PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Bekomme beim Start von samba diese Fehlermeldung



lenard
02.07.03, 19:15
Hallo Zusammen.
Jedesmal wenn ich versuche Samba zu starten bekomme ich eine Fehlermeldung.

Das System versucht vorher Networks zu starten und gibt folgendes aus.

/etc/init.d/network start gab 0 (Erfolg) zurück:
Setting up network interfaces:
lo ..done
eth0 IP/Netmask: 192.168.22.1 / 255.255.255.0 /etc/sysconfig/network/scripts/ifup-route: line 154: route-stack-number: No such file or directory
..done
eth1 IP/Netmask: 192.168.11.1 / 255.255.255.0 ..done
dsl0 ..failed
ppp0 manual
ERROR: Error while excuting:
Command 'ip route replace to 192.168.0.0/16 via 212.185.252.73' returned:
RTNETLINK answers: Network is unreachable
Configuration line: 192.168.0.0 212.185.252.73 255.255.0.0


Wer kann helfen.

Gruss
Lenard

quinte17
04.07.03, 07:50
ich glaube dass hier hat weniger mit samba zu tun... eher mit deiner netzwerkconfig... schau mal bei ifconfig, ob auch alle netzwerkkarten up sind..

mfg

Thomas Mitzkat
04.07.03, 07:52
du willst auf ein netzwerk routen, dass gar nicht vorhanden ist.

lenard
04.07.03, 17:38
Hallo.
Das kam mit ifconfig raus. Leider kann ich damit gar ncihts anfangen.


eth0 Protokoll:Ethernet Hardware Adresse 00:E0:7D:D4:11:39
inet Adresse:192.168.22.1 Bcast:192.168.22.255 Maske:255.255.255.0
inet6 Adresse: fe80::2e0:7dff:fed4:1139/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:100
RX bytes:0 (0.0 b) TX bytes:460 (460.0 b)
Interrupt:3 Basisadresse:0xc700

eth1 Protokoll:Ethernet Hardware Adresse 00:E0:18:AA:71:2C
inet Adresse:192.168.11.1 Bcast:192.168.11.255 Maske:255.255.255.0
inet6 Adresse: fe80::2e0:18ff:feaa:712c/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19467 errors:0 dropped:0 overruns:0 frame:0
TX packets:17638 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:100
RX bytes:12187034 (11.6 Mb) TX bytes:7786477 (7.4 Mb)
Interrupt:11 Basisadresse:0xd800

lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:318 errors:0 dropped:0 overruns:0 frame:0
TX packets:318 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:20460 (19.9 Kb) TX bytes:20460 (19.9 Kb)

ppp0 Protokoll:Punkt-zu-Punkt Verbindung
inet Adresse:217.226.115.21 P-z-P:217.5.98.90 Maske:255.255.255.255
UP PUNKTZUPUNKT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:18753 errors:0 dropped:0 overruns:0 frame:0
TX packets:16919 errors:0 dropped:5 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:3
RX bytes:11728766 (11.1 Mb) TX bytes:7392300 (7.0 Mb)


Ich kann alle Rechner die an den Netzwerkkarten hängen anpingen und alle könne auch in Internet.

lenard
04.07.03, 17:45
Hi.

Ich poste nochmal einen Auszug aus der boot.msg


startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
<notice>'/etc/init.d/rc5.d/S01atd start' exits with status 0
<notice>/etc/init.d/rc5.d/S01fbset start
<notice>'/etc/init.d/rc5.d/S01fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S01isdn start
<notice>Initializing random number generator
done

'/etc/init.d/rc5.d/S01isdn start' exits with status 0
<notice>/etc/init.d/rc5.d/S01random start
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S01rpmconfigcheck start
<notice>'/etc/init.d/rc5.d/S01rpmconfigcheck start' exits with status 0
<notice>/etc/init.d/rc5.d/S02splash start
<notice>'/etc/init.d/rc5.d/S02splash start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
Setting up network interfaces:

lo
done

eth0 IP/Netmask: 192.168.22.1 / 255.255.255.0
done

eth1 IP/Netmask: 192.168.11.1 / 255.255.255.0
done

dsl0
manual

ppp0
manual

ERROR: Error while excuting:

Command 'ip route replace to 212.185.252.73/32 via 217.5.98.90' returned:

RTNETLINK answers: Network is unreachable

Configuration line: 212.185.252.73 217.5.98.90 255.255.255.255

ERROR: Error while excuting:

Command 'ip route replace to 192.168.0.0/16 via 212.185.252.73' returned:

RTNETLINK answers: Network is unreachable

Configuration line: 192.168.0.0 212.185.252.73 255.255.0.0

<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>
done

startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/sbin/klogd ]
<notice>'/etc/init.d/rc5.d/S06syslog start' exits with status 0
<notice>/etc/init.d/rc5.d/S07hotplug start
Starting hotplugging services [ ieee1394 net pci usb .. ]
done

Starting resource manager<notice>'/etc/init.d/rc5.d/S07hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S08resmgr start
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=43 _=/sbin/startproc DAEMON=/sbin/resmgrd ]

done



Vielleicht hilft das Euch ja weiter.

lenard
04.07.03, 17:55
Hi nochmal.

Poste gleich noch die Kernel Route:

Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
217.5.98.90 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.22.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.11.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 217.5.98.90 0.0.0.0 UG 0 0 0 ppp0



und meine etc/sysconfig/network/routes

127.0.0.0 0.0.0.0 255.0.0.0 lo
192.168.22.0 0.0.0.0 255.255.255.0 eth0
192.168.11.0 0.0.0.0 255.255.255.0 eth1
212.185.252.73 217.5.98.90 255.255.255.255
192.168.0.0 212.185.252.73 255.255.0.0
default 192.168.22.1 - -

Ich hoffe es kann mir jemand weiterhelfen, bin schon am verzweifeln, weil ich meine Daten vom Schlepptop nicht mehr runterladen kann.

Vielen Dank schon mal im Vorraus.
Lenard

lenard
05.07.03, 13:18
Hallo.
Kann mir wirklich keiner weiterhelfen?

Gruss
Lenard

lenard
05.07.03, 16:11
Hallo.

Ich hab das Problem alleine gelöst.
Als erstes war die /etc/sysconfig/networks/routes föllig für den Hintern.

So ist sie jetzt und funzt auch.

192.168.22.0 0.0.0.0 255.255.255.0 eth0
192.168.11.0 0.0.0.0 255.255.255.0 eth1
0.0.0.0 192.168.11.1 0.0.0.0 eth1

Nicht vergessen das in der resolv.conf die Nameserver drin stehen müssen.

nameserver 212.185.252.73
nameserver 194.25.2.129

Das sind bei mir alle Einträge in der /etc/resolv.conf (Sind die T-Online Nameserver).

Samba konnte ich dann zwar immer noch nicht starten, aber das Problem war einfach das ich wohl ausversehen etwas hineinkopiert habe was da nicht hingehört hat.


Gruss
Schorsch

Thomas Mitzkat
05.07.03, 16:32
das hast du schon mal fein gemacht :D

aber was ist denn jetzt mit samba? was ist das problem?