USB-Scannerinstallation auch ohne hotplug möglich?

Hallo!

Bitte helft mir!
Kann mir bitte jemand sagen, ob man hotplug unbedingt braucht um einen Scanner zu installieren?
Wenn man Sane backend und frontend richtig installiert. Scannen konnte ich schon mit meinem Scanner.
Jedoch das Problem bei Suse 8.0 ist, das der Scanner nach Neuinstallation des Linux-Systems und der Sane-Module backend und frontend zwar scannt, aber nach einem System-Neustart der Scanner immer mit der Meldung "device busy" den Dienst versagt.
von scanimage -L wird der Scanner korrekt mit vendor und product ID erkannt. Der Treiber ist geladen.

Wie hat man einen USB-Scanner installiert bevor es hotplug gab?
Heute habe ich alle hotplug-Dateien angeschaut. Ich bin zu keinem Ergebnis gekommen. Das ganze ist ja wie
ein Alptraum. Ich scanne und weiß, wenn ich jetzt meinen PC herunterfahre kann ich meinen Scanner vergessen.
Aber ich weiß nicht wie und was ich verändern muß. Ich habe nach einer Konfigurationsdatei gesucht, wo man vielleicht
etwas eintragen kann. Ich glaub in /etc/sysconfig/hotplug kann man hotplug stoppen. Aber ich komme einfach nicht weiter.

cat var/log/messages:
Oct 26 01:30:45 linux pppd[1983]: rcvd [IPCP ConfAck id=0x3 <addr 62.246.27.20>]
Oct 26 01:30:45 linux pppd[1983]: local IP address 62.246.27.20
Oct 26 01:30:45 linux pppd[1983]: remote IP address 194.112.16.73
Oct 26 01:30:45 linux pppd[1983]: Script /etc/ppp/ip-up started (pid 1987)
Oct 26 01:30:45 linux pppd[1983]: Script /etc/ppp/ip-up finished (pid 1987), status = 0x0
Oct 26 01:30:46 linux kernel: usb.c: registered new driver usbscanner
Oct 26 01:30:46 linux kernel: scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product - 4a9:2204
Oct 26 01:30:46 linux kernel: scanner.c: 0.4.6:USB Scanner Driver
Oct 26 01:30:46 linux kernel: klogd 1.4.1, ---------- state change ----------
Oct 26 01:30:46 linux kernel: Inspecting /boot/System.map-2.4.18-4GB
Oct 26 01:30:47 linux kernel: Loaded 12771 symbols from /boot/System.map-2.4.18-4GB.
Oct 26 01:30:47 linux kernel: Symbols match kernel version 2.4.18.
Oct 26 01:30:47 linux kernel: Loaded 788 symbols from 31 modules.

Während sane-find-scanner -v meinen Scanner unter /dev/usbscanner findet und nach Eingabe von scanimage erhalte ich merkwürdige Meldungen in /var/log/messages

Oct 26 01:39:54 linux pppd[1983]: sent [LCP EchoRep id=0x36 magic=0xb0aff0ab]
Oct 26 01:40:04 linux pppd[1983]: rcvd [LCP EchoReq id=0x37 magic=0x3a063b96]
Oct 26 01:40:04 linux pppd[1983]: sent [LCP EchoRep id=0x37 magic=0xb0aff0ab]
Oct 26 01:40:08 linux kernel: usb_control/bulk_msg: timeout
Oct 26 01:40:08 linux kernel: scanner.c: write_scanner: NAK received.
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(1): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(2): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(3): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(4): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(5): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(6): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(7): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(1): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(2): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(3): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(4): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(5): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(6): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(7): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(1): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(2): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(3): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(4): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(5): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(6): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(7): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(1): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(2): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(3): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(4): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(5): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(6): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(7): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(1): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(2): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(3): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(4): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(5): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(6): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(7): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(1): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(2): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(3): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(4): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(5): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(6): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(7): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(1): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(2): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(3): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(4): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(5): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(6): Unable to access minor data
Oct 26 01:40:08 linux kernel: scanner.c: open_scanner(7): Unable to access minor data
Oct 26 01:40:14 linux pppd[1983]: rcvd [LCP EchoReq id=0x38 magic=0x3a063b96]
Oct 26 01:40:14 linux pppd[1983]: sent [LCP EchoRep id=0x38 magic=0xb0aff0ab]
Oct 26 01:40:14 linux pppd[1983]: sent [LCP EchoReq id=0x13 magic=0xb0aff0ab]
Oct 26 01:40:14 linux pppd[1983]: rcvd [LCP EchoRep id=0x13 magic=0x3a063b96]
Oct 26 01:40:24 linux pppd[1983]: rcvd [LCP EchoReq id=0x39 magic=0x3a063b96]
Oct 26 01:40:24 linux pppd[1983]: sent [LCP EchoRep id=0x39 magic=0xb0aff0ab]
Oct 26 01:40:34 linux pppd[1983]: rcvd [LCP EchoReq id=0x3a magic=0x3a063b96]
Oct 26 01:40:34 linux pppd[1983]: sent [LCP EchoRep id=0x3a magic=0xb0aff0ab]
Oct 26 01:40:44 linux pppd[1983]: rcvd [LCP EchoReq id=0x3b magic=0x3a063b96]
Oct 26 01:40:44 linux pppd[1983]: sent [LCP EchoRep id=0x3b magic=0xb0aff0ab]
Oct 26 01:40:44 linux pppd[1983]: sent [LCP EchoReq id=0x14 magic=0xb0aff0ab]
Oct 26 01:40:44 linux pppd[1983]: rcvd [LCP EchoRep id=0x14 magic=0x3a063b96]
Oct 26 01:40:54 linux pppd[1983]: rcvd [LCP EchoReq id=0x3c magic=0x3a063b96]
Oct 26 01:40:54 linux pppd[1983]: sent [LCP EchoRep id=0x3c magic=0xb0aff0ab]
Oct 26 01:40:55 linux kernel: scanner.c: open_scanner(1): Unable to access minor data
Oct 26 01:40:55 linux kernel: scanner.c: open_scanner(2): Unable to access minor data
Oct 26 01:40:55 linux kernel: scanner.c: open_scanner(3): Unable to access minor data
Oct 26 01:40:55 linux kernel: scanner.c: open_scanner(4): Unable to access minor data
Oct 26 01:40:55 linux kernel: scanner.c: open_scanner(5): Unable to access minor data
Oct 26 01:40:55 linux kernel: scanner.c: open_scanner(5): Unable to access minor data
Oct 26 01:40:55 linux kernel: scanner.c: open_scanner(7): Unable to access minor data
Oct 26 01:41:04 linux pppd[1983]: rcvd [LCP EchoReq id=0x3d magic=0x3a063b96]
Oct 26 01:41:04 linux pppd[1983]: sent [LCP EchoRep id=0x3d magic=0xb0aff0ab]
Oct 26 01:41:14 linux pppd[1983]: rcvd [LCP EchoReq id=0x3e magic=0x3a063b96]
Oct 26 01:41:14 linux pppd[1983]: sent [LCP EchoRep id=0x3e magic=0xb0aff0ab]
Oct 26 01:41:14 linux pppd[1983]: sent [LCP EchoReq id=0x15 magic=0xb0aff0ab]
Oct 26 01:41:14 linux pppd[1983]: rcvd [LCP EchoRep id=0x15 magic=0x3a063b96]
Oct 26 01:41:24 linux pppd[1983]: rcvd [LCP EchoReq id=0x3f magic=0x3a063b96]
Oct 26 01:41:24 linux pppd[1983]: sent [LCP EchoRep id=0x3f magic=0xb0aff0ab]
Oct 26 01:41:34 linux pppd[1983]: rcvd [LCP EchoReq id=0x40 magic=0x3a063b96]
Oct 26 01:41:34 linux pppd[1983]: sent [LCP EchoRep id=0x40 magic=0xb0aff0ab]
Oct 26 01:41:44 linux pppd[1983]: rcvd [LCP EchoReq id=0x41 magic=0x3a063b96]
Oct 26 01:41:44 linux pppd[1983]: sent [LCP EchoRep id=0x41 magic=0xb0aff0ab]
Oct 26 01:41:44 linux pppd[1983]: sent [LCP EchoReq id=0x16 magic=0xb0aff0ab]
Oct 26 01:41:44 linux pppd[1983]: rcvd [LCP EchoRep id=0x16 magic=0x3a063b96]

Oct 25 23:36:40 linux pppd[1039]: Sent 8426 bytes, received 44236 bytes.
Oct 25 23:36:40 linux pppd[1039]: Exit.
Oct 25 23:36:43 linux /sbin/hotplug[1127]: /etc/hotplug/net.agent: dev: command not found
Oct 25 23:36:50 linux kernel: usb_control/bulk_msg: timeout
Oct 25 23:37:10 linux kernel: usb_control/bulk_msg: timeout
Oct 25 23:37:10 linux kernel: scanner.c: read_scanner(0): excessive NAK's received
Oct 25 23:38:10 linux kernel: usb_control/bulk_msg: timeout
Oct 25 23:38:10 linux kernel: scanner.c: write_scanner: NAK received.
Oct 25 23:39:10 linux kernel: usb_control/bulk_msg: timeout
Oct 25 23:39:10 linux kernel: scanner.c: write_scanner: NAK received.
Oct 25 23:39:10 linux kernel: scanner.c: open_scanner(1): Unable to access minor data
Oct 25 23:39:10 linux kernel: scanner.c: open_scanner(2): Unable to access minor data
Oct 25 23:39:10 linux kernel: scanner.c: open_scanner(3): Unable to access minor data

25 23:20:55 linux kernel: lp0: using parport0 (polling).
Oct 25 23:20:55 linux kernel: lp0: compatibility mode
Oct 25 23:20:55 linux last message repeated 2 times
Oct 25 23:20:57 linux /etc/hotplug/net.agent[547]: No HW description found ... exiting
Oct 25 23:27:19 linux kdm[811]: pam_unix2: session started for user bernd, service xdm
Okt 25 23:32:04 linux su: (to root) bernd on /dev/pts/1
Okt 25 23:32:04 linux su: pam_unix2: session started for user root, service su
Oct 25 23:32:35 linux kernel: usb.c: registered new driver usbscanner
Oct 25 23:32:35 linux kernel: scanner.c: 0.4.6:USB Scanner Driver
Oct 25 23:32:46 linux kernel: scanner.c: open_scanner(0): Unable to access minor data
Oct 25 23:32:46 linux kernel: scanner.c: open_scanner(1): Unable to access minor data

ct 25 23:39:11 linux kernel: scanner.c: open_scanner(7): Unable to access minor data
Okt 25 23:39:28 linux /sbin/hotplug[1153]: no runnable /etc/hotplug/-V.agent is installed
Okt 25 23:39:55 linux /sbin/hotplug[1183]: no runnable /etc/hotplug/stop.agent is installed
Oct 25 23:40:24 linux kernel: usb.c: deregistering driver usbscanner
Oct 25 23:50:12 linux gconfd (bernd-1095): GConf server is not in use, shutting down.
Oct 25 23:50:12 linux gconfd (bernd-1095): Exiting
Okt 25 23:57:03 linux su: pam_unix2: session finished for user root, service su

Oct 26 01:37:07 linux insmod: /lib/modules/2.4.18-4GB/kernel/drivers/media/video/bttv.o: init_module: No such device
Oct 26 01:37:07 linux insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
Oct 26 01:37:07 linux insmod: /lib/modules/2.4.18-4GB/kernel/drivers/media/video/bttv.o: insmod char-major-81 failed
Oct 26 01:37:07 linux kernel: Linux video capture interface: v1.00
Oct 26 01:37:07 linux kernel: i2c-core.o: i2c core module version 2.6.2 (20011118)
Oct 26 01:37:07 linux kernel: i2c-algo-bit.o: i2c bit algorithm module version 2.6.2 (20011118)
Oct 26 01:37:07 linux kernel: bttv: driver version 0.7.83 loaded
Oct 26 01:37:07 linux kernel: bttv: using 2 buffers with 2080k (4160k total) for capture
Oct 26 01:37:07 linux kernel: bttv: Host bridge is PCI device 10b9:1541
Oct 26 01:37:07 linux insmod: /lib/modules/2.4.18-4GB/kernel/drivers/media/video/bttv.o: init_module: No such device
Oct 26 01:37:07 linux insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
Oct 26 01:37:07 linux insmod: /lib/modules/2.4.18-4GB/kernel/drivers/media/video/bttv.o: insmod char-major-81 failed
Oct 26 01:37:07 linux kernel: Linux video capture interface: v1.00
Oct 26 01:37:07 linux kernel: i2c-core.o: i2c core module version 2.6.2 (20011118)
Oct 26 01:37:07 linux kernel: i2c-algo-bit.o: i2c bit algorithm module version 2.6.2 (20011118)
Oct 26 01:37:07 linux kernel: bttv: driver version 0.7.83 loaded
Oct 26 01:37:07 linux kernel: bttv: using 2 buffers with 2080k (4160k total) for capture
Oct 26 01:37:07 linux kernel: bttv: Host bridge is PCI device 10b9:1541
Oct 26 01:37:07 linux insmod: /lib/modules/2.4.18-4GB/kernel/drivers/media/video/bttv.o: init_module: No such device
Oct 26 01:37:07 linux insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
Oct 26 01:37:07 linux insmod: /lib/modules/2.4.18-4GB/kernel/drivers/media/video/bttv.o: insmod char-major-81 failed
Oct 26 01:37:07 linux kernel: scanner.c: open_scanner(1): Unable to access minor data
Oct 26 01:37:07 linux kernel: scanner.c: open_scanner(2


Weiß vielleicht jemand was das bedeutet?

Viele Grüße
N.

Schau mal als root mit "chkconfig" nach, ob hotplug läuft.
Abschalten kannst Du es mit "chkconfig hotplug off"


Versuch's mal hiermit:
http://www.khk.net/sane/usb_scanner.html