PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Ich Bin Am Ende



84R7
31.08.02, 15:42
hi !
ich habe schon 20 kernel erstellt , entweder findet er root nich , oder bleibt vorher hängen.
ich dreh gleich am rad !!! Xo/
wäre jemand vieleicht so freundlich mir bitte bitte bitte ein config zu erstellen *liebguck*

dies ist mein system :
asus a7v ViA chipsatz(onboard promise udma 100 controller) hde platte
hde1 boot ext3
hde5 swap
hde6 xfs root
asus geforce 2mx
sb live player emu10k1
natsemi (modul) netzwerkkadde T-dsl
MS itellie USB maus
hda (brenner)
hdb(win platte fat)
hdc (dvdrom)
Athlon Thunderbird 1Ghz
kernel 2.4.18xfs gentoo

ich hoffe jemand ist so freundlich und hilft einen kleinen armen linux user

Gruss BArt

bernie
31.08.02, 16:08
Ich kann dir gerne eine .config erstellen, aber glaubst du dass das sinnvoll ist? Dann lernst du ja nichts,.. es gibt so viele HOWTOs, da muss sich doch was finden lassen, dass dein Kernel zumindest bootet. oder?

Solltest du immer noch eine .config wollen, schick bitte noch die Ausgaben von lspci und cat /proc/pci.

Ciao, Bernie

Jinto
31.08.02, 16:21
Ich möchte dich am Kernelbacken wirklich nicht hindern, aber warum willst du dir einen Kernel backen?

84R7
31.08.02, 16:37
hi !
Jinto , bei gentoo musste das , der erste liev , aber der rest nich , dabei wollte ich bnur die usb unterstützung dfür die maus aktiviren , und dabei hab ich wohl ein paar sachen verstellt ,k.a. was und jez geht nix mehr !


bernie_x :
Hi!
lspci hat nur mist ausgegeben , hab aber das proc pci dingen
weißt ja welchen kernel und os ich hab , hoffe das macht nix aus !?

hier sit die ausgabe von /proc/pci



---------------------------------------------


PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 2).
Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (rev 0).
Master Capable. No bursts. Min Gnt=8.
Bus 0, device 4, function 0:
ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 34).
Bus 0, device 4, function 1:
IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 16).
Master Capable. Latency=32.
I/O at 0xd800 [0xd80f].
Bus 0, device 4, function 2:
USB Controller: VIA Technologies, Inc. UHCI USB (rev 16).
IRQ 9.
Master Capable. Latency=32.
I/O at 0xd400 [0xd41f].
Bus 0, device 4, function 3:
USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 16).
IRQ 9.
Master Capable. Latency=32.
I/O at 0xd000 [0xd01f].
Bus 0, device 4, function 4:
Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 48).
IRQ 9.
Bus 0, device 10, function 0:
Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 5).
Master Capable. Latency=32. Min Gnt=2.Max Lat=20.
I/O at 0xa400 [0xa41f].
Bus 0, device 10, function 1:
Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 5).
Master Capable. Latency=32.
I/O at 0xa000 [0xa007].
Bus 0, device 13, function 0:
Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller (rev 0).
IRQ 9.
Master Capable. Latency=32. Min Gnt=11.Max Lat=52.
I/O at 0x9800 [0x98ff].
Non-prefetchable 32 bit memory at 0xd5800000 [0xd5800fff].
Bus 0, device 17, function 0:
Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 2).
IRQ 10.
Master Capable. Latency=32.
I/O at 0x9400 [0x9407].
I/O at 0x9000 [0x9003].
I/O at 0x8800 [0x8807].
I/O at 0x8400 [0x8403].
I/O at 0x8000 [0x803f].
Non-prefetchable 32 bit memory at 0xd5000000 [0xd501ffff].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev 161).
IRQ 11.
Master Capable. Latency=64. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xd6000000 [0xd6ffffff].
Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].



Gruss Bart
meine icq nummer ist : 84729158

84R7
31.08.02, 20:08
bei der config , bei die mir Berni erstellt hat kommt beim booten folgendes :
mounting tmpfs at /mnt/.init.d . . . [oops]
the "mount" command failed with error : wrong fs type bad superblock on tmpfs or too many mounted file systems
scince this is a critical tash , startup cannot continu

habe tmpfs schon hinzugefügt , komisch
bart