Debian Sarge 3.1 - USB Hardware

**basti007** · 07.11.05, 17:57

Hi,
ich ein Problem mit meiner externen USB 2.0 Festplatte. Schalte ich sie ein erhalte ich die unten stehende Fehlermeldung und keine der per USB angeschlossenen Hardwareteile funzt mehr. Das betrifft im speziellen meine USB Tastatur, die über eine USB Hub verfügt über den meine Maus angeschlossen ist.
An der Hardware kann es übrigens nicht liegen, dass das Problem unter SuSE Linux sowie Knoppix nicht besteht!

Über jede Hilfe wäre ich sehr dankbar.

Fehlermeldung auf der Konsole:

syslogd@meise...
meise223 kernel: Disabling IRQ #5

Auszug aus syslog:
Nov 7 18:17:01 meise223 /USR/SBIN/CRON[6685]: (root) CMD ( run-parts --report /etc/cron.hourly)
Nov 7 18:17:45 meise223 kernel: irq 5: nobody cared!
Nov 7 18:17:45 meise223 kernel: [__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90
Nov 7 18:17:45 meise223 kernel: [note_interrupt+112/176] note_interrupt+0x70/0xb0
Nov 7 18:17:45 meise223 kernel: [do_IRQ+288/304] do_IRQ+0x120/0x130
Nov 7 18:17:45 meise223 kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
Nov 7 18:17:45 meise223 kernel: [__do_softirq+46/128] __do_softirq+0x2e/0x80
Nov 7 18:17:45 meise223 kernel: [do_softirq+39/48] do_softirq+0x27/0x30
Nov 7 18:17:45 meise223 kernel: [do_IRQ+251/304] do_IRQ+0xfb/0x130
Nov 7 18:17:45 meise223 kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
Nov 7 18:17:45 meise223 kernel: [pvc_info+91/256] pvc_info+0x5b/0x100
Nov 7 18:17:45 meise223 kernel: [default_idle+35/64] default_idle+0x23/0x40
Nov 7 18:17:45 meise223 kernel: [cpu_idle+52/64] cpu_idle+0x34/0x40
Nov 7 18:17:45 meise223 kernel: [start_kernel+424/496] start_kernel+0x1a8/0x1f0
Nov 7 18:17:45 meise223 kernel: [unknown_bootoption+0/352] unknown_bootoption+0x0/0x160
Nov 7 18:17:45 meise223 kernel: handlers:
Nov 7 18:17:45 meise223 kernel: [__crc_sk_stream_mem_schedule+1380801/1457199] (yenta_interrupt+0x0/0x40 [yenta_socket])
Nov 7 18:17:45 meise223 kernel: [__crc_xfrm_get_type+108194/3356969] (ohci_irq_handler+0x0/0x840 [ohci1394])
Nov 7 18:17:45 meise223 kernel: [__crc_xfrm_get_type+342226/3356969] (i810_interrupt+0x0/0xc0 [i810_audio])
Nov 7 18:17:45 meise223 kernel: [__crc_xfrm_get_type+545890/3356969] (usb_hcd_irq+0x0/0x70 [usbcore])
Nov 7 18:17:45 meise223 kernel: [__crc_xfrm_get_type+1528514/3356969] (snd_intel8x0_interrupt+0x0/0x230 [snd_intel8x0m])
Nov 7 18:17:45 meise223 kernel: Disabling IRQ #5

**torsten_boese** · 07.11.05, 18:46

poste mal deine ausgabe bei: lsusb lspci und lsmod

**basti007** · 07.11.05, 19:14

lsusb:
us 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 046d:c03e Logitech, Inc.
Bus 002 Device 004: ID 0dc6:5000 Precision Squared Technology Corp.
Bus 002 Device 003: ID 04f9:0169 Brother Industries, Ltd
Bus 002 Device 002: ID 0dc6:5000 Precision Squared Technology Corp.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

lsmod:

Module Size Used by
ipv6 264740 10
ds 18756 4
parport_pc 36900 0
parport 41800 1 parport_pc
irtty_sir 9152 0
sir_dev 19244 1 irtty_sir
irda 197120 2 irtty_sir,sir_dev
crc_ccitt 2144 1 irda
pcspkr 3592 0
8139cp 20672 0
snd_intel8x0m 20264 0
snd_intel8x0 36460 0
snd_ac97_codec 69988 2 snd_intel8x0m,snd_intel8x0
snd_pcm 98728 2 snd_intel8x0m,snd_intel8x0
snd_timer 25732 1 snd_pcm
snd_page_alloc 11752 3 snd_intel8x0m,snd_intel8x0,snd_pcm
gameport 4704 1 snd_intel8x0
snd_mpu401_uart 7968 1 snd_intel8x0
snd_rawmidi 25124 1 snd_mpu401_uart
snd_seq_device 8200 1 snd_rawmidi
snd 57156 8 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm, snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_devi ce
hw_random 5460 0
shpchp 101900 0
pciehp 99020 0
pci_hotplug 34640 2 shpchp,pciehp
intel_agp 22816 1
agpgart 34664 1 intel_agp
usbhid 32224 0
usblp 13088 0
usb_storage 69056 0
ehci_hcd 32004 0
eth1394 21576 0
uhci_hcd 33136 0
usbcore 119012 7 usbhid,usblp,usb_storage,ehci_hcd,uhci_hcd
i810_audio 37588 0
ac97_codec 18956 1 i810_audio
soundcore 10336 2 snd,i810_audio
8139too 26112 0
mii 5120 2 8139cp,8139too
ohci1394 35492 0
yenta_socket 21728 0
pcmcia_core 70868 2 ds,yenta_socket
capability 4520 0
commoncap 7232 1 capability
tsdev 7392 0
mousedev 10476 1
joydev 9984 0
evdev 9600 0
sr_mod 17316 0
sd_mod 21728 0
sbp2 24392 0
scsi_mod 125228 4 usb_storage,sr_mod,sd_mod,sbp2
ieee1394 111512 3 eth1394,ohci1394,sbp2
psmouse 20360 0
ide_cd 42656 0
cdrom 40732 2 sr_mod,ide_cd
genrtc 9588 0
ext3 127240 2
jbd 62616 1 ext3
mbcache 9348 1 ext3
ide_generic 1408 0
piix 13440 1
ide_disk 19296 4
ide_core 139940 5 usb_storage,ide_cd,ide_generic,piix,ide_disk
unix 28756 90
font 8320 0
vesafb 6656 0
cfbcopyarea 3872 1 vesafb
cfbimgblt 3040 1 vesafb
cfbfillrect 3776 1 vesafb

lspci:
0:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 21)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 21)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:02:04.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
0000:02:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
0000:02:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
0000:02:05.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04)

**torsten_boese** · 07.11.05, 21:16

sieht eigentlich ganz gut aus,

gib mal dmesg ein und poste das mal..

und deine /var/log/messages seid dem start..

auf jeden Fall scheints du einen IRQ conflict zu haben ...

mal nen anderen usb-port probieren. Also nicht am Hub sondern am Rechner. Und mal das gerät ohne hub direckt in den usb-port. Wenn du pci karten drin hast mal den steckplatz tauschen - kann sein das der Steckplatz mit dem USB controller collidiert...

**basti007** · 08.11.05, 09:06

die Ausgaben poste ich später... bin gerad mit Win unterwegs...

bei meinem Rechner handelt es sich um einen ASUS Notebook... keine PCI Karten! Das Notebook verfügt über einen internen USB 4er Hub an dem der Drucker, die Tastatur(und darüber die Maus) und die besagte Festplatte hängt.

bis später

**basti007** · 08.11.05, 16:41

var/log/messages:

Nov 8 17:28:13 meise223 syslogd 1.4.1#17: restart.
Nov 8 17:28:13 meise223 kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
Nov 8 17:28:13 meise223 kernel: Inspecting /boot/System.map-2.6.8-2-686
Nov 8 17:28:13 meise223 kernel: Loaded 27390 symbols from /boot/System.map-2.6.8-2-686.
Nov 8 17:28:13 meise223 kernel: Symbols match kernel version 2.6.8.
Nov 8 17:28:13 meise223 kernel: No module symbols loaded - kernel modules not enabled.
Nov 8 17:28:13 meise223 kernel: Linux version 2.6.8-2-686 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Thu May 19 17:53:30 JST 2005
Nov 8 17:28:13 meise223 kernel: BIOS-provided physical RAM map:
Nov 8 17:28:13 meise223 kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 8 17:28:13 meise223 kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 8 17:28:13 meise223 kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Nov 8 17:28:13 meise223 kernel: BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
Nov 8 17:28:13 meise223 kernel: BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
Nov 8 17:28:13 meise223 kernel: BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
Nov 8 17:28:13 meise223 kernel: 0MB HIGHMEM available.
Nov 8 17:28:13 meise223 kernel: 511MB LOWMEM available.
Nov 8 17:28:13 meise223 kernel: DMI 2.3 present.
Nov 8 17:28:13 meise223 kernel: ACPI: RSDP (v000 ACPIAM ) @ 0x000f5940
Nov 8 17:28:13 meise223 kernel: ACPI: RSDT (v001 A M I OEMRSDT 0x11000419 MSFT 0x00000097) @ 0x1ff40000
Nov 8 17:28:13 meise223 kernel: ACPI: FADT (v001 A M I OEMFACP 0x11000419 MSFT 0x00000097) @ 0x1ff40200
Nov 8 17:28:13 meise223 kernel: ACPI: OEMB (v001 A M I OEMBIOS 0x11000419 MSFT 0x00000097) @ 0x1ff50040
Nov 8 17:28:13 meise223 kernel: ACPI: DSDT (v001 0ABBN 0ABBN005 0x00000005 MSFT 0x0100000d) @ 0x00000000
Nov 8 17:28:13 meise223 kernel: ACPI: PM-Timer IO Port: 0x408
Nov 8 17:28:13 meise223 kernel: Built 1 zonelists
Nov 8 17:28:13 meise223 kernel: Kernel command line: root=/dev/hda6 ro
Nov 8 17:28:13 meise223 kernel: Found and enabled local APIC!
Nov 8 17:28:13 meise223 kernel: Initializing CPU#0
Nov 8 17:28:13 meise223 kernel: PID hash table entries: 2048 (order 11: 16384 bytes)
Nov 8 17:28:13 meise223 kernel: Detected 1600.422 MHz processor.
Nov 8 17:28:13 meise223 kernel: Using pmtmr for high-res timesource
Nov 8 17:28:13 meise223 kernel: Console: colour VGA+ 80x25
Nov 8 17:28:13 meise223 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 8 17:28:13 meise223 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 8 17:28:13 meise223 kernel: Memory: 510636k/523520k available (1551k kernel code, 12124k reserved, 690k data, 148k init, 0k highmem)
Nov 8 17:28:13 meise223 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 8 17:28:13 meise223 kernel: Calibrating delay loop... 3170.30 BogoMIPS
Nov 8 17:28:13 meise223 kernel: Security Scaffold v1.0.0 initialized
Nov 8 17:28:13 meise223 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 8 17:28:13 meise223 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 8 17:28:13 meise223 kernel: CPU: L2 cache: 2048K
Nov 8 17:28:13 meise223 kernel: Intel machine check architecture supported.
Nov 8 17:28:13 meise223 kernel: Intel machine check reporting enabled on CPU#0.
Nov 8 17:28:13 meise223 kernel: CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
Nov 8 17:28:13 meise223 kernel: Enabling fast FPU save and restore... done.
Nov 8 17:28:13 meise223 kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 8 17:28:13 meise223 kernel: Checking 'hlt' instruction... OK.
Nov 8 17:28:13 meise223 kernel: enabled ExtINT on CPU#0
Nov 8 17:28:13 meise223 kernel: ESR value before enabling vector: 00000000
Nov 8 17:28:13 meise223 kernel: ESR value after enabling vector: 00000000
Nov 8 17:28:13 meise223 kernel: Using local APIC timer interrupts.
Nov 8 17:28:13 meise223 kernel: calibrating APIC timer ...
Nov 8 17:28:13 meise223 kernel: ..... CPU clock speed is 1599.0750 MHz.
Nov 8 17:28:13 meise223 kernel: ..... host bus clock speed is 99.0984 MHz.
Nov 8 17:28:13 meise223 kernel: checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Nov 8 17:28:13 meise223 kernel: Freeing initrd memory: 4556k freed
Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 16
Nov 8 17:28:13 meise223 kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
Nov 8 17:28:13 meise223 kernel: PCI: Using configuration type 1
Nov 8 17:28:13 meise223 kernel: mtrr: v2.0 (20020519)
Nov 8 17:28:13 meise223 kernel: ACPI: Subsystem revision 20040326
Nov 8 17:28:13 meise223 kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
Nov 8 17:28:13 meise223 kernel: ACPI: Interpreter enabled
Nov 8 17:28:13 meise223 kernel: ACPI: Using PIC for interrupt routing
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Nov 8 17:28:13 meise223 kernel: PCI: Probing PCI hardware (bus 00)
Nov 8 17:28:13 meise223 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Nov 8 17:28:13 meise223 kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov 8 17:28:13 meise223 kernel: ACPI: Embedded Controller [EC0] (gpe 28)
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *11 12)
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 12)
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 6 7 12)
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 12)
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 12) *0, disabled.
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 12) *0, disabled.
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 12) *0, disabled.
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 12)
Nov 8 17:28:13 meise223 kernel: ACPI: Power Resource [GFAN] (off)
Nov 8 17:28:13 meise223 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 8 17:28:13 meise223 kernel: PnPBIOS: Scanning system for PnP BIOS support...
Nov 8 17:28:13 meise223 kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00f3be0
Nov 8 17:28:13 meise223 kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x47ba, dseg 0xf0000
Nov 8 17:28:13 meise223 kernel: pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
Nov 8 17:28:13 meise223 kernel: pnp: 00:0a: ioport range 0xcf8-0xcff could not be reserved
Nov 8 17:28:13 meise223 kernel: PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
Nov 8 17:28:13 meise223 kernel: PCI: Using ACPI for IRQ routing
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 4 (level, low) -> IRQ 4
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 4 (level, low) -> IRQ 4
Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 4 (level, low) -> IRQ 4
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 4 (level, low) -> IRQ 4
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 11 (level, low) -> IRQ 11
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.2[C] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: VFS: Disk quotas dquot_6.5.1
Nov 8 17:28:13 meise223 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 8 17:28:13 meise223 kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Nov 8 17:28:13 meise223 kernel: devfs: boot_options: 0x0
Nov 8 17:28:13 meise223 kernel: Initializing Cryptographic API
Nov 8 17:28:13 meise223 kernel: isapnp: Scanning for PnP cards...
Nov 8 17:28:13 meise223 kernel: isapnp: No Plug & Play device found
Nov 8 17:28:13 meise223 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Nov 8 17:28:13 meise223 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Nov 8 17:28:13 meise223 kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
Nov 8 17:28:13 meise223 kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Nov 8 17:28:13 meise223 kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Nov 8 17:28:13 meise223 kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Nov 8 17:28:13 meise223 kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Nov 8 17:28:13 meise223 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 8 17:28:13 meise223 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 2
Nov 8 17:28:13 meise223 kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Nov 8 17:28:13 meise223 kernel: TCP: Hash tables configured (established 32768 bind 65536)
Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 8
Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 20
Nov 8 17:28:13 meise223 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov 8 17:28:13 meise223 kernel: RAMDISK: cramfs filesystem found at block 0
Nov 8 17:28:13 meise223 kernel: RAMDISK: Loading 4556 blocks [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^Hdone.
Nov 8 17:28:13 meise223 kernel: VFS: Mounted root (cramfs filesystem) readonly.
Nov 8 17:28:13 meise223 kernel: Freeing unused kernel memory: 148k freed
Nov 8 17:28:13 meise223 kernel: vesafb: probe of vesafb0 failed with error -6
Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 1
Nov 8 17:28:13 meise223 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 8 17:28:13 meise223 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 8 17:28:13 meise223 kernel: ICH4: IDE controller at PCI slot 0000:00:1f.1
Nov 8 17:28:13 meise223 kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 4 (level, low) -> IRQ 4
Nov 8 17:28:13 meise223 kernel: ICH4: chipset revision 3
Nov 8 17:28:13 meise223 kernel: ICH4: not 100%% native mode: will probe irqs later
Nov 8 17:28:13 meise223 kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda

MA, hdb

io
Nov 8 17:28:13 meise223 kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc

MA, hdd

io
Nov 8 17:28:13 meise223 kernel: hda: HTS424040M9AT00, ATA DISK drive
Nov 8 17:28:13 meise223 kernel: Using anticipatory io scheduler
Nov 8 17:28:13 meise223 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 8 17:28:13 meise223 kernel: hda: max request size: 1024KiB
Nov 8 17:28:13 meise223 kernel: hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100)
Nov 8 17:28:13 meise223 kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
Nov 8 17:28:13 meise223 kernel: hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
Nov 8 17:28:13 meise223 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 8 17:28:13 meise223 kernel: kjournald starting. Commit interval 5 seconds
Nov 8 17:28:13 meise223 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 8 17:28:13 meise223 kernel: Adding 265032k swap on /dev/hda8. Priority:-1 extents:1
Nov 8 17:28:13 meise223 kernel: EXT3 FS on hda6, internal journal
Nov 8 17:28:13 meise223 kernel: Generic RTC Driver v1.07
Nov 8 17:28:13 meise223 kernel: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Nov 8 17:28:13 meise223 kernel: Uniform CD-ROM driver Revision: 3.20
Nov 8 17:28:13 meise223 kernel: Synaptics Touchpad, model: 1
Nov 8 17:28:13 meise223 kernel: Firmware: 5.9
Nov 8 17:28:13 meise223 kernel: 180 degree mounted touchpad
Nov 8 17:28:13 meise223 kernel: Sensor: 18
Nov 8 17:28:13 meise223 kernel: new absolute packet format
Nov 8 17:28:13 meise223 kernel: Touchpad has extended capability bits
Nov 8 17:28:13 meise223 kernel: -> four buttons
Nov 8 17:28:13 meise223 kernel: -> multifinger detection
Nov 8 17:28:13 meise223 kernel: -> palm detection
Nov 8 17:28:13 meise223 kernel: input: SynPS/2 Synaptics TouchPad on isa0060/serio4
Nov 8 17:28:13 meise223 kernel: SCSI subsystem initialized
Nov 8 17:28:13 meise223 kernel: sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Nov 8 17:28:13 meise223 kernel: mice: PS/2 mouse device common for all mice
Nov 8 17:28:13 meise223 kernel: ts: Compaq touchscreen protocol output
Nov 8 17:28:13 meise223 kernel: Capability LSM initialized
Nov 8 17:28:13 meise223 kernel: kjournald starting. Commit interval 5 seconds
Nov 8 17:28:13 meise223 kernel: EXT3 FS on hda7, internal journal
Nov 8 17:28:13 meise223 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 8 17:28:13 meise223 kernel: Linux Kernel Card Services
Nov 8 17:28:13 meise223 kernel: options: [pci] [cardbus] [pm]
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: Yenta: CardBus bridge found at 0000:02:05.0 [1043:1844]
Nov 8 17:28:13 meise223 kernel: Yenta: ISA IRQ mask 0x0488, PCI irq 5
Nov 8 17:28:13 meise223 kernel: Socket status: 30000006
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 11 (level, low) -> IRQ 11
Nov 8 17:28:13 meise223 kernel: Yenta: CardBus bridge found at 0000:02:05.1 [1043:1844]
Nov 8 17:28:13 meise223 kernel: Yenta: ISA IRQ mask 0x0488, PCI irq 11
Nov 8 17:28:13 meise223 kernel: Socket status: 30000006
Nov 8 17:28:13 meise223 kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.2[C] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ff9ff000-ff9ff7ff] Max Packet=[2048]
Nov 8 17:28:13 meise223 kernel: 8139too Fast Ethernet driver 0.9.27
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 4 (level, low) -> IRQ 4
Nov 8 17:28:13 meise223 kernel: eth0: RealTek RTL8139 at 0xd800, 00:11:d8:1c:1d:3d, IRQ 4
Nov 8 17:28:13 meise223 kernel: Intel 810 + AC97 Audio, version 1.01, 17:58:08 May 19 2005
Nov 8 17:28:13 meise223 kernel: PCI: Enabling device 0000:00:1f.5 (0001 -> 0003)
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: i810: Intel ICH4 found at IO 0x1100 and 0x1000, MEM 0xffaff800 and 0xffaff400, IRQ 5
Nov 8 17:28:13 meise223 kernel: i810: Intel ICH4 mmio at 0xe0994800 and 0xe09a0400
Nov 8 17:28:13 meise223 kernel: i810_audio: Primary codec has ID 0
Nov 8 17:28:13 meise223 kernel: i810_audio: Audio Controller supports 6 channels.
Nov 8 17:28:13 meise223 kernel: i810_audio: Defaulting to base 2 channel mode.
Nov 8 17:28:13 meise223 kernel: i810_audio: Resetting connection 0
Nov 8 17:28:13 meise223 kernel: i810_audio: Connection 0 with codec id 0
Nov 8 17:28:13 meise223 kernel: ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
Nov 8 17:28:13 meise223 kernel: i810_audio: AC'97 codec 0, new EID value = 0x05c7
Nov 8 17:28:13 meise223 kernel: i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver usbfs
Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver hub
Nov 8 17:28:13 meise223 kernel: USB Universal Host Controller Interface driver v2.2
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.0: irq 11, io base 0000e800
Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 8 17:28:13 meise223 kernel: hub 1-0:1.0: USB hub found
Nov 8 17:28:13 meise223 kernel: hub 1-0:1.0: 2 ports detected
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.1: irq 5, io base 0000e880
Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Nov 8 17:28:13 meise223 kernel: hub 2-0:1.0: USB hub found
Nov 8 17:28:13 meise223 kernel: hub 2-0:1.0: 2 ports detected
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 4 (level, low) -> IRQ 4
Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
Nov 8 17:28:13 meise223 kernel: ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.2: irq 4, io base 0000ec00
Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Nov 8 17:28:13 meise223 kernel: hub 3-0:1.0: USB hub found
Nov 8 17:28:13 meise223 kernel: hub 3-0:1.0: 2 ports detected
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
Nov 8 17:28:13 meise223 kernel: usb 2-1: new full speed USB device using address 2
Nov 8 17:28:13 meise223 kernel: hub 2-1:1.0: USB hub found
Nov 8 17:28:13 meise223 kernel: hub 2-1:1.0: 3 ports detected
Nov 8 17:28:13 meise223 kernel: usb 2-2: new full speed USB device using address 3
Nov 8 17:28:13 meise223 kernel: Initializing USB Mass Storage driver...
Nov 8 17:28:13 meise223 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Nov 8 17:28:13 meise223 kernel: Vendor: Brother Model: DCP-110C Rev: 1.00
Nov 8 17:28:13 meise223 kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 8 17:28:13 meise223 kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver usb-storage
Nov 8 17:28:13 meise223 kernel: USB Mass Storage support registered.
Nov 8 17:28:13 meise223 kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0169
Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver usblp
Nov 8 17:28:13 meise223 kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Nov 8 17:28:13 meise223 kernel: usb 2-1.1: new full speed USB device using address 4
Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver hiddev
Nov 8 17:28:13 meise223 kernel: ehci_hcd: probe of 0000:00:1d.7 failed with error -95
Nov 8 17:28:13 meise223 kernel: input: USB HID v1.10 Keyboard [USB Keyboard + 2P Hub] on usb-0000:00:1d.1-1.1
Nov 8 17:28:13 meise223 kernel: input: USB HID v1.10 Device [USB Keyboard + 2P Hub] on usb-0000:00:1d.1-1.1
Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver usbhid
Nov 8 17:28:13 meise223 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Nov 8 17:28:13 meise223 kernel: usb 2-1.2: new low speed USB device using address 5
Nov 8 17:28:13 meise223 kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1.2
Nov 8 17:28:13 meise223 kernel: Linux agpgart interface v0.100 (c) Dave Jones
Nov 8 17:28:13 meise223 kernel: agpgart: Detected an Intel 855PM Chipset.
Nov 8 17:28:13 meise223 kernel: agpgart: Maximum main memory to use for agp memory: 439M
Nov 8 17:28:13 meise223 kernel: agpgart: AGP aperture is 256M @ 0xe0000000
Nov 8 17:28:13 meise223 kernel: cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
Nov 8 17:28:13 meise223 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 8 17:28:13 meise223 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 8 17:28:13 meise223 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 8 17:28:13 meise223 kernel: hw_random hardware driver 1.0.0 loaded
Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
Nov 8 17:28:13 meise223 kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Nov 8 17:28:13 meise223 kernel: input: PC Speaker
Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 23
Nov 8 17:28:13 meise223 kernel: parport: PnPBIOS parport detected.
Nov 8 17:28:13 meise223 kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Nov 8 17:28:13 meise223 kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Nov 8 17:28:15 meise223 kernel: cs: IO port probe 0x0100-0x04ff: clean.
Nov 8 17:28:15 meise223 kernel: cs: IO port probe 0x0800-0x08ff: clean.
Nov 8 17:28:15 meise223 kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07
Nov 8 17:28:15 meise223 kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Nov 8 17:28:16 meise223 kernel: NET: Registered protocol family 10
Nov 8 17:28:16 meise223 kernel: Disabled Privacy Extensions on device c0300140(lo)
Nov 8 17:28:16 meise223 kernel: IPv6 over IPv4 tunneling driver
Nov 8 17:28:21 meise223 kernel: drivers/usb/input/hid-input.c: event field not found
Nov 8 17:28:21 meise223 kernel: drivers/usb/input/hid-input.c: event field not found
Nov 8 17:32:44 meise223 kernel: [__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90
Nov 8 17:32:44 meise223 kernel: [note_interrupt+112/176] note_interrupt+0x70/0xb0
Nov 8 17:32:44 meise223 kernel: [do_IRQ+288/304] do_IRQ+0x120/0x130
Nov 8 17:32:44 meise223 kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20

__________________________________________________ ____

dmesg:

> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 130880
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126784 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f5940
ACPI: RSDT (v001 A M I OEMRSDT 0x11000419 MSFT 0x00000097) @ 0x1ff40000
ACPI: FADT (v001 A M I OEMFACP 0x11000419 MSFT 0x00000097) @ 0x1ff40200
ACPI: OEMB (v001 A M I OEMBIOS 0x11000419 MSFT 0x00000097) @ 0x1ff50040
ACPI: DSDT (v001 0ABBN 0ABBN005 0x00000005 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
Built 1 zonelists
Kernel command line: root=/dev/hda6 ro
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1600.422 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 510636k/523520k available (1551k kernel code, 12124k reserved, 690k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3170.30 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1599.0750 MHz.
..... host bus clock speed is 99.0984 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4556k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 6 7 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 12)
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f3be0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x47ba, dseg 0xf0000
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0xcf8-0xcff could not be reserved
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:05.2[C] -> GSI 5 (level, low) -> IRQ 5
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4556 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 4 (level, low) -> IRQ 4
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda

MA, hdb

io
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc

MA, hdd

io
hda: HTS424040M9AT00, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 265032k swap on /dev/hda8. Priority:-1 extents:1
EXT3 FS on hda6, internal journal
Generic RTC Driver v1.07
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Synaptics Touchpad, model: 1
Firmware: 5.9
180 degree mounted touchpad
Sensor: 18
new absolute packet format
Touchpad has extended capability bits
-> four buttons
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
ieee1394: Initialized config rom entry `ip1394'
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
Capability LSM initialized
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5
Yenta: CardBus bridge found at 0000:02:05.0 [1043:1844]
Yenta: ISA IRQ mask 0x0488, PCI irq 5
Socket status: 30000006
ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:05.1 [1043:1844]
Yenta: ISA IRQ mask 0x0488, PCI irq 11
Socket status: 30000006
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:02:05.2[C] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ff9ff000-ff9ff7ff] Max Packet=[2048]
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 4 (level, low) -> IRQ 4
eth0: RealTek RTL8139 at 0xd800, 00:11:d8:1c:1d:3d, IRQ 4
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Intel 810 + AC97 Audio, version 1.01, 17:58:08 May 19 2005
PCI: Enabling device 0000:00:1f.5 (0001 -> 0003)
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH4 found at IO 0x1100 and 0x1000, MEM 0xffaff800 and 0xffaff400, IRQ 5
i810: Intel ICH4 mmio at 0xe0994800 and 0xe09a0400
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0000e800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000325de85]
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 5, io base 0000e880
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 4 (level, low) -> IRQ 4
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 4, io base 0000ec00
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
usb 2-1: new full speed USB device using address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
usb 2-2: new full speed USB device using address 3
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Brother Model: DCP-110C Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0169
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 2-1.1: new full speed USB device using address 4
usbcore: registered new driver hiddev
ehci_hcd 0000:00:1d.7: BIOS handoff failed (104, 1010001)
ehci_hcd 0000:00:1d.7: can't reset
ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -95
ehci_hcd: probe of 0000:00:1d.7 failed with error -95
input: USB HID v1.10 Keyboard [USB Keyboard + 2P Hub] on usb-0000:00:1d.1-1.1
input: USB HID v1.10 Device [USB Keyboard + 2P Hub] on usb-0000:00:1d.1-1.1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 2-1.2: new low speed USB device using address 5
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1.2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0xe0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hw_random hardware driver 1.0.0 loaded
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.6 to 64
MC'97 1 converters and GPIO not ready (0xff00)
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
input: PC Speaker
irda_init()
NET: Registered protocol family 23
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
cs: IO port probe 0x0100-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0300140(lo)
IPv6 over IPv4 tunneling driver
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
eth0: no IPv6 routers present
irq 5: nobody cared!
[<c010841a>] __report_bad_irq+0x2a/0x90
[<c0108510>] note_interrupt+0x70/0xb0
[<c01087f0>] do_IRQ+0x120/0x130
[<c0106a20>] common_interrupt+0x18/0x20
handlers:
[<e096b890>] (yenta_interrupt+0x0/0x40 [yenta_socket])
[<e09989a0>] (ohci_irq_handler+0x0/0x840 [ohci1394])
[<e09d1bd0>] (i810_interrupt+0x0/0xc0 [i810_audio])
[<e0a03760>] (usb_hcd_irq+0x0/0x70 [usbcore])
[<e0af35c0>] (snd_intel8x0_interrupt+0x0/0x230 [snd_intel8x0m])
Disabling IRQ #5

die Festplatte hab ich erst nach dem Start eingeschaltet

bye

**basti007** · 12.11.05, 11:57

wir sind uns scheinbar einig, dass es sich um einen IRQ Konflikt handelt!

In einigen Fällen ist der Kernel, der auf Ihrem Installationsmedium enthalten ist, so konfiguriert, daß er für bestimmte Geräte bestimmte IRQs benutzt. So ist es zum Beispiel im Kernel einiger Distributionen voreingestellt, daß der IRQ 5 für den SCSI-Controller TMC-950, den CD-ROM-Controller von Mitsumi und den Busmaus-Treiber benutzt wird. Wenn Sie zwei oder mehr dieser Geräte benutzen wollen, werden Sie zuerst Linux installieren müssen, solange nur eines dieser Geräte aktiviert ist. Anschließend müssen Sie den Kernel neu kompilieren, um für eines der Geräte einen anderen IRQ einzustellen. (Im Abschnitt »Einen neuen Kernel erstellen« in Kapitel 7, Software und den Kernel aktualisieren, erfahren Sie mehr über das Kompilieren des Kernels.)

Quelle: http://www.oreilly.de/german/freeboo...ger/ch034.html

leider finde ich keine Option zur Einstellung des IRQ! Weiß jemand Rat?