Anzeige:
Ergebnis 1 bis 8 von 8

Thema: beim Start ausgelastet...

  1. #1
    Registrierter Benutzer
    Registriert seit
    Mar 2004
    Ort
    Erfurt
    Beiträge
    351

    beim Start ausgelastet...

    Hallo,
    ich woltle gestern mein Linux starten, KDE hat aufgebaut und als die ersten Programme vom Autostart noch gar nicht richtig fertig geladen waren (darunter sind gkrellm und firefox) konnte ich fast nicht mehr die maus bewegen. mein gkrellm hat angezeigt: 100% CPU auslast und mein Speicher (1 GB DDR) ist auch völlig belegt! Wenn ich die Maus bewegt habe, konntei ch erst nach 2 Minuten eine Veränderung erkennen. Das Starten einer Konsole etc. wäre fast unmöglich gewesen!
    Aber ich habe auch schon eine Ahnung was es sein könnte. Das passiert erst, wenn die Programme geladen werden und bevor alles geladen wurde, hab ich ganz schnell die Konsole geöffnet und konnte per top sehen, welches Programm für diese imense Auslastung Auslastung zuständig ist. Wenige Sekunden danach hat mein Rechner nicht mehr reagiert...
    Das Ergebnis: gs und foomatic-rip waren die zwei, die die ganzen Resourcen verbraucht haben.
    heute früh habe ich meinen rechner angemacht und ihn laufen lassen, in der hoffnung, wenn er mehrere stunden so stark arbeitet, vielleicht hört es dann auch mal auf (vorher hatte ich das schopn vergebens mit 20 min ausprobiert). als ich jetzt wiedergekommen bin, ca. 10h später konnte ich wieder an meinen rechner! d.h. Speicher war wieder wunderbar frei, das Problem lag an der CPU, Auslastung: immer noch 99-100%.
    top sagte mir, dass gs dran schuld ist, nachdem ich das beendet habe, per pkill, ging auch alles wieder normal, so wie früher. foomatic-rip war aber schon beendet!
    ich nehme also an, dass foomatic-rip (Beschreibung von man: "Universal print filter/RIP wrapper") für die RAM Auslastung zuständig war und gs (=Ghostscript, für PDF Dateien) für die CPU Auslastung.

    ## da ich leider die Logs nicht hier herein schreiben kann, weil die zu groß sind, poste ich sie in die 1. antwort!

    Ich glaube zwar nicht, dass euch die Logs so sonderlich interressieren, aber manchmal findet man darin auch was wissenswertes, aber dazu ist es vielleicht auch zu unübersichtlich...

    OK, also nun die Fragen: ich hatte kürzlich ein Drucker installiert, hängt das irgendwie mit foomatic-rip zusammen, dass das automatisch gestartet wurde? Wie kann ich meinem Linux sagen, dass er am Anfang gs und foomatic-rip nicht starten soll, oder wenn das nicht geht, wie kann ich gleich in den Autostart die Befehle "pkill foomatic-rip", bzw. "pkill gs" schreiben?

    Wäre euch unendlich dankbar, wenn ihr mir helfen könntet!

  2. #2
    Registrierter Benutzer
    Registriert seit
    Mar 2004
    Ort
    Erfurt
    Beiträge
    351
    ok, hier die versprochenen Logs:
    Code:
    BOOT LOG: 
    Sep 27 05:47:49 localhost syslog: Starten von syslogd succeeded
    Sep 27 05:47:49 localhost syslog: Starten von klogd succeeded
    Sep 27 05:47:50 localhost irqbalance: Starten von irqbalance succeeded
    Sep 27 05:47:50 localhost portmap: Starten von portmap succeeded
    Sep 27 05:47:50 localhost nfslock: Starten von rpc.statd succeeded
    Sep 27 05:47:51 localhost rpcidmapd: Starten von rpc.idmapd succeeded
    Sep 27 05:47:44 localhost rc: readahead_early starten:  succeeded 
    Sep 27 05:47:51 localhost netfs: Andere Dateisysteme einhängen:  succeeded
    Sep 27 05:47:51 localhost rc: lm_sensors starten:  succeeded
    Sep 27 05:47:51 localhost autofs: automount startup succeeded
    Sep 27 05:47:52 localhost mDNSResponder: Starten von  succeeded
    Sep 27 05:47:53 localhost smartd: Starten von smartd failed
    //### Kommentar von mir: dieser Fehler kommt erst seit gestern!
    Sep 27 05:47:53 localhost acpid: Starten von acpid succeeded
    Sep 27 05:47:57 localhost cups: Starten von cupsd succeeded
    Sep 27 05:47:58 localhost sshd:  succeeded
    Sep 27 05:47:58 localhost xinetd: Starten von xinetd succeeded
    Sep 27 05:48:04 localhost sendmail: Starten von sendmail succeeded
    Sep 27 05:48:05 localhost sendmail: Starten von sm-client succeeded
    Sep 27 05:48:05 localhost gpm: Starten von gpm succeeded
    Sep 27 05:48:05 localhost crond: Starten von crond succeeded
    Sep 27 05:48:07 localhost xfs: Starten von xfs succeeded
    Sep 27 05:48:07 localhost anacron: Starten von anacron succeeded
    Sep 27 05:48:08 localhost atd: Starten von atd succeeded
    Sep 27 05:48:08 localhost readahead: Hintergrund-readahead starten: 
    Sep 27 05:48:09 localhost rc: readahead starten:  succeeded
    Sep 27 05:48:09 localhost messagebus: Starten von messagebus succeeded
    Sep 27 05:48:09 localhost cups-config-daemon: Starten von cups-config-daemon succeeded
    Sep 27 05:48:09 localhost haldaemon: Starten von haldaemon succeeded
    Sep 27 05:48:10 localhost wine: Registering binary handler for Windows applications
    Sep 27 05:48:10 localhost rc: wine starten:  succeeded
    Sep 27 16:03:50 localhost NET: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
    
    CRON LOG:
    Sep 27 05:48:05 localhost crond[2265]: (CRON) STARTUP (V5.0)
    Sep 27 05:48:07 localhost anacron[2301]: Anacron 2.3 started on 2005-09-27
    Sep 27 05:48:09 localhost anacron[2301]: Will run job `cron.daily' in 65 min.
    Sep 27 05:48:09 localhost anacron[2301]: Jobs will be executed sequentially
    Sep 27 06:14:20 localhost crond[3265]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 06:53:07 localhost anacron[2301]: Job `cron.daily' started
    Sep 27 06:54:40 localhost anacron[3765]: Updated timestamp for job `cron.daily' to 2005-09-27
    Sep 27 07:01:01 localhost crond[3959]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 07:38:59 localhost anacron[2301]: Job `cron.daily' terminated
    Sep 27 07:38:59 localhost anacron[2301]: Normal exit (1 jobs run)
    Sep 27 08:01:01 localhost crond[4844]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 09:01:01 localhost crond[5612]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 10:01:01 localhost crond[6379]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 11:01:01 localhost crond[7147]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 12:01:01 localhost crond[7914]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 13:01:01 localhost crond[8682]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 14:01:01 localhost crond[9449]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 15:01:01 localhost crond[10217]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 16:01:02 localhost crond[10984]: (root) CMD (run-parts /etc/cron.hourly)
    Sep 27 16:22:44 localhost crontab[11567]: (frank) LIST (frank)
    
    KERNEL START-LOG:
    Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
     BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
     BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
     BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
     BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
     BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    1023MB LOWMEM available.
    zapping low mappings.
    On node 0 totalpages: 262128
      DMA zone: 4096 pages, LIFO batch:1
      Normal zone: 258032 pages, LIFO batch:16
      HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 Nvidia                                ) @ 0x000f76f0
    ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
    ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0
    ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0x3fff94c0
    ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff95c0
    ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff9400
    ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x4008
    Built 1 zonelists
    Kernel command line: ro root=LABEL=/ rhgb quiet
    mapped 4G/4G trampoline to ffff4000.
    Initializing CPU#0
    CPU 0 irqstacks, hard=023d5000 soft=023d4000
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 2070.536 MHz processor.
    Using tsc for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
    Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
    Memory: 1034184k/1048512k available (2068k kernel code, 13568k reserved, 647k data, 144k init, 0k highmem)
    Calibrating delay loop... 4104.19 BogoMIPS (lpj=2052096)
    Security Scaffold v1.0.0 initialized
    SELinux:  Initializing.
    SELinux:  Starting in permissive mode
    There is already a security framework initialized, register_security failed.
    selinux_register_security:  Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000
    CPU: After vendor identify, caps:  078bfbff e3d3fbff 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: After all inits, caps:        078bf3ff e3d3fbff 00000000 00000010
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    ACPI: IRQ9 SCI: Edge set to Level Trigger.
    checking if image is initramfs... it is
    Freeing initrd memory: 470k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 3.00 entry at 0xfba10, last bus=5
    PCI: Using MMCONFIG
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20040816
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Transparent bridge - 0000:00:09.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
    ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
    ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
    ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 3
    ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 3 (level, low) -> IRQ 3
    ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
    ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
    ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt Link [LACI] enabled at IRQ 5
    ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11
    ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5
    ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 3
    ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 3 (level, low) -> IRQ 3
    ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 3
    ACPI: PCI interrupt 0000:05:07.0[A] -> GSI 3 (level, low) -> IRQ 3
    ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    apm: overridden by ACPI.
    audit: initializing netlink socket (disabled)
    audit(1127800012.917:0): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux:  Registering netfilter hooks
    Initializing Cryptographic API
    ksign: Installing public key data
    Loading keyring
    - Added public key 6ECDA687281A73E5
    - User ID: Red Hat, Inc. (Kernel Module GPG key)
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    vesafb: probe of vesafb0 failed with error -6
    ACPI: Fan [FAN] (on)
    ACPI: Processor [CPU0] (supports C1)
    ACPI: Thermal Zone [THRM] (40 C)
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12
    Linux agpgart interface v0.100 (c) Dave Jones
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    divert: not allocating divert_blk for non-ethernet device lo
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
    NFORCE-CK804: chipset revision 242
    NFORCE-CK804: not 100% native mode: will probe irqs later
    NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
        ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
        ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
    Probing IDE interface ide0...
    hda: ST340015A, ATA DISK drive
    hdb: ExcelStor Technology`J880, ATA DISK drive
    Using cfq io scheduler
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: LITE-ON LTR-48246K, ATAPI CD/DVD-ROM drive
    hdd: TOSHIBA DVD-ROM SD-M1222, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    ide2: Wait for ready failed before probe !
    Probing IDE interface ide3...
    ide3: Wait for ready failed before probe !
    Probing IDE interface ide4...
    ide4: Wait for ready failed before probe !
    Probing IDE interface ide5...
    ide5: Wait for ready failed before probe !
    hda: max request size: 128KiB
    hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
    hda: cache flushes supported
     hda: hda1 hda2 hda3 hda4 < hda5 >
    hdb: max request size: 1024KiB
    hdb: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
    hdb: cache flushes supported
     hdb:hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hda: DMA disabled
    ide0: reset: success
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    ide0: reset: success
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    end_request: I/O error, dev hdb, sector 0
    Buffer I/O error on device hdb, logical block 0
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    ide0: reset: success
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    ide0: reset: success
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    end_request: I/O error, dev hdb, sector 0
    Buffer I/O error on device hdb, logical block 0
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    ide0: reset: success
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    ide0: reset: success
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    end_request: I/O error, dev hdb, sector 0
    Buffer I/O error on device hdb, logical block 0
     unable to read partition table
    hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    hdd: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33)
    ide-floppy driver 0.99.newide
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard on isa0060/serio0
    input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    NET: Registered protocol family 2
    IP: routing cache hash table of 2048 buckets, 64Kbytes
    TCP: Hash tables configured (established 262144 bind 37449)
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI wakeup devices: 
    HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 
    Freeing unused kernel memory: 144k freed
    SCSI subsystem initialized
    libata version 1.02 loaded.
    sata_nv version 0.03
    ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:07.0 to 64
    ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 11
    ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 11
    ata1: no device found (phy stat 00000000)
    scsi0 : sata_nv
    ata2: no device found (phy stat 00000000)
    scsi1 : sata_nv
    ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 5
    ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 5
    ata3: no device found (phy stat 00000000)
    scsi2 : sata_nv
    ata4: no device found (phy stat 00000000)
    scsi3 : sata_nv
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: hda3: orphan cleanup on readonly fs
    ext3_orphan_cleanup: deleting unreferenced inode 2361491
    ext3_orphan_cleanup: deleting unreferenced inode 2361494
    EXT3-fs: hda3: 2 orphan inodes deleted
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    security:  3 users, 4 roles, 280 types, 16 bools
    security:  53 classes, 5494 rules
    SELinux:  Completing initialization.
    SELinux:  Setting up existing superblocks.
    SELinux: initialized (dev hda3, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    inserting floppy driver for 2.6.9-1.667
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29.
    ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 3 (level, low) -> IRQ 3
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    divert: allocating divert_blk for eth0
    eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
    ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    intel8x0_measure_ac97_clock: measured 49553 usecs
    intel8x0: clocking to 46791
    ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ehci_hcd 0000:00:02.1: irq 5, pci mem 42878000
    SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    PCI: cache line size of 64 is not supported by device 0000:00:02.1
    ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 10 ports detected
    ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: irq 11, pci mem 428b0000
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 10 ports detected
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device 02369a00(lo)
    IPv6 over IPv4 tunneling driver
    divert: not allocating divert_blk for non-ethernet device sit0
    nvidia: no version for "struct_module" found: kernel tainted.
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: PCI interrupt 0000:05:07.0[A] -> GSI 3 (level, low) -> IRQ 3
    PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7667  Fri Jun 17 07:01:04 PDT 2005
    spurious 8259A interrupt: IRQ7.
    ACPI: Power Button (FF) [PWRF]
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    ide: failed opcode was: unknown
    ide0: reset: success
    EXT3 FS on hda3, internal journal
    device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
    cdrom: open failed.
    cdrom: open failed.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on hda2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev hda2, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    Adding 104380k swap on /dev/hda5.  Priority:-1 extents:1
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    
    SICHERHEITSLOG:
    Sep 27 05:47:58 localhost sshd[2200]: Server listening on :: port 22.
    Sep 27 05:47:58 localhost sshd[2200]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
    Sep 27 16:21:13 localhost userhelper[11537]: pam_timestamp: updated timestamp file `/var/run/sudo/frank/unknown:root'
    Sep 27 16:21:13 localhost userhelper[11541]: running '/usr/share/system-logviewer/system-logviewer.py' with root privileges on behalf of 'frank'
    Sep 27 16:22:30 localhost userhelper[11559]: pam_timestamp: timestamp file `/var/run/sudo/frank/unknown:root' is only 77 seconds old, allowing access to up2date-config for UID 500
    Sep 27 16:22:30 localhost userhelper[11559]: pam_timestamp: updated timestamp file `/var/run/sudo/frank/unknown:root'
    Sep 27 16:22:30 localhost userhelper[11562]: running '/usr/sbin/up2date-config' with root privileges on behalf of 'frank'
    Sep 27 16:23:05 localhost userhelper[11574]: pam_timestamp: timestamp file `/var/run/sudo/frank/unknown:root' is only 35 seconds old, allowing access to gdmsetup for UID 500
    Sep 27 16:23:05 localhost userhelper[11574]: pam_timestamp: updated timestamp file `/var/run/sudo/frank/unknown:root'
    Sep 27 16:23:05 localhost userhelper[11578]: running '/usr/sbin/gdmsetup' with root privileges on behalf of 'frank'
    Sep 27 16:23:22 localhost userhelper[11585]: pam_timestamp: timestamp file `/var/run/sudo/frank/unknown:root' is only 17 seconds old, allowing access to system-config-authentication for UID 500
    Sep 27 16:23:22 localhost userhelper[11585]: pam_timestamp: updated timestamp file `/var/run/sudo/frank/unknown:root'
    Sep 27 16:23:22 localhost userhelper[11588]: running '/usr/share/authconfig/authconfig-gtk.py' with root privileges on behalf of 'frank'
    Sep 27 16:25:16 localhost userhelper[11626]: pam_timestamp: timestamp file `/var/run/sudo/frank/unknown:root' is only 114 seconds old, allowing access to system-logviewer for UID 500
    Sep 27 16:25:16 localhost userhelper[11626]: pam_timestamp: updated timestamp file `/var/run/sudo/frank/unknown:root'
    Sep 27 16:25:16 localhost userhelper[11629]: running '/usr/share/system-logviewer/system-logviewer.py' with root privileges on behalf of 'frank'
    Geändert von Tomek (27.09.05 um 16:01 Uhr) Grund: Bitte in Zukunft die CODE-Tags des Forums benutzen! Danke.

  3. #3
    Registrierter Benutzer
    Registriert seit
    Mar 2004
    Ort
    Erfurt
    Beiträge
    351
    und es geht weiter...

    Code:
    SYSTEMLOG
    Sep 27 05:47:49 localhost syslogd 1.4.1: restart.
    Sep 27 05:47:49 localhost syslog: Starten von syslogd succeeded
    Sep 27 05:47:49 localhost syslog: Starten von klogd succeeded
    Sep 27 05:47:49 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Sep 27 05:47:49 localhost kernel: Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004
    Sep 27 05:47:49 localhost kernel: BIOS-provided physical RAM map:
    Sep 27 05:47:49 localhost kernel:  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    Sep 27 05:47:49 localhost kernel:  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    Sep 27 05:47:49 localhost kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    Sep 27 05:47:49 localhost kernel:  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    Sep 27 05:47:49 localhost kernel:  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    Sep 27 05:47:49 localhost kernel:  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    Sep 27 05:47:49 localhost kernel:  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    Sep 27 05:47:49 localhost kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    Sep 27 05:47:50 localhost kernel: 0MB HIGHMEM available.
    Sep 27 05:47:50 localhost kernel: 1023MB LOWMEM available.
    Sep 27 05:47:50 localhost kernel: zapping low mappings.
    Sep 27 05:47:50 localhost irqbalance: Starten von irqbalance succeeded
    Sep 27 05:47:50 localhost kernel: DMI 2.3 present.
    Sep 27 05:47:50 localhost portmap: Starten von portmap succeeded
    Sep 27 05:47:50 localhost kernel: ACPI: PM-Timer IO Port: 0x4008
    Sep 27 05:47:50 localhost kernel: Built 1 zonelists
    Sep 27 05:47:50 localhost kernel: Kernel command line: ro root=LABEL=/ rhgb quiet
    Sep 27 05:47:50 localhost kernel: mapped 4G/4G trampoline to ffff4000.
    Sep 27 05:47:50 localhost kernel: Initializing CPU#0
    Sep 27 05:47:50 localhost kernel: CPU 0 irqstacks, hard=023d5000 soft=023d4000
    Sep 27 05:47:50 localhost kernel: PID hash table entries: 4096 (order: 12, 65536 bytes)
    Sep 27 05:47:50 localhost kernel: Detected 2070.536 MHz processor.
    Sep 27 05:47:50 localhost kernel: Using tsc for high-res timesource
    Sep 27 05:47:50 localhost kernel: Console: colour VGA+ 80x25
    Sep 27 05:47:50 localhost kernel: Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
    Sep 27 05:47:50 localhost kernel: Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
    Sep 27 05:47:50 localhost kernel: Memory: 1034184k/1048512k available (2068k kernel code, 13568k reserved, 647k data, 144k init, 0k highmem)
    Sep 27 05:47:50 localhost kernel: Security Scaffold v1.0.0 initialized
    Sep 27 05:47:50 localhost kernel: SELinux:  Initializing.
    Sep 27 05:47:50 localhost kernel: SELinux:  Starting in permissive mode
    Sep 27 05:47:50 localhost kernel: There is already a security framework initialized, register_security failed.
    Sep 27 05:47:50 localhost kernel: selinux_register_security:  Registering secondary module capability
    Sep 27 05:47:50 localhost kernel: Capability LSM initialized as secondary
    Sep 27 05:47:50 localhost kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Sep 27 05:47:50 localhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    Sep 27 05:47:50 localhost kernel: CPU: L2 Cache: 512K (64 bytes/line)
    Sep 27 05:47:50 localhost kernel: Intel machine check architecture supported.
    Sep 27 05:47:50 localhost kernel: Intel machine check reporting enabled on CPU#0.
    Sep 27 05:47:50 localhost kernel: CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
    Sep 27 05:47:50 localhost kernel: Enabling fast FPU save and restore... done.
    Sep 27 05:47:50 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
    Sep 27 05:47:50 localhost kernel: Checking 'hlt' instruction... OK.
    Sep 27 05:47:50 localhost kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
    Sep 27 05:47:50 localhost kernel: checking if image is initramfs... it is
    Sep 27 05:47:50 localhost kernel: Freeing initrd memory: 470k freed
    Sep 27 05:47:50 localhost kernel: NET: Registered protocol family 16
    Sep 27 05:47:50 localhost kernel: PCI: PCI BIOS revision 3.00 entry at 0xfba10, last bus=5
    Sep 27 05:47:50 localhost kernel: PCI: Using MMCONFIG
    Sep 27 05:47:50 localhost kernel: mtrr: v2.0 (20020519)
    Sep 27 05:47:50 localhost kernel: ACPI: Subsystem revision 20040816
    Sep 27 05:47:50 localhost kernel: ACPI: Interpreter enabled
    Sep 27 05:47:50 localhost kernel: ACPI: Using PIC for interrupt routing
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
    Sep 27 05:47:50 localhost kernel: PCI: Probing PCI hardware (bus 00)
    Sep 27 05:47:50 localhost rpc.statd[1995]: Version 1.0.6 Starting
    Sep 27 05:47:50 localhost kernel: PCI: Transparent bridge - 0000:00:09.0
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    Sep 27 05:47:50 localhost nfslock: Starten von rpc.statd succeeded
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
    Sep 27 05:47:50 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
    Sep 27 05:47:50 localhost kernel: usbcore: registered new driver usbfs
    Sep 27 05:47:50 localhost kernel: usbcore: registered new driver hub
    Sep 27 05:47:50 localhost kernel: PCI: Using ACPI for IRQ routing
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 3
    Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 3 (level, low) -> IRQ 3
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
    Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
    Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LACI] enabled at IRQ 5
    Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11
    Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5
    Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 3
    Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 3 (level, low) -> IRQ 3
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 3
    Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:05:07.0[A] -> GSI 3 (level, low) -> IRQ 3
    Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
    Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    Sep 27 05:47:50 localhost kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    Sep 27 05:47:50 localhost kernel: apm: overridden by ACPI.
    Sep 27 05:47:50 localhost kernel: audit: initializing netlink socket (disabled)
    Sep 27 05:47:50 localhost kernel: audit(1127800012.917:0): initialized
    Sep 27 05:47:50 localhost kernel: Total HugeTLB memory allocated, 0
    Sep 27 05:47:50 localhost kernel: VFS: Disk quotas dquot_6.5.1
    Sep 27 05:47:50 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Sep 27 05:47:50 localhost kernel: SELinux:  Registering netfilter hooks
    Sep 27 05:47:50 localhost kernel: Initializing Cryptographic API
    Sep 27 05:47:50 localhost kernel: ksign: Installing public key data
    Sep 27 05:47:50 localhost kernel: Loading keyring
    Sep 27 05:47:50 localhost kernel: - Added public key 6ECDA687281A73E5
    Sep 27 05:47:50 localhost kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
    Sep 27 05:47:50 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Sep 27 05:47:50 localhost kernel: vesafb: probe of vesafb0 failed with error -6
    Sep 27 05:47:50 localhost kernel: ACPI: Fan [FAN] (on)
    Sep 27 05:47:50 localhost kernel: ACPI: Processor [CPU0] (supports C1)
    Sep 27 05:47:50 localhost kernel: ACPI: Thermal Zone [THRM] (40 C)
    Sep 27 05:47:50 localhost kernel: isapnp: Scanning for PnP cards...
    Sep 27 05:47:50 localhost kernel: isapnp: No Plug & Play device found
    Sep 27 05:47:50 localhost kernel: Real Time Clock Driver v1.12
    Sep 27 05:47:50 localhost kernel: Linux agpgart interface v0.100 (c) Dave Jones
    Sep 27 05:47:50 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Sep 27 05:47:51 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Sep 27 05:47:51 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
    Sep 27 05:47:51 localhost rpcidmapd: Starten von rpc.idmapd succeeded
    Sep 27 05:47:51 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Sep 27 05:47:51 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    Sep 27 05:47:51 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    Sep 27 05:47:51 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Sep 27 05:47:51 localhost kernel: NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
    Sep 27 05:47:51 localhost kernel: NFORCE-CK804: chipset revision 242
    Sep 27 05:47:51 localhost kernel: NFORCE-CK804: not 100%% native mode: will probe irqs later
    Sep 27 05:47:51 localhost kernel: NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
    Sep 27 05:47:51 localhost kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    Sep 27 05:47:51 localhost kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
    Sep 27 05:47:51 localhost kernel: hda: ST340015A, ATA DISK drive
    Sep 27 05:47:51 localhost kernel: hdb: ExcelStor Technology`J880, ATA DISK drive
    Sep 27 05:47:51 localhost kernel: Using cfq io scheduler
    Sep 27 05:47:51 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Sep 27 05:47:51 localhost kernel: hdc: LITE-ON LTR-48246K, ATAPI CD/DVD-ROM drive
    Sep 27 05:47:51 localhost kernel: hdd: TOSHIBA DVD-ROM SD-M1222, ATAPI CD/DVD-ROM drive
    Sep 27 05:47:51 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
    Sep 27 05:47:51 localhost kernel: hda: max request size: 128KiB
    Sep 27 05:47:51 localhost kernel: hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
    Sep 27 05:47:51 localhost kernel:  hda: hda1 hda2 hda3 hda4 < hda5 >
    Sep 27 05:47:51 localhost kernel: hdb: max request size: 1024KiB
    Sep 27 05:47:51 localhost kernel: hdb: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
    Sep 27 05:47:51 localhost kernel:  hdb:hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hda: DMA disabled
    Sep 27 05:47:51 localhost kernel: ide0: reset: success
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: ide0: reset: success
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: end_request: I/O error, dev hdb, sector 0
    Sep 27 05:47:51 localhost kernel: Buffer I/O error on device hdb, logical block 0
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:44 localhost rc: readahead_early starten:  succeeded 
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost netfs: Andere Dateisysteme einhängen:  succeeded
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: ide0: reset: success
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: ide0: reset: success
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost rc: lm_sensors starten:  succeeded
    Sep 27 05:47:51 localhost kernel: end_request: I/O error, dev hdb, sector 0
    Sep 27 05:47:51 localhost kernel: Buffer I/O error on device hdb, logical block 0
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost autofs: automount startup succeeded
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:52 localhost kernel: ide0: reset: success
    Sep 27 05:47:52 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:52 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:52 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:52 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:52 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:52 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:52 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:52 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:52 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:52 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:52 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:52 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:52 localhost kernel: ide0: reset: success
    Sep 27 05:47:52 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:52 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:52 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:52 localhost kernel: end_request: I/O error, dev hdb, sector 0
    Sep 27 05:47:52 localhost kernel: Buffer I/O error on device hdb, logical block 0
    Sep 27 05:47:52 localhost kernel:  unable to read partition table
    Sep 27 05:47:52 localhost kernel: hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Sep 27 05:47:52 localhost kernel: Uniform CD-ROM driver Revision: 3.20
    Sep 27 05:47:52 localhost kernel: hdd: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33)
    Sep 27 05:47:52 localhost kernel: ide-floppy driver 0.99.newide
    Sep 27 05:47:52 localhost kernel: usbcore: registered new driver hiddev
    Sep 27 05:47:52 localhost kernel: usbcore: registered new driver usbhid
    Sep 27 05:47:52 localhost kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    Sep 27 05:47:52 localhost kernel: mice: PS/2 mouse device common for all mice
    Sep 27 05:47:52 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
    Sep 27 05:47:52 localhost kernel: input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
    Sep 27 05:47:52 localhost kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    Sep 27 05:47:52 localhost kernel: NET: Registered protocol family 2
    Sep 27 05:47:52 localhost kernel: IP: routing cache hash table of 2048 buckets, 64Kbytes
    Sep 27 05:47:52 localhost kernel: TCP: Hash tables configured (established 262144 bind 37449)
    Sep 27 05:47:52 localhost kernel: Initializing IPsec netlink socket
    Sep 27 05:47:52 localhost kernel: NET: Registered protocol family 1
    Sep 27 05:47:52 localhost kernel: NET: Registered protocol family 17
    Sep 27 05:47:52 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5)
    Sep 27 05:47:52 localhost kernel: ACPI wakeup devices: 
    Sep 27 05:47:52 localhost kernel: HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 
    Sep 27 05:47:52 localhost kernel: Freeing unused kernel memory: 144k freed
    Sep 27 05:47:52 localhost kernel: SCSI subsystem initialized
    Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11
    Sep 27 05:47:52 localhost kernel: ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 11
    Sep 27 05:47:52 localhost kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 11
    Sep 27 05:47:52 localhost kernel: ata1: no device found (phy stat 00000000)
    Sep 27 05:47:52 localhost kernel: scsi0 : sata_nv
    Sep 27 05:47:52 localhost kernel: ata2: no device found (phy stat 00000000)
    Sep 27 05:47:52 localhost kernel: scsi1 : sata_nv
    Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
    Sep 27 05:47:52 localhost kernel: ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 5
    Sep 27 05:47:52 localhost kernel: ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 5
    Sep 27 05:47:52 localhost kernel: ata3: no device found (phy stat 00000000)
    Sep 27 05:47:52 localhost kernel: scsi2 : sata_nv
    Sep 27 05:47:52 localhost kernel: ata4: no device found (phy stat 00000000)
    Sep 27 05:47:52 localhost kernel: scsi3 : sata_nv
    Sep 27 05:47:52 localhost kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
    Sep 27 05:47:52 localhost kernel: EXT3-fs: write access will be enabled during recovery.
    Sep 27 05:47:52 localhost kernel: kjournald starting.  Commit interval 5 seconds
    Sep 27 05:47:52 localhost kernel: EXT3-fs: hda3: orphan cleanup on readonly fs
    Sep 27 05:47:52 localhost kernel: EXT3-fs: hda3: 2 orphan inodes deleted
    Sep 27 05:47:52 localhost kernel: EXT3-fs: recovery complete.
    Sep 27 05:47:52 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
    Sep 27 05:47:52 localhost kernel: security:  3 users, 4 roles, 280 types, 16 bools
    Sep 27 05:47:52 localhost kernel: security:  53 classes, 5494 rules
    Sep 27 05:47:52 localhost kernel: SELinux:  Completing initialization.
    Sep 27 05:47:52 localhost kernel: SELinux:  Setting up existing superblocks.
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev hda3, type ext3), uses xattr
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev proc, type proc), uses genfs_contexts
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    Sep 27 05:47:52 localhost kernel: inserting floppy driver for 2.6.9-1.667
    Sep 27 05:47:52 localhost kernel: Floppy drive(s): fd0 is 1.44M
    Sep 27 05:47:52 localhost kernel: FDC 0 is a post-1991 82077
    Sep 27 05:47:52 localhost kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29.
    Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 3 (level, low) -> IRQ 3
    Sep 27 05:47:52 localhost kernel: eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
    Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5
    Sep 27 05:47:52 localhost kernel: intel8x0_measure_ac97_clock: measured 49553 usecs
    Sep 27 05:47:52 localhost kernel: intel8x0: clocking to 46791
    Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
    Sep 27 05:47:52 localhost kernel: ehci_hcd 0000:00:02.1: EHCI Host Controller
    Sep 27 05:47:52 localhost kernel: ehci_hcd 0000:00:02.1: irq 5, pci mem 42878000
    Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
    Sep 27 05:47:52 localhost kernel: ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    Sep 27 05:47:52 localhost kernel: ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    Sep 27 05:47:52 localhost kernel: hub 1-0:1.0: USB hub found
    Sep 27 05:47:52 localhost kernel: hub 1-0:1.0: 10 ports detected
    Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
    Sep 27 05:47:52 localhost mDNSResponder: Starten von  succeeded
    Sep 27 05:47:52 localhost kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
    Sep 27 05:47:53 localhost kernel: ohci_hcd 0000:00:02.0: irq 11, pci mem 428b0000
    Sep 27 05:47:53 localhost kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    Sep 27 05:47:53 localhost kernel: hub 2-0:1.0: USB hub found
    Sep 27 05:47:53 localhost kernel: hub 2-0:1.0: 10 ports detected
    Sep 27 05:47:53 localhost kernel: md: Autodetecting RAID arrays.
    Sep 27 05:47:53 localhost kernel: md: autorun ...
    Sep 27 05:47:53 localhost smartd[2138]: smartd version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen 
    Sep 27 05:47:53 localhost kernel: md: ... autorun DONE.
    Sep 27 05:47:53 localhost smartd[2138]: Home page is http://smartmontools.sourceforge.net/  
    Sep 27 05:47:53 localhost kernel: SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    Sep 27 05:47:53 localhost smartd[2138]: Opened configuration file /etc/smartd.conf 
    Sep 27 05:47:53 localhost kernel: NET: Registered protocol family 10
    Sep 27 05:47:53 localhost kernel: Disabled Privacy Extensions on device 02369a00(lo)
    Sep 27 05:47:53 localhost smartd[2138]: Configuration file /etc/smartd.conf parsed. 
    Sep 27 05:47:53 localhost kernel: IPv6 over IPv4 tunneling driver
    Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hda, opened 
    Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hda, not found in smartd database. 
    Sep 27 05:47:53 localhost kernel: nvidia: no version for "struct_module" found: kernel tainted.
    Sep 27 05:47:53 localhost kernel: nvidia: module license 'NVIDIA' taints kernel.
    Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hda, is SMART capable. Adding to "monitor" list. 
    Sep 27 05:47:53 localhost kernel: ACPI: PCI interrupt 0000:05:07.0[A] -> GSI 3 (level, low) -> IRQ 3
    Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hdb, opened 
    Sep 27 05:47:53 localhost kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
    Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hdb, not found in smartd database. 
    Sep 27 05:47:53 localhost kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hdb, ATA IDENTIFY DEVICE words 82-83 don't specify if SMART capable. 
    Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hdb, to proceed anyway, use '-T permissive' Directive. 
    Sep 27 05:47:53 localhost kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7667  Fri Jun 17 07:01:04 PDT 2005
    Sep 27 05:47:53 localhost smartd[2138]: Unable to register ATA device /dev/hdb at line 2 of file /etc/smartd.conf 
    Sep 27 05:47:53 localhost smartd[2138]: Unable to register device /dev/hdb (no Directive -d removable). Exiting. 
    Sep 27 05:47:53 localhost kernel: ACPI: Power Button (FF) [PWRF]
    Sep 27 05:47:53 localhost smartd: Starten von smartd failed
    Sep 27 05:47:53 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:53 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:53 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:53 localhost acpid: Starten von acpid succeeded
    Sep 27 05:47:54 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:54 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:54 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:54 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:54 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:54 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:54 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:54 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:54 localhost kernel: ide: failed opcode was: unknown
    Sep 27 05:47:54 localhost kernel: ide0: reset: success
    Sep 27 05:47:54 localhost kernel: EXT3 FS on hda3, internal journal
    Sep 27 05:47:54 localhost kernel: device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
    
    // ## da ich immer noch zu viele zeichen habe, geht der log beim nächstem post weiter...
    Geändert von Tomek (27.09.05 um 16:02 Uhr) Grund: Bitte in Zukunft die CODE-Tags des Forums benutzen! Danke.

  4. #4
    Registrierter Benutzer
    Registriert seit
    Mar 2004
    Ort
    Erfurt
    Beiträge
    351
    und das ist der zweite teil:
    Code:
    Sep 27 05:47:54 localhost kernel: cdrom: open failed.
    Sep 27 05:47:54 localhost kernel: cdrom: open failed.
    Sep 27 05:47:54 localhost kernel: kjournald starting.  Commit interval 5 seconds
    Sep 27 05:47:54 localhost kernel: EXT3 FS on hda2, internal journal
    Sep 27 05:47:54 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
    Sep 27 05:47:54 localhost kernel: SELinux: initialized (dev hda2, type ext3), uses xattr
    Sep 27 05:47:54 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    Sep 27 05:47:54 localhost kernel: Adding 104380k swap on /dev/hda5.  Priority:-1 extents:1
    Sep 27 05:47:54 localhost kernel: SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    Sep 27 05:47:54 localhost kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
    Sep 27 05:47:54 localhost kernel: parport0: irq 7 detected
    Sep 27 05:47:54 localhost kernel: SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
    Sep 27 05:47:54 localhost kernel: i2c /dev entries driver
    Sep 27 05:47:57 localhost kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
    Sep 27 05:47:57 localhost kernel: parport0: irq 7 detected
    Sep 27 05:47:57 localhost kernel: lp0: using parport0 (polling).
    Sep 27 05:47:57 localhost kernel: lp0: console ready
    Sep 27 05:47:57 localhost cups: Starten von cupsd succeeded
    Sep 27 05:47:58 localhost sshd:  succeeded
    Sep 27 05:47:58 localhost xinetd: Starten von xinetd succeeded
    Sep 27 05:47:58 localhost xinetd[2211]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
    Sep 27 05:47:58 localhost xinetd[2211]: Started working: 0 available services
    Sep 27 05:48:04 localhost sendmail: Starten von sendmail succeeded
    Sep 27 05:48:05 localhost sendmail: Starten von sm-client succeeded
    Sep 27 05:48:05 localhost gpm[2255]: *** info [startup.c(95)]: 
    Sep 27 05:48:05 localhost gpm[2255]: Started gpm successfully. Entered daemon mode.
    Sep 27 05:48:05 localhost gpm[2255]: *** info [mice.c(1766)]: 
    Sep 27 05:48:05 localhost gpm[2255]: imps2: Auto-detected intellimouse PS/2
    Sep 27 05:48:05 localhost gpm: Starten von gpm succeeded
    Sep 27 05:48:05 localhost crond: Starten von crond succeeded
    Sep 27 05:48:07 localhost xfs: Starten von xfs succeeded
    Sep 27 05:48:07 localhost xfs[2291]: ignoring font path element /usr/X11R6/lib/X11/fonts/Speedo (unreadable) 
    Sep 27 05:48:07 localhost anacron: Starten von anacron succeeded
    Sep 27 05:48:08 localhost atd: Starten von atd succeeded
    Sep 27 05:48:08 localhost readahead: Hintergrund-readahead starten: 
    Sep 27 05:48:09 localhost rc: readahead starten:  succeeded
    Sep 27 05:48:09 localhost messagebus: Starten von messagebus succeeded
    Sep 27 05:48:09 localhost cups-config-daemon: Starten von cups-config-daemon succeeded
    Sep 27 05:48:09 localhost haldaemon: Starten von haldaemon succeeded
    Sep 27 05:48:10 localhost wine: Registering binary handler for Windows applications
    Sep 27 05:48:10 localhost fstab-sync[2366]: removed all generated mount points
    Sep 27 05:48:10 localhost rc: wine starten:  succeeded
    Sep 27 05:48:15 localhost fstab-sync[2945]: added mount point /media/cdrom for /dev/hdd
    Sep 27 05:48:16 localhost fstab-sync[2954]: added mount point /media/cdrecorder for /dev/hdc
    Sep 27 05:48:17 localhost gdm-autologin(pam_unix)[2878]: session opened for user frank by (uid=0)
    Sep 27 05:48:19 localhost fstab-sync[3076]: added mount point /media/floppy for /dev/fd0
    Sep 27 05:48:56 localhost gconfd (frank-3198): (Version 2.8.1) wird gestartet, Prozesskennung 3198, Benutzer »frank«
    Sep 27 05:48:57 localhost gconfd (frank-3198): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
    Sep 27 05:48:57 localhost gconfd (frank-3198): Die Adresse »xml:readwrite:/home/frank/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
    Sep 27 05:48:57 localhost gconfd (frank-3198): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
    Sep 27 06:13:21 localhost crond(pam_unix)[3264]: session opened for user root by (uid=0)
    Sep 27 06:25:28 localhost crond(pam_unix)[3264]: session closed for user root
    Sep 27 06:43:31 localhost kernel: oom-killer: gfp_mask=0x1d2
    Sep 27 06:43:31 localhost kernel: DMA per-cpu:
    Sep 27 06:43:31 localhost kernel: cpu 0 hot: low 2, high 6, batch 1
    Sep 27 06:43:31 localhost kernel: cpu 0 cold: low 0, high 2, batch 1
    Sep 27 06:43:31 localhost kernel: Normal per-cpu:
    Sep 27 06:43:31 localhost kernel: cpu 0 hot: low 32, high 96, batch 16
    Sep 27 06:43:31 localhost kernel: cpu 0 cold: low 0, high 32, batch 16
    Sep 27 06:43:31 localhost kernel: HighMem per-cpu: empty
    Sep 27 06:43:31 localhost kernel: 
    Sep 27 06:43:31 localhost kernel: Free pages:        1076kB (0kB HighMem)
    Sep 27 06:43:31 localhost kernel: Active:126442 inactive:124971 dirty:0 writeback:1 unstable:0 free:269 slab:3128 mapped:250643 pagetables:909
    Sep 27 06:43:31 localhost kernel: DMA free:12kB min:12kB low:24kB high:36kB active:10804kB inactive:1976kB present:16384kB
    Sep 27 06:43:31 localhost kernel: protections[]: 0 0 0
    Sep 27 06:43:33 localhost kernel: Normal free:1064kB min:1004kB low:2008kB high:3012kB active:494964kB inactive:497908kB present:1032128kB
    Sep 27 06:43:33 localhost kernel: protections[]: 0 0 0
    Sep 27 06:43:34 localhost kernel: HighMem free:0kB min:128kB low:256kB high:384kB active:0kB inactive:0kB present:0kB
    Sep 27 06:43:35 localhost kernel: protections[]: 0 0 0
    Sep 27 06:43:35 localhost kernel: DMA: 1*4kB 1*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 12kB
    Sep 27 06:43:36 localhost kernel: Normal: 0*4kB 1*8kB 0*16kB 1*32kB 2*64kB 1*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1064kB
    Sep 27 06:43:36 localhost kernel: HighMem: empty
    Sep 27 06:43:36 localhost kernel: Swap cache: add 30444, delete 30444, find 169/708, race 0+0
    Sep 27 06:43:37 localhost kernel: Out of Memory: Killed process 2237 (foomatic-rip).
    Sep 27 07:01:01 localhost crond(pam_unix)[3958]: session opened for user root by (uid=0)
    Sep 27 07:01:01 localhost crond(pam_unix)[3958]: session closed for user root
    Sep 27 08:01:01 localhost crond(pam_unix)[4843]: session opened for user root by (uid=0)
    Sep 27 08:01:02 localhost crond(pam_unix)[4843]: session closed for user root
    Sep 27 09:01:01 localhost crond(pam_unix)[5611]: session opened for user root by (uid=0)
    Sep 27 09:01:01 localhost crond(pam_unix)[5611]: session closed for user root
    Sep 27 10:01:01 localhost crond(pam_unix)[6378]: session opened for user root by (uid=0)
    Sep 27 10:01:01 localhost crond(pam_unix)[6378]: session closed for user root
    Sep 27 11:01:01 localhost crond(pam_unix)[7146]: session opened for user root by (uid=0)
    Sep 27 11:01:01 localhost crond(pam_unix)[7146]: session closed for user root
    Sep 27 12:01:01 localhost crond(pam_unix)[7913]: session opened for user root by (uid=0)
    Sep 27 12:01:01 localhost crond(pam_unix)[7913]: session closed for user root
    Sep 27 13:01:01 localhost crond(pam_unix)[8681]: session opened for user root by (uid=0)
    Sep 27 13:01:01 localhost crond(pam_unix)[8681]: session closed for user root
    Sep 27 14:01:01 localhost crond(pam_unix)[9448]: session opened for user root by (uid=0)
    Sep 27 14:01:01 localhost crond(pam_unix)[9448]: session closed for user root
    Sep 27 15:01:01 localhost crond(pam_unix)[10216]: session opened for user root by (uid=0)
    Sep 27 15:01:01 localhost crond(pam_unix)[10216]: session closed for user root
    Sep 27 16:01:02 localhost crond(pam_unix)[10983]: session opened for user root by (uid=0)
    Sep 27 16:01:02 localhost crond(pam_unix)[10983]: session closed for user root
    Sep 27 16:03:19 localhost su(pam_unix)[11083]: session opened for user root by frank(uid=500)
    Sep 27 16:03:44 localhost su[11083]: Warning!  Could not relabel  with user_u:object_r:devpts_t, not relabeling. 
    Sep 27 16:03:44 localhost su(pam_unix)[11083]: session closed for user root
    Sep 27 16:03:48 localhost kernel: CSLIP: code copyright 1989 Regents of the University of California
    Sep 27 16:03:48 localhost kernel: PPP generic driver version 2.4.2
    Sep 27 16:03:49 localhost pppd[11174]: pppd 2.4.2 started by root, uid 0
    Sep 27 16:03:49 localhost pppd[11174]: Using interface ppp0
    Sep 27 16:03:49 localhost pppd[11174]: Connect: ppp0 <--> /dev/pts/2
    Sep 27 16:03:49 localhost pppoe[11179]: PPP session is 4747
    Sep 27 16:03:50 localhost pppd[11174]: CHAP authentication succeeded: CHAP authentication success, unit 180
    Sep 27 16:03:50 localhost pppd[11174]: local  IP address 84.59.239.98
    Sep 27 16:03:50 localhost pppd[11174]: remote IP address 84.59.224.1
    Sep 27 16:03:50 localhost pppd[11174]: primary   DNS address 195.50.140.252
    Sep 27 16:03:50 localhost pppd[11174]: secondary DNS address 145.253.2.75
    Sep 27 16:03:50 localhost NET: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
    Sep 27 16:04:00 localhost kernel: application firefox-bin uses obsolete OSS audio interface
    Sep 27 16:23:05 localhost gconfd (root-11580): (Version 2.8.1) wird gestartet, Prozesskennung 11580, Benutzer »root«
    Sep 27 16:23:05 localhost gconfd (root-11580): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
    Sep 27 16:23:05 localhost gconfd (root-11580): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
    Sep 27 16:23:05 localhost gconfd (root-11580): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
    Geändert von Tomek (27.09.05 um 16:03 Uhr) Grund: Bitte in Zukunft die CODE-Tags des Forums benutzen! Danke.

  5. #5
    Bill Hates Avatar von winni_puh
    Registriert seit
    Jan 2005
    Ort
    Sulzbach-Rosenberg
    Beiträge
    740
    Ich kann dir leider nicht bei deinem Problem helfen, aber sooo lange Logs packt man in ein CODE und Zitiert die nicht!

    winni_puh

  6. #6
    Besen-Wesen Avatar von Ginsengelf
    Registriert seit
    Feb 2003
    Ort
    Mars
    Beiträge
    564
    Moin, das System scheint irgendwo auf hdb schreiben zu wollen, was fehlschlägt:
    Code:
    Sep 27 05:47:51 localhost kernel: hdb: max request size: 1024KiB
    Sep 27 05:47:51 localhost kernel: hdb: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
    Sep 27 05:47:51 localhost kernel: hdb:hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
    Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown
    aber frag mich nicht nach einem Grund, evtl. Platte defekt?

    Ginsengelf
    God's in his heaven. All's right with the world.
    System: Phenom II X6 auf Asus M5A97 Pro, AMD Vega, 8 GB DDR3-RAM, openSUSE Tumbleweed

  7. #7
    Registrierter Benutzer
    Registriert seit
    Mar 2004
    Ort
    Erfurt
    Beiträge
    351
    hdb ist meine zweite festplatte, die mit fat32 formatiert ist. aber die hatte er nicht erkannt, bzw. konnte nicht auf ihr lesen + schreiben. den grund weiß ich bis heut nicht, aber ich nehme an, dass es an der platte liegt. ich habe sie jetzt jedenfalls aus der fstab gestrichen, weil ich diese lästigen fehlermeldungen satt hatte und gebrauche sie jetzt nur für mein windows

    edit: die beiden programme sind nicht unter den diensten aufgeführt, die bei jedem start gestartet werden, das muss also noch irgendwo anders stehen, dass die beiden zum start gestarten werden, denn im autostartordner von kde sind sie nicht...

    edit2: ich glaube ich weiß wo der fehler lag, das hat mich auf die idee gebracht: http://lists.suse.com/archive/suse-l...Dec/2137.html#
    da ich vorher meinen drucker installiert hatte, hatte ich versucht etwas zu drucken und das ging nicht. ich weiß aber nicht mehr, wann das genau war. vielleicht war es genau die sitzung davor, als das anfing. und jetzt will der bei jedem start das ausführen / drucken und es geht nicht, weil er zum einen mit meinem drucker nicht klar kommt (lexmark Z515) und zum anderen weil mein drucker nicht eingeschaltet habe. ich werde mal versuchen, dass in ordnug zu bringen und dann zu resetten. danach werde ich euch bescheid sagen, ob es geklappt hat oder nicht...
    Geändert von Bayerfans04 (27.09.05 um 16:44 Uhr)

  8. #8
    Registrierter Benutzer
    Registriert seit
    Mar 2004
    Ort
    Erfurt
    Beiträge
    351
    kaum zu glauben, es klappt!!!
    tut mir leid, dass ich euch mit meinem müll zugelabert habe, thread kann somit geschlossen werden!


Ähnliche Themen

  1. Zufälliger Bootverlauf...
    Von Uli-0815 im Forum System installieren und konfigurieren
    Antworten: 11
    Letzter Beitrag: 17.03.07, 08:38
  2. Apache2 viele Prozesse
    Von SilverIC3 im Forum Linux Allgemein
    Antworten: 15
    Letzter Beitrag: 31.03.05, 09:47
  3. LAMP System
    Von Langenscheidt im Forum Linux als Server
    Antworten: 6
    Letzter Beitrag: 05.12.04, 12:58
  4. /var/log/boot.msg : failed
    Von verve im Forum System installieren und konfigurieren
    Antworten: 0
    Letzter Beitrag: 01.12.02, 15:46
  5. x11 autostart deaktivieren?
    Von xiuma im Forum X-Konfiguration
    Antworten: 18
    Letzter Beitrag: 28.09.02, 09:14

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •