PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : SoundBlaster Live Value und Alsa 0.9



[EisTea]
02.09.02, 21:07
Hallo Leute!
Ich bin mit einer Neuinstallation meines Rechners von den Kernel OSS Sound Treibern auf Alsa 0.9 umgestiegen. Ich hatte schon bei den OSS Treibern keinen Bass Regler mehr gehabt :-( Jetzt, bei Alsa ist einer dabei, allerdings höre ich keinen Unterschied, wenn ich den Regler auf- oder zudrehe. Wenn ich alsamixer aufrufe, steht unter Chip links oben auch "TriTech (3)", obwohl das snd-emu10k1 modul geladen wird.
Habe ich da eventuel was falsch konfiguriert?

Für jede Hilfe bin ich dankbar!!

P.S. benutze übrigens Gentoo 1.2

Columbo0815
05.09.02, 19:42
Hi,
poste mal deine modules.conf!
Gruß Columbo

[EisTea]
06.09.02, 14:59
Alles klar, hier ist die generierte modules.conf:


### This file is automatically generated by update-modules
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modules.d and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modules.d/aliases
# Aliases to tell insmod/modprobe which modules to use

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet

alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5

alias char-major-195 NVdriver
alias /dev/nvidiactl char-major-195

### update-modules: end processing /etc/modules.d/aliases

### update-modules: start processing /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header: /home/cvsroot/gentoo-x86/media-sound/alsa-driver/files/alsa-modules.conf,v 1.3 2002/06/24 18:05:58 agenkin Exp $

# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore

##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
#
## ALSA portion
alias snd-card-0 snd-emu10k1
#post-install snd-emu10k1 modprobe snd-emu10k1-synth
#
## alias snd-card-1 snd-ens1371
#
## OSS/Free portion

Hoffe es hilft :-)

Cheers EisTea

Columbo0815
06.09.02, 19:44
Hi,
hast du auch make snddevices ausgeführt?
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
und das auch?
was gibt alsasound start bzw stop aus?
Auszug aus einer Suse Modules.conf (Nicht meine, ich benutz OSS):

alias char-major-116 snd
alias snd-card-0 snd-emu10k1
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-11 snd-mixer-oss
alias sound-service-0-12 snd-pcm-oss
options snd snd_cards_limit=1 snd_major=116
options snd-emu10k1 snd_index=0

Gruß Columbo

[EisTea]
12.09.02, 22:23
HI Columbo!

Ich habe die alsadriver über emerge installiert. Ich denke, das das script ebenfalls ausgeführt wurde. Außerdem habe ich den devfsd laufen (mit dem ich mich leider überhaubt nicht auskenne :-( Allerdings sollte er doch devices auf anfrage automatisch erstellen, oder?)

Habe auch mal deine Config Vorschläge benutzt, sie haben aber leider nicht geholfen :-((


EisTea