wenn ich mp3 player anschliese sagt mein kernel viel, ist das normal?

**??Linux** · 28.08.04, 11:24

wenn ich mein mp3player anschliese sagt mein kernel viel hier ist die ganze ausgabe...(ist ziemlich viel)

Code:

Aug 28 12:18:13 MySystem ohci_hcd 0000:00:02.2: remote wakeup
Aug 28 12:18:13 MySystem usb 1-1: new full speed USB device using address 3
Aug 28 12:18:13 MySystem usb-storage: USB Mass Storage device detected
Aug 28 12:18:13 MySystem usb-storage: altsetting is 0, id_index is 92
Aug 28 12:18:13 MySystem usb-storage: -- associate_dev
Aug 28 12:18:13 MySystem usb-storage: Transport: Bulk
Aug 28 12:18:13 MySystem usb-storage: Protocol: Transparent SCSI
Aug 28 12:18:13 MySystem usb-storage: Endpoints: In: 0xc1718d54 Out: 0xc1718d68 Int: 0x00000000 (Period 0)
Aug 28 12:18:13 MySystem usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Aug 28 12:18:13 MySystem usb-storage: GetMaxLUN command result is 1, data is 0
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem scsi1 : SCSI emulation for USB Mass Storage devices
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Command INQUIRY (6 bytes)
Aug 28 12:18:13 MySystem usb-storage:  12 00 00 00 24 00
Aug 28 12:18:13 MySystem usb-storage: Bulk Command S 0x43425355 T 0xf L 36 F 128 Trg 0 LUN 0 CL 6
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 31/31
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk command transfer result=0
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 36/36
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk data transfer result 0x0
Aug 28 12:18:13 MySystem usb-storage: Attempting to get CSW...
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 13/13
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk status result = 0
Aug 28 12:18:13 MySystem usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0
Aug 28 12:18:13 MySystem usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 4
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x0
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Command INQUIRY (6 bytes)
Aug 28 12:18:13 MySystem usb-storage:  12 00 00 00 38 00
Aug 28 12:18:13 MySystem usb-storage: Bulk Command S 0x43425355 T 0x10 L 56 F 128 Trg 0 LUN 0 CL 6
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 31/31
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk command transfer result=0
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 56 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 56/56
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk data transfer result 0x0
Aug 28 12:18:13 MySystem usb-storage: Attempting to get CSW...
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 13/13
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk status result = 0
Aug 28 12:18:13 MySystem usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x0
Aug 28 12:18:13 MySystem usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 4
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x0
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem Vendor: SigmaTel  Model: MSCN              Rev: 0100
Aug 28 12:18:13 MySystem Type:   Direct-Access                      ANSI SCSI revision: 02
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Command TEST_UNIT_READY (6 bytes)
Aug 28 12:18:13 MySystem usb-storage:  00 00 00 00 00 00
Aug 28 12:18:13 MySystem usb-storage: Bulk Command S 0x43425355 T 0x11 L 0 F 0 Trg 0 LUN 0 CL 6
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 31/31
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk command transfer result=0
Aug 28 12:18:13 MySystem usb-storage: Attempting to get CSW...
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 13/13
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk status result = 0
Aug 28 12:18:13 MySystem usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x0
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Command READ_CAPACITY (10 bytes)
Aug 28 12:18:13 MySystem usb-storage:  25 00 00 00 00 00 00 00 00 00
Aug 28 12:18:13 MySystem usb-storage: Bulk Command S 0x43425355 T 0x12 L 8 F 128 Trg 0 LUN 0 CL 10
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 31/31
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk command transfer result=0
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 8/8
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk data transfer result 0x0
Aug 28 12:18:13 MySystem usb-storage: Attempting to get CSW...
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 13/13
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk status result = 0
Aug 28 12:18:13 MySystem usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x0
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x0
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem SCSI device sda: 503552 512-byte hdwr sectors (258 MB)
Aug 28 12:18:13 MySystem sda: assuming Write Enabled
Aug 28 12:18:13 MySystem sda: assuming drive cache: write through
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Command TEST_UNIT_READY (6 bytes)
Aug 28 12:18:13 MySystem usb-storage:  00 00 00 00 00 00
Aug 28 12:18:13 MySystem usb-storage: Bulk Command S 0x43425355 T 0x13 L 0 F 0 Trg 0 LUN 0 CL 6
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 31/31
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk command transfer result=0
Aug 28 12:18:13 MySystem usb-storage: Attempting to get CSW...
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 13/13
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk status result = 0
Aug 28 12:18:13 MySystem usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x0
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Aug 28 12:18:13 MySystem usb-storage:  1e 00 00 00 01 00
Aug 28 12:18:13 MySystem usb-storage: Bulk Command S 0x43425355 T 0x14 L 0 F 0 Trg 0 LUN 0 CL 6
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 31/31
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk command transfer result=0
Aug 28 12:18:13 MySystem usb-storage: Attempting to get CSW...
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 13/13
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk status result = 0
Aug 28 12:18:13 MySystem usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x1
Aug 28 12:18:13 MySystem usb-storage: -- transport indicates command failure
Aug 28 12:18:13 MySystem usb-storage: Issuing auto-REQUEST_SENSE
Aug 28 12:18:13 MySystem usb-storage: Bulk Command S 0x43425355 T 0x80000014 L 18 F 128 Trg 0 LUN 0 CL 6
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 31/31
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk command transfer result=0
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 18/18
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk data transfer result 0x0
Aug 28 12:18:13 MySystem usb-storage: Attempting to get CSW...
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 13/13
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk status result = 0
Aug 28 12:18:13 MySystem usb-storage: Bulk Status S 0x53425355 T 0x80000014 R 0 Stat 0x0
Aug 28 12:18:13 MySystem usb-storage: -- Result from auto-sense is 0
Aug 28 12:18:13 MySystem usb-storage: -- code: 0xf0, key: 0x5, ASC: 0x24, ASCQ: 0x0
Aug 28 12:18:13 MySystem usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x2
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem /dev/scsi/host1/bus0/target0/lun0:<7>usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Command READ_10 (10 bytes)
Aug 28 12:18:13 MySystem usb-storage:  28 00 00 00 00 00 00 00 08 00
Aug 28 12:18:13 MySystem usb-storage: Bulk Command S 0x43425355 T 0x15 L 4096 F 128 Trg 0 LUN 0 CL 10
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 31/31
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk command transfer result=0
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 4096/4096
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk data transfer result 0x0
Aug 28 12:18:13 MySystem usb-storage: Attempting to get CSW...
Aug 28 12:18:13 MySystem usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 28 12:18:13 MySystem usb-storage: Status code 0; transferred 13/13
Aug 28 12:18:13 MySystem usb-storage: -- transfer complete
Aug 28 12:18:13 MySystem usb-storage: Bulk status result = 0
Aug 28 12:18:13 MySystem usb-storage: Bulk Status S 0x53425355 T 0x15 R 0 Stat 0x0
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x0
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem p1
Aug 28 12:18:13 MySystem Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Bad target number (1:0)
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x40000
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Bad target number (2:0)
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x40000
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Bad target number (3:0)
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x40000
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Bad target number (4:0)
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x40000
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Bad target number (5:0)
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x40000
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Bad target number (6:0)
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x40000
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem usb-storage: queuecommand called
Aug 28 12:18:13 MySystem usb-storage: *** thread awakened.
Aug 28 12:18:13 MySystem usb-storage: Bad target number (7:0)
Aug 28 12:18:13 MySystem usb-storage: scsi cmd done, result=0x40000
Aug 28 12:18:13 MySystem usb-storage: *** thread sleeping.
Aug 28 12:18:13 MySystem USB Mass Storage device found at 3
Aug 28 12:18:14 MySystem scsi.agent[10887]: disk at /devices/pci0000:00/0000:00:02.2/usb1/1-1/1-1:1.0/host1/1:0:0:0
ug 28 12:17:52 MySystem usb-storage: -- usb_stor_release_resources finished

ich benutze kernel 2.6.7 ist das normal das der kernel so viel ausgibt wenn man einen mp3-player/stick anschliesst??
achja ich habe das ganze usb-zeug fest im kernel drinen....

achja der mp3-player läuft.... problemlos....

bye Benny

**pcdog** · 28.08.04, 19:51

meiner sagt auch viel
ich denke, wenn es läuft ist doch supper... was machst du dir sorgen

**Newbie314** · 22.03.15, 17:22

#3 als Spam gemeldet. Pinguins don't need painkillers as Linux does not generate headaches.

**reno** · 25.03.15, 15:49

Hast du den Kernel selber gebaut? Vielleicht hast du in der Config unter "Device Drivers"--->"USB Support" "USB Mass Storage verbose debug" aktiviert. Das braucht man eigentlich nicht.