ACPI Problem auf Notebook

**samy-delux** · 24.04.05, 21:30

Hi,

Ich hab ein Acer Travelmate 8100. Linux hat mit diesem Notebook und ACPI so seine Probleme. Ich hab im Internet einen Thread gefunden der mir beschreibt, wie man ACPI auf genau meinem Notebook zum laufen bekommt. Also einfach mal ausprobiert:

So weit so gut. Das Notebook bootet jetzt mit aktiviertem ACPI endlich weiter als nur mit der Message "Starting Ubuntu" haengen zu bleiben. Das Problem ist, dass ich nicht in X oder die Konsole reinkomme, da er mit dann wenn normal Gnome gestartet wird einfach nur nen schwarzen Bildschirm ausgibt.
In '/var/log/messages' konnte ich leider auch nichts finden was mir einen Fehler zeigen wuerde, es sieht alles ganz ordentlich aus, eben nur das Ergebnis nicht

Vieleicht kann das ja mal jemand durchgehen und sagen was faul ist:

Code:

Apr 24 22:05:22 localhost syslogd 1.4.1#16ubuntu6: restart.
Apr 24 22:05:22 localhost kernel: Inspecting /boot/System.map-2.6.12-rc2
Apr 24 22:05:22 localhost kernel: Loaded 25983 symbols from /boot/System.map-2.6.12-rc2.
Apr 24 22:05:22 localhost kernel: Symbols match kernel version 2.6.12.
Apr 24 22:05:22 localhost kernel: No module symbols loaded - kernel modules not enabled. 
Apr 24 22:05:22 localhost kernel:  methods
Apr 24 22:05:22 localhost kernel: ACPI: Interpreter enabled
Apr 24 22:05:22 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Apr 24 22:05:22 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Apr 24 22:05:22 localhost kernel: PCI: Probing PCI hardware (bus 00)
Apr 24 22:05:22 localhost kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Apr 24 22:05:22 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Apr 24 22:05:22 localhost kernel: ACPI: Embedded Controller [EC0] (gpe 29)
Apr 24 22:05:22 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Apr 24 22:05:22 localhost kernel: pnp: PnP ACPI init
Apr 24 22:05:22 localhost kernel: pnp: PnP ACPI: found 11 devices
Apr 24 22:05:22 localhost kernel: PnPBIOS: Disabled by ACPI PNP
Apr 24 22:05:22 localhost kernel: PCI: Using ACPI for IRQ routing
Apr 24 22:05:22 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Apr 24 22:05:22 localhost kernel: Simple Boot Flag at 0x36 set to 0x1
Apr 24 22:05:22 localhost kernel: VFS: Disk quotas dquot_6.5.1
Apr 24 22:05:22 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr 24 22:05:22 localhost kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Apr 24 22:05:22 localhost kernel: devfs: boot_options: 0x0
Apr 24 22:05:22 localhost kernel: Initializing Cryptographic API
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 24 22:05:22 localhost kernel: assign_interrupt_mode Found MSI capability
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Apr 24 22:05:22 localhost kernel: assign_interrupt_mode Found MSI capability
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
Apr 24 22:05:22 localhost kernel: assign_interrupt_mode Found MSI capability
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Apr 24 22:05:22 localhost kernel: assign_interrupt_mode Found MSI capability
Apr 24 22:05:22 localhost kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Apr 24 22:05:22 localhost kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
Apr 24 22:05:22 localhost kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Apr 24 22:05:22 localhost kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Apr 24 22:05:22 localhost kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Apr 24 22:05:22 localhost kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Apr 24 22:05:22 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 24 22:05:22 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Apr 24 22:05:22 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
Apr 24 22:05:22 localhost kernel: pnp: Device 00:07 activated.
Apr 24 22:05:22 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 24 22:05:22 localhost kernel: io scheduler noop registered
Apr 24 22:05:22 localhost kernel: io scheduler anticipatory registered
Apr 24 22:05:22 localhost kernel: io scheduler deadline registered
Apr 24 22:05:22 localhost kernel: io scheduler cfq registered
Apr 24 22:05:22 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Apr 24 22:05:22 localhost kernel: mice: PS/2 mouse device common for all mice
Apr 24 22:05:22 localhost kernel: NET: Registered protocol family 2
Apr 24 22:05:22 localhost kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Apr 24 22:05:22 localhost kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Apr 24 22:05:22 localhost kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Apr 24 22:05:22 localhost kernel: TCP: Hash tables configured (established 16384 bind 16384)
Apr 24 22:05:22 localhost kernel: NET: Registered protocol family 8
Apr 24 22:05:22 localhost kernel: NET: Registered protocol family 20
Apr 24 22:05:22 localhost kernel: ACPI wakeup devices: 
Apr 24 22:05:22 localhost kernel: AZAL RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC 
Apr 24 22:05:22 localhost kernel: ACPI: (supports S0 S3 S4 S5)
Apr 24 22:05:22 localhost kernel: RAMDISK: cramfs filesystem found at block 0
Apr 24 22:05:22 localhost kernel: RAMDISK: Loading 3920KiB [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^Hdone.
Apr 24 22:05:22 localhost kernel: VFS: Mounted root (cramfs filesystem) readonly.
Apr 24 22:05:22 localhost kernel: acpi_bus-0077 [04] acpi_bus_get_device   : No context for object [dfa8e328]
Apr 24 22:05:22 localhost kernel: Freeing unused kernel memory: 292k freed
Apr 24 22:05:22 localhost kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
Apr 24 22:05:22 localhost kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Apr 24 22:05:22 localhost kernel: acpi_processor-0484 [07] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x1
Apr 24 22:05:22 localhost kernel: ACPI: Thermal Zone [THRM] (48 C)
Apr 24 22:05:22 localhost kernel: NET: Registered protocol family 1
Apr 24 22:05:22 localhost kernel: SCSI subsystem initialized
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Apr 24 22:05:22 localhost kernel: ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18A0 irq 14
Apr 24 22:05:22 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Apr 24 22:05:22 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Apr 24 22:05:22 localhost kernel: ata1: dev 0 ATA, max UDMA/100, 195371568 sectors: lba48
Apr 24 22:05:22 localhost kernel: ata1: dev 0 configured for UDMA/100
Apr 24 22:05:22 localhost kernel: scsi0 : ata_piix
Apr 24 22:05:22 localhost kernel:   Vendor: ATA       Model: ST9100823A        Rev: 3.01
Apr 24 22:05:22 localhost kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Apr 24 22:05:22 localhost kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Apr 24 22:05:22 localhost kernel: ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18A8 irq 15
Apr 24 22:05:22 localhost kernel: atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
Apr 24 22:05:22 localhost kernel: atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
Apr 24 22:05:22 localhost kernel: ata2: dev 0 ATAPI, max UDMA/33
Apr 24 22:05:22 localhost kernel: ata2: dev 0 configured for UDMA/33
Apr 24 22:05:22 localhost kernel: scsi1 : ata_piix
Apr 24 22:05:22 localhost kernel: SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
Apr 24 22:05:22 localhost kernel: SCSI device sda: drive cache: write back
Apr 24 22:05:22 localhost kernel: SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
Apr 24 22:05:22 localhost kernel: SCSI device sda: drive cache: write back
Apr 24 22:05:22 localhost kernel:  /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
Apr 24 22:05:22 localhost kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Apr 24 22:05:22 localhost kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Apr 24 22:05:22 localhost kernel: EXT3-fs: write access will be enabled during recovery.
Apr 24 22:05:22 localhost kernel: EXT3-fs: sda4: orphan cleanup on readonly fs
Apr 24 22:05:22 localhost kernel: EXT3-fs: sda4: 4 orphan inodes deleted
Apr 24 22:05:22 localhost kernel: EXT3-fs: recovery complete.
Apr 24 22:05:22 localhost kernel: kjournald starting.  Commit interval 5 seconds
Apr 24 22:05:22 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 24 22:05:22 localhost kernel: Adding 1052248k swap on /dev/sda3.  Priority:-1 extents:1
Apr 24 22:05:22 localhost kernel: EXT3 FS on sda4, internal journal
Apr 24 22:05:22 localhost kernel: atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
Apr 24 22:05:22 localhost last message repeated 9 times
Apr 24 22:05:22 localhost kernel: sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Apr 24 22:05:22 localhost kernel: atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
Apr 24 22:05:22 localhost last message repeated 16 times
Apr 24 22:05:22 localhost kernel: kjournald starting.  Commit interval 5 seconds
Apr 24 22:05:22 localhost kernel: EXT3 FS on sda2, internal journal
Apr 24 22:05:22 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 24 22:05:22 localhost kernel: NTFS driver 2.1.22 [Flags: R/O MODULE].
Apr 24 22:05:22 localhost kernel: NTFS volume version 3.1.
Apr 24 22:05:22 localhost kernel: Real Time Clock Driver v1.12
Apr 24 22:05:22 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones
Apr 24 22:05:22 localhost kernel: agpgart: Detected an Intel 915GM Chipset.
Apr 24 22:05:22 localhost kernel: agpgart: AGP aperture is 256M @ 0x0
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 24 22:05:22 localhost kernel: usbcore: registered new driver usbfs
Apr 24 22:05:22 localhost kernel: usbcore: registered new driver hub
Apr 24 22:05:22 localhost kernel: USB Universal Host Controller Interface driver v2.2
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
Apr 24 22:05:22 localhost kernel: hub 1-0:1.0: USB hub found
Apr 24 22:05:22 localhost kernel: hub 1-0:1.0: 2 ports detected
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
Apr 24 22:05:22 localhost kernel: hub 2-0:1.0: USB hub found
Apr 24 22:05:22 localhost kernel: hub 2-0:1.0: 2 ports detected
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
Apr 24 22:05:22 localhost kernel: hub 3-0:1.0: USB hub found
Apr 24 22:05:22 localhost kernel: hub 3-0:1.0: 2 ports detected
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Apr 24 22:05:22 localhost kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
Apr 24 22:05:22 localhost kernel: hub 4-0:1.0: USB hub found
Apr 24 22:05:22 localhost kernel: hub 4-0:1.0: 2 ports detected
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Apr 24 22:05:22 localhost kernel: ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
Apr 24 22:05:22 localhost kernel: usb 4-1: new low speed USB device using uhci_hcd and address 2
Apr 24 22:05:22 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Apr 24 22:05:22 localhost kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc8004000
Apr 24 22:05:22 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Apr 24 22:05:22 localhost kernel: hub 5-0:1.0: USB hub found
Apr 24 22:05:22 localhost kernel: hub 5-0:1.0: 8 ports detected
Apr 24 22:05:22 localhost kernel: ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.3
Apr 24 22:05:22 localhost kernel: ipw2200: Copyright(c) 2003-2004 Intel Corporation
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 17 (level, low) -> IRQ 17
Apr 24 22:05:22 localhost kernel: ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
Apr 24 22:05:22 localhost kernel: ipw2200: probe of 0000:06:03.0 failed with error -5
Apr 24 22:05:22 localhost kernel: tg3.c:v3.25 (March 24, 2005)
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 16 (level, low) -> IRQ 16
Apr 24 22:05:22 localhost kernel: eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:7f:6e:c9
Apr 24 22:05:22 localhost kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] 
Apr 24 22:05:22 localhost kernel: usb 4-1: new low speed USB device using uhci_hcd and address 3
Apr 24 22:05:22 localhost kernel: ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 19 (level, low) -> IRQ 19
Apr 24 22:05:22 localhost kernel: Synaptics Touchpad, model: 1
Apr 24 22:05:22 localhost kernel:  Firmware: 5.9
Apr 24 22:05:22 localhost kernel:  Sensor: 18
Apr 24 22:05:22 localhost kernel:  new absolute packet format
Apr 24 22:05:22 localhost kernel:  Touchpad has extended capability bits
Apr 24 22:05:22 localhost kernel:  -> 4 multi-buttons, i.e. besides standard buttons
Apr 24 22:05:22 localhost kernel:  -> multifinger detection
Apr 24 22:05:22 localhost kernel:  -> palm detection
Apr 24 22:05:22 localhost kernel: input: SynPS/2 Synaptics TouchPad on isa0060/serio4
Apr 24 22:05:22 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[c8215000-c82157ff]  Max Packet=[2048]
Apr 24 22:05:22 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Apr 24 22:05:22 localhost kernel: usbcore: registered new driver hiddev
Apr 24 22:05:22 localhost kernel: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1
Apr 24 22:05:22 localhost kernel: usbcore: registered new driver usbhid
Apr 24 22:05:22 localhost kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Apr 24 22:05:22 localhost kernel: Linux Kernel Card Services
Apr 24 22:05:22 localhost kernel:   options:  [pci] [cardbus] [pm]
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 18
Apr 24 22:05:22 localhost kernel: Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070]
Apr 24 22:05:22 localhost kernel: Yenta O2: res at 0x94/0xD4: ea/00
Apr 24 22:05:22 localhost kernel: Yenta O2: enabling read prefetch/write burst
Apr 24 22:05:22 localhost kernel: Yenta: ISA IRQ mask 0x04b8, PCI irq 18
Apr 24 22:05:22 localhost kernel: Socket status: 30000006
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:06:09.1[A] -> GSI 18 (level, low) -> IRQ 18
Apr 24 22:05:22 localhost kernel: Yenta: CardBus bridge found at 0000:06:09.1 [1025:0070]
Apr 24 22:05:22 localhost kernel: Yenta: ISA IRQ mask 0x04b8, PCI irq 18
Apr 24 22:05:22 localhost kernel: Socket status: 30000006
Apr 24 22:05:22 localhost kernel: ACPI: PCI Interrupt 0000:06:09.3[A] -> GSI 18 (level, low) -> IRQ 18
Apr 24 22:05:22 localhost kernel: Yenta: CardBus bridge found at 0000:06:09.3 [1025:0070]
Apr 24 22:05:22 localhost kernel: Yenta: ISA IRQ mask 0x04b8, PCI irq 18
Apr 24 22:05:22 localhost kernel: Socket status: 30000410
Apr 24 22:05:22 localhost kernel: tg3: eth1: Link is up at 1000 Mbps, full duplex.
Apr 24 22:05:22 localhost kernel: tg3: eth1: Flow control is on for TX and on for RX.
Apr 24 22:05:22 localhost kernel: NET: Registered protocol family 10
Apr 24 22:05:22 localhost kernel: Disabled Privacy Extensions on device c0390580(lo)
Apr 24 22:05:22 localhost kernel: IPv6 over IPv4 tunneling driver

**samy-delux** · 24.04.05, 21:38

Ich hab nochmal per 'grep acpi' alles durch gegangen und hab diese beiden Fehler gefunden:

Code:

Apr 24 22:05:22 localhost kernel: acpi_bus-0077 [04] acpi_bus_get_device   : No context for object [dfa8e328]
Apr 24 22:05:22 localhost kernel: acpi_processor-0484 [07] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x1

Kann mir jemand sagen was sie genau bedeuten, oder besser ob sie das sein koennten was mein System zum "erliegen" bringt?

Noch ne kleine Info: Ich kann den gleichen Kernel mit der Boot Option 'acpi=off' wunderbar booten.

**opeljan** · 24.04.05, 21:48

...

eigentlich witzig, da ich heute eine alte ausgabe der Linux User gelesen habe, wo es genau um apm und acpi geht.

Dort wird geschrieben, daß acpi nicht so zuverlässig funzt und man lieber apm nehmen soll (im kernel aktivieren!).

Schau mal auf www.google.de/linux nach software suspend (oder so ähnlich).
Das soll alles auf software basis funktionieren mit sleep und suspend und so.

Falls du nix finden solltest, scan ich den artikel mal ab und schick ihn dir per mail!

So long

**tictactux** · 24.04.05, 22:18

Zitat von samy-delux

Kann mir jemand sagen was sie genau bedeuten, oder besser ob sie das sein koennten was mein System zum "erliegen" bringt?

Noch ne kleine Info: Ich kann den gleichen Kernel mit der Boot Option 'acpi=off' wunderbar booten.

das ist "nur" ein Beispiel für eine kaputte ACPI-Implementierung.
Infos und Gegenmaßnahmen findest Du evtl. auf http://acpi.sourceforge.net
Stichwort: DSDT.
Gruss,
Wolfgang

**samy-delux** · 25.04.05, 20:04

Naja, das Problem ist, ich habe ja schon meine DSDT gefixt und kann sie auch ohne Errors aber mit einer Warning compilieren. Bei anderen Leuten geht diese DSDT nur bei mir nicht.

Kann mir bitte jemand sagen was diese beiden Fehler bedeuten?

**samy-delux** · 26.04.05, 20:59

Ich hab mir meine DSDT jetzt nochmal mit dem allerneuesten Compiler von Intel gebaut aber es ist immer noch der gleiche Fehler!
Ich dachte mir schon es wuerde jetzt funktionieren, weil die Warnung beim bauen der DSDT weg war, aber falsch gedacht.

damokle · 10.05.05, 15:10

Hallo Sammy,
ich hatte auch Probleme beim Booten meiner Kanotix Distribution. Mit nopcmcia und noapic fuhr mein Rechner dann hoch.
Nachdem ich den aktuellen Grafiktreiber von ATi installiert hatte bekam ich auch ein schwarzes Bild. Um dieses Problem zu korrigieren mußte ich einige Einträge in der XF86Config ändern. Da ich nicht vor meinem Rechnersitze kann ich leider nicht genau sagen, wie die Option auszusehen hat, hier was ich aus dem Gedächtnis und mit googles Hilfe nochh zusammengebracht habe:
Du mußt in der Section Device (Das Device der X700) eine Zeile 'Option "MonitorLayout" "LVDS, TMDS" ' haben. Zudem solltest du auch noch kontrollieren, ob du die entsprechenden Modlines in der Konfigurationsdatei hast. Wenn dies nicht der Fall ist, dann generiere diese bitte nach.
Nach dieser Änderung sollte nun ein Bild sichtbar sein. Aber Achtung evtl kannst du es nicht sehen, weil die Hintergrundbeleuchtung nicht eingeschaltet ist. Also genau hinschauen.
Wenn du aber ein Bild siehst und die Hintergrundbeleuchtung ist nicht an, mußt du den Wert TMDS ändern. Ich glaube ich habe in auch auf LVDS gesetzt.

Ich hoffe, ich konnte dir helfen.
Gruß damokle