Azrael in Hell
25.02.03, 18:59
Hi
Habe soeben Proftpd installiert und konfiguriert !
Jedoch wenn man was uploaden will schreibt er nur ne 0 Byte Datei , gibt aber keine Fehlermeldung aus!
Hier meine Conf Datei
# This is the ProFTPD configuration file
# $Id: proftpd.conf,v 1.4 2002/12/13 10:33:25 dude Exp $
ServerName "Hell 666"
ServerIdent on "Hell 666"
ServerAdmin
ServerType standalone
#ServerType inetd
DefaultServer on
AccessGrantMsg "User %u logged in."
#DisplayConnect /etc/ftpissue
#DisplayLogin /etc/ftpmotd
#DisplayGoAway /etc/ftpgoaway
DeferWelcome off
# Use this to excude users from the chroot
DefaultRoot ~ !adm
# Use pam to authenticate by default
AuthPAMAuthoritative on
# Do not perform ident nor DNS lookups (hangs when the port is filtered)
IdentLookups off
UseReverseDNS off
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
# Default to show dot files in directory listings
LsDefaultOptions "-a"
# See Configuration.html for these (here are the default values)
#MultilineRFC2228 off
#RootLogin off
#LoginPasswordPrompt on
#MaxLoginAttempts 3
#MaxClientsPerHost none
#AllowForeignAddress off # For FXP
# Allow to resume not only the downloads but the uploads too
AllowRetrieveRestart on
AllowStoreRestart on
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 20
# Set the user and group that the server normally runs at.
User nobody
Group nobody
# This is where we want to put the pid file
ScoreboardFile /var/run/proftpd.score
# Normally, we want users to do a few things.
<Global>
AllowOverwrite yes
<Limit ALL SITE_CHMOD>
AllowAll
</Limit>
</Global>
# Define the log formats
LogFormat default "%h %l %u %t \"%r\" %s %b"
LogFormat auth "%v [%P] %h %t \"%r\" %s"
# A basic anonymous configuration, no upload directories.
<Anonymous ~ftp>
# Uncomment the following line to allow anonymous access
#RequireValidShell off
User ftp
Group ftp
AccessGrantMsg "Anonymous login ok, restrictions apply."
# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias anonymous ftp
# Limit the maximum number of anonymous logins
MaxClients 3 "Sorry, max %m users -- try again later"
# Put the user into /pub right after login
DefaultChdir /
# We want 'welcome.msg' displayed at login, '.message' displayed in
# each newly chdired directory and tell users to read README* files.
DisplayLogin /welcome.msg
DisplayFirstChdir .message
DisplayReadme README*
# Some more cosmetic and not vital stuff
DirFakeUser on ftpadm
DirFakeGroup on ftpadm
# Limit WRITE everywhere in the anonymous chroot
<Limit WRITE SITE_CHMOD>
AllowAll
</Limit>
<Directory uploads/*>
<Limit RMD DELE RTFR RNTO> # Verzeichnisse erstellen, loeschen, Dateien loeschen, Umbennen
DenyAll # wird verboten
</Limit>
<Limit WRITE READ STOR RETR CWD MKD> # Lesen, Schreiben, Verzeichnis wechseln
AllowAll # erlauben
</Limit>
</Directory>
# Don't write anonymous accesses to the system wtmp file (good idea!)
WtmpLog off
# Loggin for the anonymous transfers
ExtendedLog /var/log/proftpd/access.log WRITE,READ default
ExtendedLog /var/log/proftpd/auth.log AUTH auth
</Anonymous>
Habe soeben Proftpd installiert und konfiguriert !
Jedoch wenn man was uploaden will schreibt er nur ne 0 Byte Datei , gibt aber keine Fehlermeldung aus!
Hier meine Conf Datei
# This is the ProFTPD configuration file
# $Id: proftpd.conf,v 1.4 2002/12/13 10:33:25 dude Exp $
ServerName "Hell 666"
ServerIdent on "Hell 666"
ServerAdmin
ServerType standalone
#ServerType inetd
DefaultServer on
AccessGrantMsg "User %u logged in."
#DisplayConnect /etc/ftpissue
#DisplayLogin /etc/ftpmotd
#DisplayGoAway /etc/ftpgoaway
DeferWelcome off
# Use this to excude users from the chroot
DefaultRoot ~ !adm
# Use pam to authenticate by default
AuthPAMAuthoritative on
# Do not perform ident nor DNS lookups (hangs when the port is filtered)
IdentLookups off
UseReverseDNS off
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
# Default to show dot files in directory listings
LsDefaultOptions "-a"
# See Configuration.html for these (here are the default values)
#MultilineRFC2228 off
#RootLogin off
#LoginPasswordPrompt on
#MaxLoginAttempts 3
#MaxClientsPerHost none
#AllowForeignAddress off # For FXP
# Allow to resume not only the downloads but the uploads too
AllowRetrieveRestart on
AllowStoreRestart on
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 20
# Set the user and group that the server normally runs at.
User nobody
Group nobody
# This is where we want to put the pid file
ScoreboardFile /var/run/proftpd.score
# Normally, we want users to do a few things.
<Global>
AllowOverwrite yes
<Limit ALL SITE_CHMOD>
AllowAll
</Limit>
</Global>
# Define the log formats
LogFormat default "%h %l %u %t \"%r\" %s %b"
LogFormat auth "%v [%P] %h %t \"%r\" %s"
# A basic anonymous configuration, no upload directories.
<Anonymous ~ftp>
# Uncomment the following line to allow anonymous access
#RequireValidShell off
User ftp
Group ftp
AccessGrantMsg "Anonymous login ok, restrictions apply."
# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias anonymous ftp
# Limit the maximum number of anonymous logins
MaxClients 3 "Sorry, max %m users -- try again later"
# Put the user into /pub right after login
DefaultChdir /
# We want 'welcome.msg' displayed at login, '.message' displayed in
# each newly chdired directory and tell users to read README* files.
DisplayLogin /welcome.msg
DisplayFirstChdir .message
DisplayReadme README*
# Some more cosmetic and not vital stuff
DirFakeUser on ftpadm
DirFakeGroup on ftpadm
# Limit WRITE everywhere in the anonymous chroot
<Limit WRITE SITE_CHMOD>
AllowAll
</Limit>
<Directory uploads/*>
<Limit RMD DELE RTFR RNTO> # Verzeichnisse erstellen, loeschen, Dateien loeschen, Umbennen
DenyAll # wird verboten
</Limit>
<Limit WRITE READ STOR RETR CWD MKD> # Lesen, Schreiben, Verzeichnis wechseln
AllowAll # erlauben
</Limit>
</Directory>
# Don't write anonymous accesses to the system wtmp file (good idea!)
WtmpLog off
# Loggin for the anonymous transfers
ExtendedLog /var/log/proftpd/access.log WRITE,READ default
ExtendedLog /var/log/proftpd/auth.log AUTH auth
</Anonymous>