Wondershaper_Config...

[AceTheFace]

Hi,

habe hier ein kleines Netzwerk mit einem Linux-Router, einem Linux-Rechner und zwei Windows-Rechnern. Auf dem Router läuft der mldonkey und ein ftp-server.
Nun ist es so, dass der mldonkey mit seinen 10K up, natürlich ein vernünftiges benutzen des ftp-servers verhindert, da hier ja max. 6K (theoretisch) übrig bleiben würden. Ich hätte also gerne, dass FTP-Anfragen genauso wie das surfen auf den drei clients höhere priorität hat als der mldonkey.
Das Gesuchte ist wohl der Wondershaper, allerdings tut er nicht wirklich das was er soll nachdem ich ihn gestartet hab'. Hier mal meine Config:

#!/bin/bash

# Wonder Shaper
# please read the README before filling out these values
#
# Set the following values to somewhat less than your actual download
# and uplink speed. In kilobits. Also set the device that is to be shaped.
DOWNLINK=700
UPLINK=100
DEV=ppp0

# low priority OUTGOING traffic - you can leave this blank if you want
# low priority source netmasks
NOPRIOHOSTSRC=

# low priority destination netmasks
NOPRIOHOSTDST=

# low priority source ports
NOPRIOPORTSRC=4662

# low priority destination ports
NOPRIOPORTDST=4662

# Now remove the following two lines :-)


################################################## #######

if [ "$1" = "status" ]
then
tc -s qdisc ls dev $DEV
tc -s class ls dev $DEV
exit
fi


# clean existing down- and uplink qdiscs, hide errors
tc qdisc del dev $DEV root 2> /dev/null > /dev/null
tc qdisc del dev $DEV ingress 2> /dev/null > /dev/null

if [ "$1" = "stop" ]
then
exit
fi

###### uplink

# install root CBQ

tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 10mbit

# shape everything at $UPLINK speed - this prevents huge queues in your
# DSL modem which destroy latency:
# main class

tc class add dev $DEV parent 1: classid 1:1 cbq rate ${UPLINK}kbit \
allot 1500 prio 5 bounded isolated

# high prio class 1:10:

tc class add dev $DEV parent 1:1 classid 1:10 cbq rate ${UPLINK}kbit \
allot 1600 prio 1 avpkt 1000

# bulk and default class 1:20 - gets slightly less traffic,
# and a lower priority:

tc class add dev $DEV parent 1:1 classid 1:20 cbq rate $[9*$UPLINK/10]kbit \
allot 1600 prio 2 avpkt 1000

# 'traffic we hate'

tc class add dev $DEV parent 1:1 classid 1:30 cbq rate $[8*$UPLINK/10]kbit \
allot 1600 prio 2 avpkt 1000

# all get Stochastic Fairness:
tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10
tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10
tc qdisc add dev $DEV parent 1:30 handle 30: sfq perturb 10

# start filters
# TOS Minimum Delay (ssh, NOT scp) in 1:10:
tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \
match ip tos 0x10 0xff flowid 1:10

# ICMP (ip protocol 1) in the interactive class 1:10 so we
# can do measurements & impress our friends:
tc filter add dev $DEV parent 1:0 protocol ip prio 11 u32 \
match ip protocol 1 0xff flowid 1:10

# prioritize small packets (<64 bytes)

tc filter add dev $DEV parent 1: protocol ip prio 12 u32 \
match ip protocol 6 0xff \
match u8 0x05 0x0f at 0 \
match u16 0x0000 0xffc0 at 2 \
flowid 1:10


# some traffic however suffers a worse fate
for a in $NOPRIOPORTDST
do
tc filter add dev $DEV parent 1: protocol ip prio 14 u32 \
match ip dport $a 0xffff flowid 1:30
done

for a in $NOPRIOPORTSRC
do
tc filter add dev $DEV parent 1: protocol ip prio 15 u32 \
match ip sport $a 0xffff flowid 1:30
done

for a in $NOPRIOHOSTSRC
do
tc filter add dev $DEV parent 1: protocol ip prio 16 u32 \
match ip src $a flowid 1:30
done

for a in $NOPRIOHOSTDST
do
tc filter add dev $DEV parent 1: protocol ip prio 17 u32 \
match ip dst $a flowid 1:30
done

# rest is 'non-interactive' ie 'bulk' and ends up in 1:20

tc filter add dev $DEV parent 1: protocol ip prio 18 u32 \
match ip dst 0.0.0.0/0 flowid 1:20


########## downlink #############
# slow downloads down to somewhat less than the real speed to prevent
# queuing at our ISP. Tune to see how high you can set it.
# ISPs tend to have *huge* queues to make sure big downloads are fast
#
# attach ingress policer:

tc qdisc add dev $DEV handle ffff: ingress

# filter *everything* to it (0.0.0.0/0), drop everything that's
# coming in too fast:

tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \
0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1


Das Interface ppp0 müsste doch passen oder ist das eth0?
Skript mit ./wshaper starten müsste doch reichen, oder? Aber wie beende ich das ganze wieder?
Es gibt keinen Prozess dazu?

Danke,

Gruß,

Ace