Eremit
20.10.02, 14:43
hallo,
eigentlich sollte es ja ganz einfach sein mit der geforce 2 filme abzuspielen und diese auf dem fernseher zu betrachten. bei mir geht das aber irgendwie nicht.
nach folgender anleitung habe ich es gemacht:
http://www.iofcea.de/cgi-bin/seite.pl?file=linuxtvout
ich rufe das script auf, der monitor wird schwarz und es passiert einfach nichts. der fernseher zeigt kein bild an. woran kann das nun liegen? anbei meine XF86Config.
ach ja. hier noch die etwas gekürzte ausgabe des scriptes.
ingo@eremit:~> ./TV-OUT
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: SuSE Linux [ELF] SuSE
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.1.log", Time: Sun Oct 20 15:35:17 2002
(==) Using config file: "/etc/X11/XF86Config"
Dies ist xine (X11 gui) - Ein freier Video-Player v0.9.13
(c) 2000-2002 G. Bartsch und das xine Projektteam.
Kompiliert mit xine Bibliothek 0.9.13 [Wed 07 Aug 2002 16:03:32]-[gcc version 2.
95.3 20010315 (SuSE)]-[Linux 2.4.18-4GB i686].
xine Bibliothek, Version 0.9.13 (0.9.13) gefunden.
(II) [GLX]: Calling GlxExtensionInit
XServer Hersteller: The XFree86 Project, Inc. Version: 40200000,
Protokollversion: 11, Revision: 0,
Verfügbare Screen(s): 1, benutze 0
Tiefe: 24.
Display is not using Xinerama.
video_out_xv: using Xv port 86 from adaptor NV10 Video Overlay for hardware colo
rspace conversion and scaling.
video_out_xv: double buffering mode = 1
video_out_xv: port attribute XV_COLORKEY value is 66046
video_out_xv: port attribute XV_AUTOPAINT_COLORKEY value is 1
video_out_xv: port attribute XV_BRIGHTNESS value is 0
video_out_xv: port attribute XV_CONTRAST value is 4096
video_out_xv: port attribute XV_SATURATION value is 4096
video_out_xv: port attribute XV_HUE value is 0
video_out_xv: this adaptor supports the yuy2 format.
video_out_xv: this adaptor supports the yv12 format.
load_plugins: video output plugin Xv successfully loaded.
audio_alsa_out : supported modes are 8bit mono stereo (4-channel not enabled in
xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in
xine config) (a/52 and DTS pass-through not enabled in xine config)
load_plugins: audio output plugin alsa09 successfully loaded.
xine: xine_init entered
xine: using MMXEXT optimized memcpy()
xine-scr_init: complete
load_plugins:
...........................
Video-Dekodierungs-Plugin gefunden :
..................................
video_out: thread created
metronom: start_clock (at 0)
xine_play: xine open file:///usr/local/share/xine/skins/xine_logo.mpv, start pos
= 0, start time = 0 (sec)
xine: using input plugin >file< for this MRL (file:///usr/local/share/xine/skins
/xine_logo.mpv).
Benutze Plugin 'file' für MRL 'file:///usr/local/share/xine/skins/xine_logo.mpv'
demux_avi: input capabilities = 649
demux_avi: AVI_init failed (AVI_errno: 9)
System-layer Format 'MPEG_ELEM' erkannt.
metronom: video discontinuity #1, type is 0, disc_off is 0
metronom: waiting for audio discontinuity #1
metronom: audio discontinuity #1, type is 0, disc_off 0
metronom: waiting for in_discontinuity update #1
Using MMXEXT for IDCT transform
Using MMXEXT for motion compensation
video_decoder: using decoder >mpeg2dec<
using video decoder plugin 'mpeg2dec'
libmpeg2: frame size is 592 x 448
libmpeg2: frame size 592 x 448
tvmode: cannot connect to nvtvd - TV mode switching disabled
demux_elem: demux loop finished.
libmpeg2: blasting out current frame on close
video_out: possible still frame (fifosize = 0)
xine_stop
xine_stop: stopping demuxer
demux_elem: stop...ignored
xine_stop: stopped demuxer
xine_stop: done
xine_play: xine open file:///usr/local/share/xine/skins/xine_logo.mpv, start pos = 0, start time = 0 (sec)
xine: using input plugin >file< for this MRL (file:///usr/local/share/xine/skins /xine_logo.mpv).
Benutze Plugin 'file' für MRL 'file:///usr/local/share/xine/skins/xine_logo.mpv'
demux_avi: input capabilities = 649
demux_avi: AVI_init failed (AVI_errno: 9)
System-layer Format 'MPEG_ELEM' erkannt.
ingo@eremit:~> FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc:unscaled" refcou nt is 2, should be 1; fixing.
(II) [GLX]: Calling GlxExtensionInit
was mich etwas stutzig macht ist die zeile:
tvmode: cannot connect to nvtvd - TV mode switching disabled
Eremit
eigentlich sollte es ja ganz einfach sein mit der geforce 2 filme abzuspielen und diese auf dem fernseher zu betrachten. bei mir geht das aber irgendwie nicht.
nach folgender anleitung habe ich es gemacht:
http://www.iofcea.de/cgi-bin/seite.pl?file=linuxtvout
ich rufe das script auf, der monitor wird schwarz und es passiert einfach nichts. der fernseher zeigt kein bild an. woran kann das nun liegen? anbei meine XF86Config.
ach ja. hier noch die etwas gekürzte ausgabe des scriptes.
ingo@eremit:~> ./TV-OUT
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: SuSE Linux [ELF] SuSE
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.1.log", Time: Sun Oct 20 15:35:17 2002
(==) Using config file: "/etc/X11/XF86Config"
Dies ist xine (X11 gui) - Ein freier Video-Player v0.9.13
(c) 2000-2002 G. Bartsch und das xine Projektteam.
Kompiliert mit xine Bibliothek 0.9.13 [Wed 07 Aug 2002 16:03:32]-[gcc version 2.
95.3 20010315 (SuSE)]-[Linux 2.4.18-4GB i686].
xine Bibliothek, Version 0.9.13 (0.9.13) gefunden.
(II) [GLX]: Calling GlxExtensionInit
XServer Hersteller: The XFree86 Project, Inc. Version: 40200000,
Protokollversion: 11, Revision: 0,
Verfügbare Screen(s): 1, benutze 0
Tiefe: 24.
Display is not using Xinerama.
video_out_xv: using Xv port 86 from adaptor NV10 Video Overlay for hardware colo
rspace conversion and scaling.
video_out_xv: double buffering mode = 1
video_out_xv: port attribute XV_COLORKEY value is 66046
video_out_xv: port attribute XV_AUTOPAINT_COLORKEY value is 1
video_out_xv: port attribute XV_BRIGHTNESS value is 0
video_out_xv: port attribute XV_CONTRAST value is 4096
video_out_xv: port attribute XV_SATURATION value is 4096
video_out_xv: port attribute XV_HUE value is 0
video_out_xv: this adaptor supports the yuy2 format.
video_out_xv: this adaptor supports the yv12 format.
load_plugins: video output plugin Xv successfully loaded.
audio_alsa_out : supported modes are 8bit mono stereo (4-channel not enabled in
xine config) (5-channel not enabled in xine config) (5.1-channel not enabled in
xine config) (a/52 and DTS pass-through not enabled in xine config)
load_plugins: audio output plugin alsa09 successfully loaded.
xine: xine_init entered
xine: using MMXEXT optimized memcpy()
xine-scr_init: complete
load_plugins:
...........................
Video-Dekodierungs-Plugin gefunden :
..................................
video_out: thread created
metronom: start_clock (at 0)
xine_play: xine open file:///usr/local/share/xine/skins/xine_logo.mpv, start pos
= 0, start time = 0 (sec)
xine: using input plugin >file< for this MRL (file:///usr/local/share/xine/skins
/xine_logo.mpv).
Benutze Plugin 'file' für MRL 'file:///usr/local/share/xine/skins/xine_logo.mpv'
demux_avi: input capabilities = 649
demux_avi: AVI_init failed (AVI_errno: 9)
System-layer Format 'MPEG_ELEM' erkannt.
metronom: video discontinuity #1, type is 0, disc_off is 0
metronom: waiting for audio discontinuity #1
metronom: audio discontinuity #1, type is 0, disc_off 0
metronom: waiting for in_discontinuity update #1
Using MMXEXT for IDCT transform
Using MMXEXT for motion compensation
video_decoder: using decoder >mpeg2dec<
using video decoder plugin 'mpeg2dec'
libmpeg2: frame size is 592 x 448
libmpeg2: frame size 592 x 448
tvmode: cannot connect to nvtvd - TV mode switching disabled
demux_elem: demux loop finished.
libmpeg2: blasting out current frame on close
video_out: possible still frame (fifosize = 0)
xine_stop
xine_stop: stopping demuxer
demux_elem: stop...ignored
xine_stop: stopped demuxer
xine_stop: done
xine_play: xine open file:///usr/local/share/xine/skins/xine_logo.mpv, start pos = 0, start time = 0 (sec)
xine: using input plugin >file< for this MRL (file:///usr/local/share/xine/skins /xine_logo.mpv).
Benutze Plugin 'file' für MRL 'file:///usr/local/share/xine/skins/xine_logo.mpv'
demux_avi: input capabilities = 649
demux_avi: AVI_init failed (AVI_errno: 9)
System-layer Format 'MPEG_ELEM' erkannt.
ingo@eremit:~> FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc:unscaled" refcou nt is 2, should be 1; fixing.
(II) [GLX]: Calling GlxExtensionInit
was mich etwas stutzig macht ist die zeile:
tvmode: cannot connect to nvtvd - TV mode switching disabled
Eremit