Code:
# Global Postfix configuration file. This file lists only a subset
# of all 100+ parameters. See the sample-xxx.cf files for a full list.
#
# The general format is lines with parameter = value pairs. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
#
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
# soft_bounce= no
# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory= /var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands. The default value is $program_directory.
#
command_directory= /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). The
# default value is $program_directory. This directory must be owned
# by root.
#
daemon_directory= /usr/lib/postfix
# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner= postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
# default_privs= nobody
# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
mydomain= meinedom.com
# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for. That includes
# Sendmail-style virtual domains hosted on this machine.
#
# Do not include Postfix-style virtual domains - those domains are
# specified elsewhere (see sample-virtual.cf, and sample-transport.cf).
#
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain. Do not specify the
# names of domains that this machine is backup MX host for. Specify
# those names via the relay_domains or permit_mx_backup settings for
# the SMTP server (see sample-smtpd.cf).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key. Continue long lines by starting the
# next line with whitespace.
#
# mail.$mydomain, www.$mydomain, ftp.$mydomain
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in file sample-smtpd.cf.
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
#
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#
# mynetworks_style= class
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
mynetworks= 192.168.0.0/16, 127.0.0.0/8
# The relay_domains parameter restricts what clients this mail system
# will relay mail from, or what destinations this system will relay
# mail to. See the smtpd_recipient_restrictions restriction in the
# file sample-smtpd.cf for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients whose IP address matches $mynetworks,
# - from "trusted" clients matching $relay_domains or subdomains thereof,
# - from untrusted clients to destinations that match $relay_domains
# or subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_maps.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction in the file sample-smtpd.cf.
#
# relay_domains= $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
# REJECTING UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names (not addresses) of users that are local with respect
# to $mydestination and $inet_interfaces. If this parameter is
# defined, then the SMTP server will reject mail for unknown local
# users.
#
# If you use the default Postfix local delivery agent for local
# delivery, uncomment the definition below.
#
# Beware: if the Postfix SMTP server runs chrooted, you may have to
# copy the passwd (not shadow) database into the jail. This is
# system dependent.
#
# local_recipient_maps= $alias_maps unix:passwd.byname
# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 50 SMTP server process
# limit, this limits the mail inflow to 50 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
# in_flow_delay= 1s
# ADDRESS REWRITING
#
# Insert text from sample-rewrite.cf if you need to do address
# masquerading.
#
# Insert text from sample-canonical.cf if you need to do address
# rewriting, or if you need username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# Insert text from sample-virtual.cf if you need virtual domain support.
# "USER HAS MOVED" BOUNCE MESSAGES
#
# Insert text from sample-relocated.cf if you need "user has moved"
# style bounce messages. Alternatively, you can bounce recipients
# with an SMTP server access table. See sample-smtpd.cf.
# TRANSPORT MAP
#
# Insert text from sample-transport.cf if you need explicit routing.
# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
# home_mailbox= Mailbox
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# fallback_transport= lmtp:unix:/file/name
# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown local recipients
# is bounced.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# luser_relay= $user@other.host
# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. See the file
# sample-smtpd.cf for an elaborate list of anti-UCE controls.
# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines. Patterns are matched
# in the specified order, and the search stops upon the first match.
# When a pattern matches, what happens next depends on the associated
# action that is specified in the right-hand side of the table:
#
# REJECT the entire message is rejected.
# REJECT text.... The text is sent to the originator.
# IGNORE the header line is silently discarded.
# WARN the header is logged (not rejected) with a warning message.
# WARN text... as above, and the text is logged, too.
#
# These patterns do not apply to MIME headers in the message body.
#
# See also the body_checks example in the sample-filter.cf file.
#
header_checks= regexp:/etc/postfix/header_checks
# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
#
# By default, Postfix maintains deferred mail logfile information
# only for destinations that Postfix is willing to relay to (as
# specified in the relay_domains parameter). For other destinations,
# Postfix attempts to deliver ALL queued mail after receiving the
# SMTP "ETRN domain.tld" command, or after execution of "sendmail
# -qRdomain.tld". This can be slow when a lot of mail is queued.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this "fast ETRN/sendmail -qR" service.
#
# fast_flush_domains= $relay_domains
# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
# smtpd_banner= $myhostname ESMTP $mail_name
# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.
# default_destination_concurrency_limit= 10
# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level= 2
# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
# debug_peer_list= 127.0.0.1
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command= PATH=/usr/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id & sleep 5
# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path= /usr/sbin/sendmail
# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path= /usr/bin/newaliases
# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path= /usr/bin/mailq
# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group= maildrop
# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory= /usr/share/man
# sample_directory: The location of the Postfix sample configuration files.
#
sample_directory= /usr/share/doc/packages/postfix/samples
# readme_directory: The location of the Postfix README files.
#
readme_directory= /usr/share/doc/packages/postfix/README_FILES
mail_spool_directory= /var/mail
canonical_maps= hash:/etc/postfix/canonical
virtual_maps= ldap:ldapvuser,hash:/etc/postfix/virtual
relocated_maps= hash:/etc/postfix/relocated
transport_maps= hash:/etc/postfix/transport,ldap:ldaptransport
sender_canonical_maps= hash:/etc/postfix/sender_canonical
masquerade_exceptions= root
masquerade_classes= envelope_sender, header_sender, header_recipient
myhostname= mydom.com
inet_interfaces= all
masquerade_domains= $mydomain
mydestination= $myhostname, localhost.$mydomain, ldap:ldapvdom
defer_transports=
disable_dns_lookups= no
relayhost= 192.168.2.2
content_filter=
mailbox_command=
mailbox_transport= lmtp:unix:public/lmtp
smtpd_sender_restrictions= hash:/etc/postfix/access
smtpd_client_restrictions= permit_sasl_authenticated
smtpd_helo_required= no
allow_untrusted_routing= no
smtpd_helo_restrictions=
strict_rfc821_envelopes= yes
smtpd_recipient_restrictions= ldap:ldapmailenab,permit_tls_clientcerts,permit_sasl_authenticated,permit_mynetworks, check_relay_domains
alias_maps= hash:/etc/aliases,hash:/etc/aliases.d/slots,ldap:ldapaliases
alias_database= hash:/etc/aliases,hash:/etc/aliases.d/slots
local_destination_concurrency_limit= 10
mailbox_size_limit= 0
message_size_limit= 100000000
myorigin= $mydomain
recipient_delimiter= +
# relay_clientcerts= ldap:ldaprelcert
smtpd_tls_ask_ccert= yes
smtpd_tls_received_header= yes
tls_daemon_random_source= dev:/dev/urandom
tls_random_source= dev:/dev/urandom
# alias database for SuSE Linux Openexchange Server
ldapaliases_server_host= localhost
ldapaliases_server_port= 389
ldapaliases_bind= no
ldapaliases_timeout= 20
ldapaliases_search_base= dc=mydom,dc=com
ldapaliases_query_filter= (|(alias=%s)(&(fn=%s)(objectclass=SuSEIMAPFolderObject)))
ldapaliases_result_attribute= uid,mailDeliveryProgram,deliverToUID
ldapaliases_scope= one
# virtual user database for SuSE Linux Openexchange Server
# this is used to enable/disable mail reception
ldapmailenab_server_host= localhost
ldapmailenab_server_port= 389
ldapmailenab_bind= no
ldapmailenab_timeout= 20
ldapmailenab_search_base= dc=mydom,dc=com
ldapmailenab_query_filter= (reject=%s)
ldapmailenab_result_attribute= mailenabled
ldapmailenab_scope= one
# this is used for client certificate based relaying
ldaprelcert_server_host= localhost
ldaprelcert_server_port= 389
ldaprelcert_bind= no
ldaprelcert_timeout= 20
ldaprelcert_search_base= dc=mydom,dc=com
ldaprelcert_query_filter= (relayClientcert=%s)
ldaprelcert_result_attribute= uid
ldaprelcert_scope= one
# smtpd_tls_CAfile= /etc/ssl/CA/usedCA.pem
# smtpd_use_tls= yes
# smtpd_tls_cert_file= /etc/ssl/certs/cert.pem
smtpd_sasl_security_options= noanonymous
# smtpd_tls_key_file= /etc/ssl/certs/skey.pem
smtpd_sasl_auth_enable= yes
smtp_sasl_auth_enable= yes
smtp_sasl_security_options= noanonymous
smtp_sasl_password_maps= hash:/etc/postfix/saslpasswd
ldaptransport_server_host= localhost
ldaptransport_server_port= 389
ldaptransport_bind= no
ldaptransport_timeout= 20
ldaptransport_search_base= ou=MailTransports,dc=mydom,dc=com
ldaptransport_query_filter= (&(objectclass=SuSEMailTransportObject)(smtpDomain=%s))
ldaptransport_result_attribute= smtpDomainTransportNexthop
ldaptransport_scope= one
ldapvdom_server_host= localhost
ldapvdom_server_port= 389
ldapvdom_bind= no
ldapvdom_timeout= 20
ldapvdom_search_base= o=DNS,dc=mydom,dc=com
ldapvdom_query_filter= (&(objectclass=dNSZone)(relativeDomainName=@)(zoneName=%s)(MTALocaldomain=true))
ldapvdom_result_attribute= zoneName
ldapvdom_scope= sub
ldapvuser_server_host= localhost
ldapvuser_server_port= 389
ldapvuser_bind= no
ldapvuser_timeout= 20
ldapvuser_search_base= dc=mydom,dc=com
ldapvuser_query_filter= (|(&(objectclass=SuSEVirtUserObject)(vaddress=%s))(&(objectclass=dNSZone)(relativeDomainName=@)(zoneName=%s)(MTALocaldomain=%s)))
ldapvuser_result_attribute= uid,MTALocaldomain
ldapvuser_scope= sub
Zeile:
Lesezeichen