Hi!

So, ich bin jetzt wirklich am Ende. Nach tagelanger Vergewaltigung der Suchfunktion und Google
muss ich euch jetzt doch direkt um Hilfe bitten.

Ich würde gerne meinen USB Stick (oder Externe Festplatte) mounten.
Mein Problem ist aber, dass /dev/sd* nicht existiert.
Es erscheint auch nicht, nachdem ich den Stickt anstöpsle.

Ich verwende übrigens Gentoo und Kernel 2.6.9
Bin vor Kurzem von SuSE auf Gentoo umgestiegen, und daher von YaST verwöhnt

Mittlerweile habe ich alles, was irgendwie helfen könnte im Kernel, und
natürlich auch die Vorgaben aus den div. howtos:

USB Support:
-Support for USB y
-Host Controller Drivers: UHCI y
-Mass Storage Support y

SCSI-Support:
-SCSI Support y
-SCSI Disc Support y

General Setup:
-Support for hot-pluggable devices y

Hier die Ausgabe von dmesg nach dem Anstöpseln:
Code:
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j  CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
hub 1-0:1.0: port 3 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: port 3 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003801 POWER OWNER sig=j  CONNECT
uhci_hcd 0000:00:1d.1: wakeup_hc
uhci_hcd 0000:00:1d.1: port 1 portsc 0083
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
uhci_hcd 0000:00:1d.1: CTRL: TypeReq=0x2301 val=0x2 idx=0x0 len=0 ==> -32
usb 3-1: new full speed USB device using address 5
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: default language 0x0409
usb 3-1: Product: USBMSC MMC Audio Player
usb 3-1: Manufacturer: SigmaTel, Inc.
usb 3-1: SerialNumber: 012345678901
usb 3-1: hotplug
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: hotplug
ub 3-1:1.0: usb_probe_interface
ub 3-1:1.0: usb_probe_interface - got id
uhci_hcd 0000:00:1d.1: uhci_result_control: failed with status 440000
[cf523270] link (0f5231e2) element (08093080)
  0: [c8093080] link (080930c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=5, PID=2d(SETUP) (buf=08b3bdc0)
  1: [c80930c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=5, PID=69(IN) (buf=00000000)

uba: device 5 capacity nsec 123904 bsize 512
uba: was not changed
 /dev/ub/a: p1
usb 3-1: adding 3-1:1.1 (config #1, interface 1)
usb 3-1:1.1: hotplug
ub 3-1:1.1: usb_probe_interface
ub 3-1:1.1: usb_probe_interface - got id
uhci_hcd 0000:00:1d.1: uhci_result_control: failed with status 440000
[cf523240] link (0f5231e2) element (08093000)
  0: [c8093000] link (08093040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=5, PID=2d(SETUP) (buf=0f5cc5c0)
  1: [c8093040] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=5, PID=69(IN) (buf=00000000)

uhci_hcd 0000:00:1d.1: uhci_result_control: failed with status 440000
[cf523240] link (0f5231e2) element (08093000)
  0: [c8093000] link (08093040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=5, PID=2d(SETUP) (buf=0f5cc5c0)
  1: [c8093040] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=5, PID=69(IN) (buf=00000000)

ubb: device 5 capacity nsec 494080 bsize 512
ubb: was not changed
 /dev/ub/b: p1
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001002 POWER sig=se0  CSC
hub 1-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:1d.1: port 1 portsc 008a
hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
usb 3-1: USB disconnect, address 5
usb 3-1: usb_disable_device nuking all URBs
usb 3-1: unregistering interface 3-1:1.0
usb 3-1:1.0: hotplug
usb 3-1: unregistering interface 3-1:1.1
usb 3-1:1.1: hotplug
usb 3-1: unregistering device
usb 3-1: hotplug
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:1d.1: suspend_hc
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j  CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
hub 1-0:1.0: port 3 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: port 3 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003801 POWER OWNER sig=j  CONNECT
uhci_hcd 0000:00:1d.1: wakeup_hc
uhci_hcd 0000:00:1d.1: port 1 portsc 0083
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
uhci_hcd 0000:00:1d.1: CTRL: TypeReq=0x2301 val=0x2 idx=0x0 len=0 ==> -32
usb 3-1: new full speed USB device using address 6
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: default language 0x0409
usb 3-1: Product: USBMSC MMC Audio Player
usb 3-1: Manufacturer: SigmaTel, Inc.
usb 3-1: SerialNumber: 012345678901
usb 3-1: hotplug
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: hotplug
ub 3-1:1.0: usb_probe_interface
ub 3-1:1.0: usb_probe_interface - got id
uhci_hcd 0000:00:1d.1: uhci_result_control: failed with status 440000
[cf523270] link (0f5231e2) element (08093080)
  0: [c8093080] link (080930c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=6, PID=2d(SETUP) (buf=0f5cc1c0)
  1: [c80930c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=6, PID=69(IN) (buf=00000000)

uba: device 6 capacity nsec 123904 bsize 512
uba: was not changed
 /dev/ub/a: p1
usb 3-1: adding 3-1:1.1 (config #1, interface 1)
usb 3-1:1.1: hotplug
ub 3-1:1.1: usb_probe_interface
ub 3-1:1.1: usb_probe_interface - got id
uhci_hcd 0000:00:1d.1: uhci_result_control: failed with status 440000
[cf523240] link (0f5231e2) element (08093000)
  0: [c8093000] link (08093040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=6, PID=2d(SETUP) (buf=08b3bdc0)
  1: [c8093040] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=6, PID=69(IN) (buf=00000000)

uhci_hcd 0000:00:1d.1: uhci_result_control: failed with status 440000
[cf523270] link (0f5231e2) element (08093080)
  0: [c8093080] link (080930c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=6, PID=2d(SETUP) (buf=08b3bdc0)
  1: [c80930c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=6, PID=69(IN) (buf=00000000)

ubb: device 6 capacity nsec 494080 bsize 512
ubb: was not changed
 /dev/ub/b: p1

Und /var/log/everything:
Code:
Nov  2 03:05:21 [kernel] usb 3-1: new full speed USB device using address 6
Nov  2 03:05:21 [kernel] usb 3-1: Product: USBMSC MMC Audio Player
Nov  2 03:05:21 [kernel] usb 3-1: Manufacturer: SigmaTel, Inc.
Nov  2 03:05:21 [kernel] usb 3-1: SerialNumber: 012345678901
Nov  2 03:05:21 [kernel] uba: device 6 capacity nsec 123904 bsize 512
Nov  2 03:05:21 [kernel] uba: was not changed
Nov  2 03:05:21 [kernel] ubb: device 6 capacity nsec 494080 bsize 512
Nov  2 03:05:21 [kernel] ubb: was not changed
aber: ls /dev/sd* = No such file or directory

Leider kann ich nirgendwo Infos über /dev/ub/a/part1 finden...

Also was mache ich nur falsch?

Danke schon mal für eure Hilfe!

Grüsse,
Zod