Hi,
Ich hab hier mehrere Rechner mit 2 Grafikkarten und 2 TFT Monitoren daran. Es handelt sich bei den Grafikkarten um die folgenden
Rechner 1:
0000:00:0b.0 VGA compatible controller: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] (rev 9a)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a)
Rechner 2:
0000:00:0b.0 VGA compatible controller: ATI Technologies Inc 264VT [Mach64 VT] (rev 40)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a)
Rechner 3:
0000:00:0b.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 3a)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a)
Bei Rechner 1 und 3 handelt es sich um Samsung Syncmaster 910T mit 1280 x 1024@75 Hz als maximale Auflösung. Und bei eben diesen gibt es ein Problem: Auf dem Monitor, der an der AGP Karte hängt, gibt es absolut kein Problem, das Bild wird korrekt in 1280x1024. Auf dem Monitor an der PCI Karte gibt es allerdings das Problem, das das Bild leicht unscharf ist und die maximale Auflösung 1024x768 beträgt. Das merkwürdige ist, das dies bei den Monitoren an Rechner 2 nicht vorliegt. Hier sind allerdings auch andere Monitore installiert, die Anzeige läuft aber in der gleichen Auflösung.
Hier noch die XFree86-Config der Rechner:
Rechner 1:
Rechner 2:### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
Section "Files"
FontPath "tcp/10.100.0.4:7100" # network font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc103"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/ttyS0"
Option "Protocol" "Microsoft"
Option "Emulate3Buttons" "false"
EndSection
Section "Device"
Identifier "video0"
Driver "ati"
BusID "agp:1:0:0"
EndSection
Section "Device"
Identifier "video1"
Driver "ati"
BusID "pci:0:11:0"
EndSection
Section "Monitor"
Identifier "tft0"
HorizSync 30-81
VertRefresh 56-75
Option "DPMS"
EndSection
Section "Monitor"
Identifier "tft1"
HorizSync 30-81
VertRefresh 56-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "screen0"
Device "video0"
Monitor "tft0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "screen1"
Device "video1"
Monitor "tft1"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "xserver0"
Screen 0 "screen0"
Screen 1 "screen1" rightOf "screen0"
InputDevice "Generic Keyboard"
InputDevice "Generic Mouse"
Option "AllowMouseOpenFail"
EndSection
### END DEBCONF SECTION
Rechner 3:### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
Section "Files"
FontPath "tcp/10.100.0.4:7100" # network font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc103"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/ttyS0"
Option "Protocol" "Microsoft"
Option "Emulate3Buttons" "false"
EndSection
Section "Device"
Identifier "video0"
Driver "ati"
BusID "agp:1:0:0"
EndSection
Section "Device"
Identifier "video1"
Driver "ati"
BusID "pci:0:11:0"
EndSection
Section "Monitor"
Identifier "tft0"
HorizSync 30-81
VertRefresh 56-75
Option "DPMS"
EndSection
Section "Monitor"
Identifier "tft1"
HorizSync 30-81
VertRefresh 56-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "screen0"
Device "video0"
Monitor "tft0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "screen1"
Device "video1"
Monitor "tft1"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "xserver0"
Screen 0 "screen0"
Screen 1 "screen1" rightOf "screen0"
InputDevice "Generic Keyboard"
InputDevice "Generic Mouse"
Option "AllowMouseOpenFail"
EndSection
### END DEBCONF SECTION
Hat irgendwer noch ne Idee? Ich hab das mitlerweile auf die Grafikkarten geschoben, bin damit aber eigentlich nich so ganz zufrieden...### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
Section "Files"
FontPath "tcp/10.100.0.4:7100" # network font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc103"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/ttyS0"
Option "Protocol" "Microsoft"
Option "Emulate3Buttons" "false"
EndSection
Section "Device"
Identifier "video0"
Driver "ati"
BusID "agp:1:0:0"
EndSection
Section "Device"
Identifier "video1"
Driver "ati"
BusID "pci:0:11:0"
EndSection
Section "Monitor"
Identifier "tft0"
HorizSync 30-81
VertRefresh 56-75
Option "DPMS"
EndSection
Section "Monitor"
Identifier "tft1"
HorizSync 30-81
VertRefresh 56-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "screen0"
Device "video0"
Monitor "tft0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "screen1"
Device "video1"
Monitor "tft1"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "xserver0"
Screen 0 "screen0"
Screen 1 "screen1" rightOf "screen0"
InputDevice "Generic Keyboard"
InputDevice "Generic Mouse"
Option "AllowMouseOpenFail"
EndSection
### END DEBCONF SECTION
Gruß,
flow
Lesezeichen