Festplatte oder Mainbord kaputt?

**ThorstenK** · 17.10.05, 13:24

Hallo,

mein System spinnt seit einigen Tagen: Die Festplatten steigen während des Betriebs aus dem DMA-Modus aus, ich hab diverse Kernelversionen versucht (jedes Mal das Selbe), an der Software liegt es also wohl nicht. Jetzt stellt sich mir die Frage ob das Problem von der/den Platte(n) kommt oder vom Mainbord aus geht?!

Hier mal der Auszug aus der syslog
Oct 17 12:27:27 aspartat kernel: hdb: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error }
Oct 17 12:27:27 aspartat kernel: hdb: status error: error=0x7f { DriveStatusError UncorrectableError SectorIdNotFound TrackZeroNotFound AddrMarkNotFound }, LBAsect=260013951, sector=51123983
Oct 17 12:27:27 aspartat kernel: ide: failed opcode was: unknown
Oct 17 12:27:27 aspartat kernel: hdb: drive not ready for command
Oct 17 12:27:37 aspartat kernel: ide0: reset: success

und hier die Meldung von dmesg
hdb: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error }
hdb: status error: error=0x7f { DriveStatusError UncorrectableError SectorIdNotFound TrackZeroNotFound AddrMarkNotFound }, LBAsect=260013951, sector=51123983
ide: failed opcode was: unknown
hda: DMA disabled
hdb: DMA disabled
hdb: drive not ready for command
ide0: reset: success

Sieht doch schon irgendwie nach der Festplatte an /dev/hdb aus oder?? Was meint ihr ist die hin oder kann man da noch was machen??

Thorsten

**Tomek** · 17.10.05, 14:01

Kannst du bitte mal die Ausgabe von smartctl hier posten?

Code:

smartctl -a /dev/hdb

Du kannst auch deine Festplatte mit Hilfe von smartctl prüfen lassen:

Code:

smartctl -t long /dev/hdb

Während der Test läuft, kannst du ganz normal mit dem Rechner weiter arbeiten, solltest ihn aber nicht neustarten oder ausschalten.

**ThorstenK** · 17.10.05, 16:55

Hallo,

das ist die Ausgabe von smartctl -a /dev/hdb

Code:

smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     Maxtor 6Y060L0
Serial Number:    Y2RH0F7E
Firmware Version: YAR41VW0
User Capacity:    61,492,838,400 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Mon Oct 17 16:20:10 2005 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (  34)	The self-test routine was interrupted
					by the host with a hard or soft reset.
Total time to complete Offline 
data collection: 		 ( 181) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  33) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   252   252   063    Pre-fail  Always       -       587
  4 Start_Stop_Count        0x0032   253   253   000    Old_age   Always       -       5
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       0
  6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   251   250   187    Pre-fail  Always       -       52244
  9 Power_On_Minutes        0x0032   229   229   000    Old_age   Always       -       788h+35m
 10 Spin_Retry_Count        0x002b   252   252   157    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x002b   252   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   251   251   000    Old_age   Always       -       1089
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   253   253   000    Old_age   Always       -       47
195 Hardware_ECC_Recovered  0x000a   253   252   000    Old_age   Always       -       569
196 Reallocated_Event_Count 0x0008   253   253   000    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0008   253   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0008   199   199   000    Old_age   Offline      -       0
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   249   000    Old_age   Always       -       55
202 TA_Increase_Count       0x000a   253   252   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       0
204 Shock_Count_Write_Opern 0x000a   253   252   000    Old_age   Always       -       0
205 Shock_Rate_Write_Opern  0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   252   252   000    Old_age   Always       -       0
208 Spin_Buzz               0x002a   252   252   000    Old_age   Always       -       0
209 Offline_Seek_Performnce 0x0024   197   197   000    Old_age   Offline      -       0
 99 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
100 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
101 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 2
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 7602 hours (316 days + 18 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 e0  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 00 00 00 e0 08      00:03:24.272  READ DMA
  c6 00 10 00 00 00 e0 08      00:03:24.272  SET MULTIPLE MODE
  91 00 3f 00 00 00 ef 08      00:03:24.272  INITIALIZE DEVICE PARAMETERS [OBS-6]
  10 00 00 00 00 00 e0 08      00:03:24.256  RECALIBRATE [OBS-4]
  c8 00 01 00 00 00 e0 04      00:03:24.240  READ DMA

Error 1 occurred at disk power-on lifetime: 7602 hours (316 days + 18 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 e0  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 00 00 00 e0 00      00:03:24.208  READ DMA
  b0 d9 10 01 4f c2 a0 00      00:03:23.856  SMART DISABLE OPERATIONS
  b0 da 10 01 4f c2 a0 00      00:03:23.840  SMART RETURN STATUS
  b0 d8 10 01 4f c2 a0 00      00:03:23.776  SMART ENABLE OPERATIONS
  c6 03 10 01 00 00 a0 00      00:03:23.776  SET MULTIPLE MODE

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Ich habe auch den Test gemacht.. leider weiss ich nicht wie ich die Resultate angezeigt bekomme?!

Thorsten

**Tomek** · 17.10.05, 17:35

Zitat von ThorstenK

Ich habe auch den Test gemacht.. leider weiss ich nicht wie ich die Resultate angezeigt bekomme?!

Das Testergebnis kannst du wieder mit smartctl -a /dev/hdb abrufen. Es wird am Schluss angezeigt, wenn der Test durchgelaufen ist.

**ThorstenK** · 18.10.05, 13:33

Ok,

hier ist das Testergebnis:
hast du schon ne Vermutung an was es liegen koennte??

Code:

smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     Maxtor 6Y060L0
Serial Number:    Y2RH0F7E
Firmware Version: YAR41VW0
User Capacity:    61,492,838,400 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Tue Oct 18 14:32:16 2005 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 181) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  33) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   252   252   063    Pre-fail  Always       -       763
  4 Start_Stop_Count        0x0032   253   253   000    Old_age   Always       -       7
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       0
  6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   251   250   187    Pre-fail  Always       -       65213
  9 Power_On_Minutes        0x0032   229   229   000    Old_age   Always       -       800h+37m
 10 Spin_Retry_Count        0x002b   252   252   157    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x002b   252   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   251   251   000    Old_age   Always       -       1091
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   253   253   000    Old_age   Always       -       48
195 Hardware_ECC_Recovered  0x000a   253   252   000    Old_age   Always       -       702
196 Reallocated_Event_Count 0x0008   253   253   000    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0008   253   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0008   199   199   000    Old_age   Offline      -       0
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   249   000    Old_age   Always       -       13
202 TA_Increase_Count       0x000a   253   252   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       0
204 Shock_Count_Write_Opern 0x000a   253   252   000    Old_age   Always       -       0
205 Shock_Rate_Write_Opern  0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   252   252   000    Old_age   Always       -       0
208 Spin_Buzz               0x002a   252   252   000    Old_age   Always       -       0
209 Offline_Seek_Performnce 0x0024   195   193   000    Old_age   Offline      -       0
 99 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
100 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
101 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 2
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 7602 hours (316 days + 18 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 e0  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 00 00 00 e0 08      00:03:24.272  READ DMA
  c6 00 10 00 00 00 e0 08      00:03:24.272  SET MULTIPLE MODE
  91 00 3f 00 00 00 ef 08      00:03:24.272  INITIALIZE DEVICE PARAMETERS [OBS-6]
  10 00 00 00 00 00 e0 08      00:03:24.256  RECALIBRATE [OBS-4]
  c8 00 01 00 00 00 e0 04      00:03:24.240  READ DMA

Error 1 occurred at disk power-on lifetime: 7602 hours (316 days + 18 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 e0  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 00 00 00 e0 00      00:03:24.208  READ DMA
  b0 d9 10 01 4f c2 a0 00      00:03:23.856  SMART DISABLE OPERATIONS
  b0 da 10 01 4f c2 a0 00      00:03:23.840  SMART RETURN STATUS
  b0 d8 10 01 4f c2 a0 00      00:03:23.776  SMART ENABLE OPERATIONS
  c6 03 10 01 00 00 a0 00      00:03:23.776  SET MULTIPLE MODE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      7915         -
# 2  Extended offline    Completed without error       00%      7910         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

**Tomek** · 18.10.05, 14:16

Ich würde die Festplatte noch mit dem Tool des Festplattenherstellers prüfen und auch mal das Kabel austauschen.

**ThorstenK** · 20.10.05, 17:04

Hallo Tomek,

koenntest du mir die einzelnen Error-messages mal etwas erlautern?
Koennten die Fehler auf vom ide-controller kommen? Was denkst du? Der Maxtor Test erkennt leider die Festplatte(n) von mir nicht, keine Ahnung warum?!

Code:

smartctl -a /dev/hda
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     Maxtor 6Y120L0
Serial Number:    Y35GKYAE
Firmware Version: YAR41BW0
User Capacity:    122,942,324,736 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Thu Oct 20 18:02:28 2005 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 242) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  54) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   205   205   063    Pre-fail  Always       -       4615
  4 Start_Stop_Count        0x0032   253   253   000    Old_age   Always       -       23
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       0
  6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   251   250   187    Pre-fail  Always       -       48183
  9 Power_On_Minutes        0x0032   251   251   000    Old_age   Always       -       790h+01m
 10 Spin_Retry_Count        0x002b   253   252   157    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x002b   253   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   252   252   000    Old_age   Always       -       488
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   253   253   000    Old_age   Always       -       39
195 Hardware_ECC_Recovered  0x000a   253   252   000    Old_age   Always       -       5091
196 Reallocated_Event_Count 0x0008   253   253   000    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0008   253   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0008   199   199   000    Old_age   Offline      -       0
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   251   000    Old_age   Always       -       1
202 TA_Increase_Count       0x000a   253   252   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       1
204 Shock_Count_Write_Opern 0x000a   253   252   000    Old_age   Always       -       0
205 Shock_Rate_Write_Opern  0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   253   252   000    Old_age   Always       -       0
208 Spin_Buzz               0x002a   253   252   000    Old_age   Always       -       0
209 Offline_Seek_Performnce 0x0024   188   188   000    Old_age   Offline      -       0
 99 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
100 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
101 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 4
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4 occurred at disk power-on lifetime: 675 hours (28 days + 3 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 50 b6 2c e1  Error: ICRC, ABRT at LBA = 0x012cb650 = 19707472

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 50 b6 2c e1 08      00:06:09.408  READ DMA
  c8 00 08 50 b6 28 e1 08      00:06:09.392  READ DMA
  c8 00 08 50 b6 24 e1 08      00:06:09.392  READ DMA
  c8 00 08 50 b6 20 e1 08      00:06:09.376  READ DMA
  c8 00 08 50 b6 1c e1 08      00:06:09.376  READ DMA

Error 3 occurred at disk power-on lifetime: 651 hours (27 days + 3 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 48 55 54 e0  Error: ICRC, ABRT at LBA = 0x00545548 = 5526856

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 48 55 54 e0 08      00:10:11.056  READ DMA
  c8 00 08 80 a1 54 e0 08      00:10:11.040  READ DMA
  c8 00 08 b0 d1 30 e1 08      00:10:11.040  READ DMA
  c8 00 08 50 e9 5a e0 08      00:10:11.040  READ DMA
  c8 00 08 a8 d1 30 e1 08      00:10:11.040  READ DMA

Error 2 occurred at disk power-on lifetime: 29 hours (1 days + 5 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 f4 e0 63 e0  Error: ICRC, ABRT at LBA = 0x0063e0f4 = 6545652

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 f4 e0 63 e0 00      00:06:39.920  READ DMA
  c8 00 01 f3 e0 63 e0 00      00:06:39.920  READ DMA
  c8 00 01 f2 e0 63 e0 00      00:06:39.920  READ DMA
  c8 00 01 f1 e0 63 e0 00      00:06:39.920  READ DMA
  c8 00 01 23 b2 35 e0 00      00:06:39.920  READ DMA

Error 1 occurred at disk power-on lifetime: 28 hours (1 days + 4 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 f7 e0 63 e0  Error: ICRC, ABRT at LBA = 0x0063e0f7 = 6545655

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 f7 e0 63 e0 00      00:08:31.952  READ DMA
  c8 00 01 f6 e0 63 e0 00      00:08:31.952  READ DMA
  c8 00 01 f5 e0 63 e0 00      00:08:31.952  READ DMA
  c8 00 01 f4 e0 63 e0 00      00:08:31.952  READ DMA
  c8 00 01 f3 e0 63 e0 00      00:08:31.952  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%       738         -
# 2  Extended offline    Completed without error       00%       719         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.