beim Start ausgelastet...

Druckbare Version

27.09.05, 15:33
Bayerfans04

beim Start ausgelastet...

Hallo,
ich woltle gestern mein Linux starten, KDE hat aufgebaut und als die ersten Programme vom Autostart noch gar nicht richtig fertig geladen waren (darunter sind gkrellm und firefox) konnte ich fast nicht mehr die maus bewegen. mein gkrellm hat angezeigt: 100% CPU auslast und mein Speicher (1 GB DDR) ist auch völlig belegt! Wenn ich die Maus bewegt habe, konntei ch erst nach 2 Minuten eine Veränderung erkennen. Das Starten einer Konsole etc. wäre fast unmöglich gewesen!
Aber ich habe auch schon eine Ahnung was es sein könnte. Das passiert erst, wenn die Programme geladen werden und bevor alles geladen wurde, hab ich ganz schnell die Konsole geöffnet und konnte per top sehen, welches Programm für diese imense Auslastung Auslastung zuständig ist. Wenige Sekunden danach hat mein Rechner nicht mehr reagiert...
Das Ergebnis: gs und foomatic-rip waren die zwei, die die ganzen Resourcen verbraucht haben.
heute früh habe ich meinen rechner angemacht und ihn laufen lassen, in der hoffnung, wenn er mehrere stunden so stark arbeitet, vielleicht hört es dann auch mal auf (vorher hatte ich das schopn vergebens mit 20 min ausprobiert). als ich jetzt wiedergekommen bin, ca. 10h später konnte ich wieder an meinen rechner! d.h. Speicher war wieder wunderbar frei, das Problem lag an der CPU, Auslastung: immer noch 99-100%.
top sagte mir, dass gs dran schuld ist, nachdem ich das beendet habe, per pkill, ging auch alles wieder normal, so wie früher. foomatic-rip war aber schon beendet!
ich nehme also an, dass foomatic-rip (Beschreibung von man: "Universal print filter/RIP wrapper") für die RAM Auslastung zuständig war und gs (=Ghostscript, für PDF Dateien) für die CPU Auslastung.

## da ich leider die Logs nicht hier herein schreiben kann, weil die zu groß sind, poste ich sie in die 1. antwort!

Ich glaube zwar nicht, dass euch die Logs so sonderlich interressieren, aber manchmal findet man darin auch was wissenswertes, aber dazu ist es vielleicht auch zu unübersichtlich...

OK, also nun die Fragen: ich hatte kürzlich ein Drucker installiert, hängt das irgendwie mit foomatic-rip zusammen, dass das automatisch gestartet wurde? Wie kann ich meinem Linux sagen, dass er am Anfang gs und foomatic-rip nicht starten soll, oder wenn das nicht geht, wie kann ich gleich in den Autostart die Befehle "pkill foomatic-rip", bzw. "pkill gs" schreiben?

Wäre euch unendlich dankbar, wenn ihr mir helfen könntet!
27.09.05, 15:36
Bayerfans04

ok, hier die versprochenen Logs:

Code:

BOOT LOG: Sep 27 05:47:49 localhost syslog: Starten von syslogd succeeded Sep 27 05:47:49 localhost syslog: Starten von klogd succeeded Sep 27 05:47:50 localhost irqbalance: Starten von irqbalance succeeded Sep 27 05:47:50 localhost portmap: Starten von portmap succeeded Sep 27 05:47:50 localhost nfslock: Starten von rpc.statd succeeded Sep 27 05:47:51 localhost rpcidmapd: Starten von rpc.idmapd succeeded Sep 27 05:47:44 localhost rc: readahead_early starten: succeeded Sep 27 05:47:51 localhost netfs: Andere Dateisysteme einhängen: succeeded Sep 27 05:47:51 localhost rc: lm_sensors starten: succeeded Sep 27 05:47:51 localhost autofs: automount startup succeeded Sep 27 05:47:52 localhost mDNSResponder: Starten von succeeded Sep 27 05:47:53 localhost smartd: Starten von smartd failed //### Kommentar von mir: dieser Fehler kommt erst seit gestern! Sep 27 05:47:53 localhost acpid: Starten von acpid succeeded Sep 27 05:47:57 localhost cups: Starten von cupsd succeeded Sep 27 05:47:58 localhost sshd: succeeded Sep 27 05:47:58 localhost xinetd: Starten von xinetd succeeded Sep 27 05:48:04 localhost sendmail: Starten von sendmail succeeded Sep 27 05:48:05 localhost sendmail: Starten von sm-client succeeded Sep 27 05:48:05 localhost gpm: Starten von gpm succeeded Sep 27 05:48:05 localhost crond: Starten von crond succeeded Sep 27 05:48:07 localhost xfs: Starten von xfs succeeded Sep 27 05:48:07 localhost anacron: Starten von anacron succeeded Sep 27 05:48:08 localhost atd: Starten von atd succeeded Sep 27 05:48:08 localhost readahead: Hintergrund-readahead starten: Sep 27 05:48:09 localhost rc: readahead starten: succeeded Sep 27 05:48:09 localhost messagebus: Starten von messagebus succeeded Sep 27 05:48:09 localhost cups-config-daemon: Starten von cups-config-daemon succeeded Sep 27 05:48:09 localhost haldaemon: Starten von haldaemon succeeded Sep 27 05:48:10 localhost wine: Registering binary handler for Windows applications Sep 27 05:48:10 localhost rc: wine starten: succeeded Sep 27 16:03:50 localhost NET: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf CRON LOG: Sep 27 05:48:05 localhost crond[2265]: (CRON) STARTUP (V5.0) Sep 27 05:48:07 localhost anacron[2301]: Anacron 2.3 started on 2005-09-27 Sep 27 05:48:09 localhost anacron[2301]: Will run job `cron.daily' in 65 min. Sep 27 05:48:09 localhost anacron[2301]: Jobs will be executed sequentially Sep 27 06:14:20 localhost crond[3265]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 06:53:07 localhost anacron[2301]: Job `cron.daily' started Sep 27 06:54:40 localhost anacron[3765]: Updated timestamp for job `cron.daily' to 2005-09-27 Sep 27 07:01:01 localhost crond[3959]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 07:38:59 localhost anacron[2301]: Job `cron.daily' terminated Sep 27 07:38:59 localhost anacron[2301]: Normal exit (1 jobs run) Sep 27 08:01:01 localhost crond[4844]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 09:01:01 localhost crond[5612]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 10:01:01 localhost crond[6379]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 11:01:01 localhost crond[7147]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 12:01:01 localhost crond[7914]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 13:01:01 localhost crond[8682]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 14:01:01 localhost crond[9449]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 15:01:01 localhost crond[10217]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 16:01:02 localhost crond[10984]: (root) CMD (run-parts /etc/cron.hourly) Sep 27 16:22:44 localhost crontab[11567]: (frank) LIST (frank) KERNEL START-LOG: Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 1023MB LOWMEM available. zapping low mappings. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 258032 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f76f0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0 ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x3fff94c0 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff95c0 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff9400 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=023d5000 soft=023d4000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2070.536 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 1034184k/1048512k available (2068k kernel code, 13568k reserved, 647k data, 144k init, 0k highmem) Calibrating delay loop... 4104.19 BogoMIPS (lpj=2052096) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078bf3ff e3d3fbff 00000000 00000010 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Edge set to Level Trigger. checking if image is initramfs... it is Freeing initrd memory: 470k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xfba10, last bus=5 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 3 ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LACI] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 3 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 3 ACPI: PCI interrupt 0000:05:07.0[A] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1127800012.917:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 6ECDA687281A73E5 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Thermal Zone [THRM] (40 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST340015A, ATA DISK drive hdb: ExcelStor Technology`J880, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON LTR-48246K, ATAPI CD/DVD-ROM drive hdd: TOSHIBA DVD-ROM SD-M1222, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 > hdb: max request size: 1024KiB hdb: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133) hdb: cache flushes supported hdb:hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: DMA disabled ide0: reset: success hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown ide0: reset: success hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown end_request: I/O error, dev hdb, sector 0 Buffer I/O error on device hdb, logical block 0 hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown ide0: reset: success hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown ide0: reset: success hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown end_request: I/O error, dev hdb, sector 0 Buffer I/O error on device hdb, logical block 0 hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown ide0: reset: success hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown ide0: reset: success hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown end_request: I/O error, dev hdb, sector 0 Buffer I/O error on device hdb, logical block 0 unable to read partition table hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33) ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 37449) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S3 S4 S5) ACPI wakeup devices: HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 Freeing unused kernel memory: 144k freed SCSI subsystem initialized libata version 1.02 loaded. sata_nv version 0.03 ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 11 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 11 ata1: no device found (phy stat 00000000) scsi0 : sata_nv ata2: no device found (phy stat 00000000) scsi1 : sata_nv ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 5 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 5 ata3: no device found (phy stat 00000000) scsi2 : sata_nv ata4: no device found (phy stat 00000000) scsi3 : sata_nv EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: hda3: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 2361491 ext3_orphan_cleanup: deleting unreferenced inode 2361494 EXT3-fs: hda3: 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 4 roles, 280 types, 16 bools security: 53 classes, 5494 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev hda3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.9-1.667 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29. ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 3 (level, low) -> IRQ 3 PCI: Setting latency timer of device 0000:00:0a.0 to 64 divert: allocating divert_blk for eth0 eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 49553 usecs intel8x0: clocking to 46791 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:02.1: EHCI Host Controller PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: irq 5, pci mem 42878000 SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:02.0: OHCI Host Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 11, pci mem 428b0000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device 02369a00(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 nvidia: no version for "struct_module" found: kernel tainted. nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI interrupt 0000:05:07.0[A] -> GSI 3 (level, low) -> IRQ 3 PCI: Enabling device 0000:01:00.0 (0000 -> 0002) ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7667 Fri Jun 17 07:01:04 PDT 2005 spurious 8259A interrupt: IRQ7. ACPI: Power Button (FF) [PWRF] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown ide0: reset: success EXT3 FS on hda3, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com cdrom: open failed. cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 104380k swap on /dev/hda5. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts SICHERHEITSLOG: Sep 27 05:47:58 localhost sshd[2200]: Server listening on :: port 22. Sep 27 05:47:58 localhost sshd[2200]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use. Sep 27 16:21:13 localhost userhelper[11537]: pam_timestamp: updated timestamp file `/var/run/sudo/frank/unknown:root' Sep 27 16:21:13 localhost userhelper[11541]: running '/usr/share/system-logviewer/system-logviewer.py' with root privileges on behalf of 'frank' Sep 27 16:22:30 localhost userhelper[11559]: pam_timestamp: timestamp file `/var/run/sudo/frank/unknown:root' is only 77 seconds old, allowing access to up2date-config for UID 500 Sep 27 16:22:30 localhost userhelper[11559]: pam_timestamp: updated timestamp file `/var/run/sudo/frank/unknown:root' Sep 27 16:22:30 localhost userhelper[11562]: running '/usr/sbin/up2date-config' with root privileges on behalf of 'frank' Sep 27 16:23:05 localhost userhelper[11574]: pam_timestamp: timestamp file `/var/run/sudo/frank/unknown:root' is only 35 seconds old, allowing access to gdmsetup for UID 500 Sep 27 16:23:05 localhost userhelper[11574]: pam_timestamp: updated timestamp file `/var/run/sudo/frank/unknown:root' Sep 27 16:23:05 localhost userhelper[11578]: running '/usr/sbin/gdmsetup' with root privileges on behalf of 'frank' Sep 27 16:23:22 localhost userhelper[11585]: pam_timestamp: timestamp file `/var/run/sudo/frank/unknown:root' is only 17 seconds old, allowing access to system-config-authentication for UID 500 Sep 27 16:23:22 localhost userhelper[11585]: pam_timestamp: updated timestamp file `/var/run/sudo/frank/unknown:root' Sep 27 16:23:22 localhost userhelper[11588]: running '/usr/share/authconfig/authconfig-gtk.py' with root privileges on behalf of 'frank' Sep 27 16:25:16 localhost userhelper[11626]: pam_timestamp: timestamp file `/var/run/sudo/frank/unknown:root' is only 114 seconds old, allowing access to system-logviewer for UID 500 Sep 27 16:25:16 localhost userhelper[11626]: pam_timestamp: updated timestamp file `/var/run/sudo/frank/unknown:root' Sep 27 16:25:16 localhost userhelper[11629]: running '/usr/share/system-logviewer/system-logviewer.py' with root privileges on behalf of 'frank'
27.09.05, 15:39
Bayerfans04

und es geht weiter...

Code:

SYSTEMLOG Sep 27 05:47:49 localhost syslogd 1.4.1: restart. Sep 27 05:47:49 localhost syslog: Starten von syslogd succeeded Sep 27 05:47:49 localhost syslog: Starten von klogd succeeded Sep 27 05:47:49 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started. Sep 27 05:47:49 localhost kernel: Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004 Sep 27 05:47:49 localhost kernel: BIOS-provided physical RAM map: Sep 27 05:47:49 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 27 05:47:49 localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 27 05:47:49 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 27 05:47:49 localhost kernel: BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 27 05:47:49 localhost kernel: BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 27 05:47:49 localhost kernel: BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 27 05:47:49 localhost kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Sep 27 05:47:49 localhost kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Sep 27 05:47:50 localhost kernel: 0MB HIGHMEM available. Sep 27 05:47:50 localhost kernel: 1023MB LOWMEM available. Sep 27 05:47:50 localhost kernel: zapping low mappings. Sep 27 05:47:50 localhost irqbalance: Starten von irqbalance succeeded Sep 27 05:47:50 localhost kernel: DMI 2.3 present. Sep 27 05:47:50 localhost portmap: Starten von portmap succeeded Sep 27 05:47:50 localhost kernel: ACPI: PM-Timer IO Port: 0x4008 Sep 27 05:47:50 localhost kernel: Built 1 zonelists Sep 27 05:47:50 localhost kernel: Kernel command line: ro root=LABEL=/ rhgb quiet Sep 27 05:47:50 localhost kernel: mapped 4G/4G trampoline to ffff4000. Sep 27 05:47:50 localhost kernel: Initializing CPU#0 Sep 27 05:47:50 localhost kernel: CPU 0 irqstacks, hard=023d5000 soft=023d4000 Sep 27 05:47:50 localhost kernel: PID hash table entries: 4096 (order: 12, 65536 bytes) Sep 27 05:47:50 localhost kernel: Detected 2070.536 MHz processor. Sep 27 05:47:50 localhost kernel: Using tsc for high-res timesource Sep 27 05:47:50 localhost kernel: Console: colour VGA+ 80x25 Sep 27 05:47:50 localhost kernel: Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Sep 27 05:47:50 localhost kernel: Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 27 05:47:50 localhost kernel: Memory: 1034184k/1048512k available (2068k kernel code, 13568k reserved, 647k data, 144k init, 0k highmem) Sep 27 05:47:50 localhost kernel: Security Scaffold v1.0.0 initialized Sep 27 05:47:50 localhost kernel: SELinux: Initializing. Sep 27 05:47:50 localhost kernel: SELinux: Starting in permissive mode Sep 27 05:47:50 localhost kernel: There is already a security framework initialized, register_security failed. Sep 27 05:47:50 localhost kernel: selinux_register_security: Registering secondary module capability Sep 27 05:47:50 localhost kernel: Capability LSM initialized as secondary Sep 27 05:47:50 localhost kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Sep 27 05:47:50 localhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 27 05:47:50 localhost kernel: CPU: L2 Cache: 512K (64 bytes/line) Sep 27 05:47:50 localhost kernel: Intel machine check architecture supported. Sep 27 05:47:50 localhost kernel: Intel machine check reporting enabled on CPU#0. Sep 27 05:47:50 localhost kernel: CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 Sep 27 05:47:50 localhost kernel: Enabling fast FPU save and restore... done. Sep 27 05:47:50 localhost kernel: Enabling unmasked SIMD FPU exception support... done. Sep 27 05:47:50 localhost kernel: Checking 'hlt' instruction... OK. Sep 27 05:47:50 localhost kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger. Sep 27 05:47:50 localhost kernel: checking if image is initramfs... it is Sep 27 05:47:50 localhost kernel: Freeing initrd memory: 470k freed Sep 27 05:47:50 localhost kernel: NET: Registered protocol family 16 Sep 27 05:47:50 localhost kernel: PCI: PCI BIOS revision 3.00 entry at 0xfba10, last bus=5 Sep 27 05:47:50 localhost kernel: PCI: Using MMCONFIG Sep 27 05:47:50 localhost kernel: mtrr: v2.0 (20020519) Sep 27 05:47:50 localhost kernel: ACPI: Subsystem revision 20040816 Sep 27 05:47:50 localhost kernel: ACPI: Interpreter enabled Sep 27 05:47:50 localhost kernel: ACPI: Using PIC for interrupt routing Sep 27 05:47:50 localhost kernel: ACPI: PCI Root Bridge [PCI0] (00:00) Sep 27 05:47:50 localhost kernel: PCI: Probing PCI hardware (bus 00) Sep 27 05:47:50 localhost rpc.statd[1995]: Version 1.0.6 Starting Sep 27 05:47:50 localhost kernel: PCI: Transparent bridge - 0000:00:09.0 Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. Sep 27 05:47:50 localhost nfslock: Starten von rpc.statd succeeded Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15) Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15) Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15) Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15) Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Sep 27 05:47:50 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Sep 27 05:47:50 localhost kernel: usbcore: registered new driver usbfs Sep 27 05:47:50 localhost kernel: usbcore: registered new driver hub Sep 27 05:47:50 localhost kernel: PCI: Using ACPI for IRQ routing Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 3 Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 3 (level, low) -> IRQ 3 Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11 Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5 Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5 Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LACI] enabled at IRQ 5 Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5 Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11 Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11 Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5 Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5 Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 3 Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 3 (level, low) -> IRQ 3 Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 3 Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:05:07.0[A] -> GSI 3 (level, low) -> IRQ 3 Sep 27 05:47:50 localhost kernel: ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 Sep 27 05:47:50 localhost kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 Sep 27 05:47:50 localhost kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 27 05:47:50 localhost kernel: apm: overridden by ACPI. Sep 27 05:47:50 localhost kernel: audit: initializing netlink socket (disabled) Sep 27 05:47:50 localhost kernel: audit(1127800012.917:0): initialized Sep 27 05:47:50 localhost kernel: Total HugeTLB memory allocated, 0 Sep 27 05:47:50 localhost kernel: VFS: Disk quotas dquot_6.5.1 Sep 27 05:47:50 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 27 05:47:50 localhost kernel: SELinux: Registering netfilter hooks Sep 27 05:47:50 localhost kernel: Initializing Cryptographic API Sep 27 05:47:50 localhost kernel: ksign: Installing public key data Sep 27 05:47:50 localhost kernel: Loading keyring Sep 27 05:47:50 localhost kernel: - Added public key 6ECDA687281A73E5 Sep 27 05:47:50 localhost kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key) Sep 27 05:47:50 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 27 05:47:50 localhost kernel: vesafb: probe of vesafb0 failed with error -6 Sep 27 05:47:50 localhost kernel: ACPI: Fan [FAN] (on) Sep 27 05:47:50 localhost kernel: ACPI: Processor [CPU0] (supports C1) Sep 27 05:47:50 localhost kernel: ACPI: Thermal Zone [THRM] (40 C) Sep 27 05:47:50 localhost kernel: isapnp: Scanning for PnP cards... Sep 27 05:47:50 localhost kernel: isapnp: No Plug & Play device found Sep 27 05:47:50 localhost kernel: Real Time Clock Driver v1.12 Sep 27 05:47:50 localhost kernel: Linux agpgart interface v0.100 (c) Dave Jones Sep 27 05:47:50 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 27 05:47:51 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 27 05:47:51 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled Sep 27 05:47:51 localhost rpcidmapd: Starten von rpc.idmapd succeeded Sep 27 05:47:51 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 27 05:47:51 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 27 05:47:51 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 27 05:47:51 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 27 05:47:51 localhost kernel: NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 Sep 27 05:47:51 localhost kernel: NFORCE-CK804: chipset revision 242 Sep 27 05:47:51 localhost kernel: NFORCE-CK804: not 100%% native mode: will probe irqs later Sep 27 05:47:51 localhost kernel: NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller Sep 27 05:47:51 localhost kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA Sep 27 05:47:51 localhost kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Sep 27 05:47:51 localhost kernel: hda: ST340015A, ATA DISK drive Sep 27 05:47:51 localhost kernel: hdb: ExcelStor Technology`J880, ATA DISK drive Sep 27 05:47:51 localhost kernel: Using cfq io scheduler Sep 27 05:47:51 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 27 05:47:51 localhost kernel: hdc: LITE-ON LTR-48246K, ATAPI CD/DVD-ROM drive Sep 27 05:47:51 localhost kernel: hdd: TOSHIBA DVD-ROM SD-M1222, ATAPI CD/DVD-ROM drive Sep 27 05:47:51 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15 Sep 27 05:47:51 localhost kernel: hda: max request size: 128KiB Sep 27 05:47:51 localhost kernel: hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 27 05:47:51 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 > Sep 27 05:47:51 localhost kernel: hdb: max request size: 1024KiB Sep 27 05:47:51 localhost kernel: hdb: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133) Sep 27 05:47:51 localhost kernel: hdb:hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hda: DMA disabled Sep 27 05:47:51 localhost kernel: ide0: reset: success Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: ide0: reset: success Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: end_request: I/O error, dev hdb, sector 0 Sep 27 05:47:51 localhost kernel: Buffer I/O error on device hdb, logical block 0 Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:44 localhost rc: readahead_early starten: succeeded Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost netfs: Andere Dateisysteme einhängen: succeeded Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: ide0: reset: success Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: ide0: reset: success Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost rc: lm_sensors starten: succeeded Sep 27 05:47:51 localhost kernel: end_request: I/O error, dev hdb, sector 0 Sep 27 05:47:51 localhost kernel: Buffer I/O error on device hdb, logical block 0 Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:51 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost autofs: automount startup succeeded Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:52 localhost kernel: ide0: reset: success Sep 27 05:47:52 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:52 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:52 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:52 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:52 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:52 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:52 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:52 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:52 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:52 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:52 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:52 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:52 localhost kernel: ide0: reset: success Sep 27 05:47:52 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:52 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:52 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:52 localhost kernel: end_request: I/O error, dev hdb, sector 0 Sep 27 05:47:52 localhost kernel: Buffer I/O error on device hdb, logical block 0 Sep 27 05:47:52 localhost kernel: unable to read partition table Sep 27 05:47:52 localhost kernel: hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 27 05:47:52 localhost kernel: Uniform CD-ROM driver Revision: 3.20 Sep 27 05:47:52 localhost kernel: hdd: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33) Sep 27 05:47:52 localhost kernel: ide-floppy driver 0.99.newide Sep 27 05:47:52 localhost kernel: usbcore: registered new driver hiddev Sep 27 05:47:52 localhost kernel: usbcore: registered new driver usbhid Sep 27 05:47:52 localhost kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Sep 27 05:47:52 localhost kernel: mice: PS/2 mouse device common for all mice Sep 27 05:47:52 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Sep 27 05:47:52 localhost kernel: input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 Sep 27 05:47:52 localhost kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Sep 27 05:47:52 localhost kernel: NET: Registered protocol family 2 Sep 27 05:47:52 localhost kernel: IP: routing cache hash table of 2048 buckets, 64Kbytes Sep 27 05:47:52 localhost kernel: TCP: Hash tables configured (established 262144 bind 37449) Sep 27 05:47:52 localhost kernel: Initializing IPsec netlink socket Sep 27 05:47:52 localhost kernel: NET: Registered protocol family 1 Sep 27 05:47:52 localhost kernel: NET: Registered protocol family 17 Sep 27 05:47:52 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5) Sep 27 05:47:52 localhost kernel: ACPI wakeup devices: Sep 27 05:47:52 localhost kernel: HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 Sep 27 05:47:52 localhost kernel: Freeing unused kernel memory: 144k freed Sep 27 05:47:52 localhost kernel: SCSI subsystem initialized Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11 Sep 27 05:47:52 localhost kernel: ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 11 Sep 27 05:47:52 localhost kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 11 Sep 27 05:47:52 localhost kernel: ata1: no device found (phy stat 00000000) Sep 27 05:47:52 localhost kernel: scsi0 : sata_nv Sep 27 05:47:52 localhost kernel: ata2: no device found (phy stat 00000000) Sep 27 05:47:52 localhost kernel: scsi1 : sata_nv Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5 Sep 27 05:47:52 localhost kernel: ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 5 Sep 27 05:47:52 localhost kernel: ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 5 Sep 27 05:47:52 localhost kernel: ata3: no device found (phy stat 00000000) Sep 27 05:47:52 localhost kernel: scsi2 : sata_nv Sep 27 05:47:52 localhost kernel: ata4: no device found (phy stat 00000000) Sep 27 05:47:52 localhost kernel: scsi3 : sata_nv Sep 27 05:47:52 localhost kernel: EXT3-fs: INFO: recovery required on readonly filesystem. Sep 27 05:47:52 localhost kernel: EXT3-fs: write access will be enabled during recovery. Sep 27 05:47:52 localhost kernel: kjournald starting. Commit interval 5 seconds Sep 27 05:47:52 localhost kernel: EXT3-fs: hda3: orphan cleanup on readonly fs Sep 27 05:47:52 localhost kernel: EXT3-fs: hda3: 2 orphan inodes deleted Sep 27 05:47:52 localhost kernel: EXT3-fs: recovery complete. Sep 27 05:47:52 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 27 05:47:52 localhost kernel: security: 3 users, 4 roles, 280 types, 16 bools Sep 27 05:47:52 localhost kernel: security: 53 classes, 5494 rules Sep 27 05:47:52 localhost kernel: SELinux: Completing initialization. Sep 27 05:47:52 localhost kernel: SELinux: Setting up existing superblocks. Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev hda3, type ext3), uses xattr Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev mqueue, type mqueue), not configured for labeling Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev devpts, type devpts), uses transition SIDs Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev pipefs, type pipefs), uses task SIDs Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev sockfs, type sockfs), uses task SIDs Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev proc, type proc), uses genfs_contexts Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev bdev, type bdev), uses genfs_contexts Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts Sep 27 05:47:52 localhost kernel: inserting floppy driver for 2.6.9-1.667 Sep 27 05:47:52 localhost kernel: Floppy drive(s): fd0 is 1.44M Sep 27 05:47:52 localhost kernel: FDC 0 is a post-1991 82077 Sep 27 05:47:52 localhost kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29. Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 3 (level, low) -> IRQ 3 Sep 27 05:47:52 localhost kernel: eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5 Sep 27 05:47:52 localhost kernel: intel8x0_measure_ac97_clock: measured 49553 usecs Sep 27 05:47:52 localhost kernel: intel8x0: clocking to 46791 Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5 Sep 27 05:47:52 localhost kernel: ehci_hcd 0000:00:02.1: EHCI Host Controller Sep 27 05:47:52 localhost kernel: ehci_hcd 0000:00:02.1: irq 5, pci mem 42878000 Sep 27 05:47:52 localhost kernel: SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts Sep 27 05:47:52 localhost kernel: ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 Sep 27 05:47:52 localhost kernel: ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 Sep 27 05:47:52 localhost kernel: hub 1-0:1.0: USB hub found Sep 27 05:47:52 localhost kernel: hub 1-0:1.0: 10 ports detected Sep 27 05:47:52 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 Sep 27 05:47:52 localhost mDNSResponder: Starten von succeeded Sep 27 05:47:52 localhost kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller Sep 27 05:47:53 localhost kernel: ohci_hcd 0000:00:02.0: irq 11, pci mem 428b0000 Sep 27 05:47:53 localhost kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 Sep 27 05:47:53 localhost kernel: hub 2-0:1.0: USB hub found Sep 27 05:47:53 localhost kernel: hub 2-0:1.0: 10 ports detected Sep 27 05:47:53 localhost kernel: md: Autodetecting RAID arrays. Sep 27 05:47:53 localhost kernel: md: autorun ... Sep 27 05:47:53 localhost smartd[2138]: smartd version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Sep 27 05:47:53 localhost kernel: md: ... autorun DONE. Sep 27 05:47:53 localhost smartd[2138]: Home page is http://smartmontools.sourceforge.net/ Sep 27 05:47:53 localhost kernel: SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts Sep 27 05:47:53 localhost smartd[2138]: Opened configuration file /etc/smartd.conf Sep 27 05:47:53 localhost kernel: NET: Registered protocol family 10 Sep 27 05:47:53 localhost kernel: Disabled Privacy Extensions on device 02369a00(lo) Sep 27 05:47:53 localhost smartd[2138]: Configuration file /etc/smartd.conf parsed. Sep 27 05:47:53 localhost kernel: IPv6 over IPv4 tunneling driver Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hda, opened Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hda, not found in smartd database. Sep 27 05:47:53 localhost kernel: nvidia: no version for "struct_module" found: kernel tainted. Sep 27 05:47:53 localhost kernel: nvidia: module license 'NVIDIA' taints kernel. Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hda, is SMART capable. Adding to "monitor" list. Sep 27 05:47:53 localhost kernel: ACPI: PCI interrupt 0000:05:07.0[A] -> GSI 3 (level, low) -> IRQ 3 Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hdb, opened Sep 27 05:47:53 localhost kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0002) Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hdb, not found in smartd database. Sep 27 05:47:53 localhost kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hdb, ATA IDENTIFY DEVICE words 82-83 don't specify if SMART capable. Sep 27 05:47:53 localhost smartd[2138]: Device: /dev/hdb, to proceed anyway, use '-T permissive' Directive. Sep 27 05:47:53 localhost kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7667 Fri Jun 17 07:01:04 PDT 2005 Sep 27 05:47:53 localhost smartd[2138]: Unable to register ATA device /dev/hdb at line 2 of file /etc/smartd.conf Sep 27 05:47:53 localhost smartd[2138]: Unable to register device /dev/hdb (no Directive -d removable). Exiting. Sep 27 05:47:53 localhost kernel: ACPI: Power Button (FF) [PWRF] Sep 27 05:47:53 localhost smartd: Starten von smartd failed Sep 27 05:47:53 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:53 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:53 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:53 localhost acpid: Starten von acpid succeeded Sep 27 05:47:54 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:54 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:54 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:54 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:54 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:54 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:54 localhost kernel: hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:54 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:54 localhost kernel: ide: failed opcode was: unknown Sep 27 05:47:54 localhost kernel: ide0: reset: success Sep 27 05:47:54 localhost kernel: EXT3 FS on hda3, internal journal Sep 27 05:47:54 localhost kernel: device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com // ## da ich immer noch zu viele zeichen habe, geht der log beim nächstem post weiter...
27.09.05, 15:42
Bayerfans04

und das ist der zweite teil:

Code:

Sep 27 05:47:54 localhost kernel: cdrom: open failed. Sep 27 05:47:54 localhost kernel: cdrom: open failed. Sep 27 05:47:54 localhost kernel: kjournald starting. Commit interval 5 seconds Sep 27 05:47:54 localhost kernel: EXT3 FS on hda2, internal journal Sep 27 05:47:54 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 27 05:47:54 localhost kernel: SELinux: initialized (dev hda2, type ext3), uses xattr Sep 27 05:47:54 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Sep 27 05:47:54 localhost kernel: Adding 104380k swap on /dev/hda5. Priority:-1 extents:1 Sep 27 05:47:54 localhost kernel: SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts Sep 27 05:47:54 localhost kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] Sep 27 05:47:54 localhost kernel: parport0: irq 7 detected Sep 27 05:47:54 localhost kernel: SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Sep 27 05:47:54 localhost kernel: i2c /dev entries driver Sep 27 05:47:57 localhost kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] Sep 27 05:47:57 localhost kernel: parport0: irq 7 detected Sep 27 05:47:57 localhost kernel: lp0: using parport0 (polling). Sep 27 05:47:57 localhost kernel: lp0: console ready Sep 27 05:47:57 localhost cups: Starten von cupsd succeeded Sep 27 05:47:58 localhost sshd: succeeded Sep 27 05:47:58 localhost xinetd: Starten von xinetd succeeded Sep 27 05:47:58 localhost xinetd[2211]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in. Sep 27 05:47:58 localhost xinetd[2211]: Started working: 0 available services Sep 27 05:48:04 localhost sendmail: Starten von sendmail succeeded Sep 27 05:48:05 localhost sendmail: Starten von sm-client succeeded Sep 27 05:48:05 localhost gpm[2255]: *** info [startup.c(95)]: Sep 27 05:48:05 localhost gpm[2255]: Started gpm successfully. Entered daemon mode. Sep 27 05:48:05 localhost gpm[2255]: *** info [mice.c(1766)]: Sep 27 05:48:05 localhost gpm[2255]: imps2: Auto-detected intellimouse PS/2 Sep 27 05:48:05 localhost gpm: Starten von gpm succeeded Sep 27 05:48:05 localhost crond: Starten von crond succeeded Sep 27 05:48:07 localhost xfs: Starten von xfs succeeded Sep 27 05:48:07 localhost xfs[2291]: ignoring font path element /usr/X11R6/lib/X11/fonts/Speedo (unreadable) Sep 27 05:48:07 localhost anacron: Starten von anacron succeeded Sep 27 05:48:08 localhost atd: Starten von atd succeeded Sep 27 05:48:08 localhost readahead: Hintergrund-readahead starten: Sep 27 05:48:09 localhost rc: readahead starten: succeeded Sep 27 05:48:09 localhost messagebus: Starten von messagebus succeeded Sep 27 05:48:09 localhost cups-config-daemon: Starten von cups-config-daemon succeeded Sep 27 05:48:09 localhost haldaemon: Starten von haldaemon succeeded Sep 27 05:48:10 localhost wine: Registering binary handler for Windows applications Sep 27 05:48:10 localhost fstab-sync[2366]: removed all generated mount points Sep 27 05:48:10 localhost rc: wine starten: succeeded Sep 27 05:48:15 localhost fstab-sync[2945]: added mount point /media/cdrom for /dev/hdd Sep 27 05:48:16 localhost fstab-sync[2954]: added mount point /media/cdrecorder for /dev/hdc Sep 27 05:48:17 localhost gdm-autologin(pam_unix)[2878]: session opened for user frank by (uid=0) Sep 27 05:48:19 localhost fstab-sync[3076]: added mount point /media/floppy for /dev/fd0 Sep 27 05:48:56 localhost gconfd (frank-3198): (Version 2.8.1) wird gestartet, Prozesskennung 3198, Benutzer »frank« Sep 27 05:48:57 localhost gconfd (frank-3198): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 27 05:48:57 localhost gconfd (frank-3198): Die Adresse »xml:readwrite:/home/frank/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 27 05:48:57 localhost gconfd (frank-3198): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 27 06:13:21 localhost crond(pam_unix)[3264]: session opened for user root by (uid=0) Sep 27 06:25:28 localhost crond(pam_unix)[3264]: session closed for user root Sep 27 06:43:31 localhost kernel: oom-killer: gfp_mask=0x1d2 Sep 27 06:43:31 localhost kernel: DMA per-cpu: Sep 27 06:43:31 localhost kernel: cpu 0 hot: low 2, high 6, batch 1 Sep 27 06:43:31 localhost kernel: cpu 0 cold: low 0, high 2, batch 1 Sep 27 06:43:31 localhost kernel: Normal per-cpu: Sep 27 06:43:31 localhost kernel: cpu 0 hot: low 32, high 96, batch 16 Sep 27 06:43:31 localhost kernel: cpu 0 cold: low 0, high 32, batch 16 Sep 27 06:43:31 localhost kernel: HighMem per-cpu: empty Sep 27 06:43:31 localhost kernel: Sep 27 06:43:31 localhost kernel: Free pages: 1076kB (0kB HighMem) Sep 27 06:43:31 localhost kernel: Active:126442 inactive:124971 dirty:0 writeback:1 unstable:0 free:269 slab:3128 mapped:250643 pagetables:909 Sep 27 06:43:31 localhost kernel: DMA free:12kB min:12kB low:24kB high:36kB active:10804kB inactive:1976kB present:16384kB Sep 27 06:43:31 localhost kernel: protections[]: 0 0 0 Sep 27 06:43:33 localhost kernel: Normal free:1064kB min:1004kB low:2008kB high:3012kB active:494964kB inactive:497908kB present:1032128kB Sep 27 06:43:33 localhost kernel: protections[]: 0 0 0 Sep 27 06:43:34 localhost kernel: HighMem free:0kB min:128kB low:256kB high:384kB active:0kB inactive:0kB present:0kB Sep 27 06:43:35 localhost kernel: protections[]: 0 0 0 Sep 27 06:43:35 localhost kernel: DMA: 1*4kB 1*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 12kB Sep 27 06:43:36 localhost kernel: Normal: 0*4kB 1*8kB 0*16kB 1*32kB 2*64kB 1*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1064kB Sep 27 06:43:36 localhost kernel: HighMem: empty Sep 27 06:43:36 localhost kernel: Swap cache: add 30444, delete 30444, find 169/708, race 0+0 Sep 27 06:43:37 localhost kernel: Out of Memory: Killed process 2237 (foomatic-rip). Sep 27 07:01:01 localhost crond(pam_unix)[3958]: session opened for user root by (uid=0) Sep 27 07:01:01 localhost crond(pam_unix)[3958]: session closed for user root Sep 27 08:01:01 localhost crond(pam_unix)[4843]: session opened for user root by (uid=0) Sep 27 08:01:02 localhost crond(pam_unix)[4843]: session closed for user root Sep 27 09:01:01 localhost crond(pam_unix)[5611]: session opened for user root by (uid=0) Sep 27 09:01:01 localhost crond(pam_unix)[5611]: session closed for user root Sep 27 10:01:01 localhost crond(pam_unix)[6378]: session opened for user root by (uid=0) Sep 27 10:01:01 localhost crond(pam_unix)[6378]: session closed for user root Sep 27 11:01:01 localhost crond(pam_unix)[7146]: session opened for user root by (uid=0) Sep 27 11:01:01 localhost crond(pam_unix)[7146]: session closed for user root Sep 27 12:01:01 localhost crond(pam_unix)[7913]: session opened for user root by (uid=0) Sep 27 12:01:01 localhost crond(pam_unix)[7913]: session closed for user root Sep 27 13:01:01 localhost crond(pam_unix)[8681]: session opened for user root by (uid=0) Sep 27 13:01:01 localhost crond(pam_unix)[8681]: session closed for user root Sep 27 14:01:01 localhost crond(pam_unix)[9448]: session opened for user root by (uid=0) Sep 27 14:01:01 localhost crond(pam_unix)[9448]: session closed for user root Sep 27 15:01:01 localhost crond(pam_unix)[10216]: session opened for user root by (uid=0) Sep 27 15:01:01 localhost crond(pam_unix)[10216]: session closed for user root Sep 27 16:01:02 localhost crond(pam_unix)[10983]: session opened for user root by (uid=0) Sep 27 16:01:02 localhost crond(pam_unix)[10983]: session closed for user root Sep 27 16:03:19 localhost su(pam_unix)[11083]: session opened for user root by frank(uid=500) Sep 27 16:03:44 localhost su[11083]: Warning! Could not relabel with user_u:object_r:devpts_t, not relabeling. Sep 27 16:03:44 localhost su(pam_unix)[11083]: session closed for user root Sep 27 16:03:48 localhost kernel: CSLIP: code copyright 1989 Regents of the University of California Sep 27 16:03:48 localhost kernel: PPP generic driver version 2.4.2 Sep 27 16:03:49 localhost pppd[11174]: pppd 2.4.2 started by root, uid 0 Sep 27 16:03:49 localhost pppd[11174]: Using interface ppp0 Sep 27 16:03:49 localhost pppd[11174]: Connect: ppp0 <--> /dev/pts/2 Sep 27 16:03:49 localhost pppoe[11179]: PPP session is 4747 Sep 27 16:03:50 localhost pppd[11174]: CHAP authentication succeeded: CHAP authentication success, unit 180 Sep 27 16:03:50 localhost pppd[11174]: local IP address 84.59.239.98 Sep 27 16:03:50 localhost pppd[11174]: remote IP address 84.59.224.1 Sep 27 16:03:50 localhost pppd[11174]: primary DNS address 195.50.140.252 Sep 27 16:03:50 localhost pppd[11174]: secondary DNS address 145.253.2.75 Sep 27 16:03:50 localhost NET: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf Sep 27 16:04:00 localhost kernel: application firefox-bin uses obsolete OSS audio interface Sep 27 16:23:05 localhost gconfd (root-11580): (Version 2.8.1) wird gestartet, Prozesskennung 11580, Benutzer »root« Sep 27 16:23:05 localhost gconfd (root-11580): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 27 16:23:05 localhost gconfd (root-11580): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 27 16:23:05 localhost gconfd (root-11580): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
27.09.05, 15:45
winni_puh

Ich kann dir leider nicht bei deinem Problem helfen, aber sooo lange Logs packt man in ein CODE und Zitiert die nicht! ;)

winni_puh
27.09.05, 15:56
Ginsengelf

Moin, das System scheint irgendwo auf hdb schreiben zu wollen, was fehlschlägt:

Code:

Sep 27 05:47:51 localhost kernel: hdb: max request size: 1024KiB Sep 27 05:47:51 localhost kernel: hdb: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133) Sep 27 05:47:51 localhost kernel: hdb:hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error } Sep 27 05:47:51 localhost kernel: hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } Sep 27 05:47:51 localhost kernel: ide: failed opcode was: unknown

aber frag mich nicht nach einem Grund, evtl. Platte defekt?

Ginsengelf
27.09.05, 16:18
Bayerfans04

hdb ist meine zweite festplatte, die mit fat32 formatiert ist. aber die hatte er nicht erkannt, bzw. konnte nicht auf ihr lesen + schreiben. den grund weiß ich bis heut nicht, aber ich nehme an, dass es an der platte liegt. ich habe sie jetzt jedenfalls aus der fstab gestrichen, weil ich diese lästigen fehlermeldungen satt hatte und gebrauche sie jetzt nur für mein windows

edit: die beiden programme sind nicht unter den diensten aufgeführt, die bei jedem start gestartet werden, das muss also noch irgendwo anders stehen, dass die beiden zum start gestarten werden, denn im autostartordner von kde sind sie nicht...

edit2: ich glaube ich weiß wo der fehler lag, das hat mich auf die idee gebracht: http://lists.suse.com/archive/suse-l...Dec/2137.html#
da ich vorher meinen drucker installiert hatte, hatte ich versucht etwas zu drucken und das ging nicht. ich weiß aber nicht mehr, wann das genau war. vielleicht war es genau die sitzung davor, als das anfing. und jetzt will der bei jedem start das ausführen / drucken und es geht nicht, weil er zum einen mit meinem drucker nicht klar kommt (lexmark Z515) und zum anderen weil mein drucker nicht eingeschaltet habe. ich werde mal versuchen, dass in ordnug zu bringen und dann zu resetten. danach werde ich euch bescheid sagen, ob es geklappt hat oder nicht...
27.09.05, 16:53
Bayerfans04

kaum zu glauben, es klappt!!!
tut mir leid, dass ich euch mit meinem müll zugelabert habe, thread kann somit geschlossen werden!

:) :) :) :) :)