Anzeige:
Ergebnis 1 bis 6 von 6

Thema: Tastatur spinnt

  1. #1
    Registrierter Benutzer
    Registriert seit
    Feb 2004
    Beiträge
    400

    Tastatur spinnt

    Hallo, ich habe folgendes Problem (SUSE 10.1, Sony Laptop)..
    und zwar scheint die Tastatur(?) irgendwie zu spinnen. Wenn ich etwas schreibe springt der Cursor sporadisch einfach ein paar Zeilen hoch / runter.. so genau kann ich das nicht sagen. Hin und wieder wechselt auch das Fenster (als hätte ich ALT-TAB gedrückt). Unter windows habe ich dieses Problem nicht, also scheidet ein Hardwareproblem aus.....

    hat da einer eine idee woran das liegen könnte?

  2. #2
    Registrierter Benutzer
    Registriert seit
    Dec 2003
    Ort
    Dettenhausen
    Beiträge
    22.054
    du turnst aber nicht zufällig beim Tippen auf dem Mousepad rum?
    Ich bin root - ich darf das.

  3. #3
    Registrierter Benutzer
    Registriert seit
    Feb 2004
    Beiträge
    400
    hehe, habe ich auch erst gedachte.. aber habe mal drauf geachtet und das ist definitiv nicht der fall

  4. #4
    Registrierter Benutzer Avatar von mabus
    Registriert seit
    Dec 2003
    Ort
    Castrop-Rauxel
    Beiträge
    571
    Hast du dabei mal drauf geachtet ob es dabei irgendwelche seltsamen Ausgaben bei dmesg auftreten?
    Meine Meinung steht fest, also verwirrt mich nicht mit Tatsachen
    -
    Allgemeine Linux-FAQ
    http://www.dcoul.de/faq/html/

  5. #5
    Registrierter Benutzer
    Registriert seit
    Feb 2004
    Beiträge
    400
    hmm, ich habe keine ahnung nach was man da suchen könnte aber: )
    Code:
    Linux version 2.6.16.13-4-smp (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Wed May 3 04:53:23 UTC 2006
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
     BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000005f670000 (usable)
     BIOS-e820: 000000005f670000 - 000000005f67e000 (ACPI data)
     BIOS-e820: 000000005f67e000 - 000000005f700000 (ACPI NVS)
     BIOS-e820: 000000005f700000 - 0000000060000000 (reserved)
     BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
     BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
     BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
     BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    630MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f6490
    On node 0 totalpages: 390768
      DMA zone: 4096 pages, LIFO batch:0
      DMA32 zone: 0 pages, LIFO batch:0
      Normal zone: 225280 pages, LIFO batch:31
      HighMem zone: 161392 pages, LIFO batch:31
    DMI present.
    Using APIC driver default
    ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f63c0
    ACPI: RSDT (v001   Sony       N0 0x20060412 PTL  0x00000000) @ 0x5f67648f
    ACPI: FADT (v002   Sony       N0 0x20060412 PTL  0x0000005a) @ 0x5f67ddde
    ACPI: MADT (v001   Sony       N0 0x20060412 PTL  0x0000005a) @ 0x5f67de62
    ACPI: BOOT (v001   Sony       N0 0x20060412 PTL  0x00000001) @ 0x5f67dfd8
    ACPI: MCFG (v001   Sony       N0 0x20060412 PTL  0x0000005a) @ 0x5f67df02
    ACPI: TCPA (v001   Sony       N0 0x20060412 PTL  0x00005a52) @ 0x5f67df3e
    ACPI: MADT (v001   Sony       N0 0x20060412 PTL  0x00000000) @ 0x5f67df70
    ACPI: SSDT (v001   Sony       N0 0x20060412 PTL  0x20050624) @ 0x5f6776b1
    ACPI: SSDT (v001   Sony       N0 0x20060412 PTL  0x20050624) @ 0x5f676ee6
    ACPI: SSDT (v001   Sony       N0 0x20060412 PTL  0x20050624) @ 0x5f6764d7
    ACPI: DSDT (v001   Sony       N0 0x20060412 PTL  0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: 2 duplicate APIC table ignored.
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:14 APIC version 20
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 6:14 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Overriding APIC driver with bigsmp
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode:  Physflat.  Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
    Built 1 zonelists
    Kernel command line: root=/dev/sda7 vga=0x314    resume=/dev/sda6  splash=silent
    bootsplash: silent mode.
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 2167.380 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1542340k/1563072k available (1612k kernel code, 19412k reserved, 730k data, 188k init, 645568k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 4341.79 BogoMIPS (lpj=8683587)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
    CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    checking if image is initramfs... it is
    Freeing initrd memory: 2370k freed
     not found!
    CPU0: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
    Leaving ESR disabled.
    Enabling SMP...
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Leaving ESR disabled.
    Calibrating delay using timer specific routine.. 4334.04 BogoMIPS (lpj=8668091)
    CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
    CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
    Total of 2 processors activated (8675.83 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization across 2 CPUs: passed.
    Enabling SMP...
    Brought up 2 CPUs
    migration_cost=4000
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd823, last bus=10
    PCI: Using configuration type 1
    ACPI: Subsystem revision 20060127
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    Boot video device is 0000:00:02.0
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses')
    Please report the result to linux-kernel to fix this permanently
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5
    ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
    ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
    ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
    ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
    ACPI: Embedded Controller [EC0] (gpe 23) interrupt mode.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 11 devices
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
    Setting up standard PCI resources
    PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    PCI: Bridge: 0000:00:1c.0
      IO window: 2000-2fff
      MEM window: d6000000-d7ffffff
      PREFETCH window: d0000000-d1ffffff
    PCI: Bridge: 0000:00:1c.1
      IO window: disabled.
      MEM window: dc100000-dc1fffff
      PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.2
      IO window: 3000-3fff
      MEM window: d8000000-d9ffffff
      PREFETCH window: d2000000-d3ffffff
    PCI: Bridge: 0000:00:1c.3
      IO window: 4000-4fff
      MEM window: da000000-dbffffff
      PREFETCH window: d4000000-d5ffffff
    PCI: Bus 10, cardbus bridge: 0000:09:04.0
      IO window: 00005000-000050ff
      IO window: 00005400-000054ff
      PREFETCH window: 68000000-69ffffff
      MEM window: 6a000000-6bffffff
    PCI: Bridge: 0000:00:1e.0
      IO window: 5000-5fff
      MEM window: dc000000-dc0fffff
      PREFETCH window: 68000000-69ffffff
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 201
    Simple Boot Flag at 0x37 set to 0x1
    apm: BIOS not found.
    audit: initializing netlink socket (disabled)
    audit(1155667689.588:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.3:pcie00]
    Allocate Port Service[0000:00:1c.3:pcie02]
    vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3750k, total 7872k
    vesafb: mode is 800x600x16, linelength=1600, pages=7
    vesafb: protected mode interface info at 00ff:44f0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 50686 bytes,<6>...found (800x600, 28094 bytes, v3).
    Console: switching to colour frame buffer device 96x33
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12ac
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    floppy0: no floppy controllers found
    RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input0
    input: PC Speaker as /class/input/input1
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
    TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Using IPI No-Shortcut mode
    ACPI wakeup devices: 
    PWRB S1F0 S1F1 S1F2 S1F3 S1F4 S1F5 S1F6 S1F7 TLAN DLAN S6F0 S6F1 S6F2 S6F3 S6F4 S6F5 S6F6 S6F7 USB1 USB2 USB3 USB4 USB7 SLT0 LANC  EC0 
    ACPI: (supports S0 S3 S4 S5)
    Freeing unused kernel memory: 188k freed
    Write protecting the kernel read-only data: 287k
    input: PS/2 Mouse as /class/input/input2
    input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    SCSI subsystem initialized
    Driver 'sd' needs updating - please use bus_type methods
    ICH7: IDE controller at PCI slot 0000:00:1f.1
    ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 58
    ICH7: chipset revision 2
    ICH7: not 100% native mode: will probe irqs later
        ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
    Probing IDE interface ide0...
    hda: MATSHITAUJ-832D, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    libata version 1.20 loaded.
    ata_piix 0000:00:1f.2: version 1.05
    ata_pci_init_one: pci_dev class+intf: 0x1018f
    ata_pci_init_one: NO_LEGACY == 0
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 58
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ata1: PATA max UDMA/133 cmd 0x18D0 ctl 0x18C6 bmdma 0x18B0 irq 58
    ata2: PATA max UDMA/133 cmd 0x18C8 ctl 0x18C2 bmdma 0x18B8 irq 58
    ata1: dev 0 cfg 00:045a 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:bf09 87:6063 88:203f 93:0000
    ata1: dev 0 ATA-7, max UDMA/100, 234441648 sectors: LBA48
    sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe05e0
    ata1: dev 0 configured for UDMA/100
    sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe05e0
    scsi0 : ata_piix
    ata2: disabling port
    scsi1 : ata_piix
      Vendor: ATA       Model: FUJITSU MHV2120B  Rev: 0000
      Type:   Direct-Access                      ANSI SCSI revision: 05
    SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
     sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
    sd 0:0:0:0: Attached scsi disk sda
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
    ACPI: Processor [CPU1] (supports 8 throttling states)
    ACPI: Thermal Zone [ATF0] (27 C)
    ACPI: Thermal Zone [DTS0] (16 C)
    ACPI: Thermal Zone [DTS1] (16 C)
    Attempting manual resume
    ReiserFS: sda7: found reiserfs format "3.6" with standard journal
    ReiserFS: sda7: using ordered data mode
    reiserfs: using flush barriers
    ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda7: checking transaction log (sda7)
    ReiserFS: sda7: Using r5 hash to sort names
    bootsplash: status on console 0 changed to off
    Adding 2104472k swap on /dev/sda6.  Priority:-1 extents:1 across:2104472k
    hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 201
    Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6]
    ieee1394: Initialized config rom entry `ip1394'
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    Yenta: ISA IRQ mask 0x0cf8, PCI irq 201
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
    cs: IO port probe 0x5000-0x5fff: clean.
    pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
    pcmcia: parent PCI bridge Memory window: 0x68000000 - 0x69ffffff
    ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 66
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66]  MMIO=[dc005000-dc0057ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 74
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: irq 74, io mem 0xdc544000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    USB Universal Host Controller Interface driver v2.3
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.16.13-4-smp ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    ieee80211_crypt: module not supported by Novell, setting U taint flag.
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211: module not supported by Novell, setting U taint flag.
    ieee80211: 802.11 data/management/control stack, git-1.1.7
    ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
    i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 193, io base 0x00001820
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ipw3945: module not supported by Novell, setting U taint flag.
    ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 0.0.73d
    ipw3945: Copyright(c) 2003-2006 Intel Corporation
    hw_random: RNG not detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 193, io base 0x00001840
    usb usb3: new device found, idVendor=0000, idProduct=0000
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    usb 1-4: new high speed USB device using ehci_hcd and address 2
    Linux agpgart interface v0.101 (c) Dave Jones
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 193, io base 0x00001860
    usb usb4: new device found, idVendor=0000, idProduct=0000
    usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.2
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usb 1-4: new device found, idVendor=054c, idProduct=0281
    usb 1-4: new device strings: Mfr=1, Product=2, SerialNumber=3
    usb 1-4: Product: UMH-U09
    usb 1-4: Manufacturer: Sony
    usb 1-4: SerialNumber: F00000166757
    usb 1-4: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 193, io base 0x00001880
    usb usb5: new device found, idVendor=0000, idProduct=0000
    usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.3
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:06:00.0 to 64
    ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
    agpgart: Detected an Intel 945GM Chipset.
    agpgart: Detected 7932K stolen memory.
    agpgart: AGP aperture is 256M @ 0xc0000000
    Initializing USB Mass Storage driver...
    usb 1-6: new high speed USB device using ehci_hcd and address 4
    ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460302232db3]
    usb 1-6: new device found, idVendor=05ca, idProduct=1830
    usb 1-6: new device strings: Mfr=0, Product=0, SerialNumber=0
    usb 1-6: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 66
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
    usb 4-1: new full speed USB device using uhci_hcd and address 2
    usb 4-1: new device found, idVendor=0483, idProduct=2016
    usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 4-1: Product: Biometric Coprocessor
    usb 4-1: Manufacturer: STMicroelectronics
    usb 4-1: configuration #1 chosen from 1 choice
    eth0 renamed to eth1
    scsi2 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usb 5-2: new full speed USB device using uhci_hcd and address 2
    usb 5-2: new device found, idVendor=044e, idProduct=300c
    usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 5-2: Product: UGX
    usb 5-2: Manufacturer: ALPS
    usb 5-2: configuration #1 chosen from 1 choice
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:07:00.0 to 64
    sky2 v0.15 addr 0xd8000000 irq 185 Yukon-FE (0xb7) rev 1
    sky2 eth0: addr 00:13:a9:3c:95:6c
    Bluetooth: Core ver 2.8
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: HCI USB driver ver 2.9
    usbcore: registered new driver hci_usb
    Bluetooth: L2CAP ver 2.8
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: HIDP (Human Interface Emulation) ver 1.1
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.7
    device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
    dm-netlink version 0.0.2 loaded
      Vendor: Sony      Model: USB   HS-CARD     Rev: 4.52
      Type:   Direct-Access                      ANSI SCSI revision: 00
    sd 2:0:0:0: Attached scsi removable disk sdb
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    usb-storage: device scan complete
    loop: loaded (max 8 devices)
    ReiserFS: sda8: found reiserfs format "3.6" with standard journal
    ReiserFS: sda8: using ordered data mode
    reiserfs: using flush barriers
    ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda8: checking transaction log (sda8)
    ReiserFS: sda8: Using r5 hash to sort names
    NTFS driver 2.1.26 [Flags: R/W MODULE].
    NTFS volume version 3.1.
    AppArmor: AppArmor (version 2.0-19.43r6320) initialized
    audit(1155667716.101:2): AppArmor (version 2.0-19.43r6320) initialized
    
    ACPI: AC Adapter [ACAD] (off-line)
    ACPI: Battery Slot [BAT1] (battery present)
    ACPI: Lid Switch [LID0]
    ACPI: Power Button (CM) [PWRB]
    sony_acpi: module not supported by Novell, setting U taint flag.
    ACPI Sony Notebook Control Driver v0.2 successfully installed
    BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
    IA-32 Microcode Update Driver v1.14 unregistered
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    vmmon: module not supported by Novell, setting U taint flag.
    vmmon: module license 'unspecified' taints kernel.
    /dev/vmmon[3356]: Module vmmon: registered with major=10 minor=165
    /dev/vmmon[3356]: Module vmmon: initialized
    vmnet: module not supported by Novell, setting U taint flag.
    /dev/vmnet: open called by PID 3400 (vmnet-bridge)
    /dev/vmnet: hub 0 does not exist, allocating memory.
    /dev/vmnet: port on hub 0 successfully opened
    bridge-eth1: peer interface eth1 not found, will wait for it to come up
    bridge-eth1: attached
    /dev/vmnet: open called by PID 3420 (vmnet-netifup)
    /dev/vmnet: hub 8 does not exist, allocating memory.
    /dev/vmnet: port on hub 8 successfully opened
    /dev/vmnet: open called by PID 3421 (vmnet-netifup)
    /dev/vmnet: hub 1 does not exist, allocating memory.
    /dev/vmnet: port on hub 1 successfully opened
    /dev/vmnet: open called by PID 3418 (vmnet-natd)
    /dev/vmnet: port on hub 8 successfully opened
    /dev/vmnet: open called by PID 3526 (vmnet-dhcpd)
    /dev/vmnet: port on hub 1 successfully opened
    /dev/vmnet: open called by PID 3527 (vmnet-dhcpd)
    /dev/vmnet: port on hub 8 successfully opened
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    bridge-eth1: enabling the bridge
    bridge-eth1: is a Wireless Adapter
    bridge-eth1: up
    sky2 eth0: enabling interface
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    vmnet8: no IPv6 routers present
    vmnet1: no IPv6 routers present
    NET: Registered protocol family 17
    ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
    ieee80211_crypt_tkip: module not supported by Novell, setting U taint flag.
    ieee80211_crypt: registered algorithm 'TKIP'
    eth1: no IPv6 routers present
    eth1: no IPv6 routers present
    bridge-eth1: disabling the bridge
    bridge-eth1: down
    sky2 eth0: disabling interface
    usbcore: deregistering driver usb-storage
    uhci_hcd 0000:00:1d.3: remove, state 1
    usb usb5: USB disconnect, address 1
    usb 5-2: USB disconnect, address 2
    uhci_hcd 0000:00:1d.3: USB bus 5 deregistered
    uhci_hcd 0000:00:1d.2: remove, state 1
    usb usb4: USB disconnect, address 1
    usb 4-1: USB disconnect, address 2
    uhci_hcd 0000:00:1d.2: USB bus 4 deregistered
    uhci_hcd 0000:00:1d.1: remove, state 1
    usb usb3: USB disconnect, address 1
    uhci_hcd 0000:00:1d.1: USB bus 3 deregistered
    uhci_hcd 0000:00:1d.0: remove, state 1
    usb usb2: USB disconnect, address 1
    uhci_hcd 0000:00:1d.0: USB bus 2 deregistered
    ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[0800460302232db3]
    Freezing cpus ...
    Breaking affinity for irq 57
    Breaking affinity for irq 58
    Breaking affinity for irq 66
    Breaking affinity for irq 74
    Breaking affinity for irq 105
    Breaking affinity for irq 137
    Breaking affinity for irq 145
    Breaking affinity for irq 169
    Breaking affinity for irq 177
    Breaking affinity for irq 185
    Breaking affinity for irq 193
    Breaking affinity for irq 201
    CPU 1 is now offline
    CPU1 is down
    Stopping tasks: =======================================================================================================|
    Shrinking memory...  -\|/done (54980 pages freed)
    ata1: suspend device
    eth1: Going into suspend...
    ipw3945: Error sending cmd #07 to daemon: time out after 500ms.
    ata_piix 0000:00:1f.2: suspend PCI device
    .................................................................................................................................................................swsusp: Need to copy 68668 pages
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    swsusp: Restoring Highmem
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 66
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 74
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    usb usb1: root hub lost power or was reset
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 58
    ata_piix 0000:00:1f.2: resume PCI device
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 58
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    eth1: Coming out of suspend...
    ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 177
    sky2 0000:07:00.0: unsupported chip type 0xff
    ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 201
    ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 66
    pnp: Device 00:09 does not supported activation.
    pnp: Device 00:0a does not supported activation.
    ata1: resume device
    sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe05e0
    ata1: dev 0 configured for UDMA/100
    Restarting tasks...<6>usb 1-4: USB disconnect, address 2
     done
    Thawing cpus ...
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Debug: sleeping function called from invalid context at mm/page_alloc.c:924
    in_atomic():0, irqs_disabled():1
     [<c0145e1d>] __alloc_pages+0x31/0x2a4
     [<c012032d>] printk+0x14/0x18
     [<c01460f2>] get_zeroed_page+0x31/0x3d
     [<c0109dec>] cpu_init+0x101/0x31d
     [<c0113636>] start_secondary+0xc/0x41c
     [<c0113a61>] cpu_exit_clear+0x1b/0x44
    Leaving ESR disabled.
    Calibrating delay using timer specific routine.. 4334.36 BogoMIPS (lpj=8668730)
    CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
    CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
    Enabling SMP...
    CPU1 is up
    usb 1-4: new high speed USB device using ehci_hcd and address 6
    usb 1-4: new device found, idVendor=054c, idProduct=0281
    usb 1-4: new device strings: Mfr=1, Product=2, SerialNumber=3
    usb 1-4: Product: UMH-U09
    usb 1-4: Manufacturer: Sony
    usb 1-4: SerialNumber: F00000166757
    usb 1-4: configuration #1 chosen from 1 choice
    usb 1-6: USB disconnect, address 4
    usb 1-6: new high speed USB device using ehci_hcd and address 8
    usb 1-6: new device found, idVendor=05ca, idProduct=1830
    usb 1-6: new device strings: Mfr=0, Product=0, SerialNumber=0
    usb 1-6: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi3 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 6
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
    ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 66
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66]  MMIO=[dc005000-dc0057ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    USB Universal Host Controller Interface driver v2.3
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 193, io base 0x00001820
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 193, io base 0x00001840
    usb usb3: new device found, idVendor=0000, idProduct=0000
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 193, io base 0x00001860
    usb usb4: new device found, idVendor=0000, idProduct=0000
    usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.2
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 193, io base 0x00001880
    usb usb5: new device found, idVendor=0000, idProduct=0000
    usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.3
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    usb 4-1: new full speed USB device using uhci_hcd and address 2
    usb 4-1: new device found, idVendor=0483, idProduct=2016
    usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 4-1: Product: Biometric Coprocessor
    usb 4-1: Manufacturer: STMicroelectronics
    usb 4-1: configuration #1 chosen from 1 choice
    usb 5-2: new full speed USB device using uhci_hcd and address 2
    ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460302232db3]
    usb 5-2: new device found, idVendor=044e, idProduct=300c
    usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 5-2: Product: UGX
    usb 5-2: Manufacturer: ALPS
    usb 5-2: configuration #1 chosen from 1 choice
    NTFS volume version 3.1.
      Vendor: Sony      Model: USB   HS-CARD     Rev: 4.52
      Type:   Direct-Access                      ANSI SCSI revision: 00
    sd 3:0:0:0: Attached scsi removable disk sdb
    sd 3:0:0:0: Attached scsi generic sg1 type 0
    usb-storage: device scan complete
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    bridge-eth1: enabling the bridge
    bridge-eth1: is a Wireless Adapter
    bridge-eth1: up
    sky2 eth0: enabling interface
    sky2 eth0: phy write timeout
    sky2 eth0: phy write timeout
    sky2 eth0: phy write timeout
    sky2 eth0: phy write timeout
    sky2 eth0: phy write timeout
    sky2 eth0: phy write timeout
    sky2 eth0: phy write timeout
    sky2 eth0: phy write timeout
    sky2 eth0: phy write timeout
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
    eth1: no IPv6 routers present

  6. #6
    Registrierter Benutzer
    Registriert seit
    Jul 2008
    Beiträge
    6
    Ich hab grad mal diesen Thread hier rausgekramt, weil ich genau das gleiche Problem hab wie der Thread-Eröffner. Hat jemand vielleicht eine Idee, woran das liegen kann?

    Schönen Tag wünsch ich noch!

Ähnliche Themen

  1. Tastatur Layout spinnt: "bad length in CompatMap"
    Von Deathcrow im Forum X-Konfiguration
    Antworten: 1
    Letzter Beitrag: 02.04.06, 20:02
  2. Richtig dickes USB Problem(Maus & Tastatur) !
    Von Mgotts im Forum stationäre Hardware
    Antworten: 4
    Letzter Beitrag: 24.10.04, 23:43
  3. Tastatur geht plötzlich nichtmehr
    Von JvM im Forum System installieren und konfigurieren
    Antworten: 9
    Letzter Beitrag: 22.03.04, 11:37
  4. Tastatur spinnt
    Von gU3Ss im Forum System installieren und konfigurieren
    Antworten: 1
    Letzter Beitrag: 21.03.04, 13:56
  5. DosEmu: Tastatur spinnt
    Von Trillian im Forum Emulatoren für Spiele
    Antworten: 0
    Letzter Beitrag: 20.07.03, 04:23

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •