CMI8330 unter Mandrake 9.0 installieren

[SPEEDYLIX]

Wie läßt sich die CMI8330 unter mandrake 9.0 installieren, die dort als isa-pnp-karte identifiziert
wird.

welche Eintragungen in die modules.conf und eventuell in die isapnp.conf muss ich machen?

In welcher Reihenfolge muss ich vorgehen und was muss ich testen?
Prinzipiell läuft die Karte, da sie unter Mandrake 7.2 schon funktioniert hat auch mit OSS unter SuSe 6.0

Diesmal würd ich es gern mit ALSA versuchen, aber auch mit OSSfree wärs OK!

Wie prüfe ich, welche Module im Mandrake 9.0 Standart-Kernel schon geladen sind und
welche ich eventuell erst noch laden muss?

:)

[SPEEDYLIX]

keine Ahnung wie ich das geschafft hab, aber jetzt hab ich plötzlich Sound und kann Fernsehen mit Senderwechsel und Ton.

Nur zwei kleine Wermutsftropfen bleiben noch:

Es gibt keinen Mixer und keine Sendertabelle unter meinem USER, obwohl ich diese als root eingerichtet hab
und ich auch zu jedem wechseln kann:

meine isapnp.conf (für CMI8330):
(CONFIGURE CMI0001/16777472 (LD 3
(IO 0 (SIZE 16) (BASE 0x0220))
(INT 0 (IRQ 5 (MODE +E)))
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 5))
(NAME "CMI0001/16777472[3]{CMI8330/C3D Audio Adapter}")
(ACT Y)
))

(WAITFORKEY)

meine momentane modules.conf: (MIRO PVTV)
probeall usb-interface usb-uhci
alias eth0 8139too
alias sound-slot-0 off
alias sound ad1848
alias synth0 opl3
options ad1848 io=530 irq=5 dma=1 soundpro=1
options opl3 io=0x388
options bttv radio=0 card=1 gbuffers=4
options card=1 gbuffers=4


Bin erst mal ganz glücklich, wäre aber für weitere Hilfe dankbar!

[SPEEDYLIX]

Was bedeutet die meldung CMI8330 quirk von dmesg:

isapnp: Scanning for PnP cards...
isapnp: CMI8330 quirk - fixing interrupts and dma
isapnp: Card 'CMI8330/C3D Audio Adapter'
isapnp: 1 Plug & Play card detected total
++++++++++++++++++++++++++++++++++++++++++
Vielleicht kann von euch jemand ein Problem bei meiner Installation entdecken,
wenn ich hier die komplette Meldung abdrucke:

Linux version 2.4.19-16mdk (quintela@bi.mandrakesoft.com) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000c000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
192MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 49152
zone(0): 4096 pages.
zone(1): 45056 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=341 devfs=mount hdc=ide-scsi
ide_setup: hdc=ide-scsi
No local APIC present or hardware disabled
Initializing CPU#0
Detected 551.267 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1101.00 BogoMIPS
Memory: 191904k/196608k available (1176k kernel code, 4320k reserved, 444k data, 136k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: AMD K6
PCI: PCI BIOS revision 2.10 entry at 0xfb000, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: CMI8330 quirk - fixing interrupts and dma
isapnp: Card 'CMI8330/C3D Audio Adapter'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTLA-305040, ATA DISK drive
hdb: IBM-DJNA-351520, ATA DISK drive
hdc: 12X8X32, ATAPI CD/DVD-ROM drive
hdd: HL-DT-STDVD-ROM GDR8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=5005/255/63, UDMA(33)
hdb: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=1869/255/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0:<6> [DM6:DDO] [remap +63] [5005/255/63] p1 p2 < p5 p6 p7 >
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 p8 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 144k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
reiserfs: checking transaction log (device 03:41) ...
Warning, log replay starting on readonly filesystem
reiserfs: replayed 37 transactions in 5 seconds
Using r5 hash to sort names
ReiserFS version 3.6.25
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 18:49:04 Sep 20 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
Adding Swap: 401584k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: ATAPI Model: CD-R/RW 12X8X32 Rev: 9.CC
Type: CD-ROM ANSI SCSI revision: 02
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.4 (20020719)
i2c-algo-bit.o: i2c bit algorithm module version 2.6.4 (20020719)
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT82C597 [Apollo VP3]
bttv: Bt8xx card found (0).
PCI: Found IRQ 12 for device 00:09.0
bttv0: Bt848 (rev 18) at 00:09.0, irq: 12, latency: 64, mmio: 0xea001000
bttv0: using: BT848A(MIRO PCTV) [card=1,insmod option]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=1 tuner=0 radio=no stereo=no
bttv0: using tuner=0
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
bttv0: i2c attach [client=Temic PAL (4002 FH5),ok]
bttv0: registered device video0
bttv0: registered device vbi0
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
reiserfs: checking transaction log (device 03:45) ...
reiserfs: replayed 3 transactions in 2 seconds
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:48) ...
reiserfs: replayed 15 transactions in 3 seconds
Using r5 hash to sort names
ReiserFS version 3.6.25
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
reiserfs: checking transaction log (device 03:47) ...
reiserfs: replayed 28 transactions in 6 seconds
Using r5 hash to sort names
ReiserFS version 3.6.25
8139too Fast Ethernet driver 0.9.25
PCI: Found IRQ 11 for device 00:0a.0
IRQ routing conflict for 00:0a.0, have irq 7, want irq 11
eth0: RealTek RTL8139 Fast Ethernet at 0xccbc6000, 00:30:84:2a:db:3d, IRQ 7
eth0: Identified 8139 chip type 'RTL-8139C'
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Each connection entry needs 116 bytes at least
IPVS: ipvs loaded.
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 1.1.4.1
HiSax: Layer2 Revision 1.1.4.1
HiSax: TeiMgr Revision 1.1.4.1
HiSax: Layer3 Revision 1.1.4.1
HiSax: LinkLayer Revision 1.1.4.1
HiSax: Approval certification valid
HiSax: Approved with ELSA Microlink PCI cards
HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
HiSax: Approved with Sedlbauer Speedfax + cards
HiSax: Approved with HFC-S PCI A based cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: AVM PCI driver Rev. 1.1.4.1
PCI: Assigned IRQ 11 for device 00:08.0
AVM PCI: stat 0x2020a
AVM PCI: Class A Rev 2
HiSax: AVM Fritz!PCI config irq:11 base:0xE800
AVM PCI: ISAC version (0): 2086/2186 V1.1
AVM Fritz PnP/PCI: IRQ 11 count 0
AVM Fritz PnP/PCI: IRQ 11 count 5
HiSax: DSS1 Rev. 1.1.4.1
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added
HiSax: debugging flags card 1 set to 4
isdn: Verbose-Level is 2
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
ad1848: CMI 8330 SoundPRO detected
ad1848: ISAPnP reports 'CMI 8330 SoundPRO' at i/o 0x530, irq 5, dma 1, -1
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 150M
agpgart: Detected Via MVP3 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 on VIA MVP3 @ 0xe0000000 64MB
[drm] Initialized mga 3.0.2 20010321 on minor 0
parport0: PC-style at 0x278 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
inserting floppy driver for 2.4.19-16mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
PPP generic driver version 2.4.2
HDLC line discipline: version $Revision: 3.3 $, maxframe=4096
N_HDLC line discipline registered.