WLAN Karte wird nicht erkannt
Hallo Linuxforen user,
vielleicht fällt euch ja was ein bei meinem Problem den ich sehen (eigentlich) keine Fehler oder was ich Falsch gemacht haben könnte. Ich habe mir mir im tuxhardware shop diese Karte gekaufe: „WLAN Allnet ALL0281 54 Mbit/s WLAN PCI-Karte“
Alles wunderbar habe ich mir gedacht, tuxhardware hat auch ein kleines HOWTO auf ihrer seite. Dort steh das mal sich einen Kernel backen muss mit diesen Optionen:
Dieses hat mich zu meinen ersten Problem gebracht, da ich noch nie einen Kernel gebacken haben. Aber nach par HOWTOs ist mir dieses gut gelungen und ich habe mir den Kernel: 2.6.14.3 zurecht gemacht. Mit dieses gebootet und dann eingestellt das bei jedem booten diese Module geladen werden:Code:Device Drivers ---> Networking support ---> Wireless LAN (non-hamradio) ---> [*] Wireless LAN drivers (non-hamradio) & Wireless Extensions
alles wunderbar. Dann habe ich mir den Treiber: Madwifi runter geladen von der Homepage:Code:wlan ath_hal ath_pci
http://madwifi.org/wiki/UserDocs/GettingMadwifi
und mit make und make install kompeliert. Dieses gab auch keine Fehlermeldung.
Nun dachte ich mir eigentlich sollte das alles ein. Leider wenn ich iwconfig starte bekomme ich nur:
Code:eth0 no wireless extensions. lo no wireless extensions. wifi0 no wireless extensions. sit0 no wireless extensions. ppp0 no wireless extensions.
unter
cat /proc/modules sind die Module auch geladen:
Code:ppp_deflate 4864 0 - Live 0xe0a7f000 zlib_deflate 22552 1 ppp_deflate, Live 0xe0a92000 zlib_inflate 17664 1 ppp_deflate, Live 0xe0a85000 bsd_comp 5632 0 - Live 0xe0a71000 ppp_async 9472 1 - Live 0xe0a1c000 crc_ccitt 2048 1 ppp_async, Live 0xe098d000 ppp_generic 21012 7 ppp_deflate,bsd_comp,ppp_async, Live 0xe0a41000 slhc 6400 1 ppp_generic, Live 0xe09f0000 af_packet 17416 4 - Live 0xe0a48000 ipv6 226624 21 - Live 0xe0ab5000 parport_pc 32324 0 - Live 0xe0a68000 parport 33480 1 parport_pc, Live 0xe0a5e000 floppy 56164 0 - Live 0xe0a4f000 i2c_i801 8076 0 - Live 0xe09ed000 i2c_core 17664 1 i2c_i801, Live 0xe0a00000 usbhid 29316 0 - Live 0xe0a13000 uhci_hcd 29840 0 - Live 0xe0a0a000 usbcore 105472 3 usbhid,uhci_hcd, Live 0xe0a20000 snd_ens1371 18980 1 - Live 0xe09fa000 snd_rawmidi 20000 1 snd_ens1371, Live 0xe09f4000 snd_seq_device 7052 1 snd_rawmidi, Live 0xe098f000 snd_ac97_codec 90876 1 snd_ens1371, Live 0xe09b3000 snd_pcm_oss 47648 0 - Live 0xe09e0000 snd_mixer_oss 16768 2 snd_pcm_oss, Live 0xe08e4000 snd_pcm 78468 3 snd_ens1371,snd_ac97_codec,snd_pcm_oss, Live 0xe09cb000 snd_timer 20868 1 snd_pcm, Live 0xe0993000 snd 44132 8 snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,sn d_mixer_oss,snd_pcm,snd_timer, Live 0xe09a7000 soundcore 7520 2 snd, Live 0xe080d000 snd_page_alloc 8456 1 snd_pcm, Live 0xe0971000 snd_ac97_bus 2048 1 snd_ac97_codec, Live 0xe08e2000 piix 9348 0 [permanent], Live 0xe095b000 nls_iso8859_1 4096 1 - Live 0xe081b000 nls_cp437 5760 1 - Live 0xe0818000 vfat 11008 1 - Live 0xe08de000 fat 45468 1 vfat, Live 0xe099a000 nls_base 6528 4 nls_iso8859_1,nls_cp437,vfat,fat, Live 0xe0815000 ath_pci 85920 0 - Live 0xe0975000 ath_rate_sample 11648 1 ath_pci, Live 0xe0804000 ath_hal 196048 3 ath_pci,ath_rate_sample, Live 0xe08fe000 wlan 171996 3 ath_pci,ath_rate_sample, Live 0xe0930000 ide_cd 36612 0 - Live 0xe08f4000 cdrom 36256 1 ide_cd, Live 0xe08ea000 unix 23568 74 - Live 0xe081d00
und unter dmesg
schaut auch alles ok aus:
Code:wlan: 0.8.4.2 (Atheros/multi-bss) ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.16.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, DFS) ath_rate_sample: 1.2 ath_pci: 0.9.4.5 (Atheros/multi-bss) ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 18 wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 5 4Mbps wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 5.9 phy 4.3 radio 4.6 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0xfbfe0000, irq=18
Auch unter :
make && make install von den madwifi-n Treibern sehe ich keinen Fehler:
****up:/home/zyon/madwifi-n# make && make install
Code:Checking requirements... ok. Checking kernel configuration... ok. mkdir -p ./symbols for i in ./ath_hal ./net80211 ath_rate/sample ./ath ./tools ; do \ make -C $i || exit 1; \ done make[1]: Entering directory `/home/zyon/madwifi-n/ath_hal' cp -f ./../hal/public/i386-elf.opt_ah.h opt_ah.h cp -f ./../hal/linux/ah_osdep.c ah_osdep.c /usr/bin/uudecode ./../hal/public/i386-elf.hal.o.uu make -C /usr/src/linux-2.6.14.3 SUBDIRS=/home/zyon/madwifi-n/ath_hal MODVERDIR=/home/zyo n/madwifi-n/ath_hal/../symbols modules make[2]: Entering directory `/usr/src/linux-2.6.14.3' CC [M] /home/zyon/madwifi-n/ath_hal/ah_osdep.o LD [M] /home/zyon/madwifi-n/ath_hal/ath_hal.o Building modules, stage 2. MODPOST CC /home/zyon/madwifi-n/ath_hal/ath_hal.mod.o LD [M] /home/zyon/madwifi-n/ath_hal/ath_hal.ko make[2]: Leaving directory `/usr/src/linux-2.6.14.3' make[1]: Leaving directory `/home/zyon/madwifi-n/ath_hal' make[1]: Entering directory `/home/zyon/madwifi-n/net80211' make -C /usr/src/linux-2.6.14.3 SUBDIRS=/home/zyon/madwifi-n/net80211 MODVERDIR=/home/zy on/madwifi-n/net80211/../symbols modules make[2]: Entering directory `/usr/src/linux-2.6.14.3' CC [M] /home/zyon/madwifi-n/net80211/if_media.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_beacon.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_crypto.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_crypto_none.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_input.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_node.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_output.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_power.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_proto.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_scan.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_wireless.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_linux.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_monitor.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_acl.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_crypto_ccmp.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_scan_ap.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_scan_sta.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_crypto_tkip.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_crypto_wep.o CC [M] /home/zyon/madwifi-n/net80211/ieee80211_xauth.o LD [M] /home/zyon/madwifi-n/net80211/wlan.o LD [M] /home/zyon/madwifi-n/net80211/wlan_wep.o LD [M] /home/zyon/madwifi-n/net80211/wlan_tkip.o LD [M] /home/zyon/madwifi-n/net80211/wlan_ccmp.o LD [M] /home/zyon/madwifi-n/net80211/wlan_acl.o LD [M] /home/zyon/madwifi-n/net80211/wlan_xauth.o LD [M] /home/zyon/madwifi-n/net80211/wlan_scan_sta.o LD [M] /home/zyon/madwifi-n/net80211/wlan_scan_ap.o Building modules, stage 2. MODPOST CC /home/zyon/madwifi-n/net80211/wlan.mod.o LD [M] /home/zyon/madwifi-n/net80211/wlan.ko CC /home/zyon/madwifi-n/net80211/wlan_acl.mod.o LD [M] /home/zyon/madwifi-n/net80211/wlan_acl.ko CC /home/zyon/madwifi-n/net80211/wlan_ccmp.mod.o LD [M] /home/zyon/madwifi-n/net80211/wlan_ccmp.ko CC /home/zyon/madwifi-n/net80211/wlan_scan_ap.mod.o LD [M] /home/zyon/madwifi-n/net80211/wlan_scan_ap.ko CC /home/zyon/madwifi-n/net80211/wlan_scan_sta.mod.o LD [M] /home/zyon/madwifi-n/net80211/wlan_scan_sta.ko CC /home/zyon/madwifi-n/net80211/wlan_tkip.mod.o LD [M] /home/zyon/madwifi-n/net80211/wlan_tkip.ko CC /home/zyon/madwifi-n/net80211/wlan_wep.mod.o LD [M] /home/zyon/madwifi-n/net80211/wlan_wep.ko CC /home/zyon/madwifi-n/net80211/wlan_xauth.mod.o LD [M] /home/zyon/madwifi-n/net80211/wlan_xauth.ko make[2]: Leaving directory `/usr/src/linux-2.6.14.3' make[1]: Leaving directory `/home/zyon/madwifi-n/net80211' make[1]: Entering directory `/home/zyon/madwifi-n/ath_rate/sample' make -C /usr/src/linux-2.6.14.3 SUBDIRS=/home/zyon/madwifi-n/ath_rate/sample MODVERDIR=/home/zyon/m adwifi-n/ath_rate/sample/../../symbols modules make[2]: Entering directory `/usr/src/linux-2.6.14.3' CC [M] /home/zyon/madwifi-n/ath_rate/sample/sample.o LD [M] /home/zyon/madwifi-n/ath_rate/sample/ath_rate_sample.o Building modules, stage 2. MODPOST CC /home/zyon/madwifi-n/ath_rate/sample/ath_rate_sample.mod.o LD [M] /home/zyon/madwifi-n/ath_rate/sample/ath_rate_sample.ko make[2]: Leaving directory `/usr/src/linux-2.6.14.3' make[1]: Leaving directory `/home/zyon/madwifi-n/ath_rate/sample' make[1]: Entering directory `/home/zyon/madwifi-n/ath' make -C /usr/src/linux-2.6.14.3 SUBDIRS=/home/zyon/madwifi-n/ath MODVERDIR=/home/zyon/madwifi-n/ath /../symbols modules make[2]: Entering directory `/usr/src/linux-2.6.14.3' CC [M] /home/zyon/madwifi-n/ath/if_ath.o CC [M] /home/zyon/madwifi-n/ath/if_ath_pci.o LD [M] /home/zyon/madwifi-n/ath/ath_pci.o Building modules, stage 2. MODPOST CC /home/zyon/madwifi-n/ath/ath_pci.mod.o LD [M] /home/zyon/madwifi-n/ath/ath_pci.ko make[2]: Leaving directory `/usr/src/linux-2.6.14.3' make[1]: Leaving directory `/home/zyon/madwifi-n/ath' make[1]: Entering directory `/home/zyon/madwifi-n/tools' gcc -o athstats -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. -I../ath athstats.c athstats.c: In function 'main': athstats.c:346: warning: 'sigblock' is deprecated (declared at /usr/include/signal.h:181) athstats.c:348: warning: 'sigpause' is deprecated (declared at /usr/include/signal.h:158) athstats.c:349: warning: 'sigsetmask' is deprecated (declared at /usr/include/signal.h:184) gcc -o 80211stats -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. 80211stats.c gcc -o athkey -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. athkey.c gcc -o athchans -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. athchans.c gcc -o athctrl -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. athctrl.c gcc -o athdebug -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. athdebug.c gcc -o 80211debug -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. 80211debug.c gcc -o wlanconfig -g -O2 -Wall -include ../include/compat.h -I. -I../hal -I.. wlanconfig.c make[1]: Leaving directory `/home/zyon/madwifi-n/tools' sh scripts/find-madwifi-modules.sh /lib/modules/2.6.14.3 WARNING: It seems that there are modules left from previous MadWifi installations. You should consider removing them before you continue, or else you might experience problems during operation. Remove old modules? r for i in ./ath_hal ./net80211 ath_rate/sample ./ath ./tools ; do \ make -C $i install || exit 1; \ done make[1]: Entering directory `/home/zyon/madwifi-n/ath_hal' make -C /usr/src/linux-2.6.14.3 SUBDIRS=/home/zyon/madwifi-n/ath_hal MODVERDIR=/home/zyon/madwifi-n/ath_hal/../symbols modules make[2]: Entering directory `/usr/src/linux-2.6.14.3' Building modules, stage 2. MODPOST make[2]: Leaving directory `/usr/src/linux-2.6.14.3' test -d //lib/modules/2.6.14.3/net || mkdir -p //lib/modules/2.6.14.3/net strip -S ath_hal.ko cp ath_hal.ko //lib/modules/2.6.14.3/net make[1]: Leaving directory `/home/zyon/madwifi-n/ath_hal' make[1]: Entering directory `/home/zyon/madwifi-n/net80211' make -C /usr/src/linux-2.6.14.3 SUBDIRS=/home/zyon/madwifi-n/net80211 MODVERDIR=/home/zyon/madwifi-n/net80211/../symbols modules make[2]: Entering directory `/usr/src/linux-2.6.14.3' Building modules, stage 2. MODPOST make[2]: Leaving directory `/usr/src/linux-2.6.14.3' test -d //lib/modules/2.6.14.3/net || mkdir -p //lib/modules/2.6.14.3/net for i in wlan.o wlan_wep.o wlan_tkip.o wlan_ccmp.o wlan_acl.o wlan_xauth.o wlan_scan_sta.o wlan_scan_ap.o; do \ f=`basename $i .o`; \ strip -S $f.ko; \ cp $f.ko //lib/modules/2.6.14.3/net; \ done make[1]: Leaving directory `/home/zyon/madwifi-n/net80211' make[1]: Entering directory `/home/zyon/madwifi-n/ath_rate/sample' make -C /usr/src/linux-2.6.14.3 SUBDIRS=/home/zyon/madwifi-n/ath_rate/sample MODVERDIR=/home/zyon/madwifi-n/ath_rate/sample/../../symbols modules make[2]: Entering directory `/usr/src/linux-2.6.14.3' Building modules, stage 2. MODPOST make[2]: Leaving directory `/usr/src/linux-2.6.14.3' test -d //lib/modules/2.6.14.3/net || mkdir -p //lib/modules/2.6.14.3/net strip -S ath_rate_sample.ko cp ath_rate_sample.ko //lib/modules/2.6.14.3/net make[1]: Leaving directory `/home/zyon/madwifi-n/ath_rate/sample' make[1]: Entering directory `/home/zyon/madwifi-n/ath' make -C /usr/src/linux-2.6.14.3 SUBDIRS=/home/zyon/madwifi-n/ath MODVERDIR=/home/zyon/madwifi-n/ath/../symbols modules make[2]: Entering directory `/usr/src/linux-2.6.14.3' Building modules, stage 2. MODPOST make[2]: Leaving directory `/usr/src/linux-2.6.14.3' test -d //lib/modules/2.6.14.3/net || mkdir -p //lib/modules/2.6.14.3/net strip -S ath_pci.ko cp ath_pci.ko //lib/modules/2.6.14.3/net make[1]: Leaving directory `/home/zyon/madwifi-n/ath' make[1]: Entering directory `/home/zyon/madwifi-n/tools' sh ../scripts/find-madwifi-tools.sh /usr/local/bin /usr/local/man WARNING: It seems that there are tools left from previous MadWifi installations. You should consider removing them before you continue, or else you might experience problems during operation. Remove old tools? r install -d /usr/local/bin for i in athstats 80211stats athkey athchans athctrl athdebug 80211debug wlanconfig; do \ install $i /usr/local/bin/$i; \ strip /usr/local/bin/$i; \ done install -d /usr/local/man/man8 install ./man/* /usr/local/man/man8 echo "DESTDIR=" > ./install.log echo "BINDIR=/usr/local/bin" >> ./install.log echo "MANDIR=/usr/local/man" >> ./install.log make[1]: Leaving directory `/home/zyon/madwifi-n/tools' (export MODULEPATH=/lib/modules/2.6.14.3/net; depmod -ae) echo "KERNELRELEASE=2.6.14.3" > ./install.log echo "DESTDIR=" >> ./install.log
Ich weiß echt nicht mehr was ich machen soll und wo ich noch nach Fehlern suchen kann. Ich würde mich sehr freuen wenn jemand von dieser großem Community eine Ahnung hätte was ich noch machen kann
Danke
Zy0n
P.S. die Wireless-Tools natürlich installiert.
Distribution: Debian SID
Kernel: 2.6.14.3
Zitieren
Zitat von MiGo
herdamit 
Lesezeichen