andras98
04.02.03, 10:37
Mein dmesg - da stimmt einiges nicht oder?
Hab alles neugebaut. (Kernel, und World) so wie im Handbuch beschrieben. Gebracht hats nichts.
Meine Konf:
Amd 1ghz
HPT370 IDE Raid Controller (benötige ich nicht in Freebsd)
Adaptec SCSI Controller 2940U (an diesem hängt die HDD wo Freebsd installiert ist)
Terratec 512i Soundkarte (fm801 kompatibel)
Netzwerkkarte PCI Ne2000 kompatible (benötige ich in Fb nicht)
Netzwerkkarte PCI Realteak (funktioniert einwandfrei)
GeForce 4 Ti4200 AGP
Meine Probleme:
Die GeForce friert das System ein wenn ich die NVidiatreiber verwende. Mit dem "nv" vom X11 funktioniert sie nicht. Mit "vesa" kann ich tun und lass was ich will - er findet keine screens.
Die Soundkarte funktioniert nicht. Keine nodes werden unter /dev angelegt wenn ich entweder mit kldload ein Modul lade oder den Kernel mit pcm kompiliere. Weder kldload noch ein pcm im Kernel liefern irgendeine Rückmeldung.
Da ich ja alles neukompiliert habe und schon sooo viel Zeit reingesteckt habe möchte ich das FreeBSD nicht einfach löschen ;( Aber langsam wirds echt eng. Und trüb ohne X11 ...
Andreas
PS: PNP OS hab ich im Bios auch schon verändert ... hat nichts geholfen
---dmesg ---
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Tue Feb 4 00:11:53 CET 2003
root@jupiter.com:/usr/obj/usr/src/sys/kernel_with_pcm
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06e5000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 999527984 Hz
CPU: AMD Athlon(tm) processor (999.53-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff< FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC
A,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 268435456 (256 MB)
avail memory = 253382656 (241 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 9 entries at 0xc00fdb10
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x9000-0x900f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x9400-0x941f at device 7.2 on pci0
pci_cfgintr: 0:7 INTD routed to irq 10
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f at device 7.3 on pci0
pci_cfgintr: 0:7 INTD routed to irq 10
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
uhub2: Motorola MC141555 hub controller, class 9/0, rev 1.00/1.00, addr 2
uhub2: 5 ports with 5 removable, self powered
atapci1: <HighPoint HPT370 ATA100 controller> port 0xac00-0xacff,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00- 0x9c07 irq 10 at device 9.0 on pci0
ata2: at 0x9c00 on atapci1
ata3: at 0xa400 on atapci1
pci0: <multimedia, audio> at device 10.0 (no driver attached)
pci0: <input device> at device 10.1 (no driver attached)
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xb800-0xb8ff mem 0xdb000000-0xdb000fff irq 11 at device 12.0 on pci0
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem 0xdb001000-0xdb0010ff irq 10 at device 13.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:50:fc:96:10:61
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xc000-0xc01f irq 5 at device 14.0 on pci0
ed0: address 00:02:44:16:2b:63, type NE2000 (16 bit)
orm0: <Option ROMs> at iomem 0xd8000-0xdbfff,0xd4000-0xd77ff,0xd0000-0xd3fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 710C> SCP,VLINK
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 10.000 msec
ad4: 19623MB <IBM-DTLA-305020> [39870/16/63] at ata2-master UDMA100
ad6: 38166MB <WDC WD400BB-00DEA0> [77545/16/63] at ata3-master UDMA100
acd0: DVD-ROM <ASUS DVD-ROM E608> at ata0-master PIO4
acd1: CD-RW <LITE-ON LTR-40125S> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
MBREXT Slice 5 on ad6s1:
[0] f:00 typ:7 s(CHS):1/1/1 e(CHS):255/254/255 s:63 l:42331212
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
da0 at ahc0 bus 0 target 2 lun 0
da0: <QUANTUM FIREBALL ST3.2S 0F04> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 3118MB (6385696 512 byte sectors: 255H 63S/T 397C)
Mounting root from ufs:/dev/da0s1a
lock order reversal
1st 0xc272a788 process lock (process lock) @ /usr/src/sys/kern/kern_descrip.c:2104
2nd 0xc26f9334 filedesc structure (filedesc structure) @ /usr/src/sys/kern/kern_descrip.c:2111
Hab alles neugebaut. (Kernel, und World) so wie im Handbuch beschrieben. Gebracht hats nichts.
Meine Konf:
Amd 1ghz
HPT370 IDE Raid Controller (benötige ich nicht in Freebsd)
Adaptec SCSI Controller 2940U (an diesem hängt die HDD wo Freebsd installiert ist)
Terratec 512i Soundkarte (fm801 kompatibel)
Netzwerkkarte PCI Ne2000 kompatible (benötige ich in Fb nicht)
Netzwerkkarte PCI Realteak (funktioniert einwandfrei)
GeForce 4 Ti4200 AGP
Meine Probleme:
Die GeForce friert das System ein wenn ich die NVidiatreiber verwende. Mit dem "nv" vom X11 funktioniert sie nicht. Mit "vesa" kann ich tun und lass was ich will - er findet keine screens.
Die Soundkarte funktioniert nicht. Keine nodes werden unter /dev angelegt wenn ich entweder mit kldload ein Modul lade oder den Kernel mit pcm kompiliere. Weder kldload noch ein pcm im Kernel liefern irgendeine Rückmeldung.
Da ich ja alles neukompiliert habe und schon sooo viel Zeit reingesteckt habe möchte ich das FreeBSD nicht einfach löschen ;( Aber langsam wirds echt eng. Und trüb ohne X11 ...
Andreas
PS: PNP OS hab ich im Bios auch schon verändert ... hat nichts geholfen
---dmesg ---
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Tue Feb 4 00:11:53 CET 2003
root@jupiter.com:/usr/obj/usr/src/sys/kernel_with_pcm
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06e5000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 999527984 Hz
CPU: AMD Athlon(tm) processor (999.53-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff< FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC
A,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 268435456 (256 MB)
avail memory = 253382656 (241 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 9 entries at 0xc00fdb10
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x9000-0x900f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x9400-0x941f at device 7.2 on pci0
pci_cfgintr: 0:7 INTD routed to irq 10
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f at device 7.3 on pci0
pci_cfgintr: 0:7 INTD routed to irq 10
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
uhub2: Motorola MC141555 hub controller, class 9/0, rev 1.00/1.00, addr 2
uhub2: 5 ports with 5 removable, self powered
atapci1: <HighPoint HPT370 ATA100 controller> port 0xac00-0xacff,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00- 0x9c07 irq 10 at device 9.0 on pci0
ata2: at 0x9c00 on atapci1
ata3: at 0xa400 on atapci1
pci0: <multimedia, audio> at device 10.0 (no driver attached)
pci0: <input device> at device 10.1 (no driver attached)
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xb800-0xb8ff mem 0xdb000000-0xdb000fff irq 11 at device 12.0 on pci0
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem 0xdb001000-0xdb0010ff irq 10 at device 13.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:50:fc:96:10:61
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xc000-0xc01f irq 5 at device 14.0 on pci0
ed0: address 00:02:44:16:2b:63, type NE2000 (16 bit)
orm0: <Option ROMs> at iomem 0xd8000-0xdbfff,0xd4000-0xd77ff,0xd0000-0xd3fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 710C> SCP,VLINK
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 10.000 msec
ad4: 19623MB <IBM-DTLA-305020> [39870/16/63] at ata2-master UDMA100
ad6: 38166MB <WDC WD400BB-00DEA0> [77545/16/63] at ata3-master UDMA100
acd0: DVD-ROM <ASUS DVD-ROM E608> at ata0-master PIO4
acd1: CD-RW <LITE-ON LTR-40125S> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
MBREXT Slice 5 on ad6s1:
[0] f:00 typ:7 s(CHS):1/1/1 e(CHS):255/254/255 s:63 l:42331212
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
da0 at ahc0 bus 0 target 2 lun 0
da0: <QUANTUM FIREBALL ST3.2S 0F04> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 3118MB (6385696 512 byte sectors: 255H 63S/T 397C)
Mounting root from ufs:/dev/da0s1a
lock order reversal
1st 0xc272a788 process lock (process lock) @ /usr/src/sys/kern/kern_descrip.c:2104
2nd 0xc26f9334 filedesc structure (filedesc structure) @ /usr/src/sys/kern/kern_descrip.c:2111