hallo,
nachdem ich nun von Slackware 9.1 auf Slackware 10.0 umgestiegen bin habe ich ein problem mit cdrecord. Und zwar folgendes:
Nach dem aufruf von cdrecord erkennt es erstmal meinen brenner richtig aber dann geht die systemlast auf 100% und ich kann erstmal für ein paar minuten nichts mehr am rechner machen. cdrecord liefert dazu aber folgende meldung:
Mh, ist das jetzt ein fehler oder nicht?Code:cdrecord: Input/output error. read buffer: scsi sendcmd: no error CDB: 3C 00 00 00 00 00 00 FC 00 00 status: 0x0 (GOOD STATUS) cmd finished after 32.348s timeout 200s
Aber irgendwann ist das warten dann zuende und cdrecord fängt mit dem brennen an! Die erstellt cd funktioniert dann auch fehlerfrei! Diese problem tritt sowohl mit der scsi-emulation und ohne auf.
Ich habe auch in syslog geschaut, da werden eine menge scsi fehler ausgegeben!
Hat sich denn an der scsi-emulation von kernel 2.4.22 (Slackware 9.1) zu 2.4.27 (Slackware 10.0) etwas grundlegendes geändert?
ich habe die ausgabe von cdrecord und den abschnitt aus syslog mit beigefügt, ich hoffe das mir da jemand weiterhelfen kann.
cdrecord:
syslog:Code:darktron@darkstar:~$ cdrecord -v gracetime=2 speed=12 -dao driveropts=burnfree cuefile=/tmp/kde-darktron/VIDEOCD.cue -eject -overburn dev=ATAPI:0,0,0 Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: 'ATAPI:0,0,0' devname: 'ATAPI' scsibus: 0 target: 0 lun: 0 Warning: Using ATA Packet interface. Warning: The related Linux kernel interface code seems to be unmaintained. Warning: There is absolutely NO DMA, operations thus are slow. Using libscg version 'schily-0.8'. Driveropts: 'burnfree' SCSI buffer size: 64512 atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'MSI ' Identifikation : 'CD-RW MS-8348 ' Revision : '140D' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x0008 Profile: 0x0009 (current) Profile: 0x000A Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1806336 = 1764 KB cdrecord: Input/output error. read buffer: scsi sendcmd: no error CDB: 3C 00 00 00 00 00 00 FC 00 00 status: 0x0 (GOOD STATUS) cmd finished after 32.348s timeout 200s FIFO size : 4194304 = 4096 KB Track 01: data 1 MB Track 02: data 801 MB Total size: 802 MB (79:28.82) = 357662 sectors Lout start: 802 MB (79:30/62) = 357662 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11933 (97:22/67) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 43 Manufacturer: Acer Media Technology, Inc. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2187 Starting to write CD/DVD at speed 12 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 1 of 1 MB written (fifo 98%) [buf 96%] 17.8x. Track 01: Total bytes read/written: 1058400/1058400 (450 sectors). Starting new track at sector: 450 Track 02: 801 of 801 MB written (fifo 100%) [buf 95%] 18.4x. Track 02: Total bytes read/written: 840162624/840162624 (357212 sectors). Writing time: 338.339s Average write speed 14.2x. Min drive buffer fill was 95% Fixating... Fixating time: 12.034s cdrecord: fifo had 13248 puts and 13248 gets. cdrecord: fifo was 0 times empty and 10645 times full, min fill was 95%.
Code:Oct 28 07:43:42 darkstar kernel: spurious 8259A interrupt: IRQ7. Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-33 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-33 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-34 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-34 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-56 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-56 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-57 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-57 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-88 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-88 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-89 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-89 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-90 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-90 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-91 Oct 28 07:44:56 darkstar modprobe: modprobe: Can't locate module block-major-91 Oct 28 07:44:56 darkstar kernel: sr0: CDROM (ioctl) reports ILLEGAL REQUEST. Oct 28 07:44:56 darkstar kernel: sr0: CDROM (ioctl) reports ILLEGAL REQUEST. Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 66560 limit 64512 Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 66560 limit 64512 Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 66560 limit 64512 Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 65536 limit 64512 Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 66560 limit 64512 Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 66560 limit 64512 Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 66560 limit 64512 Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 66560 limit 64512 Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 66560 limit 64512 Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 66560 limit 64512 Oct 28 07:45:01 darkstar kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data Oct 28 07:45:01 darkstar kernel: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ] Oct 28 07:45:01 darkstar kernel: ] Oct 28 07:45:01 darkstar kernel: ide-scsi: expected 64512 got 66560 limit 64512 Oct 28 07:45:01 darkstar kernel: hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } Oct 28 07:45:01 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:01 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:01 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:06 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:45:06 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:45:06 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:06 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:06 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:13 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:45:13 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:45:13 darkstar kernel: scsi0 channel 0 : resetting for second half of retries. Oct 28 07:45:13 darkstar kernel: SCSI bus is being reset for host 0 channel 0. Oct 28 07:45:13 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:13 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:13 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:19 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:45:19 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:45:19 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:19 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:19 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:24 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:45:24 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:45:24 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:24 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:24 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:29 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:45:29 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:45:29 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:29 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:29 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:29 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:45:29 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:45:29 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:29 darkstar kernel: sr0: CDROM (ioctl) error, command: 0x3c 00 00 00 00 00 00 fc 00 00 Oct 28 07:45:29 darkstar kernel: sr00:00: sns = 0 0 Oct 28 07:45:29 darkstar kernel: Non-extended sense class 0 code 0x0 Oct 28 07:45:29 darkstar kernel: Raw sense data:0x00 0x00 0x00 0x00 Oct 28 07:45:36 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:36 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:41 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:45:41 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:45:41 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:41 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:41 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:48 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:45:48 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:45:48 darkstar kernel: scsi0 channel 0 : resetting for second half of retries. Oct 28 07:45:48 darkstar kernel: SCSI bus is being reset for host 0 channel 0. Oct 28 07:45:48 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:48 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:48 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:53 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:45:53 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:45:53 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:53 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:53 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:58 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:45:58 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:45:58 darkstar kernel: hdc: drive not ready for command Oct 28 07:45:58 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:45:58 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:03 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:46:03 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:46:03 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:03 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:46:03 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:08 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:46:08 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:46:08 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:08 darkstar kernel: sr0: CDROM (ioctl) error, command: 0x00 00 00 00 00 00 Oct 28 07:46:08 darkstar kernel: sr00:00: sns = 0 0 Oct 28 07:46:08 darkstar kernel: Non-extended sense class 0 code 0x0 Oct 28 07:46:08 darkstar kernel: Raw sense data:0x00 0x00 0x00 0x00 Oct 28 07:46:08 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:46:08 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:13 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:46:13 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:46:13 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:13 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:46:13 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:20 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:46:20 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:46:20 darkstar kernel: scsi0 channel 0 : resetting for second half of retries. Oct 28 07:46:20 darkstar kernel: SCSI bus is being reset for host 0 channel 0. Oct 28 07:46:20 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:20 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:46:20 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:25 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:46:25 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:46:25 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:25 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:46:25 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:30 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:46:30 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:46:30 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:30 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:46:30 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:35 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:46:35 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:46:35 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:35 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:46:35 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:40 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:46:40 darkstar kernel: hdc: status error: status=0x08 { DataRequest } Oct 28 07:46:40 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:40 darkstar kernel: sr0: CDROM (ioctl) error, command: 0x1b 00 00 00 03 00 Oct 28 07:46:40 darkstar kernel: sr00:00: sns = 0 0 Oct 28 07:46:40 darkstar kernel: Non-extended sense class 0 code 0x0 Oct 28 07:46:40 darkstar kernel: Raw sense data:0x00 0x00 0x00 0x00 Oct 28 07:46:40 darkstar kernel: hdc: status timeout: status=0xd0 { Busy } Oct 28 07:46:40 darkstar kernel: hdc: drive not ready for command Oct 28 07:46:40 darkstar kernel: hdc: ATAPI reset complete Oct 28 07:46:43 darkstar kernel: scsi0 : channel 0 target 0 lun 0 request sense failed, performing reset. Oct 28 07:46:43 darkstar kernel: SCSI bus is being reset for host 0 channel 0. Oct 28 07:46:43 darkstar kernel: sr0: CDROM (ioctl) reports ILLEGAL REQUEST. Oct 28 07:46:47 darkstar last message repeated 5 times Oct 28 07:52:38 darkstar kernel: sr0: CDROM (ioctl) reports ILLEGAL REQUEST. Oct 28 07:52:38 darkstar last message repeated 2 times
Zitieren
Lesezeichen