Also, es ist wie folgt: Ich habe mir jetzt Suse 9.2 installiert. Ich habe eine simple WLAN-Karte, die von Yast erfolgreich als
"Texas Instruments ACX 111 54Mbps Wireless Interface"
erkannt wurde. Nachdem ich die Karte zum ersten Mal installiert hatte, erhielt ich beim Befehl PING grundsätzlich die tolle Ausgabe
"Network not reachable".
Ich habe die Karte jetzt mit Hilfe des Ndiswrappers installiert und konfiguriert, jedoch bin ich nach wie vor nicht im Netzwerk.
Hier die Infos:
Code:
Felix:/home/Felix # ifconfig
wlan0 Protokoll:Ethernet Hardware Adresse 00:40:F4:AD:C3:D1
inet Adresse:192.168.1.5 Bcast:192.168.1.255 Maske:255.255.255.0
inet6 Adresse: fe80::240:f4ff:fead:c3d1/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:26 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:10
Felix:/home/Felix # iwconfig
wlan0 IEEE 802.11g+ ESSID:"G664T_RGB" Nickname:"Felix"
Mode:Managed Frequency:2.462 GHz Access Point: 00:00:00:00:00:00
Bit Rate:54 Mb/s Tx-Power:15 dBm
Retry min limit:7 RTS thr:off
Encryption key:off
Power Management:off
Link Quality=49/100 Signal level=29/100 Noise level=0/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Felix@Felix:~> ping 192.168.1.8
PING 192.168.1.8 (192.168.1.8) 56(84) bytes of data.
From 192.168.1.5: icmp_seq=2 Destination Host Unreachable
From 192.168.1.5 icmp_seq=2 Destination Host Unreachable
From 192.168.1.5 icmp_seq=3 Destination Host Unreachable
From 192.168.1.5 icmp_seq=4 Destination Host Unreachable
From 192.168.1.5 icmp_seq=6 Destination Host Unreachable
From 192.168.1.5 icmp_seq=7 Destination Host Unreachable
From 192.168.1.5 icmp_seq=8 Destination Host Unreachable
--- 192.168.1.8 ping statistics ---
10 packets transmitted, 0 received, +7 errors, 100% packet loss, time 9000ms
, pipe 3
Ich habe die Boot.msg als Anhang hochgeladen, musste sie jedoch in TXT umbenennen.
EDIT#: Schon mal Danke im Vorraus, für alle die auch nur einen Moment drüber nachdenken!!
Lesezeichen