Malekith
21.12.02, 10:04
Hallo,
ich habe mir K3B gezogen, doch er macht seltsame Sachen.
Ich habe die IDE-SCSI simulation erfolgreich eingeschaltet.
Mein Brenner wird vom System als der der es sein sollte erkannt (TOSHIBA CDRW/DVD SDR2102)
Und hier sind die Probleme:
Mein Brenner belege angeblich (laut K3B) alles von sg0 - sg6, cdrecord -scanbus gibt den Brenner auf 0,0,0 an.
Wenn ich mit K3B eine CD brenne, dann hört der Vorgana nach Operation starts auf.
(K3bDataJob) iso size parsed: 2704s
Detected SG driver version: 3.1.22
SG: Maximum transfer length: 65536
(cdrecord) scsidev: '0,0,0'
(cdrecord) scsibus: 0 target: 0 lun: 0
(cdrecord) Linux sg driver version: 3.1.22
(cdrecord) Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
(cdrecord) TOC Type: 3 = CD-ROM XA mode 2
(cdrecord) Using libscg version 'schily-0.5'
(cdrecord) Driveropts: 'burnfree'
(cdrecord) atapi: 1
(cdrecord) Device type : Removable CD-ROM
(cdrecord) Version : 0
(cdrecord) Response Format: 2
(cdrecord) Capabilities :
(cdrecord) Vendor_info : 'TOSHIBA '
(cdrecord) Identifikation : 'CDRW/DVD SDR2102'
(cdrecord) Revision : '1D13'
(cdrecord) Device seems to be: Generic mmc CD-RW.
(cdrecord) Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
(cdrecord) Driver flags : SWABAUDIO
(cdrecord) Drive buf size : 1312768 = 1282 KB
(cdrecord) FIFO size : 4194304 = 4096 KB
(cdrecord) Total size: 6 MB (00:36.08) = 2706 sectors
(cdrecord) Lout start: 6 MB (00:38/06) = 2706 sectors
(cdrecord) Current Secsize: 2048
(cdrecord) ATIP info from disk:
(cdrecord) Indicated writing power: 4
(cdrecord) Is not unrestricted
(cdrecord) Is not erasable
(cdrecord) Disk sub type: Medium Type A, low Beta category (A-) (2)
(cdrecord) ATIP start of lead in: -12508 (97:15/17)
(cdrecord) ATIP start of lead out: 359848 (79:59/73)
(cdrecord) Disk type: Short strategy type (Phthalocyanine or similar)
(cdrecord) Manuf. index: 22
(cdrecord) Manufacturer: Ritek Co.
(cdrecord) Blocks total: 359848 Blocks current: 359848 Blocks remaining: 357142
(cdrecord) Starting to write CD/DVD at speed 8 in dummy mode for multi session.
(cdrecord) Waiting for reader process to fill input buffer ...
(cdrecord) input buffer ready.
(cdrecord) /usr/bin/cdrecord: Bad driver opts 'burnfree'.
(cdrecord) Driver options:
(cdrecord) burnproof Prepare writer to use Sanyo BURN-Proof technology
(cdrecord) noburnproof Disable using Sanyo BURN-Proof technology
Das ist das einzige was ich über Konsole rauskriegen konnte.
Kann irgendwer helfen?
Vielen Dank im Vorraus,
Marcel
EDIT: Nach 6min10sek bekomme ich von K3B folgende Fehlermeldung:
cdrecord
-----------------------
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.5'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'CDRW/DVD SDR2102'
Revision : '1D13'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1312768 = 1282 KB
FIFO size : 4194304 = 4096 KB
18.93% done, estimate finish Sat Dec 21 11:00:39 2002
37.28% done, estimate finish Sat Dec 21 11:00:39 2002
55.62% done, estimate finish Sat Dec 21 11:00:39 2002
Track 01: data 5 MB
Total size: 6 MB (00:36.08) = 2706 sectors
Lout start: 6 MB (00:38/06) = 2706 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 357142
Starting to write CD/DVD at speed 8 in dummy mode for multi session.
Last chance to quit, starting dummy write in 9 seconds.
8 seconds.
7 seconds.
6 seconds.
5 seconds.
4 seconds.
3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready.
/usr/bin/cdrecord: Bad driver opts 'burnfree'.
Driver options:
burnproof Prepare writer to use Sanyo BURN-Proof technology
noburnproof Disable using Sanyo BURN-Proof technology
/usr/bin/cdrecord: faio_wait_on_buffer for writer timed out.
Track 01: data 5 MB
Total size: 6 MB (00:36.08) = 2706 sectors
Lout start: 6 MB (00:38/06) = 2706 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 357142
misc
-----------------------
2704
ich habe mir K3B gezogen, doch er macht seltsame Sachen.
Ich habe die IDE-SCSI simulation erfolgreich eingeschaltet.
Mein Brenner wird vom System als der der es sein sollte erkannt (TOSHIBA CDRW/DVD SDR2102)
Und hier sind die Probleme:
Mein Brenner belege angeblich (laut K3B) alles von sg0 - sg6, cdrecord -scanbus gibt den Brenner auf 0,0,0 an.
Wenn ich mit K3B eine CD brenne, dann hört der Vorgana nach Operation starts auf.
(K3bDataJob) iso size parsed: 2704s
Detected SG driver version: 3.1.22
SG: Maximum transfer length: 65536
(cdrecord) scsidev: '0,0,0'
(cdrecord) scsibus: 0 target: 0 lun: 0
(cdrecord) Linux sg driver version: 3.1.22
(cdrecord) Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
(cdrecord) TOC Type: 3 = CD-ROM XA mode 2
(cdrecord) Using libscg version 'schily-0.5'
(cdrecord) Driveropts: 'burnfree'
(cdrecord) atapi: 1
(cdrecord) Device type : Removable CD-ROM
(cdrecord) Version : 0
(cdrecord) Response Format: 2
(cdrecord) Capabilities :
(cdrecord) Vendor_info : 'TOSHIBA '
(cdrecord) Identifikation : 'CDRW/DVD SDR2102'
(cdrecord) Revision : '1D13'
(cdrecord) Device seems to be: Generic mmc CD-RW.
(cdrecord) Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
(cdrecord) Driver flags : SWABAUDIO
(cdrecord) Drive buf size : 1312768 = 1282 KB
(cdrecord) FIFO size : 4194304 = 4096 KB
(cdrecord) Total size: 6 MB (00:36.08) = 2706 sectors
(cdrecord) Lout start: 6 MB (00:38/06) = 2706 sectors
(cdrecord) Current Secsize: 2048
(cdrecord) ATIP info from disk:
(cdrecord) Indicated writing power: 4
(cdrecord) Is not unrestricted
(cdrecord) Is not erasable
(cdrecord) Disk sub type: Medium Type A, low Beta category (A-) (2)
(cdrecord) ATIP start of lead in: -12508 (97:15/17)
(cdrecord) ATIP start of lead out: 359848 (79:59/73)
(cdrecord) Disk type: Short strategy type (Phthalocyanine or similar)
(cdrecord) Manuf. index: 22
(cdrecord) Manufacturer: Ritek Co.
(cdrecord) Blocks total: 359848 Blocks current: 359848 Blocks remaining: 357142
(cdrecord) Starting to write CD/DVD at speed 8 in dummy mode for multi session.
(cdrecord) Waiting for reader process to fill input buffer ...
(cdrecord) input buffer ready.
(cdrecord) /usr/bin/cdrecord: Bad driver opts 'burnfree'.
(cdrecord) Driver options:
(cdrecord) burnproof Prepare writer to use Sanyo BURN-Proof technology
(cdrecord) noburnproof Disable using Sanyo BURN-Proof technology
Das ist das einzige was ich über Konsole rauskriegen konnte.
Kann irgendwer helfen?
Vielen Dank im Vorraus,
Marcel
EDIT: Nach 6min10sek bekomme ich von K3B folgende Fehlermeldung:
cdrecord
-----------------------
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.5'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'CDRW/DVD SDR2102'
Revision : '1D13'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1312768 = 1282 KB
FIFO size : 4194304 = 4096 KB
18.93% done, estimate finish Sat Dec 21 11:00:39 2002
37.28% done, estimate finish Sat Dec 21 11:00:39 2002
55.62% done, estimate finish Sat Dec 21 11:00:39 2002
Track 01: data 5 MB
Total size: 6 MB (00:36.08) = 2706 sectors
Lout start: 6 MB (00:38/06) = 2706 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 357142
Starting to write CD/DVD at speed 8 in dummy mode for multi session.
Last chance to quit, starting dummy write in 9 seconds.
8 seconds.
7 seconds.
6 seconds.
5 seconds.
4 seconds.
3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready.
/usr/bin/cdrecord: Bad driver opts 'burnfree'.
Driver options:
burnproof Prepare writer to use Sanyo BURN-Proof technology
noburnproof Disable using Sanyo BURN-Proof technology
/usr/bin/cdrecord: faio_wait_on_buffer for writer timed out.
Track 01: data 5 MB
Total size: 6 MB (00:36.08) = 2706 sectors
Lout start: 6 MB (00:38/06) = 2706 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 357142
misc
-----------------------
2704