
    # to use for recipients that are not found in the UNIX passwd database.
    # This parameter has precedence over the luser_relay parameter.
    #
    # Specify a string of the form transport:nexthop, where transport is
    # the name of a mail delivery transport defined in master.cf. The
    # :nexthop part is optional. For more details see the sample transport
    # configuration file.
    #
    # NOTE: if you use this feature for accounts not in the UNIX password
    # file, then you must update the "local_recipient_maps" setting in
    # the main.cf file, otherwise the SMTP server will reject mail for
    # non-UNIX accounts with "User unknown in local recipient table".
    #
    #fallback_transport = lmtp:unix:/file/name
    #fallback_transport = cyrus
    #fallback_transport =

    # The luser_relay parameter specifies an optional destination address
    # for unknown recipients. By default, mail for unknown@$mydestination,
    # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
    # as undeliverable.
    #
    # The following expansions are done on luser_relay: $user (recipient
    # username), $shell (recipient shell), $home (recipient home directory),
    # $recipient (full recipient address), $extension (recipient address
    # extension), $domain (recipient domain), $local (entire recipient
    # localpart), $recipient_delimiter. Specify ${name?value} or
    # ${name:value} to expand value only when $name does (does not) exist.
    #
    # luser_relay works only for the default Postfix local delivery agent.
    #
    # NOTE: if you use this feature for accounts not in the UNIX password
    # file, then you must specify "local_recipient_maps =" (i.e. empty) in
    # the main.cf file, otherwise the SMTP server will reject mail for
    # non-UNIX accounts with "User unknown in local recipient table".
    #
    #luser_relay = $user@other.host
    #luser_relay = $local@other.host
    #luser_relay = admin+$local

    # JUNK MAIL CONTROLS
    #
    # The controls listed here are only a very small subset. The file
    # SMTPD_ACCESS_README provides an overview.

    # The header_checks parameter specifies an optional table with patterns
    # that each logical message header is matched against, including
    # headers that span multiple physical lines.
    #
    # By default, these patterns also apply to MIME headers and to the
    # headers of attached messages. With older Postfix versions, MIME and
    # attached message headers were treated as body text.
    #
    # For details, see "man header_checks".
    #
    #header_checks = regexp:/etc/postfix/header_checks

    # FAST ETRN SERVICE
    #
    # Postfix maintains per-destination logfiles with information about
    # deferred mail, so that mail can be flushed quickly with the SMTP
    # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
    # See the ETRN_README document for a detailed description.
    #
    # The fast_flush_domains parameter controls what destinations are
    # eligible for this service. By default, they are all domains that
    # this server is willing to relay mail to.
    #
    #fast_flush_domains = $relay_domains

    # SHOW SOFTWARE VERSION OR NOT
    #
    # The smtpd_banner parameter specifies the text that follows the 220
    # code in the SMTP server's greeting banner. Some people like to see
    # the mail version advertised. By default, Postfix shows no version.
    #
    # You MUST specify $myhostname at the start of the text. That is an
    # RFC requirement. Postfix itself does not care.
    #
    #smtpd_banner = $myhostname ESMTP $mail_name
    #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

    # PARALLEL DELIVERY TO THE SAME DESTINATION
    #
    # How many parallel deliveries to the same user or domain? With local
    # delivery, it does not make sense to do massively parallel delivery
    # to the same user, because mailbox updates must happen sequentially,
    # and expensive pipelines in .forward files can cause disasters when
    # too many are run at the same time. With SMTP deliveries, 10
    # simultaneous connections to the same domain could be sufficient to
    # raise eyebrows.
    #
    # Each message delivery transport has its XXX_destination_concurrency_limit
    # parameter. The default is $default_destination_concurrency_limit for
    # most delivery transports. For the local delivery agent the default is 2.

    #local_destination_concurrency_limit = 2
    #default_destination_concurrency_limit = 20

    # DEBUGGING CONTROL
    #
    # The debug_peer_level parameter specifies the increment in verbose
    # logging level when an SMTP client or server host name or address
    # matches a pattern in the debug_peer_list parameter.
    #
    debug_peer_level = 2

    # The debug_peer_list parameter specifies an optional list of domain
    # or network patterns, /file/name patterns or type:name tables. When
    # an SMTP client or server host name or address matches a pattern,
    # increase the verbose logging level by the amount specified in the
    # debug_peer_level parameter.
    #
    #debug_peer_list = 127.0.0.1
    #debug_peer_list = some.domain

    # The debugger_command specifies the external command that is executed
    # when a Postfix daemon program is run with the -D option.
    #
    # Use "command .. & sleep 5" so that the debugger can attach before
    # the process marches on. If you use an X-based debugger, be sure to
    # set up your XAUTHORITY environment variable before starting Postfix.
    #
    debugger_command =
    PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
    xxgdb $daemon_directory/$process_name $process_id & sleep 5

    # If you can't use X, use this to capture the call stack when a
    # daemon crashes. The result is in a file in the configuration
    # directory, and is named after the process name and the process ID.
    #
    # debugger_command =
    # PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
    # echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
    # >$config_directory/$process_name.$process_id.log & sleep 5
    #
    # Another possibility is to run gdb under a detached screen session.
    # To attach to the screen sesssion, su root and run "screen -r
    # <id_string>" where <id_string> uniquely matches one of the detached
    # sessions (from "screen -list").
    #
    # debugger_command =
    # PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
    # -dmS $process_name gdb $daemon_directory/$process_name
    # $process_id & sleep 1

    # INSTALL-TIME CONFIGURATION INFORMATION
    #
    # The following parameters are used when installing a new Postfix version.
    #
    # sendmail_path: The full pathname of the Postfix sendmail command.
    # This is the Sendmail-compatible mail posting interface.
    #
    sendmail_path = /usr/sbin/sendmail

    # newaliases_path: The full pathname of the Postfix newaliases command.
    # This is the Sendmail-compatible command to build alias databases.
    #
    newaliases_path = /usr/bin/newaliases

    # mailq_path: The full pathname of the Postfix mailq command. This
    # is the Sendmail-compatible mail queue listing command.
    #
    mailq_path = /usr/bin/mailq

    # setgid_group: The group for mail submission and queue management
    # commands. This must be a group name with a numerical group ID that
    # is not shared with other accounts, not even with the Postfix account.
    #
    setgid_group = maildrop

    # html_directory: The location of the Postfix HTML documentation.
    #
    html_directory = /usr/share/doc/packages/postfix/html

    # manpage_directory: The location of the Postfix on-line manual pages.
    #
    manpage_directory = /usr/share/man

    # sample_directory: The location of the Postfix sample configuration files.
    # This parameter is obsolete as of Postfix 2.1.
    #
    sample_directory = /usr/share/doc/packages/postfix/samples

    # readme_directory: The location of the Postfix README files.
    #
    readme_directory = /usr/share/doc/packages/postfix/README_FILES
    inet_protocols = all
    biff = no
    und die master.cf

    #
    # Postfix master process configuration file. For details on the format
    # of the file, see the Postfix master(5) manual page.
    #
    # ================================================== ========================
    # service type private unpriv chroot wakeup maxproc command + args
    # (yes) (yes) (yes) (never) (100)
    # ================================================== ========================

    #submission inet n - n - - smtpd
    # -o smtpd_etrn_restrictions=reject
    # -o smtpd_client_restrictions=permit_sasl_authenticate d,reject
    #smtps inet n - n - - smtpd
    # -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
    #submission inet n - n - - smtpd
    # -o smtpd_etrn_restrictions=reject
    # -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
    #628 inet n - n - - qmqpd
    pickup fifo n - n 60 1 pickup
    cleanup unix n - n - 0 cleanup
    qmgr fifo n - n 300 1 qmgr
    #qmgr fifo n - n 300 1 oqmgr
    tlsmgr unix - - n 1000? 1 tlsmgr
    rewrite unix - - n - - trivial-rewrite
    bounce unix - - n - 0 bounce
    defer unix - - n - 0 bounce
    trace unix - - n - 0 bounce
    verify unix - - n - 1 verify
    flush unix n - n 1000? 0 flush
    proxymap unix - - n - - proxymap
    smtp unix - - n - - smtp
    # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
    relay unix - - n - - smtp
    -o fallback_relay=
    # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq unix n - n - - showq
    error unix - - n - - error
    discard unix - - n - - discard
    local unix - n n - - local
    virtual unix - n n - - virtual
    lmtp unix - - n - - lmtp
    anvil unix - - n - 1 anvil
    #localhost:10025 inet n - y - - smtpd -o content_filter=smtp:[127.0.0.1]:10026
    #localhost:10027 inet n - n - - smtpd -o content_filter=
    scache unix - - n - 1 scache
    #
    # ================================================== ==================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent. See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ================================================== ==================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop unix - n n - - pipe
    flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
    cyrus unix - n n - - pipe
    user=cyrus argv=/usr/lib/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
    uucp unix - n n - - pipe
    flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    ifmail unix - n n - - pipe
    flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp unix - n n - - pipe
    flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
    procmail unix - n n - - pipe
    flags=R user=nobody argv=/usr/bin/procmail -t -m /etc/procmailrc ${sender} ${recipient}
    Geändert von luckystrikerulz (17.09.06 um 01:07 Uhr)

  4. #4
    Registrierter Benutzer
    Registriert seit
    Jul 2006
    Ort
    Hamburg
    Beiträge
    624
    Dein Postfix hört auf deine Dyndns-Domäne
    Code:
    myhostname = xxxxxx.dyndns.org
    Deine eMail-Adresse ist aber eine andere (Hast Du im Logauszug ja unkenntlich gemacht). Daher versendet Postfix die Mails an deinen Provider.

    Lösung: Fetchmail muss die Mails an die lokale Maildomäne zustellen.
    Geändert von Thorashh (17.09.06 um 02:22 Uhr) Grund: eMail-Adresse anonymisiert

  5. #5
    Registrierter Benutzer
    Registriert seit
    Sep 2005
    Beiträge
    116
    wenn ich dort den hinteren teil meiner mailadresse eingebe kommt das hier


    Code:
    Sep 17 02:04:58 linux postfix/qmgr[4897]: E7A0E22296: from=<>, size=3766, nrcpt=1 (queue active)
    Sep 17 02:04:58 linux postfix/qmgr[4897]: E7A0E22296: to=<till@xxxxxx.de>, relay=none, delay=11713, status=deferred (delivery temporarily suspended: transport is unavailable)
    Sep 17 02:04:58 linux postfix/qmgr[4897]: warning: E7A0E22296: flush service failure
    
    
    
    Sep 17 02:05:57 linux postfix/qmgr[4897]: warning: connect to transport cyrus: Operation not permitted
    Sep 17 02:06:57 linux postfix/qmgr[4897]: warning: connect to transport cyrus: Operation not permitted
    Sep 17 02:07:57 linux postfix/qmgr[4897]: warning: connect to transport cyrus: Operation not permitted
    wenn ich irgentnen anderen namen dort eingebe kommt der fehler von oben



    PS: der fehler lag an appamor und is jetz wech
    Geändert von luckystrikerulz (17.09.06 um 02:57 Uhr) Grund: prob gelöst

  6. #6
    Registrierter Benutzer
    Registriert seit
    Sep 2005
    Beiträge
    116

    neues problem

    Code:
    Sep 17 14:14:36 linux spampd[4145]: processing message <19264.84.140.109.93.xxxxxxxx.squirrel@www.xxxxxxxx.de> for <till@localhost.xxxxxxxxxx.de>
    Sep 17 14:14:36 linux spampd[4145]: auto-whitelist: open of auto-whitelist file failed: locker: safe_lock: cannot create tmp lockfile //.spamassassin/auto-whitelist.lock.linux.4145 for //.spamassassin/auto-whitelist.lock: Permission denied
    Sep 17 14:14:36 linux spampd[4145]: clean message <19264.84.140.109.9xxxxxxxxxxxxxx.squirrel@www.xxxxxx.de> (0.55/5.00) from <lucky-strike@xxxxxxxx.de> for <till@localhost.xxxxxx.de> in 0.56s, 11097 bytes.
    er meckert jetzt dasser da irgentwo nit schreiben darf!

    ich habe dem betreffenden order mal alle rechte gegeben, aber das ändert auch nix

  7. #7
    Registrierter Benutzer
    Registriert seit
    Sep 2005
    Beiträge
    116
    soooo, nun habe ich endlich dem richtigen order mehr rechte gegeben! nun kommt aber dad hier inner log


    Sep 17 21:57:34 linux spampd[16027]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.45s, 5658 bytes.
    Sep 17 21:57:34 linux postfix/cleanup[16295]: 78F6B22029: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:34 linux postfix/qmgr[3837]: 78F6B22029: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=5842, nrcpt=1 (queue active)
    Sep 17 21:57:34 linux postfix/smtp[16297]: 36B442228F: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 Ok: queued as 78F6B22029)
    Sep 17 21:57:34 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 21:57:34 linux postfix/qmgr[3837]: 36B442228F: removed
    Sep 17 19:57:34 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:34 linux postfix/smtpd[16300]: 81A6822511: client=unknown[127.0.0.1]
    Sep 17 21:57:34 linux postfix/cleanup[16295]: 81A6822511: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:34 linux postfix/qmgr[3837]: 81A6822511: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=6274, nrcpt=1 (queue active)
    Sep 17 19:57:34 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:34 linux postfix/smtpd[16292]: connect from localhost[127.0.0.1]
    Sep 17 21:57:34 linux postfix/smtpd[16292]: B340322587: client=localhost[127.0.0.1]
    Sep 17 21:57:34 linux amavis[16306]: (16306-01) Passed CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: guLsmUfXWAMW, Hits: -0.784, 608 ms
    Sep 17 21:57:34 linux postfix/smtp[16301]: 78F6B22029: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 2.6.0 Ok, id=16306-01, from MTA([127.0.0.1]:10025): 250 Ok: queued as 81A6822511)
    Sep 17 21:57:34 linux postfix/qmgr[3837]: 78F6B22029: removed
    Sep 17 21:57:34 linux spampd[16190]: processing message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > for <till@xxxxxxxxxxxxxxxxxx.de>
    Sep 17 21:57:35 linux spampd[16190]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.35s, 6274 bytes.
    Sep 17 21:57:35 linux postfix/cleanup[16295]: B340322587: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:35 linux postfix/qmgr[3837]: B340322587: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=6458, nrcpt=1 (queue active)
    Sep 17 21:57:35 linux postfix/smtp[16297]: 81A6822511: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 Ok: queued as B340322587)
    Sep 17 21:57:35 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 21:57:35 linux postfix/qmgr[3837]: 81A6822511: removed
    Sep 17 19:57:35 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:35 linux postfix/smtpd[16300]: C004722514: client=unknown[127.0.0.1]
    Sep 17 21:57:35 linux postfix/cleanup[16295]: C004722514: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:35 linux postfix/qmgr[3837]: C004722514: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=6890, nrcpt=1 (queue active)
    Sep 17 19:57:35 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:36 linux amavis[16308]: (16308-01) Passed CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: sw468lD0CbZU, Hits: -0.784, 605 ms
    Sep 17 21:57:36 linux postfix/smtp[16301]: B340322587: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=2, status=sent (250 2.6.0 Ok, id=16308-01, from MTA([127.0.0.1]:10025): 250 Ok: queued as C004722514)
    Sep 17 21:57:36 linux postfix/qmgr[3837]: B340322587: removed
    Sep 17 21:57:36 linux postfix/smtpd[16292]: connect from localhost[127.0.0.1]
    Sep 17 21:57:36 linux postfix/smtpd[16292]: 1632F22587: client=localhost[127.0.0.1]
    Sep 17 21:57:36 linux spampd[16027]: processing message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > for <till@xxxxxxxxxxxxxxxxxx.de>
    Sep 17 21:57:36 linux spampd[16027]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.37s, 6890 bytes.
    Sep 17 21:57:36 linux postfix/cleanup[16295]: 1632F22587: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:36 linux postfix/qmgr[3837]: 1632F22587: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=7074, nrcpt=1 (queue active)
    Sep 17 21:57:36 linux postfix/smtp[16297]: C004722514: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 Ok: queued as 1632F22587)
    Sep 17 21:57:36 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 21:57:36 linux postfix/qmgr[3837]: C004722514: removed
    Sep 17 19:57:36 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:37 linux postfix/smtpd[16300]: 00A9922514: client=unknown[127.0.0.1]
    Sep 17 21:57:37 linux postfix/cleanup[16295]: 00A9922514: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:37 linux postfix/qmgr[3837]: 00A9922514: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=7506, nrcpt=1 (queue active)
    Sep 17 19:57:37 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:37 linux postfix/smtpd[16292]: connect from localhost[127.0.0.1]
    Sep 17 21:57:37 linux postfix/smtpd[16292]: 41ACE22599: client=localhost[127.0.0.1]
    Sep 17 21:57:37 linux amavis[16306]: (16306-02) Passed CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: UG30lEy8QpgJ, Hits: -0.784, 559 ms
    Sep 17 21:57:37 linux postfix/smtp[16301]: 1632F22587: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 2.6.0 Ok, id=16306-02, from MTA([127.0.0.1]:10025): 250 Ok: queued as 00A9922514)
    Sep 17 21:57:37 linux postfix/qmgr[3837]: 1632F22587: removed
    Sep 17 21:57:38 linux spampd[16310]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.65s, 7506 bytes.
    Sep 17 21:57:38 linux postfix/cleanup[16295]: 41ACE22599: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:38 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 21:57:38 linux postfix/qmgr[3837]: 41ACE22599: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=7690, nrcpt=1 (queue active)
    Sep 17 21:57:38 linux postfix/smtp[16297]: 00A9922514: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=2, status=sent (250 Ok: queued as 41ACE22599)
    Sep 17 21:57:38 linux postfix/qmgr[3837]: 00A9922514: removed
    Sep 17 19:57:38 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:38 linux postfix/smtpd[16300]: 7164A22514: client=unknown[127.0.0.1]
    Sep 17 21:57:38 linux postfix/cleanup[16295]: 7164A22514: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:38 linux postfix/qmgr[3837]: 7164A22514: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=8122, nrcpt=1 (queue active)
    Sep 17 19:57:38 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:38 linux postfix/smtpd[16292]: connect from localhost[127.0.0.1]
    Sep 17 21:57:38 linux postfix/smtpd[16292]: A69E422598: client=localhost[127.0.0.1]
    Sep 17 21:57:38 linux amavis[16308]: (16308-02) Passed CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: JEUcT+iT2Atq, Hits: -0.784, 555 ms
    Sep 17 21:57:38 linux postfix/smtp[16301]: 41ACE22599: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 2.6.0 Ok, id=16308-02, from MTA([127.0.0.1]:10025): 250 Ok: queued as 7164A22514)
    Sep 17 21:57:38 linux postfix/qmgr[3837]: 41ACE22599: removed
    Sep 17 21:57:38 linux spampd[16027]: processing message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > for <till@xxxxxxxxxxxxxxxxxx.de>
    Sep 17 21:57:39 linux spampd[16027]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.40s, 8122 bytes.
    Sep 17 21:57:39 linux postfix/cleanup[16295]: A69E422598: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:39 linux postfix/qmgr[3837]: A69E422598: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=8306, nrcpt=1 (queue active)
    Sep 17 21:57:39 linux postfix/smtp[16297]: 7164A22514: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 Ok: queued as A69E422598)
    Sep 17 21:57:39 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 21:57:39 linux postfix/qmgr[3837]: 7164A22514: removed
    Sep 17 19:57:39 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:39 linux postfix/smtpd[16300]: 9D87022514: client=unknown[127.0.0.1]
    Sep 17 21:57:39 linux postfix/cleanup[16295]: 9D87022514: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:39 linux postfix/qmgr[3837]: 9D87022514: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=8738, nrcpt=1 (queue active)
    Sep 17 19:57:39 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:39 linux postfix/smtpd[16292]: connect from localhost[127.0.0.1]
    Sep 17 21:57:39 linux postfix/smtpd[16292]: DBFB422599: client=localhost[127.0.0.1]
    Sep 17 21:57:39 linux amavis[16306]: (16306-03) Passed CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: 6vSFKR52BpRW, Hits: -0.784, 581 ms
    Sep 17 21:57:39 linux postfix/smtp[16301]: A69E422598: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 2.6.0 Ok, id=16306-03, from MTA([127.0.0.1]:10025): 250 Ok: queued as 9D87022514)
    Sep 17 21:57:39 linux postfix/qmgr[3837]: A69E422598: removed
    Sep 17 21:57:40 linux spampd[16310]: processing message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > for <till@xxxxxxxxxxxxxxxxxx.de>
    Sep 17 21:57:40 linux spampd[16310]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.41s, 8738 bytes.
    Sep 17 21:57:40 linux postfix/cleanup[16295]: DBFB422599: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:40 linux postfix/qmgr[3837]: DBFB422599: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=8922, nrcpt=1 (queue active)
    Sep 17 21:57:40 linux postfix/smtp[16297]: 9D87022514: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 Ok: queued as DBFB422599)
    Sep 17 21:57:40 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 21:57:40 linux postfix/qmgr[3837]: 9D87022514: removed
    Sep 17 19:57:40 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:40 linux postfix/smtpd[16300]: D495222514: client=unknown[127.0.0.1]
    Sep 17 21:57:40 linux postfix/cleanup[16295]: D495222514: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:41 linux postfix/qmgr[3837]: D495222514: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=9354, nrcpt=1 (queue active)
    Sep 17 19:57:41 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:41 linux postfix/smtpd[16292]: connect from localhost[127.0.0.1]
    Sep 17 21:57:41 linux amavis[16308]: (16308-03) Passed CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: JCP3vwlfY55h, Hits: -0.784, 580 ms
    Sep 17 21:57:41 linux postfix/smtpd[16292]: 2533922587: client=localhost[127.0.0.1]
    Sep 17 21:57:41 linux postfix/smtp[16301]: DBFB422599: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=2, status=sent (250 2.6.0 Ok, id=16308-03, from MTA([127.0.0.1]:10025): 250 Ok: queued as D495222514)
    Sep 17 21:57:41 linux postfix/qmgr[3837]: DBFB422599: removed
    Sep 17 21:57:41 linux spampd[16027]: processing message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > for <till@xxxxxxxxxxxxxxxxxx.de>
    Sep 17 21:57:41 linux spampd[16027]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.44s, 9354 bytes.
    Sep 17 21:57:41 linux postfix/cleanup[16295]: 2533922587: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:41 linux postfix/qmgr[3837]: 2533922587: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=9538, nrcpt=1 (queue active)
    Sep 17 21:57:41 linux postfix/smtp[16297]: D495222514: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 Ok: queued as 2533922587)
    Sep 17 21:57:41 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 21:57:41 linux postfix/qmgr[3837]: D495222514: removed
    Sep 17 19:57:42 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:42 linux postfix/smtpd[16300]: 225FD22514: client=unknown[127.0.0.1]
    Sep 17 21:57:42 linux postfix/cleanup[16295]: 225FD22514: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:42 linux postfix/qmgr[3837]: 225FD22514: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=9970, nrcpt=1 (queue active)
    Sep 17 19:57:42 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:42 linux postfix/smtpd[16292]: connect from localhost[127.0.0.1]
    Sep 17 21:57:42 linux postfix/smtpd[16292]: 5B79B22599: client=localhost[127.0.0.1]
    Sep 17 21:57:42 linux amavis[16306]: (16306-04) Passed CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: XKU-4eZpDlPl, Hits: -0.784, 607 ms
    Sep 17 21:57:42 linux postfix/smtp[16301]: 2533922587: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 2.6.0 Ok, id=16306-04, from MTA([127.0.0.1]:10025): 250 Ok: queued as 225FD22514)
    Sep 17 21:57:42 linux postfix/qmgr[3837]: 2533922587: removed
    Sep 17 21:57:42 linux spampd[16310]: processing message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > for <till@xxxxxxxxxxxxxxxxxx.de>
    Sep 17 21:57:43 linux spampd[16310]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.58s, 9970 bytes.
    Sep 17 21:57:43 linux postfix/cleanup[16295]: 5B79B22599: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:43 linux postfix/qmgr[3837]: 5B79B22599: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=10154, nrcpt=1 (queue active)
    Sep 17 21:57:43 linux postfix/smtp[16297]: 225FD22514: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 Ok: queued as 5B79B22599)
    Sep 17 21:57:43 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 21:57:43 linux postfix/qmgr[3837]: 225FD22514: removed
    Sep 17 19:57:43 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:43 linux postfix/smtpd[16300]: 823E022514: client=unknown[127.0.0.1]
    Sep 17 21:57:43 linux postfix/cleanup[16295]: 823E022514: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:43 linux postfix/qmgr[3837]: 823E022514: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=10586, nrcpt=1 (queue active)
    Sep 17 19:57:43 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:43 linux postfix/smtpd[16292]: connect from localhost[127.0.0.1]
    Sep 17 21:57:43 linux postfix/smtpd[16292]: C110A22598: client=localhost[127.0.0.1]
    Sep 17 21:57:43 linux amavis[16308]: (16308-04) Passed CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: aBBcJz7CVh99, Hits: -0.784, 603 ms
    Sep 17 21:57:43 linux postfix/smtp[16301]: 5B79B22599: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 2.6.0 Ok, id=16308-04, from MTA([127.0.0.1]:10025): 250 Ok: queued as 823E022514)
    Sep 17 21:57:43 linux postfix/qmgr[3837]: 5B79B22599: removed
    Sep 17 21:57:43 linux spampd[16027]: processing message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > for <till@xxxxxxxxxxxxxxxxxx.de>
    Sep 17 21:57:44 linux spampd[16027]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.47s, 10586 bytes.
    Sep 17 21:57:44 linux postfix/cleanup[16295]: C110A22598: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:44 linux postfix/qmgr[3837]: C110A22598: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=10770, nrcpt=1 (queue active)
    Sep 17 21:57:44 linux postfix/smtp[16297]: 823E022514: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 Ok: queued as C110A22598)
    Sep 17 21:57:44 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 21:57:44 linux postfix/qmgr[3837]: 823E022514: removed
    Sep 17 19:57:44 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:44 linux postfix/smtpd[16300]: D145422514: client=unknown[127.0.0.1]
    Sep 17 21:57:44 linux postfix/cleanup[16295]: D145422514: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:45 linux postfix/qmgr[3837]: D145422514: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=11202, nrcpt=1 (queue active)
    Sep 17 19:57:45 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:45 linux postfix/smtpd[16292]: connect from localhost[127.0.0.1]
    Sep 17 21:57:45 linux postfix/smtpd[16292]: 1538322599: client=localhost[127.0.0.1]
    Sep 17 21:57:45 linux amavis[16306]: (16306-05) Passed CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: Wu9TAE-6NJg4, Hits: -0.784, 607 ms
    Sep 17 21:57:45 linux postfix/smtp[16301]: C110A22598: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=2, status=sent (250 2.6.0 Ok, id=16306-05, from MTA([127.0.0.1]:10025): 250 Ok: queued as D145422514)
    Sep 17 21:57:45 linux postfix/qmgr[3837]: C110A22598: removed
    Sep 17 21:57:45 linux spampd[16310]: processing message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > for <till@xxxxxxxxxxxxxxxxxx.de>
    Sep 17 21:57:45 linux spampd[16310]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.48s, 11202 bytes.
    Sep 17 21:57:45 linux postfix/cleanup[16295]: 1538322599: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:45 linux postfix/qmgr[3837]: 1538322599: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=11386, nrcpt=1 (queue active)
    Sep 17 21:57:45 linux postfix/smtp[16297]: D145422514: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 Ok: queued as 1538322599)
    Sep 17 21:57:45 linux postfix/qmgr[3837]: D145422514: removed
    Sep 17 21:57:45 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 19:57:46 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:46 linux postfix/smtpd[16300]: 2C6DD22514: client=unknown[127.0.0.1]
    Sep 17 21:57:46 linux postfix/cleanup[16295]: 2C6DD22514: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:46 linux postfix/qmgr[3837]: 2C6DD22514: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=11818, nrcpt=1 (queue active)
    Sep 17 19:57:46 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:46 linux postfix/smtpd[16292]: connect from localhost[127.0.0.1]
    Sep 17 21:57:46 linux postfix/smtpd[16292]: 6451422598: client=localhost[127.0.0.1]
    Sep 17 21:57:46 linux amavis[16308]: (16308-05) Passed CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: n4zeuEjaPZsl, Hits: -0.784, 633 ms
    Sep 17 21:57:46 linux postfix/smtp[16301]: 1538322599: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 2.6.0 Ok, id=16308-05, from MTA([127.0.0.1]:10025): 250 Ok: queued as 2C6DD22514)
    Sep 17 21:57:46 linux postfix/qmgr[3837]: 1538322599: removed
    Sep 17 21:57:46 linux spampd[16027]: processing message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > for <till@xxxxxxxxxxxxxxxxxx.de>
    Sep 17 21:57:47 linux spampd[16027]: clean message <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de > (-0.74/5.00) from <till@xxxxxxxxxxxxxxxxxx.de> for <till@xxxxxxxxxxxxxxxxxx.de> in 0.49s, 11818 bytes.
    Sep 17 21:57:47 linux postfix/cleanup[16295]: 6451422598: message-id=<20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:47 linux postfix/qmgr[3837]: 6451422598: from=<till@xxxxxxxxxxxxxxxxxx.de>, size=12002, nrcpt=1 (queue active)
    Sep 17 21:57:47 linux postfix/smtp[16297]: 2C6DD22514: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=1, status=sent (250 Ok: queued as 6451422598)
    Sep 17 21:57:47 linux postfix/smtpd[16292]: disconnect from localhost[127.0.0.1]
    Sep 17 21:57:47 linux postfix/qmgr[3837]: 2C6DD22514: removed
    Sep 17 19:57:47 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:47 linux postfix/smtpd[16300]: 7FE6E22514: client=unknown[127.0.0.1]
    Sep 17 19:57:47 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:47 linux amavis[16306]: (16306-06) FWD via SMTP: <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, 554 5.6.0 Failed, id=16306-06, from MTA([127.0.0.1]:10025): 554 Error: too many hops
    Sep 17 21:57:47 linux amavis[16306]: (16306-06) Blocked CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de >, mail_id: b1T47FCn4Yyn, Hits: -0.784, 528 ms
    Sep 17 21:57:48 linux postfix/smtp[16301]: 6451422598: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=2, status=bounced (host 127.0.0.1[127.0.0.1] said: 554 5.6.0 Failed, id=16306-06, from MTA([127.0.0.1]:10025): 554 Error: too many hops (in reply to end of DATA command))
    Sep 17 21:57:48 linux postfix/cleanup[16295]: 0AF5A22587: message-id=<20060917195748.0AF5A22587@xxxxxxxxxxxxxxxxxx.d e>
    Sep 17 21:57:48 linux postfix/qmgr[3837]: 0AF5A22587: from=<>, size=13922, nrcpt=1 (queue active)
    Sep 17 21:57:48 linux postfix/qmgr[3837]: 6451422598: removed
    Sep 17 21:57:48 linux postfix/pipe[16323]: 0AF5A22587: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=cyrus, delay=0, status=sent (xxxxxxxxxxxxxxxxxx.de)
    Sep 17 21:57:48 linux postfix/qmgr[3837]: 0AF5A22587: removed

  8. #8
    Registrierter Benutzer
    Registriert seit
    Jun 2004
    Beiträge
    801
    Was willst du mit deinem riesigen Logfile sagen? Ich bin nur kurz drübergeflogen und sehe dass dein Mailserver nicht ganz funktioniert...

    Das hier können wir auch nicht nachvollziehen, wenn du alles publik machst...
    Code:
    p 17 19:57:47 linux postfix/smtpd[16300]: connect from unknown[127.0.0.1]
    Sep 17 19:57:47 linux postfix/smtpd[16300]: 7FE6E22514: client=unknown[127.0.0.1]
    Sep 17 19:57:47 linux postfix/smtpd[16300]: disconnect from unknown[127.0.0.1]
    Sep 17 21:57:47 linux amavis[16306]: (16306-06) FWD via SMTP: <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, 554 5.6.0 Failed, id=16306-06, from MTA([127.0.0.1]:10025): 554 Error: too many hops
    Sep 17 21:57:47 linux amavis[16306]: (16306-06) Blocked CLEAN, [127.0.0.1] <till@xxxxxxxxxxxxxxxxxx.de> -> <till@xxxxxxxxxxxxxxxxxx.de>, Message-ID: <20060917195718.EDECA22308@xxxxxxxxxxxxxxxxxx.de>, mail_id: b1T47FCn4Yyn, Hits: -0.784, 528 ms
    Sep 17 21:57:48 linux postfix/smtp[16301]: 6451422598: to=<till@xxxxxxxxxxxxxxxxxx.de>, relay=127.0.0.1[127.0.0.1], delay=2, status=bounced (host 127.0.0.1[127.0.0.1] said: 554 5.6.0 Failed, id=16306-06, from MTA([127.0.0.1]:10025): 554 Error: too many hops (in reply to end of DATA command))

  9. #9
    Registrierter Benutzer
    Registriert seit
    Jul 2006
    Ort
    Hamburg
    Beiträge
    624
    So wie das aussieht, hast Du dir eine schöne Mailschleife gebaut. Postfix scheint die Mails an sich selber zu schicken.
    Deswegen "connect from localhost[127.0.0.1]" und dann "554 Error: too many hops".
    Überprüf mal genau, welchen Weg die Mails nehmen sollten und welchen Weg sie wirklich nehmen.

  10. #10
    Registrierter Benutzer
    Registriert seit
    Sep 2005
    Beiträge
    116
    hmm komisch... den postausgang habe ich doch hier eingestellt:




    hmmmmm.... liegt irgentwie an dem spampd! denn mit eingeschleiftem virenscanner läuft es! er muckt nur rum, wenn die ziele für den Spamsortierer auch mit in der master.cf drin ist
    Geändert von luckystrikerulz (22.09.06 um 16:24 Uhr)

  11. #11
    Registrierter Benutzer
    Registriert seit
    Sep 2005
    Beiträge
    116
    keiner ne idee?

  12. #12
    Registrierter Benutzer
    Registriert seit
    Jun 2004
    Beiträge
    801
    Zitat Zitat von luckystrikerulz Beitrag anzeigen
    keiner ne idee?
    doch, die dokumenation lesen

    fang einmal mit der kinderleichten konfiguration hier an...

  13. #13
    Registrierter Benutzer
    Registriert seit
    Sep 2005
    Beiträge
    116
    Zitat Zitat von Fly Beitrag anzeigen
    doch, die dokumenation lesen

    fang einmal mit der kinderleichten konfiguration hier an...
    ja in der kinderleichten form läuft es ja bei mir!!!! (bis auf den fakt, dass ich von ausserhalb des netzwerkes keine mails senden kann, sondern nur empfangen, aber das ist erstmal nebensächlich )

    nur eben wenn ich den spam-schutz miteinschleife dreht er sich im kreis!
    ich kann aus den logs den fehler nicht rauslesen und weiss auch net in welcher conf die spamgeschichte festgelegt wird...
    komisch kommt mir vor, dass wenn ich den spamannahme port telnette, dass da postfix rangeht... von daher is vllt n falscher port in der conf oder sowas

  14. #14
    Registrierter Benutzer
    Registriert seit
    Sep 2005
    Beiträge
    116
    hmmmm... ich kann die config von spamassisin nicht finden!

    irgentwelche tips?

  15. #15
    Registrierter Benutzer
    Registriert seit
    Feb 2004
    Beiträge
    74
    Zitat Zitat von luckystrikerulz Beitrag anzeigen
    hmmmm... ich kann die config von spamassisin nicht finden!

    irgentwelche tips?
    liegt in /etc/mail/spamassassin

Ähnliche Themen

  1. Postfix & Cyrus-Imap
    Von nr8 im Forum Linux als Server
    Antworten: 22
    Letzter Beitrag: 14.06.06, 17:03
  2. problem mit postfix, qpopper und fetchmail
    Von mullfreak im Forum Linux als Server
    Antworten: 3
    Letzter Beitrag: 21.02.05, 19:04
  3. Postfix - Mail wird nicht gesendet
    Von SpeedyOne im Forum Linux als Server
    Antworten: 5
    Letzter Beitrag: 28.12.04, 17:12
  4. Cyrus Imap Server Problem
    Von eurofreddy im Forum Anwendungen Allgemein, Software
    Antworten: 0
    Letzter Beitrag: 17.08.04, 07:30
  5. Macht POSTFIX den ganzen Server lahm?
    Von gedanke im Forum Linux als Server
    Antworten: 12
    Letzter Beitrag: 20.12.03, 01:51

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •