Archiv verlassen und diese Seite im Standarddesign anzeigen : touchpad und usb mouse gleichzeitig?
Hallo!
Früher hatte ich das mal, aber ich weis nicht mehr wie das ging. Zur Zeit kann ich nur entweder oder.
Merkwürdigerweise sieht die Conf ob USB oder Touchpad gleich aus.
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "ButtonNumber" "2"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "on"
Option "Name" "Autodetection"
Option "Protocol" "PS/2"
Option "Vendor" "Sysp"
EndSection
Hi,
wie ich deiner Signatur entnehmen kann, läuft bei dir eine SuSE. Da geht das eigentlich von alleine (war bei mir jedenfalls immer so). Ansonsten brauchst du eben zwei Einträge in der XF86Conf - für jede Maus einen:
Section "InputDevice"
# USB-Mouse
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# Touchpad
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "yes"
EndSection
Section "ServerLayout"
...
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Mouse2" "CorePointer"
...
Protokoll und Device musste natürlich deinen Gegebenheiten anpassen.
Hoffe es hilft,
..danke, es geht jetzt quasi schon, nur das Rad funzt noch nicht.
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "ButtonNumber" "2"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "on"
Option "Name" "Autodetection"
Option "Protocol" "PS/2"
Option "Vendor" "Sysp"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[3]"
Option "Device" "/dev/input/mice"
Option "InputFashion" "Mouse"
Option "Name" "USB-Mouse;PS/2"
Option "Protocol" "PS/2"
EndSection
Hi,
Option "ZAxisMapping" "4 5"
macht das Rad funktionierend. EInfach bei der Maus mit Rad mit in Input-Decice-Sektion eintragen.
des Rad geht immer noch nicht ...
Original geschrieben von Sonny
..danke, es geht jetzt quasi schon, nur das Rad funzt noch nicht.
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "ButtonNumber" "2"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "on"
Option "Name" "Autodetection"
Option "Protocol" "PS/2"
Option "Vendor" "Sysp"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[3]"
Option "Device" "/dev/input/mice"
Option "InputFashion" "Mouse"
Option "Name" "USB-Mouse;PS/2"
Option "Protocol" "PS/2"
EndSection
PS/2 und Scroll-funktion gibt Probleme!
Insoweit bei dieser section IMPS/2 anstatt PS/2.
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[3]"
Option "Device" "/dev/input/mice"
Option "InputFashion" "Mouse"
Option "Name" "USB-Mouse;PS/2"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.