was hab ich falsch gemacht ?

[traster]

hallo zusammen

mein system
amd 2000xp
512 mb ram
mb:leadtek k7ncr18d-pro2 /nforce2
soundnboard 6-channel/ac97
leadtek winfast 280/geforce 4800 ti / nvidia treiber installiert
b.s. mandrake 10 c kernel 2.6.3-4mdk

habe genau die anleitung
http://www.linuxforen.de/forums/show...threadid=26120
befolgt
allerdings sind die treiber jetzt schon neuer
nun hab ich aber gar kein sound mehr !
lautsprecher ind der kontroll-menueleiste ist mit einem roten kreuz versehen
wenn ich alsamixer Gui aufrufe bekomme ich die fehler meldung
function snd_ctl_open faild for default: No such device

kann mir jemand erklären wie ich wieder sound bekomme
mfg traster

[tooly]

Hallo Traster,

wenn das kmix Sysmbol ein rotes Kreuz hat, dann fehlt der Sound komplett.

Welchen Treiber nutzt Du denn?
Wie läßt Du den Treiber laden`
Hast Du mal mit dmesg nachgesehen ob evtl. eine Fehlermeldung kommt?

mfg
tooly

[traster]

sorry bin aber wieder aus suse 9.0 umgestiegen
bei der eingabe kommt folgende ausgabe

(SuSE Linux)) #1 Fri Mar 12 08:24:04 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
501MB vmalloc/ioremap area available.
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 Nvidia ) @ 0x000f7100
ACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x1fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x1fff7e80
ACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000
ACPI: Skipping APIC setup
Building zonelist for node : 0
Kernel command line: root=/dev/hda6 vga=0x317 desktop hdd=ide-scsi hddlun=0 splash=silent
ide_setup: hdd=ide-scsi
ide_setup: hddlun=0
bootsplash: silent mode.
Initializing CPU#0
Detected 1670.474 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3301.37 BogoMIPS
Memory: 514208k/524224k available (1728k kernel code, 9628k reserved, 605k data, 176k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xfb850, last bus=3
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16)
ACPI: PCI Interrupt Link [APC2] (IRQs 17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs 16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10
00:00:01[A] -> IRQ 10 Mode 1 Trigger 1
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
00:00:02[B] -> IRQ 11 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 9
00:00:02[C] -> IRQ 9 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
00:00:04[A] -> IRQ 5 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 9
PIC: IRQ (9) already programmed
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 5
PIC: IRQ (5) already programmed
ACPI: PCI Interrupt Link [L3CM] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LIDE] enabled at IRQ 9
PIC: IRQ (9) already programmed
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
PIC: IRQ (5) already programmed
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 9
PIC: IRQ (9) already programmed
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 5
PIC: IRQ (5) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 32764
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xd8000000, mapped to 0xe0818000, size 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:f000
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 22326 bytes, found (1024x768, 11098 bytes, v3).
bootsplash: silent jpeg found.
bootsplash: silent jpeg found.
Console: switching to colour frame buffer device 118x38
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci00:09.0
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
SiI3112 Serial ATA: IDE controller at PCI slot 01:0a.0
SiI3112 Serial ATA: chipset revision 1
SiI3112 Serial ATA: not 100% native mode: will probe irqs later
ide2: MMIO-DMA , BIOS settings: hdeio, hdfio
ide3: MMIO-DMA , BIOS settings: hdgio, hdhio
hda: Maxtor 4D040H2, ATA DISK drive
blk: queue c03e66c0, I/O limit 4095Mb (mask 0xffffffff)
hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
hdd: SONY CD-RW CRX175E2, ATAPI CD/DVD-ROM drive
hde: no response (status = 0xfe)
keyboard: unknown scancode e0 01
hdg: no response (status = 0xfe)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=4982/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 < hda5 hda6 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cryptoapi: loaded
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 350k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide0(3,6)) ...
for (ide0(3,6))
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 176k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding Swap: 511520k swap-space (priority 42)
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
hdc: attached ide-cdrom driver.
hdc: ATAPI 50X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX175E2 Rev: S002
Type: CD-ROM ANSI SCSI revision: 02
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
02:01.0: 3Com PCI 3c905C Tornado 2 at 0xb000. Vers LK1.1.16
00:26:54:0f:3e:7c, IRQ 10
product code ffff rev 00.0 date 15-31-127
Internal config register is 1600000, transceivers 0x40.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/MII interface.
MII transceiver found at address 0, status 786d.
Enabling bus-master transmits and whole-frame receives.
02:01.0: scatter/gather enabled. h/w checksums enabled
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
PCI: Setting latency timer of device 00:0d.0 to 64
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[e6083000-e60837ff] Max Packet=[2048]
ohci1394_0: SelfID received outside of bus reset sequence
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00300400010414c6]
raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.2 to 64
ehci_hcd 00:02.2: PCI device 10de:0068 (nVidia Corporation)
ehci_hcd 00:02.2: irq 9, pci mem e48d9000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:02.2 PCI cache line size corrected to 64.
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb-uhci.c: $Revision: 1.275 $ time 08:46:37 Mar 12 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xe48db000, IRQ 10
usb-ohci.c: usb-00:02.0, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xe48dd000, IRQ 11
usb-ohci.c: usb-00:02.1, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:02.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc00e) is not claimed by any active driver.
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (0 C)
IPsec Security Association Database (SADB): initialized.
IPsec Security Policy Database (SPD): initialized.
IPsec PF_KEY V2: initialized
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
IPv6 over IPv4 tunneling driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb2:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
eth0: no IPv6 routers present
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
Linux video capture interface: v1.00
PCI: Setting latency timer of device 00:06.0 to 64
intel8x0: clocking to 47423

kann jemand mal durchschauen ob da alles richtig ist und so wie es sein soll
mfg traster

[tooly]

Hallo,

warum machst Du das nicht selbst?
Aus dem Eintrag: intel8x0: clocking to 47423 siehst Du dass die Soundkarte zumindest erkannt wurde.

Prüf dochmal welche sound Module geladen sind und ob die Einträge in der modprobe.conf richtig sind

mfg
tooly