PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Brauch mal hilfe mit wine newbie



000Hunter000
07.06.03, 06:11
Allso ich hab mandrake 9.1 und mit diesen rpm pakete verwalter wine auf meinen pc installiert. So immer wenn ich nun eine *.exe ausführen will kommt folgendes: (hier beispiel moorhun) [hunter@localhost Documents]$ wine mh.exe
fixme:reg:_nt_dump_lf unknown Win XP node id 0x686c: do we need to add support for it ?
fixme:reg:_nt_dump_lf unknown Win XP node id 0x686c: do we need to add support for it ?
fixme:reg:_nt_dump_lf unknown Win XP node id 0x686c: do we need to add support for it ?
wine: Unhandled exception, starting debugger...
err:win:GetDesktopWindow Wine init error: either you're trying to use an invalid native USER.EXE config, or some graphics/GUI libraries or DLLs didn't initialize properly. Aborting.
[hunter@localhost Documents]$

Die fehlermeldung kommt bei jeder *.exe die cih ausgeführt habe

Phoenix33
07.06.03, 07:26
poste mal deine wine config .. falls da
[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,wi n30,win31)" },
;"Windows" = "win98"
; DOS version to imitate
;"DOS" = "6.22"
genau so drinnen steht dann sollte es gehen wenn net änder die betreffenden passagen

000Hunter000
07.06.03, 07:49
Allso bei mir steht das in der config file:
WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config

;; If you think it is necessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
;; If wine was built with autofs patch, you can add a line
;; "Automount" = "1"
;; to sections with autofs_ed drives
;;
[Drive A]
"Path" = "/mnt/floppy"
"Type" = "floppy"
"Label" = "Floppy"
"Filesystem" = "win95"
"Device" = "/dev/fd0"

[Drive C]
"Path" = "/mnt/windows"
"Type" = "hd"
"Label" = "Windows"
"Filesystem" = "win95"

[Drive D]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "CD-Rom"
"Filesystem" = "win95"
; make sure that device is correct and has proper permissions !
"Device" = "/dev/cdrom"

[Drive E]
"Path" = "/tmp/winetmp-${USER}"
"Type" = "hd"
"Label" = "Tmp Drive"
"Filesystem" = "win95"

[Drive F]
"Path" = "${HOME}"
"Type" = "network"
"Label" = "Home"
"Filesystem" = "win95"

[wine]
"Windows" = "c:\\windows"
"System" = "c:\\windows\\system"
"Temp" = "e:\\"
"Path" = "c:\\windows;c:\\windows\\system;e:\\;e:\\test;f:\\"
"Profile" = "c:\\windows\\Profiles\\Administrator"
"GraphicsDriver" = "x11drv"
;"ShowDirSymlinks" = "1"
;"ShowDotFiles" = "1"
"ShellLinker" = "wineshelllink"

# <wineconf>

[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,wi n30,win31)
"Windows" = "win98"
; DOS version to imitate
;"DOS" = "6.22"

; Be careful here, wrong DllOverrides settings have the potential
; to pretty much kill your setup.
[DllOverrides]
; some dlls you may want to change
"oleaut32" = "builtin, native"
"ole32" = "builtin, native"
"commdlg" = "builtin, native"
"comdlg32" = "builtin, native"
"shell" = "builtin, native"
"shell32" = "builtin, native"
"shfolder" = "builtin, native"
"shlwapi" = "builtin, native"
"shdocvw" = "builtin, native"
"advapi32" = "builtin, native"
"msvcrt" = "native, builtin"
"mciavi.drv" = "native, builtin"
"mcianim.drv" = "native, builtin"
; you can specify applications too
; this one will apply for all notepad.exe
;"*notepad.exe" = "native, builtin"
; this one will apply only for a particular file
;"C:\\windows\\regedit.exe" = "native, builtin"
; default for all other dlls
"*" = "builtin, native"

[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 800x600 for Wine
;"Desktop" = "800x600"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "Y"
; Use XShm extension if present
"UseXShm" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Use the take focus protocol
"UseTakeFocus" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "N"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "N"
; Code page used for captions in managed mode
; 0 means default ANSI code page (CP_ACP == 0)
"TextCP" = "0"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Run in synchronous mode (useful for debugging X11 problems)
;;"Synchronous" = "Y"
;
; Use the Render extension to render client side fonts (default "Y")
;;"ClientSideWithRender" = "Y"
; Fallback on X core requests to render client side fonts (default "Y")
;;"ClientSideWithCore" = "Y"
; Set both of the previous two to "N" in order to force X11 server side fonts
;
; Anti-alias fonts if using the Render extension (default "Y")
;;"ClientSideAntiAliasWithRender" = "Y"
; Anti-alias fonts if using core requests fallback (default "Y")
;;"ClientSideAntiAliasWithCore" = "Y"
;

[fonts]
;Read the Fonts topic in the Wine User Guide before adding aliases
;See a couple of examples for russian users below
"Resolution" = "96"
"Default" = "-adobe-helvetica-"
"DefaultFixed" = "fixed"
"DefaultSerif" = "-adobe-times-"
"DefaultSansSerif" = "-adobe-helvetica-"

;; default TrueType fonts with russian koi8-r encoding
;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;; default cyrillic bitmap X fonts
;"Default" = "-cronyx-helvetica-"
;"DefaultFixed" = "fixed"
;"DefaultSerif" = "-cronyx-times-"
;"DefaultSansSerif" = "-cronyx-helvetica-"

; the TrueType font dirs you want to make accessible to wine
[FontDirs]
;; standard ttf font dir
"dir1" = "/usr/X11R6/lib/X11/fonts/TTF"
;; this should be on most boxes
"dir2" = "/usr/share/fonts/ttf/western"
;; drakfont dir
;"dir3" = "/usr/X11R6/lib/X11/fonts/drakfont/ttf"
;; ms webfonts
;"dir4" = "/usr/X11R6/lib/X11/fonts/msttcorefonts"

[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"

[parallelports]
"Lpt1" = "/dev/lp0"

[ppdev]
;; key: io-base of the emulated port
;; value : parport-device{,timeout}
;; timeout for auto closing an open device ( not yet implemented)
"378" = "/dev/parport0"
;"278" = "/dev/parport1"
;"3bc" = "/dev/parport2"

[spooler]
"FILE:" = "tmp.ps"
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile="/tmp/winetmp-${USER} -q -"
"LPT3:" = "/dev/lp3"

[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
;"write" = "0x779,0x379,0x280-0x2a0"

[Debug]
;"RelayExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"RelayInclude" = "user32.CreateWindowA"
;"SnoopExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"SpyExclude" = "WM_SIZE;WM_TIMER;"

[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Where to find the global registries
;"GlobalRegistryDir" = "/etc/wine";
; Global registries (stored in /etc/wine)
"LoadGlobalRegistryFiles" = "Y"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "Y"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"

[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
;; this has *nothing* to do with the windows version Wine returns:
;; set the "Windows" value in the [Version] section if you want that.
"WineLook" = "Win98"

[Console]
"Drivers" = "tty"
"XtermProg" = "nxterm"
"InitialRows" = "25"
"InitialColumns" = "80"
"TerminalType" = "nxterm"

[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"

; List of all directories directly contain .AFM files
[afmdirs]
"1" = "/usr/share/ghostscript/fonts"
"2" = "/usr/share/a2ps/afm"
"3" = "/usr/share/enscript"
"4" = "/usr/X11R6/lib/X11/fonts/Type1"

[WinMM]
"Drivers" = "winearts.drv"
;"Drivers" = "winejack.drv"
;"Drivers" = "wineoss.drv"
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"

[dsound]
;; HEL only: Number of waveOut fragments ahead to mix in new buffers.
;"HELmargin" = "5"
;; HEL only: Number of waveOut fragments ahead to queue to driver.
;"HELqueue" = "5"
;; Max number of fragments to prebuffer
;"SndQueueMax" = "28"
;; Min number of fragments to prebuffer
;"SndQueueMin" = "12"

[Network]
;; Use the DNS (Unix) host name always as NetBIOS "ComputerName" (boolean, default "Y").
;; Set to N if you need a persistent NetBIOS ComputerName that possibly differs
;; from the Unix host name. You'll need to set ComputerName in
;; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\ComputerName\ComputerName, too.
;"UseDnsComputerName" = "N"

;; sample AppDefaults entries
[AppDefaults\\iexplore.exe\\DllOverrides]
"shlwapi" = "native"
"rpcrt4" = "native"
"ole32" = "native"
"shdocvw" = "native"
"wininet" = "native"
"shfolder" = "native"
"shell32" = "native"
"shell" = "native"
"comctl32" = "native"
;
[AppDefaults\\setup.exe\\x11drv]
"Desktop" = "800x600"
;
;[AppDefaults\\sol.exe\\Version]
;"Windows" = "nt40"
;
;; Some games (Quake 2, UT) refuse to accept emulated dsound devices.
;; You can add an AppDefault entry like this for such cases.
;[AppDefaults\\pickygame.exe\\dsound]
;"EmulDriver" = "N"

# </wineconf>


allso das bei [Version] is genau so wie du oben geschrieben hast

Phoenix33
07.06.03, 08:22
hast du denn schon mal eines oder mehere programme gestartet die dann gelaufen sind ? weil so wie des aussieht is des ein problem der registry .. falls dem so ist löschen von wine und dem /home/deinuser/.wine/ verzeichnisses und neuinstalliern ;=)

000Hunter000
07.06.03, 09:28
Original geschrieben von Phoenix33
hast du denn schon mal eines oder mehere programme gestartet die dann gelaufen sind ? weil so wie des aussieht is des ein problem der registry .. falls dem so ist löschen von wine und dem /home/deinuser/.wine/ verzeichnisses und neuinstalliern ;=)

geht immer noch net :(

ich konnte noch kein programm mit wine starten es kommt immer der selbe feheler egal bei welcher exe

Phoenix33
07.06.03, 11:31
hmm probier mal wine selber zu compilieren .. www.winehq.org is glaub ich die hp
bzw. wennst net weisst wie des geht sonder sonst was adde (falls du icq hat) mich im icq dann können wir des schneller und leichter besprechen ;=)

stefan.becker
07.06.03, 11:55
Bevor du mit der Axt Hand anlegst: Hast du WINE schon konfiguriert? Installation alleine reicht nicht.

Geh mal in den obersten Howto Bereich und such dir das WINE Howto, da steht es geschrieben.

000Hunter000
07.06.03, 13:32
allso ich habe wine jetzt konfiguriert. Die setupdatei die ich runtergeladen habe konnte wine irgendwie net ölfnnen deshalb hab ich das game mit windows installiert und einfach die datein in meine home verzeichnis kopiert. Nun gibt mir aber eine beim ausführen von moorhuhn folgenden fhler aus:
fixme:palette:SetSystemPaletteUse (0x86c,0002): stub
fixme:palette:SetSystemPaletteUse (0x86c,0001): stub
fixme:system:SystemParametersInfoA Unimplemented action: 79 (SPI_GETLOWPOWERTIMEOUT)
err:seh:EXC_DefaultHandling Unhandled exception code c0000005 flags 0 addr 0x400da5d0
[hunter@localhost Moorhuhnjagd]$

ich hab dieses grafische konfigurationstool genommen winesetuptk hies das

P.S. @Phoenix33

schick mir deine icq nummer per P.N. plz :)



So jetzt gehts doch ich hab beim konfigurationstool einfach bei window mode desktop gemacht jetzt läuft moorhun zwar im fentser aber es läuft :) Gibts ne mölglichkeit das im Vollbildmodus zu machen?

P.S. Das sind die fehlermedungen die wine dabei ausgibt:
fixme:palette:SetSystemPaletteUse (0x86c,0002): stub
fixme:palette:SetSystemPaletteUse (0x86c,0001): stub
fixme:system:SystemParametersInfoA Unimplemented action: 79 (SPI_GETLOWPOWERTIMEOUT)
fixme:winsock:WS_bind Setting WS_SO_REUSEADDR on socket before we binding it
fixme:dsound:IDirectSoundImpl_SetCooperativeLevel (0x404460d8,00010021,2):stub
fixme:ddraw:Main_DirectDraw_SetCooperativeLevel (0x41ed2870)->(00010023,00000013)
fixme:x11drv:X11DRV_DDHAL_CreatePalette stub
fixme:dsound:IDirectSoundImpl_SetCooperativeLevel (0x4044bd50,00010023,2):stub
fixme:ddraw:DIB_DirectDrawSurface_Blt dwFlags DDBLT_WAIT and/or DDBLT_ASYNC: can't handle right now.
fixme:ddraw:Main_DirectDraw_SetCooperativeLevel (0x41ed2870)->(00010023,00000008)

tonmeister440
07.06.03, 15:55
hi,

ich bin mir nicht ganz sicher, aber diese fehlermeldung
err:seh:EXC_DefaultHandling Unhandled exception code c0000005 flags 0 addr 0x400da5d0
kam bei mir immer weil ich den NVIDIA-treiber nicht installiert hatte.

gruss toinmeister440

000Hunter000
07.06.03, 16:49
Original geschrieben von tonmeister440
hi,

ich bin mir nicht ganz sicher, aber diese fehlermeldung
err:seh:EXC_DefaultHandling Unhandled exception code c0000005 flags 0 addr 0x400da5d0
kam bei mir immer weil ich den NVIDIA-treiber nicht installiert hatte.

gruss toinmeister440

hmm und ich hab den ATI driver nicht installiert *g nunja weis hier jemand ein gutes HowTo für den ATI driver soll ja net so ganz einfach sein

ach sagts halt dann das man die auflölsung ändern mus :rolleyes: :D

tonmeister440
08.06.03, 16:57
hi,

ich hab hier irgendwo im forum gelesen das die linux-treiber für firegl für ati karten geeignet wären, musst du einfach mal nach ati grafikkarte im hardwareforum suchen

hier ich hab den thread gefunden
klick hier (http://www.linuxforen.de/forums/showthread.php?s=&threadid=76868&highlight=ati+firegl)

gruss tonmeister440