Archiv verlassen und diese Seite im Standarddesign anzeigen : nvidia + suse 7.2 +nix geht mehr
ich hab mir die suse 7.2 rpms runtergeladen. installed. sax 2 mit 3d unterstüzung gestartet. bei graphikkarte alle module markiert und geladen. computer neustart. kdm lädt ganz normal hoch, xterm redet auch was wie nvidia kernel geldaden. aber maus und tastatr machen keinen mux mehr =(( unter win 2k gehn sie. was soll cih nun machen, ich habae viel arbeit hierein gesteckt, nicht neuinstalle!!=(
ps: weis jemand ob suse mesa rpms anbietet?
christophwth
23.10.01, 20:18
Hi
die kombination
mesa und nvidia treiber solltest du vergessen
ich würde alles was in entferntesten mit mesa zu tun hast deinstallieren.
welche treiber hast du herunter geladen ?
NVIDIA_GLX-1.0-1541.suse72.i386.rpm
NVIDIA_kernel-1.0-1541.suse72.i386.rpm
diese hast du nach der pdf readme von nvidia installiert.
auf fast allen rechnern ( ausser meinem ) sollte das so funktionieren.
die forensuche sollte dir weitere benötigte hinweise geben
gruss
christoph
hmm, ja aber ich muss zuerst mal wieder ins linux reinkommen, bei mir startet kdm am anfang, aber der hängt ja, also wie komm ich zumindest in die konsole?
>diese hast du nach der pdf readme von nvidia installiert.
stimmt nicht ganz, eben rpms installed, und dann in sax2 rein, dort 3d module gelade. so wars, aber nach neustart eben maus und tastatur nix mehr
mein xfree86 file
#--------#
# »» SaX generated XFree86 config file ««
# Created on: 2001-10-23.
#
# Version: 4.3
# Contact: Marcus Schaefer <sax@suse.de>, 2001
#
# Automatically generated by SaX2 (4.3)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk"
FontPath "/usr/X11R6/lib/X11/fonts/japanese"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "ServerFlags"
EndSection
Section "Module"
Load "type1"
Load "speedo"
Load "extmod"
Load "freetype"
Load "fgl1"
Load "fgl23"
Load "glx"
Load "dri"
EndSection
Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "de_CH"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/psaux"
Option "InputFashion" "Mouse"
Option "Name" "MOUSEMAN WHEEL"
Option "Protocol" "imps/2"
Option "Vendor" "LOGITECH"
EndSection
Section "Monitor"
HorizSync 31-80
Identifier "Monitor[0]"
ModelName "1280X1024@75HZ"
VendorName "--> VESA"
VertRefresh 50-75
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +HSync +VSync
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x870" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x870" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x870" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1152x870" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x870" "1024x768" "800x600" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "GeForce-2"
BusID "1:0:0"
Driver "nv"
Identifier "Device[0]"
Screen 0
VendorName "Nvidia"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
christophwth
23.10.01, 21:34
Hi
beim start von linux kann der runlevel angeben werden
mit lilo
linux 3 (gesetzt den fall "linux" ist name des kernels der gebootet werden soll )
wird nur in den runlevel 3 gebootet
um den treiber ins system einzubinden
reicht eine änderung in der
/etc/X11/XF86Config
versuch mal die zeile Driver "nv"
gegen Driver "nvidia"
auszutauschen
und ein # vor das Load "dri"
siehe auch pdf readme seite 21
teilweis funktionieren die treiber nur wenn
die option NvAGP angeben wird
(seite 28 )
sax2 unter suse 7.2 hat probleme mit der einrichtung der nvidia treiber.
gruss
christoph
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.