Anzeige:
Ergebnis 1 bis 7 von 7

Thema: Debian Sarge 3.1 - USB Hardware

  1. #1
    Registrierter Benutzer
    Registriert seit
    Nov 2005
    Ort
    Kaiserslautern
    Beiträge
    16

    Question Debian Sarge 3.1 - USB Hardware

    Hi,
    ich ein Problem mit meiner externen USB 2.0 Festplatte. Schalte ich sie ein erhalte ich die unten stehende Fehlermeldung und keine der per USB angeschlossenen Hardwareteile funzt mehr. Das betrifft im speziellen meine USB Tastatur, die über eine USB Hub verfügt über den meine Maus angeschlossen ist.
    An der Hardware kann es übrigens nicht liegen, dass das Problem unter SuSE Linux sowie Knoppix nicht besteht!

    Über jede Hilfe wäre ich sehr dankbar.

    Fehlermeldung auf der Konsole:

    syslogd@meise...
    meise223 kernel: Disabling IRQ #5

    Auszug aus syslog:
    Nov 7 18:17:01 meise223 /USR/SBIN/CRON[6685]: (root) CMD ( run-parts --report /etc/cron.hourly)
    Nov 7 18:17:45 meise223 kernel: irq 5: nobody cared!
    Nov 7 18:17:45 meise223 kernel: [__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90
    Nov 7 18:17:45 meise223 kernel: [note_interrupt+112/176] note_interrupt+0x70/0xb0
    Nov 7 18:17:45 meise223 kernel: [do_IRQ+288/304] do_IRQ+0x120/0x130
    Nov 7 18:17:45 meise223 kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
    Nov 7 18:17:45 meise223 kernel: [__do_softirq+46/128] __do_softirq+0x2e/0x80
    Nov 7 18:17:45 meise223 kernel: [do_softirq+39/48] do_softirq+0x27/0x30
    Nov 7 18:17:45 meise223 kernel: [do_IRQ+251/304] do_IRQ+0xfb/0x130
    Nov 7 18:17:45 meise223 kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
    Nov 7 18:17:45 meise223 kernel: [pvc_info+91/256] pvc_info+0x5b/0x100
    Nov 7 18:17:45 meise223 kernel: [default_idle+35/64] default_idle+0x23/0x40
    Nov 7 18:17:45 meise223 kernel: [cpu_idle+52/64] cpu_idle+0x34/0x40
    Nov 7 18:17:45 meise223 kernel: [start_kernel+424/496] start_kernel+0x1a8/0x1f0
    Nov 7 18:17:45 meise223 kernel: [unknown_bootoption+0/352] unknown_bootoption+0x0/0x160
    Nov 7 18:17:45 meise223 kernel: handlers:
    Nov 7 18:17:45 meise223 kernel: [__crc_sk_stream_mem_schedule+1380801/1457199] (yenta_interrupt+0x0/0x40 [yenta_socket])
    Nov 7 18:17:45 meise223 kernel: [__crc_xfrm_get_type+108194/3356969] (ohci_irq_handler+0x0/0x840 [ohci1394])
    Nov 7 18:17:45 meise223 kernel: [__crc_xfrm_get_type+342226/3356969] (i810_interrupt+0x0/0xc0 [i810_audio])
    Nov 7 18:17:45 meise223 kernel: [__crc_xfrm_get_type+545890/3356969] (usb_hcd_irq+0x0/0x70 [usbcore])
    Nov 7 18:17:45 meise223 kernel: [__crc_xfrm_get_type+1528514/3356969] (snd_intel8x0_interrupt+0x0/0x230 [snd_intel8x0m])
    Nov 7 18:17:45 meise223 kernel: Disabling IRQ #5

  2. #2
    /linux/user Avatar von torsten_boese
    Registriert seit
    Dec 2003
    Beiträge
    679
    poste mal deine ausgabe bei: lsusb lspci und lsmod

  3. #3
    Registrierter Benutzer
    Registriert seit
    Nov 2005
    Ort
    Kaiserslautern
    Beiträge
    16
    lsusb:
    us 003 Device 001: ID 0000:0000
    Bus 002 Device 005: ID 046d:c03e Logitech, Inc.
    Bus 002 Device 004: ID 0dc6:5000 Precision Squared Technology Corp.
    Bus 002 Device 003: ID 04f9:0169 Brother Industries, Ltd
    Bus 002 Device 002: ID 0dc6:5000 Precision Squared Technology Corp.
    Bus 002 Device 001: ID 0000:0000
    Bus 001 Device 001: ID 0000:0000


    lsmod:

    Module Size Used by
    ipv6 264740 10
    ds 18756 4
    parport_pc 36900 0
    parport 41800 1 parport_pc
    irtty_sir 9152 0
    sir_dev 19244 1 irtty_sir
    irda 197120 2 irtty_sir,sir_dev
    crc_ccitt 2144 1 irda
    pcspkr 3592 0
    8139cp 20672 0
    snd_intel8x0m 20264 0
    snd_intel8x0 36460 0
    snd_ac97_codec 69988 2 snd_intel8x0m,snd_intel8x0
    snd_pcm 98728 2 snd_intel8x0m,snd_intel8x0
    snd_timer 25732 1 snd_pcm
    snd_page_alloc 11752 3 snd_intel8x0m,snd_intel8x0,snd_pcm
    gameport 4704 1 snd_intel8x0
    snd_mpu401_uart 7968 1 snd_intel8x0
    snd_rawmidi 25124 1 snd_mpu401_uart
    snd_seq_device 8200 1 snd_rawmidi
    snd 57156 8 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm, snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_devi ce
    hw_random 5460 0
    shpchp 101900 0
    pciehp 99020 0
    pci_hotplug 34640 2 shpchp,pciehp
    intel_agp 22816 1
    agpgart 34664 1 intel_agp
    usbhid 32224 0
    usblp 13088 0
    usb_storage 69056 0
    ehci_hcd 32004 0
    eth1394 21576 0
    uhci_hcd 33136 0
    usbcore 119012 7 usbhid,usblp,usb_storage,ehci_hcd,uhci_hcd
    i810_audio 37588 0
    ac97_codec 18956 1 i810_audio
    soundcore 10336 2 snd,i810_audio
    8139too 26112 0
    mii 5120 2 8139cp,8139too
    ohci1394 35492 0
    yenta_socket 21728 0
    pcmcia_core 70868 2 ds,yenta_socket
    capability 4520 0
    commoncap 7232 1 capability
    tsdev 7392 0
    mousedev 10476 1
    joydev 9984 0
    evdev 9600 0
    sr_mod 17316 0
    sd_mod 21728 0
    sbp2 24392 0
    scsi_mod 125228 4 usb_storage,sr_mod,sd_mod,sbp2
    ieee1394 111512 3 eth1394,ohci1394,sbp2
    psmouse 20360 0
    ide_cd 42656 0
    cdrom 40732 2 sr_mod,ide_cd
    genrtc 9588 0
    ext3 127240 2
    jbd 62616 1 ext3
    mbcache 9348 1 ext3
    ide_generic 1408 0
    piix 13440 1
    ide_disk 19296 4
    ide_core 139940 5 usb_storage,ide_cd,ide_generic,piix,ide_disk
    unix 28756 90
    font 8320 0
    vesafb 6656 0
    cfbcopyarea 3872 1 vesafb
    cfbimgblt 3040 1 vesafb
    cfbfillrect 3776 1 vesafb


    lspci:
    0:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 21)
    0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 21)
    0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
    0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
    0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
    0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
    0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
    0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
    0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
    0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
    0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
    0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
    0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    0000:02:04.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
    0000:02:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
    0000:02:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
    0000:02:05.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04)

  4. #4
    /linux/user Avatar von torsten_boese
    Registriert seit
    Dec 2003
    Beiträge
    679
    sieht eigentlich ganz gut aus,

    gib mal dmesg ein und poste das mal..

    und deine /var/log/messages seid dem start..

    auf jeden Fall scheints du einen IRQ conflict zu haben ...

    mal nen anderen usb-port probieren. Also nicht am Hub sondern am Rechner. Und mal das gerät ohne hub direckt in den usb-port. Wenn du pci karten drin hast mal den steckplatz tauschen - kann sein das der Steckplatz mit dem USB controller collidiert...
    Geändert von torsten_boese (07.11.05 um 21:19 Uhr)

  5. #5
    Registrierter Benutzer
    Registriert seit
    Nov 2005
    Ort
    Kaiserslautern
    Beiträge
    16
    die Ausgaben poste ich später... bin gerad mit Win unterwegs...

    bei meinem Rechner handelt es sich um einen ASUS Notebook... keine PCI Karten! Das Notebook verfügt über einen internen USB 4er Hub an dem der Drucker, die Tastatur(und darüber die Maus) und die besagte Festplatte hängt.

    bis später

  6. #6
    Registrierter Benutzer
    Registriert seit
    Nov 2005
    Ort
    Kaiserslautern
    Beiträge
    16
    var/log/messages:

    Nov 8 17:28:13 meise223 syslogd 1.4.1#17: restart.
    Nov 8 17:28:13 meise223 kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
    Nov 8 17:28:13 meise223 kernel: Inspecting /boot/System.map-2.6.8-2-686
    Nov 8 17:28:13 meise223 kernel: Loaded 27390 symbols from /boot/System.map-2.6.8-2-686.
    Nov 8 17:28:13 meise223 kernel: Symbols match kernel version 2.6.8.
    Nov 8 17:28:13 meise223 kernel: No module symbols loaded - kernel modules not enabled.
    Nov 8 17:28:13 meise223 kernel: Linux version 2.6.8-2-686 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Thu May 19 17:53:30 JST 2005
    Nov 8 17:28:13 meise223 kernel: BIOS-provided physical RAM map:
    Nov 8 17:28:13 meise223 kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Nov 8 17:28:13 meise223 kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Nov 8 17:28:13 meise223 kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Nov 8 17:28:13 meise223 kernel: BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
    Nov 8 17:28:13 meise223 kernel: BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
    Nov 8 17:28:13 meise223 kernel: BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
    Nov 8 17:28:13 meise223 kernel: 0MB HIGHMEM available.
    Nov 8 17:28:13 meise223 kernel: 511MB LOWMEM available.
    Nov 8 17:28:13 meise223 kernel: DMI 2.3 present.
    Nov 8 17:28:13 meise223 kernel: ACPI: RSDP (v000 ACPIAM ) @ 0x000f5940
    Nov 8 17:28:13 meise223 kernel: ACPI: RSDT (v001 A M I OEMRSDT 0x11000419 MSFT 0x00000097) @ 0x1ff40000
    Nov 8 17:28:13 meise223 kernel: ACPI: FADT (v001 A M I OEMFACP 0x11000419 MSFT 0x00000097) @ 0x1ff40200
    Nov 8 17:28:13 meise223 kernel: ACPI: OEMB (v001 A M I OEMBIOS 0x11000419 MSFT 0x00000097) @ 0x1ff50040
    Nov 8 17:28:13 meise223 kernel: ACPI: DSDT (v001 0ABBN 0ABBN005 0x00000005 MSFT 0x0100000d) @ 0x00000000
    Nov 8 17:28:13 meise223 kernel: ACPI: PM-Timer IO Port: 0x408
    Nov 8 17:28:13 meise223 kernel: Built 1 zonelists
    Nov 8 17:28:13 meise223 kernel: Kernel command line: root=/dev/hda6 ro
    Nov 8 17:28:13 meise223 kernel: Found and enabled local APIC!
    Nov 8 17:28:13 meise223 kernel: Initializing CPU#0
    Nov 8 17:28:13 meise223 kernel: PID hash table entries: 2048 (order 11: 16384 bytes)
    Nov 8 17:28:13 meise223 kernel: Detected 1600.422 MHz processor.
    Nov 8 17:28:13 meise223 kernel: Using pmtmr for high-res timesource
    Nov 8 17:28:13 meise223 kernel: Console: colour VGA+ 80x25
    Nov 8 17:28:13 meise223 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Nov 8 17:28:13 meise223 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Nov 8 17:28:13 meise223 kernel: Memory: 510636k/523520k available (1551k kernel code, 12124k reserved, 690k data, 148k init, 0k highmem)
    Nov 8 17:28:13 meise223 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Nov 8 17:28:13 meise223 kernel: Calibrating delay loop... 3170.30 BogoMIPS
    Nov 8 17:28:13 meise223 kernel: Security Scaffold v1.0.0 initialized
    Nov 8 17:28:13 meise223 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Nov 8 17:28:13 meise223 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
    Nov 8 17:28:13 meise223 kernel: CPU: L2 cache: 2048K
    Nov 8 17:28:13 meise223 kernel: Intel machine check architecture supported.
    Nov 8 17:28:13 meise223 kernel: Intel machine check reporting enabled on CPU#0.
    Nov 8 17:28:13 meise223 kernel: CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
    Nov 8 17:28:13 meise223 kernel: Enabling fast FPU save and restore... done.
    Nov 8 17:28:13 meise223 kernel: Enabling unmasked SIMD FPU exception support... done.
    Nov 8 17:28:13 meise223 kernel: Checking 'hlt' instruction... OK.
    Nov 8 17:28:13 meise223 kernel: enabled ExtINT on CPU#0
    Nov 8 17:28:13 meise223 kernel: ESR value before enabling vector: 00000000
    Nov 8 17:28:13 meise223 kernel: ESR value after enabling vector: 00000000
    Nov 8 17:28:13 meise223 kernel: Using local APIC timer interrupts.
    Nov 8 17:28:13 meise223 kernel: calibrating APIC timer ...
    Nov 8 17:28:13 meise223 kernel: ..... CPU clock speed is 1599.0750 MHz.
    Nov 8 17:28:13 meise223 kernel: ..... host bus clock speed is 99.0984 MHz.
    Nov 8 17:28:13 meise223 kernel: checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
    Nov 8 17:28:13 meise223 kernel: Freeing initrd memory: 4556k freed
    Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 16
    Nov 8 17:28:13 meise223 kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
    Nov 8 17:28:13 meise223 kernel: PCI: Using configuration type 1
    Nov 8 17:28:13 meise223 kernel: mtrr: v2.0 (20020519)
    Nov 8 17:28:13 meise223 kernel: ACPI: Subsystem revision 20040326
    Nov 8 17:28:13 meise223 kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
    Nov 8 17:28:13 meise223 kernel: ACPI: Interpreter enabled
    Nov 8 17:28:13 meise223 kernel: ACPI: Using PIC for interrupt routing
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
    Nov 8 17:28:13 meise223 kernel: PCI: Probing PCI hardware (bus 00)
    Nov 8 17:28:13 meise223 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    Nov 8 17:28:13 meise223 kernel: PCI: Transparent bridge - 0000:00:1e.0
    Nov 8 17:28:13 meise223 kernel: ACPI: Embedded Controller [EC0] (gpe 28)
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *11 12)
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 12)
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 6 7 12)
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 12)
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 12) *0, disabled.
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 12) *0, disabled.
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 12) *0, disabled.
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 12)
    Nov 8 17:28:13 meise223 kernel: ACPI: Power Resource [GFAN] (off)
    Nov 8 17:28:13 meise223 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
    Nov 8 17:28:13 meise223 kernel: PnPBIOS: Scanning system for PnP BIOS support...
    Nov 8 17:28:13 meise223 kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00f3be0
    Nov 8 17:28:13 meise223 kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x47ba, dseg 0xf0000
    Nov 8 17:28:13 meise223 kernel: pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
    Nov 8 17:28:13 meise223 kernel: pnp: 00:0a: ioport range 0xcf8-0xcff could not be reserved
    Nov 8 17:28:13 meise223 kernel: PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
    Nov 8 17:28:13 meise223 kernel: PCI: Using ACPI for IRQ routing
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 4 (level, low) -> IRQ 4
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 4 (level, low) -> IRQ 4
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 4 (level, low) -> IRQ 4
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 4 (level, low) -> IRQ 4
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 11 (level, low) -> IRQ 11
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.2[C] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: VFS: Disk quotas dquot_6.5.1
    Nov 8 17:28:13 meise223 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Nov 8 17:28:13 meise223 kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
    Nov 8 17:28:13 meise223 kernel: devfs: boot_options: 0x0
    Nov 8 17:28:13 meise223 kernel: Initializing Cryptographic API
    Nov 8 17:28:13 meise223 kernel: isapnp: Scanning for PnP cards...
    Nov 8 17:28:13 meise223 kernel: isapnp: No Plug & Play device found
    Nov 8 17:28:13 meise223 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
    Nov 8 17:28:13 meise223 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    Nov 8 17:28:13 meise223 kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
    Nov 8 17:28:13 meise223 kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Nov 8 17:28:13 meise223 kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Nov 8 17:28:13 meise223 kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Nov 8 17:28:13 meise223 kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Nov 8 17:28:13 meise223 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Nov 8 17:28:13 meise223 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
    Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 2
    Nov 8 17:28:13 meise223 kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
    Nov 8 17:28:13 meise223 kernel: TCP: Hash tables configured (established 32768 bind 65536)
    Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 8
    Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 20
    Nov 8 17:28:13 meise223 kernel: ACPI: (supports S0 S1 S3 S4 S5)
    Nov 8 17:28:13 meise223 kernel: RAMDISK: cramfs filesystem found at block 0
    Nov 8 17:28:13 meise223 kernel: RAMDISK: Loading 4556 blocks [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^Hdone.
    Nov 8 17:28:13 meise223 kernel: VFS: Mounted root (cramfs filesystem) readonly.
    Nov 8 17:28:13 meise223 kernel: Freeing unused kernel memory: 148k freed
    Nov 8 17:28:13 meise223 kernel: vesafb: probe of vesafb0 failed with error -6
    Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 1
    Nov 8 17:28:13 meise223 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    Nov 8 17:28:13 meise223 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Nov 8 17:28:13 meise223 kernel: ICH4: IDE controller at PCI slot 0000:00:1f.1
    Nov 8 17:28:13 meise223 kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 4 (level, low) -> IRQ 4
    Nov 8 17:28:13 meise223 kernel: ICH4: chipset revision 3
    Nov 8 17:28:13 meise223 kernel: ICH4: not 100%% native mode: will probe irqs later
    Nov 8 17:28:13 meise223 kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdbio
    Nov 8 17:28:13 meise223 kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddio
    Nov 8 17:28:13 meise223 kernel: hda: HTS424040M9AT00, ATA DISK drive
    Nov 8 17:28:13 meise223 kernel: Using anticipatory io scheduler
    Nov 8 17:28:13 meise223 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Nov 8 17:28:13 meise223 kernel: hda: max request size: 1024KiB
    Nov 8 17:28:13 meise223 kernel: hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100)
    Nov 8 17:28:13 meise223 kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
    Nov 8 17:28:13 meise223 kernel: hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
    Nov 8 17:28:13 meise223 kernel: ide1 at 0x170-0x177,0x376 on irq 15
    Nov 8 17:28:13 meise223 kernel: kjournald starting. Commit interval 5 seconds
    Nov 8 17:28:13 meise223 kernel: EXT3-fs: mounted filesystem with ordered data mode.
    Nov 8 17:28:13 meise223 kernel: Adding 265032k swap on /dev/hda8. Priority:-1 extents:1
    Nov 8 17:28:13 meise223 kernel: EXT3 FS on hda6, internal journal
    Nov 8 17:28:13 meise223 kernel: Generic RTC Driver v1.07
    Nov 8 17:28:13 meise223 kernel: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
    Nov 8 17:28:13 meise223 kernel: Uniform CD-ROM driver Revision: 3.20
    Nov 8 17:28:13 meise223 kernel: Synaptics Touchpad, model: 1
    Nov 8 17:28:13 meise223 kernel: Firmware: 5.9
    Nov 8 17:28:13 meise223 kernel: 180 degree mounted touchpad
    Nov 8 17:28:13 meise223 kernel: Sensor: 18
    Nov 8 17:28:13 meise223 kernel: new absolute packet format
    Nov 8 17:28:13 meise223 kernel: Touchpad has extended capability bits
    Nov 8 17:28:13 meise223 kernel: -> four buttons
    Nov 8 17:28:13 meise223 kernel: -> multifinger detection
    Nov 8 17:28:13 meise223 kernel: -> palm detection
    Nov 8 17:28:13 meise223 kernel: input: SynPS/2 Synaptics TouchPad on isa0060/serio4
    Nov 8 17:28:13 meise223 kernel: SCSI subsystem initialized
    Nov 8 17:28:13 meise223 kernel: sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
    Nov 8 17:28:13 meise223 kernel: mice: PS/2 mouse device common for all mice
    Nov 8 17:28:13 meise223 kernel: ts: Compaq touchscreen protocol output
    Nov 8 17:28:13 meise223 kernel: Capability LSM initialized
    Nov 8 17:28:13 meise223 kernel: kjournald starting. Commit interval 5 seconds
    Nov 8 17:28:13 meise223 kernel: EXT3 FS on hda7, internal journal
    Nov 8 17:28:13 meise223 kernel: EXT3-fs: mounted filesystem with ordered data mode.
    Nov 8 17:28:13 meise223 kernel: Linux Kernel Card Services
    Nov 8 17:28:13 meise223 kernel: options: [pci] [cardbus] [pm]
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: Yenta: CardBus bridge found at 0000:02:05.0 [1043:1844]
    Nov 8 17:28:13 meise223 kernel: Yenta: ISA IRQ mask 0x0488, PCI irq 5
    Nov 8 17:28:13 meise223 kernel: Socket status: 30000006
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 11 (level, low) -> IRQ 11
    Nov 8 17:28:13 meise223 kernel: Yenta: CardBus bridge found at 0000:02:05.1 [1043:1844]
    Nov 8 17:28:13 meise223 kernel: Yenta: ISA IRQ mask 0x0488, PCI irq 11
    Nov 8 17:28:13 meise223 kernel: Socket status: 30000006
    Nov 8 17:28:13 meise223 kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:05.2[C] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ff9ff000-ff9ff7ff] Max Packet=[2048]
    Nov 8 17:28:13 meise223 kernel: 8139too Fast Ethernet driver 0.9.27
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 4 (level, low) -> IRQ 4
    Nov 8 17:28:13 meise223 kernel: eth0: RealTek RTL8139 at 0xd800, 00:11:d8:1c:1d:3d, IRQ 4
    Nov 8 17:28:13 meise223 kernel: Intel 810 + AC97 Audio, version 1.01, 17:58:08 May 19 2005
    Nov 8 17:28:13 meise223 kernel: PCI: Enabling device 0000:00:1f.5 (0001 -> 0003)
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: i810: Intel ICH4 found at IO 0x1100 and 0x1000, MEM 0xffaff800 and 0xffaff400, IRQ 5
    Nov 8 17:28:13 meise223 kernel: i810: Intel ICH4 mmio at 0xe0994800 and 0xe09a0400
    Nov 8 17:28:13 meise223 kernel: i810_audio: Primary codec has ID 0
    Nov 8 17:28:13 meise223 kernel: i810_audio: Audio Controller supports 6 channels.
    Nov 8 17:28:13 meise223 kernel: i810_audio: Defaulting to base 2 channel mode.
    Nov 8 17:28:13 meise223 kernel: i810_audio: Resetting connection 0
    Nov 8 17:28:13 meise223 kernel: i810_audio: Connection 0 with codec id 0
    Nov 8 17:28:13 meise223 kernel: ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
    Nov 8 17:28:13 meise223 kernel: i810_audio: AC'97 codec 0, new EID value = 0x05c7
    Nov 8 17:28:13 meise223 kernel: i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
    Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver usbfs
    Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver hub
    Nov 8 17:28:13 meise223 kernel: USB Universal Host Controller Interface driver v2.2
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
    Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
    Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.0: irq 11, io base 0000e800
    Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    Nov 8 17:28:13 meise223 kernel: hub 1-0:1.0: USB hub found
    Nov 8 17:28:13 meise223 kernel: hub 1-0:1.0: 2 ports detected
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
    Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.1: irq 5, io base 0000e880
    Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    Nov 8 17:28:13 meise223 kernel: hub 2-0:1.0: USB hub found
    Nov 8 17:28:13 meise223 kernel: hub 2-0:1.0: 2 ports detected
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 4 (level, low) -> IRQ 4
    Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
    Nov 8 17:28:13 meise223 kernel: ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
    Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.2: irq 4, io base 0000ec00
    Nov 8 17:28:13 meise223 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    Nov 8 17:28:13 meise223 kernel: hub 3-0:1.0: USB hub found
    Nov 8 17:28:13 meise223 kernel: hub 3-0:1.0: 2 ports detected
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
    Nov 8 17:28:13 meise223 kernel: usb 2-1: new full speed USB device using address 2
    Nov 8 17:28:13 meise223 kernel: hub 2-1:1.0: USB hub found
    Nov 8 17:28:13 meise223 kernel: hub 2-1:1.0: 3 ports detected
    Nov 8 17:28:13 meise223 kernel: usb 2-2: new full speed USB device using address 3
    Nov 8 17:28:13 meise223 kernel: Initializing USB Mass Storage driver...
    Nov 8 17:28:13 meise223 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
    Nov 8 17:28:13 meise223 kernel: Vendor: Brother Model: DCP-110C Rev: 1.00
    Nov 8 17:28:13 meise223 kernel: Type: Direct-Access ANSI SCSI revision: 02
    Nov 8 17:28:13 meise223 kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
    Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver usb-storage
    Nov 8 17:28:13 meise223 kernel: USB Mass Storage support registered.
    Nov 8 17:28:13 meise223 kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0169
    Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver usblp
    Nov 8 17:28:13 meise223 kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Nov 8 17:28:13 meise223 kernel: usb 2-1.1: new full speed USB device using address 4
    Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver hiddev
    Nov 8 17:28:13 meise223 kernel: ehci_hcd: probe of 0000:00:1d.7 failed with error -95
    Nov 8 17:28:13 meise223 kernel: input: USB HID v1.10 Keyboard [USB Keyboard + 2P Hub] on usb-0000:00:1d.1-1.1
    Nov 8 17:28:13 meise223 kernel: input: USB HID v1.10 Device [USB Keyboard + 2P Hub] on usb-0000:00:1d.1-1.1
    Nov 8 17:28:13 meise223 kernel: usbcore: registered new driver usbhid
    Nov 8 17:28:13 meise223 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    Nov 8 17:28:13 meise223 kernel: usb 2-1.2: new low speed USB device using address 5
    Nov 8 17:28:13 meise223 kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1.2
    Nov 8 17:28:13 meise223 kernel: Linux agpgart interface v0.100 (c) Dave Jones
    Nov 8 17:28:13 meise223 kernel: agpgart: Detected an Intel 855PM Chipset.
    Nov 8 17:28:13 meise223 kernel: agpgart: Maximum main memory to use for agp memory: 439M
    Nov 8 17:28:13 meise223 kernel: agpgart: AGP aperture is 256M @ 0xe0000000
    Nov 8 17:28:13 meise223 kernel: cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
    Nov 8 17:28:13 meise223 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Nov 8 17:28:13 meise223 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Nov 8 17:28:13 meise223 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Nov 8 17:28:13 meise223 kernel: hw_random hardware driver 1.0.0 loaded
    Nov 8 17:28:13 meise223 kernel: ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
    Nov 8 17:28:13 meise223 kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
    Nov 8 17:28:13 meise223 kernel: input: PC Speaker
    Nov 8 17:28:13 meise223 kernel: NET: Registered protocol family 23
    Nov 8 17:28:13 meise223 kernel: parport: PnPBIOS parport detected.
    Nov 8 17:28:13 meise223 kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    Nov 8 17:28:13 meise223 kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    Nov 8 17:28:15 meise223 kernel: cs: IO port probe 0x0100-0x04ff: clean.
    Nov 8 17:28:15 meise223 kernel: cs: IO port probe 0x0800-0x08ff: clean.
    Nov 8 17:28:15 meise223 kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07
    Nov 8 17:28:15 meise223 kernel: cs: IO port probe 0x0a00-0x0aff: clean.
    Nov 8 17:28:16 meise223 kernel: NET: Registered protocol family 10
    Nov 8 17:28:16 meise223 kernel: Disabled Privacy Extensions on device c0300140(lo)
    Nov 8 17:28:16 meise223 kernel: IPv6 over IPv4 tunneling driver
    Nov 8 17:28:21 meise223 kernel: drivers/usb/input/hid-input.c: event field not found
    Nov 8 17:28:21 meise223 kernel: drivers/usb/input/hid-input.c: event field not found
    Nov 8 17:32:44 meise223 kernel: [__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90
    Nov 8 17:32:44 meise223 kernel: [note_interrupt+112/176] note_interrupt+0x70/0xb0
    Nov 8 17:32:44 meise223 kernel: [do_IRQ+288/304] do_IRQ+0x120/0x130
    Nov 8 17:32:44 meise223 kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20

    __________________________________________________ ____

    dmesg:

    > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
    BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
    BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    On node 0 totalpages: 130880
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 126784 pages, LIFO batch:16
    HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 ACPIAM ) @ 0x000f5940
    ACPI: RSDT (v001 A M I OEMRSDT 0x11000419 MSFT 0x00000097) @ 0x1ff40000
    ACPI: FADT (v001 A M I OEMFACP 0x11000419 MSFT 0x00000097) @ 0x1ff40200
    ACPI: OEMB (v001 A M I OEMBIOS 0x11000419 MSFT 0x00000097) @ 0x1ff50040
    ACPI: DSDT (v001 0ABBN 0ABBN005 0x00000005 MSFT 0x0100000d) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x408
    Built 1 zonelists
    Kernel command line: root=/dev/hda6 ro
    Found and enabled local APIC!
    Initializing CPU#0
    PID hash table entries: 2048 (order 11: 16384 bytes)
    Detected 1600.422 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 510636k/523520k available (1551k kernel code, 12124k reserved, 690k data, 148k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay loop... 3170.30 BogoMIPS
    Security Scaffold v1.0.0 initialized
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000
    CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 1599.0750 MHz.
    ..... host bus clock speed is 99.0984 MHz.
    checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
    Freeing initrd memory: 4556k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20040326
    ACPI: IRQ9 SCI: Edge set to Level Trigger.
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    ACPI: Embedded Controller [EC0] (gpe 28)
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 6 7 12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 12)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 12)
    ACPI: Power Resource [GFAN] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    PnPBIOS: Scanning system for PnP BIOS support...
    PnPBIOS: Found PnP BIOS installation structure at 0xc00f3be0
    PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x47ba, dseg 0xf0000
    pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
    pnp: 00:0a: ioport range 0xcf8-0xcff could not be reserved
    PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
    PCI: Using ACPI for IRQ routing
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
    ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
    ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 4 (level, low) -> IRQ 4
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
    ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 4 (level, low) -> IRQ 4
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 4 (level, low) -> IRQ 4
    ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 4 (level, low) -> IRQ 4
    ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI interrupt 0000:02:05.2[C] -> GSI 5 (level, low) -> IRQ 5
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x0
    Initializing Cryptographic API
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
    RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    input: AT Translated Set 2 keyboard on isa0060/serio0
    NET: Registered protocol family 2
    IP: routing cache hash table of 4096 buckets, 32Kbytes
    TCP: Hash tables configured (established 32768 bind 65536)
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    ACPI: (supports S0 S1 S3 S4 S5)
    RAMDISK: cramfs filesystem found at block 0
    RAMDISK: Loading 4556 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
    VFS: Mounted root (cramfs filesystem) readonly.
    Freeing unused kernel memory: 148k freed
    vesafb: probe of vesafb0 failed with error -6
    NET: Registered protocol family 1
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH4: IDE controller at PCI slot 0000:00:1f.1
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 4 (level, low) -> IRQ 4
    ICH4: chipset revision 3
    ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdbio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddio
    hda: HTS424040M9AT00, ATA DISK drive
    Using anticipatory io scheduler
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: max request size: 1024KiB
    hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100)
    /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
    hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 265032k swap on /dev/hda8. Priority:-1 extents:1
    EXT3 FS on hda6, internal journal
    Generic RTC Driver v1.07
    hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    Synaptics Touchpad, model: 1
    Firmware: 5.9
    180 degree mounted touchpad
    Sensor: 18
    new absolute packet format
    Touchpad has extended capability bits
    -> four buttons
    -> multifinger detection
    -> palm detection
    input: SynPS/2 Synaptics TouchPad on isa0060/serio4
    ieee1394: Initialized config rom entry `ip1394'
    SCSI subsystem initialized
    sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
    mice: PS/2 mouse device common for all mice
    ts: Compaq touchscreen protocol output
    Capability LSM initialized
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda7, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Linux Kernel Card Services
    options: [pci] [cardbus] [pm]
    ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5
    Yenta: CardBus bridge found at 0000:02:05.0 [1043:1844]
    Yenta: ISA IRQ mask 0x0488, PCI irq 5
    Socket status: 30000006
    ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 11 (level, low) -> IRQ 11
    Yenta: CardBus bridge found at 0000:02:05.1 [1043:1844]
    Yenta: ISA IRQ mask 0x0488, PCI irq 11
    Socket status: 30000006
    ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI interrupt 0000:02:05.2[C] -> GSI 5 (level, low) -> IRQ 5
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ff9ff000-ff9ff7ff] Max Packet=[2048]
    8139too Fast Ethernet driver 0.9.27
    ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 4 (level, low) -> IRQ 4
    eth0: RealTek RTL8139 at 0xd800, 00:11:d8:1c:1d:3d, IRQ 4
    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    Intel 810 + AC97 Audio, version 1.01, 17:58:08 May 19 2005
    PCI: Enabling device 0000:00:1f.5 (0001 -> 0003)
    ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    i810: Intel ICH4 found at IO 0x1100 and 0x1000, MEM 0xffaff800 and 0xffaff400, IRQ 5
    i810: Intel ICH4 mmio at 0xe0994800 and 0xe09a0400
    i810_audio: Primary codec has ID 0
    i810_audio: Audio Controller supports 6 channels.
    i810_audio: Defaulting to base 2 channel mode.
    i810_audio: Resetting connection 0
    i810_audio: Connection 0 with codec id 0
    ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
    i810_audio: AC'97 codec 0, new EID value = 0x05c7
    i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: irq 11, io base 0000e800
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
    uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000325de85]
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: irq 5, io base 0000e880
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 4 (level, low) -> IRQ 4
    uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
    ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
    ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: irq 4, io base 0000ec00
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
    ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
    usb 2-1: new full speed USB device using address 2
    hub 2-1:1.0: USB hub found
    hub 2-1:1.0: 3 ports detected
    usb 2-2: new full speed USB device using address 3
    Initializing USB Mass Storage driver...
    scsi0 : SCSI emulation for USB Mass Storage devices
    Vendor: Brother Model: DCP-110C Rev: 1.00
    Type: Direct-Access ANSI SCSI revision: 02
    Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
    USB Mass Storage device found at 3
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0169
    usbcore: registered new driver usblp
    drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    usb 2-1.1: new full speed USB device using address 4
    usbcore: registered new driver hiddev
    ehci_hcd 0000:00:1d.7: BIOS handoff failed (104, 1010001)
    ehci_hcd 0000:00:1d.7: can't reset
    ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -95
    ehci_hcd: probe of 0000:00:1d.7 failed with error -95
    input: USB HID v1.10 Keyboard [USB Keyboard + 2P Hub] on usb-0000:00:1d.1-1.1
    input: USB HID v1.10 Device [USB Keyboard + 2P Hub] on usb-0000:00:1d.1-1.1
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    usb 2-1.2: new low speed USB device using address 5
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1.2
    Linux agpgart interface v0.100 (c) Dave Jones
    agpgart: Detected an Intel 855PM Chipset.
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: AGP aperture is 256M @ 0xe0000000
    cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    hw_random hardware driver 1.0.0 loaded
    ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
    PCI: Setting latency timer of device 0000:00:1f.6 to 64
    MC'97 1 converters and GPIO not ready (0xff00)
    8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
    input: PC Speaker
    irda_init()
    NET: Registered protocol family 23
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    cs: IO port probe 0x0100-0x04ff: clean.
    cs: IO port probe 0x0800-0x08ff: clean.
    cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07
    cs: IO port probe 0x0a00-0x0aff: clean.
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device c0300140(lo)
    IPv6 over IPv4 tunneling driver
    drivers/usb/input/hid-input.c: event field not found
    drivers/usb/input/hid-input.c: event field not found
    eth0: no IPv6 routers present
    irq 5: nobody cared!
    [<c010841a>] __report_bad_irq+0x2a/0x90
    [<c0108510>] note_interrupt+0x70/0xb0
    [<c01087f0>] do_IRQ+0x120/0x130
    [<c0106a20>] common_interrupt+0x18/0x20
    handlers:
    [<e096b890>] (yenta_interrupt+0x0/0x40 [yenta_socket])
    [<e09989a0>] (ohci_irq_handler+0x0/0x840 [ohci1394])
    [<e09d1bd0>] (i810_interrupt+0x0/0xc0 [i810_audio])
    [<e0a03760>] (usb_hcd_irq+0x0/0x70 [usbcore])
    [<e0af35c0>] (snd_intel8x0_interrupt+0x0/0x230 [snd_intel8x0m])
    Disabling IRQ #5


    die Festplatte hab ich erst nach dem Start eingeschaltet

    bye

  7. #7
    Registrierter Benutzer
    Registriert seit
    Nov 2005
    Ort
    Kaiserslautern
    Beiträge
    16
    wir sind uns scheinbar einig, dass es sich um einen IRQ Konflikt handelt!

    In einigen Fällen ist der Kernel, der auf Ihrem Installationsmedium enthalten ist, so konfiguriert, daß er für bestimmte Geräte bestimmte IRQs benutzt. So ist es zum Beispiel im Kernel einiger Distributionen voreingestellt, daß der IRQ 5 für den SCSI-Controller TMC-950, den CD-ROM-Controller von Mitsumi und den Busmaus-Treiber benutzt wird. Wenn Sie zwei oder mehr dieser Geräte benutzen wollen, werden Sie zuerst Linux installieren müssen, solange nur eines dieser Geräte aktiviert ist. Anschließend müssen Sie den Kernel neu kompilieren, um für eines der Geräte einen anderen IRQ einzustellen. (Im Abschnitt »Einen neuen Kernel erstellen« in Kapitel 7, Software und den Kernel aktualisieren, erfahren Sie mehr über das Kompilieren des Kernels.)

    Quelle: http://www.oreilly.de/german/freeboo...ger/ch034.html

    leider finde ich keine Option zur Einstellung des IRQ! Weiß jemand Rat?

Ähnliche Themen

  1. usb-drucker installation
    Von ainulindale im Forum stationäre Hardware
    Antworten: 5
    Letzter Beitrag: 13.04.06, 15:32
  2. [kernel 2.6.7 und suse9.0] Problem mit hotplug/udev? Kann booten, aber ....
    Von carnil im Forum Kompilieren von Kernel und Sourcen
    Antworten: 14
    Letzter Beitrag: 29.03.06, 09:33
  3. Hach... Usb-Floppy
    Von Zinnwurm im Forum stationäre Hardware
    Antworten: 15
    Letzter Beitrag: 23.11.04, 21:11
  4. Mount-Problem einer externen Harddisk (USB2.0) unter SuSE 9.1
    Von SquirrlZ im Forum System installieren und konfigurieren
    Antworten: 3
    Letzter Beitrag: 12.06.04, 17:15
  5. usb-festplatten
    Von w.freudenstein im Forum Linux Allgemein
    Antworten: 11
    Letzter Beitrag: 10.02.04, 19:27

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •