hddtemp Fühler erkennen

[knallzapzerap]

Ich habe bei hddtemp folgende Ausgabe, wie kriege ich nun heraus, ob field 9 die Temperatur darstellt (alle anderen scheiden meiner Ansicht nach aus) oder ob die Platte keinen Fühler besitzt ?

knall:/home/zap # hddtemp /dev/hda
WARNING: Drive /dev/hda doesn't appear in the database of supported drives
WARNING: But using a common value, it reports something.
WARNING: Note that the temperature shown could be wrong.
WARNING: See --help, --debug and --drivebase options.
WARNING: And don't forget you can add your drive to hddtemp.db
/dev/hda: Maxtor : 0°C or °F
knall:/home/zap # hddtemp /dev/hda --debug

================= hddtemp 0.3 beta3 ==================
Model: Maxtor 4D040H2

field(3) = 185
field(4) = 117
field(5) = 0
field(6) = 0
field(7) = 0
field(8) = 1
field(9) = 36
field(10) = 0
field(11) = 0
field(12) = 229
field(192) = 0
field(193) = 0
field(194) = 0
field(195) = 14
field(196) = 0
field(197) = 0
field(198) = 0
field(199) = 0
field(200) = 0
field(201) = 2
field(202) = 0
field(203) = 0
field(204) = 0
field(205) = 0
field(207) = 0
field(208) = 0
field(209) = 0
field(99) = 0
field(100) = 0
field(101) = 0

If one of the field value seems to match the temperature, you can
send me a report so I can add it to the database of supported drives
and/or you can do it yourself by adding an entry in hddtemp.db and send
me the updated hddtemp.db.

Don't forget to compare your value(s) with those in the database.
(see option --drivebase)

[knallzapzerap]

9 ist es definitiv wohl nicht :( 194°C wären doch etwas viel
195 mit 14-16 kommt mir aber wiederum zu wenig vor, immerhin habe ich eine Raumtemp von knapp 23° und kühle die Platte quer durchs Gehäuse mit einem Lüfter.

[Basti_litho]

probiers doch mal mit "smartcrtl" zu finden in der smartsuite, unter anderem zu finden unter:
http://www.linux-ide.org/smart.html

dort findest du auch die temperatur:



Vendor Specific SMART Attributes with Thresholds:
Revision Number: 10
Attribute Flag Value Worst Threshold Raw Value
( 1)Raw Read Error Rate 0x000f 071 067 034 1252
( 3)Spin Up Time 0x0003 090 090 000 0
( 4)Start Stop Count 0x0032 100 100 020 24
( 5)Reallocated Sector Ct 0x0033 100 100 036 0
( 7)Seek Error Rate 0x000f 077 060 030 57183727
( 9)Power On Hours 0x0032 097 097 000 2777
( 10)Spin Retry Count 0x0013 100 100 097 0
( 12)Power Cycle Count 0x0032 100 100 020 54
(194)Temperature 0x0022 040 050 000 40
(195)Hardware ECC Recovered 0x001a 071 066 000 1252
(197)Current Pending Sector 0x0012 100 100 000 0
(198)Offline Uncorrectable 0x0010 100 100 000 0
(199)UDMA CRC Error Count 0x003e 200 200 000 0
(200)Unknown Attribute 0x0000 100 253 000 0
(202)Unknown Attribute 0x0032 100 253 000 0
SMART Error Log:
SMART Error Logging Version: 1
No Errors Logged


Gruss,
Basti_litho

[knallzapzerap]

hm ide-smart von Suse 8.1 habe ich installiert
den Befehl smartcrtl /dev/hda kennt dieser aber leider nicht :(

auch nach der installation von smartsuite 2.1-2 steht mir dieser befehl nicht zur verfügung......mal gucken ob ich ne man oder helpfile entziffern kann ;)

[Basti_litho]

ide-smart ist auch ein extra packet

smartctl ist bei smartsuite dabei.

gruss,
Basti

[knallzapzerap]

hatte es gerade in der help gefunden smartctl und nicht smartcrtl :)
werde mal testen dann tempfühler is 194, mal gucken ob der was ausgibt :)

[knallzapzerap]

hm sieht wohl schlecht aus glaube ich, belehrt mich eines besseren :)

knall:/home/zap # smartctl -a /dev/hda
Device: Maxtor 4D040H2 Supports ATA Version 6
Drive supports S.M.A.R.T. and is enabled
Check S.M.A.R.T. Passed.

General Smart Values:
Off-line data collection status: (0x00) Offline data collection activity was
never started

Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run

Total time to complete off-line
data collection: ( 30) Seconds

Offline data collection
Capabilities: (0x1b)SMART EXECUTE OFF-LINE IMMEDIATE
Automatic timer ON/OFF support
Suspend Offline Collection upon new
command
Offline surface scan supported
Self-test supported

Smart Capablilities: (0x0003) Saves SMART data before entering
power-saving mode
Supports SMART auto save timer

Error logging capability: (0x01) Error logging supported

Short self-test routine
recommended polling time: ( 2) Minutes

Extended self-test routine
recommended polling time: ( 27) Minutes

Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute Flag Value Worst Threshold Raw Value
( 3)Spin Up Time 0x0027 235 235 063 5049
( 4)Start Stop Count 0x0032 253 253 000 117
( 5)Reallocated Sector Ct 0x0033 253 253 063 0
( 6)Read Channel Margin 0x0001 253 253 100 0
( 7)Seek Error Rate 0x000a 253 252 000 0
( 8)Seek Time Preformance 0x0027 253 238 187 35324
( 9)Power On Hours 0x0032 251 251 000 56469
( 10)Spin Retry Count 0x002b 253 252 157 0
( 11)Calibration Retry Count 0x002b 253 252 223 0
( 12)Power Cycle Count 0x0032 253 253 000 229
(192)Power-Off Retract Count 0x0032 253 253 000 0
(193)Load Cycle Count 0x0032 253 253 000 0
(194)Temperature 0x0032 253 253 000 0
(195)Hardware ECC Recovered 0x000a 253 252 000 19
(196)Reallocated Event Count 0x0008 253 253 000 0
(197)Current Pending Sector 0x0008 253 253 000 0
(198)Offline Uncorrectable 0x0008 253 253 000 0
(199)UDMA CRC Error Count 0x0008 199 199 000 0
(200)Unknown Attribute 0x000a 253 252 000 0
(201)Unknown Attribute 0x000a 253 252 000 2
(202)Unknown Attribute 0x000a 253 252 000 0
(203)Unknown Attribute 0x000b 253 252 180 0
(204)Unknown Attribute 0x000a 253 252 000 0
(205)Unknown Attribute 0x000a 253 252 000 0
(207)Unknown Attribute 0x002a 253 252 000 0
(208)Unknown Attribute 0x002a 253 252 000 0
(209)Unknown Attribute 0x0024 253 253 000 0
( 99)Unknown Attribute 0x0004 253 253 000 0
(100)Unknown Attribute 0x0004 253 253 000 0
(101)Unknown Attribute 0x0004 253 253 000 0
SMART Error Log:
SMART Error Logging Version: 1
Error Log Data Structure Pointer: 04
ATA Error Count: 4
Non-Fatal Count: 0

Error Log Structure 1:
DCR FR SC SN CL SH D/H CR Timestamp
00 00 00 00 5e 20 00 70 140
00 3d 00 00 00 00 00 c3 140
00 e4 00 00 00 00 00 c3 140
00 3d 00 00 00 00 00 c3 140
00 fe 00 00 00 00 00 ef 140
00 04 40 40 97 03 00 51 9

Error Log Structure 2:
DCR FR SC SN CL SH D/H CR Timestamp
00 3d 00 00 00 00 00 c3 140
00 fe 00 00 00 00 00 ef 140
00 c0 00 00 00 00 00 c3 140
00 e4 00 00 00 00 00 c3 140
00 fe 00 00 00 00 00 ef 140
00 04 50 40 97 03 00 51 9

Error Log Structure 3:
DCR FR SC SN CL SH D/H CR Timestamp
00 e4 00 00 00 00 00 c3 140
00 fe 00 00 00 00 00 ef 140
00 d0 00 00 0c 00 00 c3 141
00 e4 00 00 00 00 00 c3 141
00 fe 00 00 00 00 00 ef 141
00 04 50 40 97 23 00 51 9

Error Log Structure 4:
DCR FR SC SN CL SH D/H CR Timestamp
00 db 00 00 4f c2 00 b0 135
00 d8 00 00 4f c2 00 b0 135
00 da 00 00 4f c2 00 b0 135
00 d9 00 00 4f c2 00 b0 135
00 fe 00 00 00 00 00 ef 135
00 04 50 42 97 23 00 51 4
knall:/home/zap # mcedit /etc/hddtemp.db



/etc/hddtemp.db angepasst an 194 ergibt:

knall:/home/zap # hddtemp /dev/hda
/dev/hda: Maxtor 4D040H2: 0°C