PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Suse 8.x - kein Sound



Daxim
26.04.03, 01:09
Ahoi.

Ganz so wie Swift-Kill (http://www.linuxforen.de/forums/showthread.php?threadid=77014), bekomme ich keinen Sound in Suse 8.1 oder 8.2, ich habe allerdings eine Fortemedia FM801. Dieselbe Soundkarte funktionierte gut in Suse 7.1 und 7.3 sowie in Mandrake 9 und natürlich im parallel installierten Windows 98.

Das äußert sich so: in XMMS kann ich die Visualisierung hüpfen sehen. aplay lässt genau die richtige Menge Zeit verstreichen, bevor ich den Prompt zurückbekomme. Es scheint alles in Ordnung zu sein, ich höre eben nur nichts.

Yast2 sagt Kartenmodell "Xwave QS3000A [FM801] Läuft...", und bei Optionen "Es gibt keine Optionen für dieses Modul". Ich habe im Yast2-Mixer, mit kmix, gamix und alsamixer alle Regler schon aufgedreht, das hat aber keinen Einfluss.

Dann habe ich in Yast2 die Soundkarte gelöscht und das Modell aus der Hardwareliste manuell gewählt. Es wurde wieder das Modul mit der exakt gleichen Benamsung (s.o.) installiert.


> /sbin/lsmod
Module Size Used by Tainted: P
snd-seq-oss 25760 0 (autoclean) (unused)
snd-seq-midi 4448 0 (autoclean) (unused)
snd-seq-midi-event 2984 0 (autoclean) [snd-seq-oss snd-seq-midi]
snd-opl3-synth 10024 0 (autoclean) (unused)
snd-seq-instr 4640 0 (autoclean) [snd-opl3-synth]
snd-seq-midi-emul 4736 0 (autoclean) [snd-opl3-synth]
snd-ainstr-fm 1124 0 (autoclean) [snd-opl3-synth]
snd-seq 39184 2 (autoclean) [snd-seq-oss snd-seq-midi
snd-seq-midi-event snd-opl3-synth snd-seq-instr snd-seq-midi-emul]
snd-pcm-oss 45888 1 (autoclean)
snd-mixer-oss 13560 1 (autoclean) [snd-pcm-oss]
snd-fm801 8580 2
snd-pcm 62912 0 [snd-pcm-oss snd-fm801]
snd-opl3-lib 6500 0 [snd-opl3-synth snd-fm801]
snd-hwdep 4896 0 [snd-opl3-lib]
snd-timer 11904 0 [snd-seq snd-pcm snd-opl3-lib]
snd-mpu401-uart 3360 0 [snd-fm801]
snd-rawmidi 13824 0 [snd-seq-midi snd-mpu401-uart]
snd-seq-device 4000 0 [snd-seq-oss snd-seq-midi
snd-opl3-synth snd-seq snd-opl3-lib snd-rawmidi]
snd-ac97-codec 31152 0 [snd-fm801]
snd 35940 0 [snd-seq-oss snd-seq-midi
snd-seq-midi-event snd-opl3-synth snd-seq-instr snd-seq-midi-emul
snd-seq snd-pcm-oss snd-mixer-oss snd-fm801 snd-pcm
snd-opl3-lib snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi
snd-seq-device snd-ac97-codec]
videodev 5600 0 (autoclean)
agpgart 35520 3 (autoclean)
nvidia 1547456 10 (autoclean)
isa-pnp 29672 0 (unused)
ipv6 134388 -1 (autoclean)
soundcore 3396 0 [snd]
st 27956 0 (autoclean) (unused)
sr_mod 12600 0 (autoclean)
sg 25852 0 (autoclean)
mousedev 4148 0 (unused)
evdev 4032 0 (unused)
input 3104 0 [mousedev evdev]
usb-uhci 22096 0 (unused)
usbcore 57836 1 [usb-uhci]
raw1394 14516 0 (unused)
ieee1394 32880 0 [raw1394]
8139too 14696 1
mii 2304 0 [8139too]
ide-scsi 9296 0
ide-cd 29404 0
cdrom 28192 0 [sr_mod ide-cd]
nls_iso8859-1 2812 1 (autoclean)
nls_cp437 4316 1 (autoclean)
vfat 9548 1 (autoclean)
fat 29752 0 (autoclean) [vfat]
reiserfs 200532 1
> tail -37 /etc/modules.conf

# required for DRI support on SiS chips
options sisfb mem=12288 mode=none

################################################## ######################
# AGP
################################################## ######################

pre-install mga /sbin/modprobe "-k" "agpgart"
pre-install r128 /sbin/modprobe "-k" "agpgart"
pre-install radeon /sbin/modprobe "-k" "agpgart"
options agpgart agp_try_unsupported=1

options snd-fm801 snd_enable=1 snd_index=0
options snd snd_cards_limit=1 snd_major=116





# YaST2: sound system dependent part
#
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-slot-1 off
alias sound-service-1-0 off
alias sound-slot-2 off
alias sound-service-2-0 off
alias sound-slot-3 off
alias sound-service-3-0 off
# gZD2.lR+QwRjaQU8:Xwave QS3000A [FM801]
alias snd-card-0 snd-fm801
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-11 snd-mixer-oss
alias sound-service-0-12 snd-pcm-ossSchlagt mal vor, was man da machen kann.