USB (2.0) Festplatte unter SuSE 9.1 beschreiben geht nicht

[user9999]

Hi Leute,
ich habe mir eine übriggebliebene SATA Festplatte in ein USB 2.0 Gehäuse gebaut, um gelegentlich Backups machen zu können. Die Festplatte wird im Konquereor auch angezeigt (usb-storage-03669562100000000400:0:0:0p1), aber ich kann keine Dateien darauf verschieben bzw. zu erzeugen. Weiß da jemand Rat? Wie bekomme ich Schreibzugriff?
Vielen Dank
Torsten

[Michiru]

Nabend gib mal
cat /etc/fstab
in eine Shell und schreibe hier mal den Output rein.
Ich hoffe bei Suse ist die fstab an dieser Stelle,
ansonsten suche mal die fstab und gib uns den Inhalt
wieder. Vielleicht kann man ja schon durch eine
Modifikation dieser helfen.

greetings Michiru

[benelein]

Kanns sein das die Sata-Festplatte in NTFS formatiert ist?
Wenn es sich um NTFS handelt ist dieses Verhalten normal, da Linux zurzeit noch nicht auf NTFS Platten schreiben kann.
In diesem Falle würde ich die Platte auf ext2 oder 3 formatieren, dann müsst es mim Backup klappen.

[user9999]

@Michiru
/dev/hde6 / ext3 acl,user_xattr 1 1
/dev/hde2 /boot ext3 acl,user_xattr 1 2
/dev/hde9 /data1 auto noauto,user 0 0
/dev/hde7 /home ext3 acl,user_xattr 1 2
/dev/hde1 /windows/C ntfs ro,users,gid=users,umask=0002,nls=iso8859-15 0 0
/dev/hde8 /windows/D vfat users,gid=users,umask=0002,iocharset=iso8859-15 0 0
/dev/hde5 swap swap pri=42 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
proc /proc proc defaults 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
sysfs /sys sysfs noauto 0 0
/dev/dvd /media/dvd subfs fs=auto,ro,procuid,nosuid,nodev,exec,iocharset=iso 8859-15,codepage=850 0 0
/dev/dvdrecorder /media/dvdrecorder subfs fs=auto,ro,procuid,nosuid,nodev,exec,iocharset=iso 8859-15,codepage=850 0 0
/dev/fd0 /media/floppy subfs fs=auto,procuid,nodev,nosuid,sync 0 0
tmpfs /vtx tmpfs size=64m 0 0
tmpfs /dev/shm tmpfs defaults 0 0

@benelein
die Platte war vorher mit NTFS formatiert, aber daran kann es eigentlich nicht liegen, weil (wie oben in der fstab zu sehen) hde1 auch mit NTFS formatiert ist und ich darauf schreiben kann. Trotzdem habe ich die Platte mit ext3 formatiert und bekomme auch keinen Zugriff.
Ich weiß nicht, ob es wichtig ist, aber SuSE 9.1 arbeitet mit so einem Automount. D.h., wenn ich die Festplatte (oder einen USB-Stick) einstecke, dann erscheint automatisch im Konqueror ein Tab mit einem USB-Eintrag (z.B. usb-storage-03669562100000000400:0:0:0p2). Auf den USB-Stick kann ich übrigens zugreifen.

[Ede]

Um Automount zu deaktivieren, muß in /etc/sysconfig/hotplug

HOTPLUG_MOUNT_TYPE="fstab"

und

HOTPLUG_DO_MOUNT="no"

stehen.

[MiGo]

/dev/hde1 /windows/C ntfs ro,users,gid=users,umask=0002,nls=iso8859-15 0 0

Nein, auf hde1 kannst du nicht schreiben. a) Schreiben auf NTFS geht nur mittels captive und b) ist die Platte RO eingehängt.

Was sagt "dmesg" nach dem Einstecken der Platte? Kannst du als Root drauf schreiben (in der Konsole)?

[user9999]

@MiGo
Du hast recht. Ich arbeite sehr selten mit den Windows-Daten unter Linux und nahm an, dass ich Schreibzugriff auf NTFS habe; dem ist aber nicht so. Deshalb habe ich damals eine Datenaustausch-Partition in FAT32 angelegt. Im Übrigen kann ich die Festplatte auch unter Knoppix 3.9 nicht beschreiben, selbst wenn ich den Schreibzugriff extra aktiviere. Kapiere ich immer noch nicht. Ein neues Formatieren unter QT-Partet geht aber z. B..
"dmesg" muss ich heute Abend mal probieren. Ich sitze gerade auf der Arbeit und bin somit nicht am Privat-PC.

[user9999]

so. ich habe "dmesg" mal ausgeführt:
PU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
do_initcalls
init_elf_binfmt
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd847, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
... the first call_usermodehelper: pci_bus
vesafb: framebuffer at 0xd0000000, mapped to 0xf8800000, size 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=50
vesafb: protected mode interface info at c000:575b
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Initial HugeTLB pages allocated: 0
ikconfig 0.7 with /proc/config*
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
SELinux: Registering netfilter hooks
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 52139 bytes, found (1280x1024, 24562 bytes, v3).
Console: switching to colour frame buffer device 147x55
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0
VIA8237SATA: chipset revision 128
VIA8237SATA: 100% native mode on irq 9
ide0: BM-DMA at 0x2c00-0x2c07, BIOS settings: hdaio, hdbio
ide1: BM-DMA at 0x2c08-0x2c0f, BIOS settings: hdcio, hddio
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide2: BM-DMA at 0x2c10-0x2c17, BIOS settings: hdeMA, hdfio
ide3: BM-DMA at 0x2c18-0x2c1f, BIOS settings: hdgMA, hdhMA
hde: Maxtor 7Y250P0, ATA DISK drive
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
hdg: TEAC DV-W58G-A, ATAPI CD/DVD-ROM drive
hdh: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
ide3 at 0x170-0x177,0x376 on irq 15
hde: max request size: 1024KiB
hde: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(133)
hde: hde1 hde2 hde3 < hde5 hde6 hde7 hde8 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
Resume Machine: resuming from /dev/hde5
Resuming from device hde5
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT2-fs warning (device hde6): ext2_fill_super: mounting ext3 filesystem as ext2

VFS: Mounted root (ext2 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
Adding 1052216k swap on /dev/hde5. Priority:42 extents:1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hde2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hde7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS volume version 3.1.
subfs 0.9
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: Maximum main memory to use for agp memory: 940M
agpgart: AGP aperture is 128M @ 0xc8000000
hdg: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdh: ATAPI 48X DVD-ROM drive, 256kB Cache
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03545c0(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8183 buckets, 65464 max) - 296 bytes per conntrack
Disabled Privacy Extensions on device f5555000(sit0)
Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
eth0: ADMtek Comet rev 17 at 0x1000, 00:30:05:6C:20:B3, IRQ 11.
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ff6c:20b3 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=0
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ff6c:20b3 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:0230:05ff:fe6c:20b3 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
bttv: driver version 0.9.13 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bt878: AUDIO driver version 0.0.0 loaded
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 11, io base 00001800
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.4-52-default uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 11, io base 00001c00
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.4-52-default uhci_hcd
usb usb2: SerialNumber: 0000:00:10.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 11, io base 00002000
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.4-52-default uhci_hcd
usb usb3: SerialNumber: 0000:00:10.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: irq 11, io base 00002400
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.4-52-default uhci_hcd
usb usb4: SerialNumber: 0000:00:10.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using address 2
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: irq 11, pci mem f9ccf800
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.4-52-default ehci_hcd
usb usb5: SerialNumber: 0000:00:10.4
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:0230:05ff:fe6c:20b3 DST=ff02:0000:0000:0000:0000:0001:ff6c:20b3 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=0
hub 3-0:1.0: connect-debounce failed, port 1 disabled
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:0230:05ff:fe6c:20b3 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1193 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[c0101000-c01017ff] MaxPacket=[2048]
usb 5-5: new high speed USB device using address 2
usb 5-5: Product: Flash Reader
usb 5-5: SerialNumber: 00013
usb 1-2: USB disconnect, address 2
usb 1-2: new low speed USB device using address 3
usb 2-1: new low speed USB device using address 2
usb 2-1: Product: USB Adapter K
usb 2-1: Manufacturer: KOBIL
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00300531000ce100]
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0 SRC=fe80:0000:0000:0000:0230:05ff:fe6c:20b3 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
eth0: no IPv6 routers present
drivers/usb/core/usb.c: registered new driver hiddev
input: USB HID v1.11 Keyboard [046a:0027] on usb-0000:00:10.0-2
input,hiddev96: USB HID v1.11 Device [046a:0027] on usb-0000:00:10.0-2
input: USB HID v1.11 Mouse [046a:0027] on usb-0000:00:10.0-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 0, lun 1, type 0
Attached scsi generic sg2 at scsi0, channel 0, id 0, lun 2, type 0
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
Attached scsi generic sg3 at scsi0, channel 0, id 0, lun 3, type 0
USB Mass Storage device found at 2
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for KOBIL USB smart card terminal
kobil 2-1:1.0: KOBIL USB smart card terminal converter detected
KOBIL KAAN Standard Plus / SecOVID Reader Plus detected
usb 2-1: KOBIL USB smart card terminal converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
drivers/usb/core/usb.c: registered new driver kobil
drivers/usb/serial/kobil_sct.c: 21/05/2004 KOBIL Systems GmbH - http://www.kobil.com
drivers/usb/serial/kobil_sct.c: KOBIL USB Smart Card Terminal Driver
st: Version 20040318, fixed bufsize 32768, s/g segs 256
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
powernow-k8: Found AMD Athlon 64 / Opteron processor (version 1.20.07 - March 18, 2004)
powernow-k8: Found AMD Athlon 64 / Opteron processor (version 1.20.07 - March 18, 2004)
powernow-k8: 0 : fid 2 (1000 MHz), vid 12
powernow-k8: 1 : fid a (1800 MHz), vid 6
powernow-k8: 2 : fid c (2000 MHz), vid 2
powernow-k8: cfid c, cvid 2
powernow-k8: init, curr fid c vid 2
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
PCI: Setting latency timer of device 0000:00:11.5 to 64
lp: driver loaded but no devices found
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[fglrx] module loaded - fglrx 3.14.6 [Oct 30 2004] on minor 0
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
[fglrx] AGP detected, AgpState = 0x1f000a0b (hardware caps of chipset)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps)
[fglrx] free AGP = 121909248
[fglrx] max AGP = 121909248
[fglrx] free LFB = 116387840
[fglrx] max LFB = 116387840
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 32768
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
ALSA sound/pci/via82xx.c:727: invalid via82xx_cur_ptr, using last valid pointer
ALSA sound/pci/via82xx.c:727: invalid via82xx_cur_ptr, using last valid pointer
ALSA sound/pci/via82xx.c:727: invalid via82xx_cur_ptr, using last valid pointer
spurious 8259A interrupt: IRQ7.
usb 5-6: new high speed USB device using address 3
usb 5-6: Product: USB 2.0 Storage Device
usb 5-6: SerialNumber: 03669562100000000400
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: USB 2.0 Model: Storage Device Rev: 0111
Type: Direct-Access ANSI SCSI revision: 02
sde : very big device. try to use READ CAPACITY(16).
sde : READ CAPACITY(16) failed.
sde : status=0, message=00, host=5, driver=00
sde : use 0xffffffff as device size
SCSI device sde: 4294967296 512-byte hdwr sectors (2199023 MB)
sde: assuming drive cache: write through
sde:SCSI error : <1 0 0 0> return code = 0x8000002
Current sde: sense key No Sense
end_request: I/O error, dev sde, sector 4294967288
Buffer I/O error on device sde, logical block 536870911
SCSI error : <1 0 0 0> return code = 0x8000002
Current sde: sense key No Sense
end_request: I/O error, dev sde, sector 4294967288
Buffer I/O error on device sde, logical block 536870911
sde1 sde2
Attached scsi disk sde at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg4 at scsi1, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 3