Mplayer spielt nichts ab...

[Virus-73]

So, hab lange gebraucht bis ich MPlayer installiert bekommen habe, nun kann ich es starten (auch gui) aber wenn ich ein File abspielen will sagt er in der Konsole:

Couldn't find free Xvideo port - maybe other applications keep open it
Error opening/initializing the selected video_out (-vo) device!

Weiß jemand was ich falsch mache??

[next]

hi,
also das problem hatte ich auch mal. Probiers mal mit:
(g)mplayer -vo dga <film>

müsste eigentlich laufen!

cu next

[Virus-73]

Folgender Auswurf kommt und Mplayer bricht ab:

Playing /win3/dl/incoming/TEST.avi
Can't open IFO file: Datei oder Verzeichnis nicht gefunden
Not an URL!
Detected AVI file format!
list_end=0x2292
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
list_end=0x10F4
list_end=0x2186
list_end=0x2292
list_end=0x2A8065DE
VIDEO: [DIV3] 640x272 24bpp 25,00 fps 834,5 kbps (101,9 kbyte/s)
[V] filefmt:3 fourcc:0x33564944 size:640x272 fps:25,00 ftime:=0,0400
Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
Selecting Audio Decoder: [mp3lib] MPEG layer-2, layer-3
CPU vendor name: AuthenticAMD max cpuid level: 1
CPU: Advanced Micro Devices Athlon TB Thunderbird (Type: 6, Stepping: 4)
extended cpuid-level: 6
mp3lib: made decode tables with MMX optimization
init layer2&3 finished, tables done
mp3lib: using 3DNow!Ex optimized decore!
MPEG 1.0, Layer III, 44100 Hz 128 kbit Joint-Stereo, BPF: 417
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 16000->176400
================================================== ========================
Requested video codec family [ffdivx] (vfm=5) not available (enable it at compil
e time!)
Opening Video Decoder: [odivx] DivX5Linux lib (odivx mode)
touser
pp 0
VDec: vo config request - 640 x 272, Planar YV12
[PP] Using codec's postprocessing, max q = 9
vo_dga: Mode: depth=15, bpp=16, r=007c00, g=0003e0, b=00001f, conversion (slow),
(-bpp 15)
vo_dga: Mode: depth=16, bpp=16, r=00f800, g=0007e0, b=00001f, native (fast),
(-bpp 16)
vo_dga: Mode: depth=24, bpp=24, r=ff0000, g=00ff00, b=0000ff, not supported :-(
(-bpp 24)
vo_dga: Mode: depth=24, bpp=32, r=ff0000, g=00ff00, b=0000ff, not supported :-(
(-bpp 32)
Movie-Aspect is undefined - no prescaling applied.
VO: [dga] 640x272 => 640x272 Planar YV12
vo_dga: DGA 2.0 available :-) Can switch resolution AND depth!
vo_dga: Selected hardware mode 640 x 480 @ 84 Hz @ depth 16, bitspp 16.
vo_dga: Video parameters by codec: 640 x 272, depth 16, bitspp 16.
vo_dga: Framebuffer mapping failed!!!
FATAL: Cannot initialize video driver!
VDecoder init failed :(
Opening Video Decoder: [divx4] DivX5Linux lib (divx4 mode)
VDec: vo config request - 640 x 272, Packed YUY2
[PP] Using codec's postprocessing, max q = 9
Movie-Aspect is undefined - no prescaling applied.
VO: [dga] 640x272 => 640x272 BGR 16-bit
vo_dga: DGA 2.0 available :-) Can switch resolution AND depth!
vo_dga: Selected hardware mode 640 x 480 @ 84 Hz @ depth 16, bitspp 16.
vo_dga: Video parameters by codec: 640 x 272, depth 16, bitspp 16.
vo_dga: Framebuffer mapping failed!!!
FATAL: Cannot initialize video driver!
VDecoder init failed :(
Opening Video Decoder: [dshow] DirectShow video codecs
fs seg 0x40024000
Loading DLL: 'divx_c32.ax'
Win32 LoadLibrary failed to load: divx_c32.ax, /usr/lib/win32/divx_c32.ax, /usr/
local/lib/win32/divx_c32.ax
Warning: DS_Filter() could not open DirectShow DLL. (DLL=divx_c32.ax)
Failed to create DirectShow filter
ERROR: Couldn't open required DirectShow codec: divx_c32.ax
Maybe you forget to upgrade your win32 codecs?? It's time to download the new
package from: ftp://mplayerhq.hu/MPlayer/releases/w32codec.zip !
VDecoder init failed :(
Opening Video Decoder: [vfw] Win32/VfW video codecs
VDec: vo config request - 640 x 272, Packed YUY2
[PP] Using codec's postprocessing, max q = 9
Movie-Aspect is undefined - no prescaling applied.
VO: [dga] 640x272 => 640x272 BGR 15-bit
vo_dga: DGA 2.0 available :-) Can switch resolution AND depth!
vo_dga: Selected hardware mode 640 x 480 @ 84 Hz @ depth 16, bitspp 16.
vo_dga: Video parameters by codec: 640 x 272, depth 15, bitspp 16.
vo_dga: Framebuffer mapping failed!!!
FATAL: Cannot initialize video driver!
VDecoder init failed :(
Opening Video Decoder: [vfw] Win32/VfW video codecs
VDec: vo config request - 640 x 272, Packed YUY2
[PP] Using codec's postprocessing, max q = 9
Movie-Aspect is undefined - no prescaling applied.
VO: [dga] 640x272 => 640x272 BGR 15-bit
vo_dga: DGA 2.0 available :-) Can switch resolution AND depth!
vo_dga: Selected hardware mode 640 x 480 @ 84 Hz @ depth 16, bitspp 16.
vo_dga: Video parameters by codec: 640 x 272, depth 15, bitspp 16.
vo_dga: Framebuffer mapping failed!!!
FATAL: Cannot initialize video driver!
VDecoder init failed :(
Can't find codec matching selected -vo and video format 0x33564944 !
*** Try to upgrade /home/nils/.mplayer/codecs.conf from etc/codecs.conf
*** If it's still not OK, then read DOCS/codecs.html!
================================================== ========================
AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian)
ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian)
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-
bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags: 2/2 (65536 bytes/frag) free: 131072
Video: no video!!!
Start playing...
A: 0,0 0,0% 0%

MPlayer interrupted by signal 11 in module: unknown
- MPlayer crashed by bad usage of CPU/FPU/RAM. Recompile MPlayer with --enable-d
ebug and make a 'gdb' backtrace and disassembly. For details, see DOCS/bugreport
s.html section 5.b.
- MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer code _o
r_ in your drivers _or_ in your gcc version. If you think it's MPlayer's fault,
please read DOCS/bugreports.html and follow instructions there. We can't and won
't help unless you provide these informations when reporting a possible bug.

*** free_stream() called ***

-----------------------------------------------------------------------------------------

Also ich werd daraus nicht ganz schlau, er meint ja irgendwie das kein video gefunden wird, dachte schon das es an meiner Kyro Grafikkarte liegt, aber unter Xine kann er Video abspielen, aber kein Sound....

[JAF]

versuch es mal im x11 mit -vo x11 oder mit -vo vesa auf der konsole.

was macht er da?

mfg johannes

[dj-submerge]

hi,

dga ist afaik nur für matrox karten/treiber.

Der Tipp von JAF sollte funktionieren. Nimm einfach den x11 als Output

mplayer -vo x11

das ganze kannst du auch per default dann in ~/.mplayer/config einstellen.

Einfach v0=x11 hinzufügen

gruss

marc

[JAF]

sorry, aber das dga nur für matrox karten/treiber ist ned richtig.

nur muss es vom xfree86 unterstützt werden...

[dj-submerge]

Richtig ,


dga != mga ... :)


Hier die komplette Liste

Supported video output devices

# General: x11:X11 with SHM extension
# xv:X11 using overlays with the Xvideo extension (hardware YUV & scaling)
# gl:OpenGL renderer
# dga:X11 DGA extension (both v1.0 and v2.0)
# fbdev:Output to general framebuffers
# svga:Output to SVGAlib
# sdl:SDL >= v1.1.7 driver (supports software scaling, and versions >=1.1.8 even support Xvideo, thus hardware rendering)
# ggi:similar to SDL
# aalib:Textmode rendering
# vesa:display through the VESA BIOS (also needed for Radeon TV-out)
# directfb:DirectFB support

# Card specific: vidix:VIDeo Interface for *niX
# xvidix:VIDIX in X window
# mga:Matrox G200/G400 hardware YUV overlay via the mga_vid device
# xmga:Matrox G200/G400 overlay (mga_vid) in X11 window (Xv emulation on X 3.3.x !)
# syncfb:Matrox G400 YUV support on framebuffer (not tested, maybe broken)
# 3dfx:Voodoo 3/Banshee hardware YUV support (/dev/3dfx) (not yet tested, maybe broken)
# tdfxfb:Voodoo 3/Banshee hardware YUV support on tdfx framebuffer (works!)

[JAF]

ist zwar noch immer nicht die komplette, aber egal ;-)

mfg johannes

[Virus-73]

Für alle mit dem gleichen Problem:

(g)mplayer -vo x11 klappt :)

[Virus-73]

hm... jetzt hab ich das problem, das bei fullscreen modus schwarze Ränder da sind und das Bild die gleich größe behält, hab die manpages gelesen, aber weder -fs, -fsmode, -screenh, -screenw, -zoom oder -sws egal wie man es mit einadnder kombiniert zeigen wirkung :(

[Strangerli]

Hey Super. Das selbe Problem hatte ich auch und mplayer -vo x11 hat geklappt. :-)
Und schon in dir Config reingeschrieben. Danke *freu*

Jetzt such ich hier noch, wie man die Zeiteinblendung wegmachen kann.

[Fletch]

drück einfach mal o! :)