PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : cdrecord+plexwriter 12/10/32s+intenso 800mb=error ?



deathb
15.01.03, 21:16
hi, diese kombi will nicht laufen...
hier mein xter error

Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,4,0'
scsibus: 0 target: 4 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Driveropts: 'burnproof'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W1210S'
Revision : '1.04'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 2394336 = 2338 KB
FIFO size : 4194304 = 4096 KB
Track 01: data unknown length
Total size: 0 MB (00:00.00) = 0 sectors
Lout start: 0 MB (00:02/00) = 0 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -12369 (97:17/06)
ATIP start of lead out: 45000 (10:02/00)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 69
Manufacturer: Moser Baer India Limited
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
cdrecord: WARNING: Total disk size unknown. Data may not fit on disk.
Starting to write CD/DVD at speed 12 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Starting new track at sector: 0



Track 01: 87 MB written (fifo 98%) [buf 97%] 12.5x.cdrecord: Input/output e
rror. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 AF B5 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 09 00 00 00 00 0A 00 00 00 00 80 0A 00 00
Sense Key: 0x9 Vendor Unique, Segment 0
Sense Code: 0x80 Qual 0x0A (vendor unique sense code 0x80) [No matching qualifie
r] Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.001s timeout 40s

write track data: error after 92121088 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 59.667s
Min drive buffer fill was 95%
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
Fixating time: 0.002s
cdrecord: fifo had 1515 puts and 1452 gets.
cdrecord: fifo was 0 times empty and 1185 times full, min fill was 95%.

hat jemand eine idee ?

deathb
25.01.03, 22:24
cd typ wird vom brenner nicht erkannt, -overburn hilft weiter