Hallo liebe Fachleute!
Lange Zeit konnte ich unter SUSE 10.1 mit meiner WinTV-NOVA-S-Plus per kaffeine und xine ausgezeichnet fernsehen.
Nach einer Neu-Installation ist das leider nicht mehr so.
Leider kann ich anhand der Ausgabe von lspci nicht sehen, ob die TV-Karte erkannt wird.
Wer kann mir behilflich sein!? - Ich liebe LINUX über alles, doch mit den technischen Dingen komme ich einfach nicht klar!

Gruß micha

inux:/home/micha # lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:09.0 Multimedia video controller: Integrated Telecom Express Inc Unknown device 8800 (rev 05)
00:09.1 Multimedia controller: Integrated Telecom Express Inc Unknown device 8801 (rev 05)
00:09.2 Multimedia controller: Integrated Telecom Express Inc Unknown device 8802 (rev 05)
00:09.4 Multimedia controller: Integrated Telecom Express Inc Unknown device 8804 (rev 05)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
linux:/home/micha #



Linux version 2.6.16.21-0.13-debug (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Mon Jul 17 17:22:44 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
No mptable found.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.2 present.
Using APIC driver default
ACPI: RSDP (v000 KT600 ) @ 0x000f6c50
ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 vga=0x31a resume=/dev/hda2 splash=0
Found and enabled local APIC!
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1494.288 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 507364k/524224k available (1829k kernel code, 16228k reserved, 1184k data, 200k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2993.66 BogoMIPS (lpj=5987337)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2446k freed
not found!
tbxface-0109 [02] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0005) - 616 Objects with 59 Devices 180 Methods 27 Regions
ACPI Namespace successfully loaded at root c048a2f0
ACPI: setting ELCR to 0200 (from 0e20)
evxfevnt-0091 [03] enable : Transition to ACPI mode successful
CPU0: AMD Sempron(tm) 2200+ stepping 01
SMP motherboard not detected.
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
evgpeblk-0941 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1037 [05] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 1 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:................................... .......................................
Initialized 27/27 Regions 18/18 Fields 18/18 Buffers 11/21 Packages (625 nodes)
Executing all Device _STA and_INI methods:.......................................... .....................
63 Devices found - executed 1 _STA, 2 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
spurious 8259A interrupt: IRQ7.
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
Setting up standard PCI resources
pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
pnp: 00:02: ioport range 0x5000-0x500f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e0000000-e1ffffff
PREFETCH window: d8000000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1154936946.960:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Bypassing VIA 8237 APIC De-Assert Message
vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 10240k, total 65536k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:c2c0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76045 bytes,<6>...found (1280x1024, 33692 bytes, v3).
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 7, 655360 bytes)
TCP bind hash table entries: 32768 (order: 7, 655360 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI wakeup devices:
SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 MC97 UAR1 UAR2 ECP1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 200k freed
Write protecting the kernel read-only data: 389k
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
libata version 1.20 loaded.
sata_via 0000:00:0f.0: version 1.1
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
sata_via 0000:00:0f.0: routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0x9400 ctl 0x9802 bmdma 0xA400 irq 11
ata2: SATA max UDMA/133 cmd 0x9C00 ctl 0xA002 bmdma 0xA408 irq 11
ata1: SATA link down (SStatus 0)
scsi0 : sata_via
ata2: SATA link down (SStatus 0)
scsi1 : sata_via
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 10
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xac00-0xac07, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xac08-0xac0f, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: Maxtor 4D040H2, ATA DISK drive
hda: IRQ probe failed (0xfffff4fa)
hdb: SAMSUNG SP0411N, ATA DISK drive
hdb: IRQ probe failed (0xfffff4fa)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdb: max request size: 512KiB
hdb: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb2 < hdb5 >
Probing IDE interface ide1...
hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
hdd: PHILIPS DVDR1648P1, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (40 C)
ACPI: Fan [FAN] (on)
Attempting manual resume
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: warning: CONFIG_REISERFS_CHECK is set ON
ReiserFS: hda1: warning: - it is slow mode for debugging.
ReiserFS: hda1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: journal-1153: found in header: first_unflushed_offset 2913, last_flushed_trans_id 47680
ReiserFS: hda1: journal-1206: Starting replay from offset 204788335643489, trans_id 3743136116
ReiserFS: hda1: journal-1299: Setting newest_mount_id to 33
reiserfs: disabling flush barriers on hda1
ReiserFS: hda1: Using r5 hash to sort names
Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1 across:1052248k
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 11, io mem 0xe6001000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.21-0.13-debug ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
usb usb1: configuration #1 chosen from 1 choice
USB Universal Host Controller Interface driver v2.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
8139too Fast Ethernet driver 0.9.27
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 10, io base 0x0000b000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.21-0.13-debug uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 10, io base 0x0000b400
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.21-0.13-debug uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
usb 1-3: new high speed USB device using ehci_hcd and address 3
uhci_hcd 0000:00:10.2: irq 11, io base 0x0000b800
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16.21-0.13-debug uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
dvb_pll: module not supported by Novell, setting U taint flag.
ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 11, io base 0x0000bc00
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.16.21-0.13-debug uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xe14b6000, 00:30:84:3f:15:1d, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
eth1: VIA Rhine II at 0x1c800, 00:11:5b:52:29:01, IRQ 10.
eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=5 option
and report if it works on your machine.
For more details, read ALSA-Configuration.txt.
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
cx22702: module not supported by Novell, setting U taint flag.
lgdt330x: module not supported by Novell, setting U taint flag.
cx24123: module not supported by Novell, setting U taint flag.
nxt200x: module not supported by Novell, setting U taint flag.
dvb_core: module not supported by Novell, setting U taint flag.
video_buf_dvb: module not supported by Novell, setting U taint flag.
cx2388x v4l2 driver version 0.0.5 loaded
or51132: module not supported by Novell, setting U taint flag.
cx2388x alsa driver version 0.0.5 loaded
mt352: module not supported by Novell, setting U taint flag.
cx88_vp3054_i2c: module not supported by Novell, setting U taint flag.
cx88_dvb: module not supported by Novell, setting U taint flag.
cx2388x dvb driver version 0.0.5 loaded
ehci_hcd 0000:00:10.4: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
CORE cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-T DVB-T [card=18,insmod option]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: cx88[0] passed test.
tveeprom 0-0050: Hauppauge model 92001, rev B1B1, serial# 205435
tveeprom 0-0050: MAC address is 00-0D-FE-03-22-7B
tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 0-0050: audio processor is CX883 (idx 32)
tveeprom 0-0050: decoder processor is CX883 (idx 22)
tveeprom 0-0050: has no radio, has IR remote
cx88[0]: hauppauge eeprom: model=92001
input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input1
cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 11, latency: 32, mmio: 0xe2000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff)
set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00)
set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff)
set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed]
ACPI: PCI Interrupt 0000:00:09.2[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
cx88[0]/2: found at 0000:00:09.2, rev: 5, irq: 11, latency: 32, mmio: 0xe4000000
cx88[0]/2: cx2388x based dvb card
cx22702_readreg: readreg error (ret == -121)
cx88[0]: frontend initialization failed
cx88[0]/2: cx8802_stop_dma
cx88-dvb: probe of 0000:00:09.2 failed with error -1
cx2388x blackbird driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:00:09.1[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
usb 1-3: new device found, idVendor=067b, idProduct=2501
usb 1-3: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: USB-USB Bridge Cable 2.0
usb 1-3: Manufacturer: Prolific Technology Inc.
usb 1-3: SerialNumber: 30E2
usb 1-3: configuration #1 chosen from 1 choice
usb 2-2: new full speed USB device using uhci_hcd and address 2
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
dm-netlink version 0.0.2 loaded
usb 2-2: new device found, idVendor=0dc6, idProduct=5000
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Keyboard + 2P Hub
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: new device found, idVendor=046d, idProduct=c03d
usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB-PS/2 Optical Mouse
usb 3-2: Manufacturer: Logitech
usb 3-2: configuration #1 chosen from 1 choice
usb 2-2.1: new full speed USB device using uhci_hcd and address 3
usb 2-2.1: new device found, idVendor=0dc6, idProduct=5000
usb 2-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.1: Product: USB Keyboard + 2P Hub
usb 2-2.1: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2
input: USB Keyboard + 2P Hub as /class/input/input3
input: USB HID v1.10 Keyboard [USB Keyboard + 2P Hub] on usb-0000:00:10.0-2.1
input: USB Keyboard + 2P Hub as /class/input/input4
input: USB HID v1.10 Device [USB Keyboard + 2P Hub] on usb-0000:00:10.0-2.1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
loop: loaded (max 8 devices)
ReiserFS: hdb5: found reiserfs format "3.6" with standard journal
ReiserFS: hdb5: warning: CONFIG_REISERFS_CHECK is set ON
ReiserFS: hdb5: warning: - it is slow mode for debugging.
ReiserFS: hdb5: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hdb5: journal params: device hdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb5: checking transaction log (hdb5)
ReiserFS: hdb5: journal-1153: found in header: first_unflushed_offset 8168, last_flushed_trans_id 16288
ReiserFS: hdb5: journal-1206: Starting replay from offset 69960722292712, trans_id 3222445240
ReiserFS: hdb5: journal-1299: Setting newest_mount_id to 79
ReiserFS: hdb5: Using r5 hash to sort names
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1154936974.657:2): AppArmor (version 2.0-19.43r6320) initialized

NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4095 buckets, 32760 max) - 216 bytes per conntrack
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 17
NET: Registered protocol family 24
ppp0 renamed to dsl0
powernow-k8: Processor cpuid 681 not supported
get_control id=0x980900 reg=0x310110 val=0x80 (mask 0xff)
get_control id=0x980903 reg=0x310118 val=0x80 (mask 0xff)
get_control id=0x980901 reg=0x310110 val=0x3f (mask 0xff00)
get_control id=0x980902 reg=0x310114 val=0x7f (mask 0xff)
set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff)
set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00)
set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff)
get_control id=0x980900 reg=0x310110 val=0x80 (mask 0xff)
get_control id=0x980903 reg=0x310118 val=0x80 (mask 0xff)
get_control id=0x980901 reg=0x310110 val=0x3f (mask 0xff00)
get_control id=0x980902 reg=0x310114 val=0x7f (mask 0xff)
get_control id=0x980900 reg=0x310110 val=0x80 (mask 0xff)
get_control id=0x980903 reg=0x310118 val=0x80 (mask 0xff)
get_control id=0x980901 reg=0x310110 val=0x3f (mask 0xff00)
get_control id=0x980902 reg=0x310114 val=0x7f (mask 0xff)
set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff)
set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00)
set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff)
get_control id=0x980900 reg=0x310110 val=0x80 (mask 0xff)
get_control id=0x980903 reg=0x310118 val=0x80 (mask 0xff)
get_control id=0x980901 reg=0x310110 val=0x3f (mask 0xff00)
get_control id=0x980902 reg=0x310114 val=0x7f (mask 0xff)
eth0: no IPv6 routers present
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
SFW2-INext-DROP-DEFLT IN=dsl0 OUT= MAC= SRC=202.97.238.197 DST=84.141.209.222 LEN=486 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=33401 DPT=1026 LEN=466
SFW2-INext-DROP-DEFLT IN=dsl0 OUT= MAC= SRC=221.209.110.50 DST=84.141.209.222 LEN=485 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=UDP SPT=56920 DPT=1026 LEN=465
SFW2-INext-DROP-DEFLT IN=dsl0 OUT= MAC= SRC=221.209.110.50 DST=84.141.209.222 LEN=485 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=UDP SPT=56920 DPT=1027 LEN=465
ALSA sound/pci/via82xx.c:810: invalid via82xx_cur_ptr (2), using last valid pointer
ALSA sound/pci/via82xx.c:810: invalid via82xx_cur_ptr (2), using last valid pointer
ALSA sound/pci/via82xx.c:810: invalid via82xx_cur_ptr (2), using last valid pointer
ALSA sound/pci/via82xx.c:810: invalid via82xx_cur_ptr (2), using last valid pointer
ALSA sound/pci/via82xx.c:810: invalid via82xx_cur_ptr (2), using last valid pointer
ALSA sound/pci/via82xx.c:810: invalid via82xx_cur_ptr (2), using last valid pointer
ALSA sound/pci/via82xx.c:810: invalid via82xx_cur_ptr (2), using last valid pointer
ALSA sound/pci/via82xx.c:810: invalid via82xx_cur_ptr (2), using last valid pointer
SFW2-INext-DROP-DEFLT IN=dsl0 OUT= MAC= SRC=221.208.208.99 DST=84.141.209.222 LEN=485 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=UDP SPT=53671 DPT=1026 LEN=465
micha@linux:~>