PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Netzwerk tot....so halb



-Sensemann-
26.06.02, 13:55
hi,

ich komme grad von ner lan wieder hab grade frisch formatiert...

nun kann ich auf meinen samba server nicht zugreifen ...weil er den nicht findet und nicht pingen kann...

ins internet kann ich und an den kabeln hab ich nichts verändert...

kann es vielleicht an einem stromausfall gelegen haben oder das ich mal eine route gesetzt habe und das wieder gelöscht habe..?

schonmal danke im vorraus

-Sensemann-
26.06.02, 14:20
soo also beim runterfahren sagt er micht fehlerhafter eintrag in der etc/rout...

0.0.0.0

sowies aussieht muss es beim linuxrechner liegen..hab aber keinen blassen schimmer warum er nicht wirklich im netzwerk ist

samba funktioniert jedenfalls einwandfrei

rcmb status.....smbd/nmbd running

bluesky666
26.06.02, 14:44
restarte einfach deine Route, weiß jetzt nicht genau obs bei anderen Distris auch so geht, unter SuSE machst Du einfach rcroute restart

gruß

Helge

-Sensemann-
26.06.02, 14:57
sehe grade unten links in der console..


jun 26 14:41:33 Linux Kernel: eth0 : TX timeout -

hmm also liegst defenitiv an der netzwerkkarte des server..probier das gleich mal mit route resetten..(die route gibst momentan nicht da router..noch offline..)

-Sensemann-
27.06.02, 00:45
route resetten klappt net :( weis denn keiner mehr rat?

romulus23
27.06.02, 00:53
also als es noch Glaskugeln gab, so im Mittelalter oder so, da konnte dir noch geholfen werden, aber heutzutage ... früher war halt alles besser

Also: ein paar mehr Infos, sonst passiert hier nix.

-Sensemann-
27.06.02, 00:58
gut ok..dann sag mir was dir helfen kann! wo ich nachsehen muss um mehr infos zu bekommen!?

Belkira
27.06.02, 01:18
Was für Netzwerkkarten?

Was sagt "dmesg" oder /var/log/messages auf allen beteiligten Rechnern über den Netzwerkkartentreiber?

Was für eine Netztopologie?

Was sagen "route -n" und "ifconfig -a" auf allen beteiligten Rechnern?

-Sensemann-
27.06.02, 12:18
1) eine sterntopologie mit einem 10mbit hub
2) im linuxrechner eine rl 2000 pci (10mbit)
3) route -n

Kernel ip routing table

Destination-------Gateway-----Genmask---------flags--metric-mask---use--iface

192.168.0.0------0.0.0.0-------255.255.255.0----u-------0--------0-------0----eth0


4) ifconfig -a

tippe ich grad ab...oder weis jemand wie ich eine file von linux auf windows bringe..mithilfe von diskette? weil windows das format ja net wirklich erkennt :(

-Sensemann-
27.06.02, 13:55
das bekomm ich bei dmesg


linux:~ # dmesg
sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4
Directory sread (sector 0x13) failed
attemp

Belkira
27.06.02, 14:13
Dateien auf eine DOS-Disk transferieren, kannst Du z.B. mit "mcopy" (oder die Diskette ordnungsgemäß über /dev/fd0 mounten, dann könntest Du aber auch gleich Deine Windows Partition mounten, sofern es FAT16, FAT32 oder VFAT ist).

3) Localhost (127.0.0.1), das loopback Device, willst Du absichtlich nicht oder fehlt es aus Versehen?

4) Sieht soweit gut aus, abgesehen von 3).


das bekomm ich bei dmesg

Directory sread (sector 0x13) failed
attempt to access beyond end of device
02:00: rw=0, want=10, limit=4

Was Du hier siehst, sind zig Fehlermeldungen vom Floppy Disk Zugriff. Nicht schön.

Unerwartet viele (Fehler-)meldungen füllen den Ringpuffer "dmesg" und verdrängen wichtigere ältere Meldungen, die Du aber noch alle in /var/log/messages hast.

-Sensemann-
27.06.02, 14:35
wie stell ich das bei 3 ein?

und wie bekomm ich die floppy fehler wech? ist das sonst defekt?

die

/var/log/messages

seh ich mir gleich mal an und poste die...

-Sensemann-
27.06.02, 15:01
so hier die complette

var/log/messages

hmmm

Belkira
27.06.02, 15:36
Die Probleme mit eth0 gingen ja schon Ende April los, aber dann nicht täglich, sondern nur in unregelmäßigen Abständen:


Apr 26 21:00:30 linux kernel: Davicom DM9xxx net driver, version 1.36p1 (May 12, 2001)
Apr 26 21:00:30 linux kernel: PCI: Found IRQ 9 for device 00:14.0
Apr 26 21:00:30 linux kernel: eth0: Davicom DM9102 at 0xe400, 00:80:ad:05:68:c6, IRQ 9
Apr 26 21:00:50 linux kernel: eth0: Tx timeout - resetting
Apr 26 21:00:54 linux kernel: eth0: no IPv6 routers present
Apr 26 21:00:55 linux kernel: eth0: Tx timeout - resetting

Dann irgendwann hast Du DHCP aktiviert, obwohl Du offenbar keinen DHCP Server im Netz hast.

May 9 10:32:01 linux dhcpcd[1542]: timed out waiting for a valid DHCP server response
Und dann endet /var/log/messages am 21.Juni, während wir schon den 27.Juni haben. ;)

Das noch fehlende "ifconfig -a" und diese "eth0: Tx timeout - resetting" Meldungen komplizieren die Fehlersuche. Du sagtest ja bereits, per Ping auf IP Adresse hin wäre das Lan nicht erreichbar.


ifconfig -a &> ifconfig.txt
(DOS Diskette einlegen)
mcopy ifconfig.txt a:

-Sensemann-
27.06.02, 15:50
das ist der auszug

linux:/home/sense # ifconfig -a
eth0 Protokoll:Ethernet Hardware Adresse 00:80:AD:05:68:C6
inet Adresse:192.168.0.2 Bcast:192.168.0.255 Maske:255.255.255.0
inet6 Adresse: fe80::280:adff:fe05:68c6/10 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:9 Basisadresse:0xe400

lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:641 errors:0 dropped:0 overruns:0 frame:0
TX packets:641 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:41446 (40.4 Kb) TX bytes:41446 (40.4 Kb)

sit0 Protokoll:IPv6-nach-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

Tommy_20
27.06.02, 16:50
hmmm, schon mal mit ner neuen nw-karte probiert?

-Sensemann-
27.06.02, 18:01
die leucht diode leuchtet auf...naja und gegen eine neue bzw ander nw karte spricht

1) keine andere
2) kein geld :(

:(

Belkira
27.06.02, 18:14
Kein anderer Rechner im LAN, wo Du eine Karte mal austauschen könntest?

Hast Du denn schon die Verkabelung geprüft und die Karte rausgenommen und wieder fest eingesteckt?

Stimmen die IP Adressen und Netzmaske auf den Clients im LAN?

Ein "ping -c 1 192.168.0.? ; arp -a" bringt nicht die MAC der Karte im Zielrechner?

-Sensemann-
27.06.02, 18:55
hmm muss nu wech...werd mir vom nachbarn eine mal ausleihen und heute nacht ausprobieren...weil auf dem rechner liegen alle wichtigen files :(

wie war das aber nun mit

127.0.0.1 localhost...wie setze ich das wieder zurück? hmm vielleicht liegt das daran?

-Sensemann-
28.06.02, 14:45
endlich wieder zu hause *freu*

hab das gleich mal eingetippt

linux:/home/sense # ping -c 1 192.168.0.2
PING 192.168.0.2 (192.168.0.2) from 192.168.0.2 : 56(84) bytes of data.
64 bytes from 192.168.0.2: icmp_seq=1 ttl=255 time=1.539 msec

--- 192.168.0.2 ping statistics ---
1 packets transmitted, 1 received, 0% loss, time 0ms
rtt min/avg/max/mdev = 1.539/1.539/1.539/0.000 ms
linux:/home/sense # ping -c 1 192.168.0.84
PING 192.168.0.84 (192.168.0.84) from 192.168.0.2 : 56(84) bytes of data.
From 192.168.0.2: icmp_seq=1 Destination Host Unreachable
From 192.168.0.2 icmp_seq=1 Destination Host Unreachable


--- 192.168.0.84 ping statistics ---
1 packets transmitted, 0 received, +2 errors, 100% loss, time 0ms


linux:/home/sense # arp -a
? (192.168.0.84) auf <unvollständig> auf eth0
? (192.168.0.84) auf <unvollständig> auf eth0
linux:/home/sense #




wenn mir jetzt einer noch sagen kann wie ich den localhost eintrag dann wär ich glaub ich ein schritt weiter :)

Belkira
28.06.02, 15:49
192.168.0.84 ist ein real existierender Rechner im LAN? Und der ist auch wirklich korrekt konfiguriert?

Was Dein Problem mit unvollständiger Config des loopback Device betrifft, das ist was anderes und sollte SuSE-spezifisch gelöst werden.

-Sensemann-
28.06.02, 15:52
192.168.0.84 ist mein windows rechner im netzwerk der grad am internet hängt.

192.168.0.2 ist mein linux rechner.

als linux distri hab ich SuSe 7.3

Belkira
28.06.02, 16:04
192.168.0.84 ist mein windows rechner im netzwerk der grad am internet hängt.
Da ich kein Hellseher bin und auch Deine Antworten auf Fragen zu route -n und ifconfig -a glauben muß, setz ich voraus, daß der Windows Rechner richtig fürs LAN konfiguriert ist (IP, Subnetz, Netzmaske, etc.) und auf Pings antworten würde.

Bleiben die Transmit-Fehler Deiner eth0 auf dem Linux Rechner. Das ist ein Hardware-Problem.

-Sensemann-
28.06.02, 16:42
also auf der lan auf der ich war hat mich fast jeder gefunden. (ausser die mit firewall, die sowieso keinen ohne weiteres fanden)
aber halt der linux rechner nicht :(
hmmm wenn das jetzt ein hardware fehler ist bin ich am arsch :( !


die sachen von ifconfig -a ,route -n usw habe ich direkt vom linuxrechner..

hat denn sonst keiner eine idee?

-Sensemann-
28.06.02, 18:21
soooo ich hab den schuldigen gefunden....

da der computer schon seit eh und jeh am selben platz stand und nicht umgestellt wurde und somit auch die verkabelung nicht rausgenommen wurde und wieder reingesteckt wurde..weshalb es ja keinen verschleiss gab fielen mir plötzlich die kratzspuren aufem tisch auf..naja guck ich dochmal dahin und siehe da da hat jemand noch ne karte eingesetzt wo ich wech war.......und das kabel falsch reingesetzt...nun gut