newbie76
25.10.02, 23:02
ich habe vor kurzem k3b 0.7 für suse 8.0 als rpm runtergeladen, problemlos installiert und sowohl eine daten als auch eine audio-cd super einfach gebrannt. irgendwas muss ich jetzt aber verändert haben, denn jetzt bricht k3b bei jeder art des brennens beim fixiating ab, egal ob im simulierten modus oder im realen. ich hab mal das debugging output als anlage beigefügt. wo ist das problem, was habe ich falsch gemacht ?
ich hab auch schon k3b deinstalliert und wieder neu installiert. aber das brachte nichs. ich habe das gefühl, das liegt auch nicht an k3b direkt. bin dankbar über jeden tipp, denn k3b war das erste programm, wo ich den brenner zum laufen gebracht habe.
cdrecord
-----------------------
scsidev: '/dev/sg0'
devname: '/dev/sg0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.1.22
Cdrecord 1.11a28 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.6'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8080B '
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1024000 = 1000 KB
FIFO size : 2097152 = 2048 KB
Track 01: audio 40 MB (04:01.52) no preemp pad
Track 02: audio 36 MB (03:35.35) no preemp pad
Total size: 77 MB (07:38.89) = 34417 sectors
Lout start: 77 MB (07:40/67) = 34417 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 325431
Starting to write CD/DVD at speed 8 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 9 seconds.
8 seconds.
7 seconds.
6 seconds.
5 seconds.
4 seconds.
3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ...
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
input buffer ready.
Starting new track at sector: 0
Track 01: 0 of 40 MB written.
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 0 bytes
Writing time: 5.020s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.002s
/usr/bin/cdrecord: fifo had 32 puts and 1 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
ich hab auch schon k3b deinstalliert und wieder neu installiert. aber das brachte nichs. ich habe das gefühl, das liegt auch nicht an k3b direkt. bin dankbar über jeden tipp, denn k3b war das erste programm, wo ich den brenner zum laufen gebracht habe.
cdrecord
-----------------------
scsidev: '/dev/sg0'
devname: '/dev/sg0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.1.22
Cdrecord 1.11a28 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.6'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8080B '
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1024000 = 1000 KB
FIFO size : 2097152 = 2048 KB
Track 01: audio 40 MB (04:01.52) no preemp pad
Track 02: audio 36 MB (03:35.35) no preemp pad
Total size: 77 MB (07:38.89) = 34417 sectors
Lout start: 77 MB (07:40/67) = 34417 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 325431
Starting to write CD/DVD at speed 8 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 9 seconds.
8 seconds.
7 seconds.
6 seconds.
5 seconds.
4 seconds.
3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ...
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
input buffer ready.
Starting new track at sector: 0
Track 01: 0 of 40 MB written.
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 0 bytes
Writing time: 5.020s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.002s
/usr/bin/cdrecord: fifo had 32 puts and 1 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.