Archiv verlassen und diese Seite im Standarddesign anzeigen : Monitor läuft nicht in 1024*768
Guten Tag.
Bei meiner Freundin habe ich ein merkwürdiges Problem. Sie verwendet Debian - Woody.
Und zwar hat sie einen 17 Zoll Monitor(Beliniea Maxdata) aber 1024x768 will einfach nicht laufen. Je nachdem wie ich mit den Settings spiele komme ich in 800x600 und kann 1024 nicht auswählen, OBWOHL es an erster Stelle in der XConfig steht(Mit STRG ALT + kann ich auch nicht zu 1024 switchen) ODER ich erhalte ein FLIMMERNDES Bild ODER auch einen schwarzen Screen, also garkein Bild.
Woran kann es liegen? Da ich die vertikale und horizontale Bildwiederholfrequenz nicht kenne hab ich mit den Standardsettings von dpkg-reconfigure (debconf) gespielt ohne Erfolg.
hallo,
ist der da vielleicht bei ?
http://www.maxdata.de/produktkatalog/monitore/default.asp
grüsse
lard
Ich habe das gleiche Problem. Ich habe einen Belinea 106020 und Red Hat 9.0 installiert. Schon bei der Installation wurde mein Monitor nicht erkannt. Später habe ich versucht eine 1024x768 Auflösung zu versuchen, doch das größte was mir RH anbot war 800 x 600.
Nun habe ich in /etc/X11/XF86Config die Auflösung unter Screens dazugefügt. Doch beim Neustart vom XServer bleibt alles beim alten.
Kann mir jemand weiterhelfen?
Hallo,
sind die richtigen Bildwiederholfrequenzen (max. HZ- und KHz Zahl) korrekt eingetragen?
Ist das Flimmernde Bild verzerrt oder flimmert es nur unangenehm für die augen? Kommt auch 'out of range' vom Monitor ==> falsche werte, s.o.?
Das ist warscheinlich ein Config fehler, postet mal eure config.
Die Forensuche hats auch schonmal gebracht.
Gruss Robert
Also mein Config sieht so aus.
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unprobed Monitor"
HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "Videocard vendor"
BoardName "ATI Radeon 9000"
VideoRam 65536
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Alles andere kann ich verneinen. Es flimmert nicht und ich bekomme auch keine Fehlermeldungen. Es ist alles nur so riesig auf einem 19'' Zoll-Monitor.
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.