PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : !!! Faxen machen mit Hylafax!!


xrick63
12.04.02, 08:51
Tach zusammen!!

Immer noch habe ich folgendes problem. Beim versuch Hylafax zum faxen mit meinem Elsa Modem zu bewegen bekomme ich kein Wählton. Um ein Amt zu bekommen muß vor die eigentlliche nummer eine Null gewählt werden. Nach dem starten des Rechners ist automatisch hfaxd, faxq und eine Cleint Software gestartet. Doch nicht Faxgetty. Das muß ich erst mit dem Befehl /usr/lib/fax/faxgetty -D -q /var/spool/fax modem von Hand einbinden. Wisst ihr zufällig wie ich das Automatisiere? Ein w. oder 0, als Prefix vor die eigentliche Nummer inHylafax zu setzen hat auch keinen Erfolg gebracht. Denke mal das mit der Komunikation zwischen dem modem (dev/ttys0) und faxgetty etwas nicht in Ordnung ist.
Hier noch ein paar ausgaben vom System

Danke Guido

Log Datei

Apr 12 09:46:19.01: [ 2518]: SESSION BEGIN 00000003 49906104400955
Apr 12 09:46:19.01: [ 2518]: HylaFAX (tm) Version 4.1
Apr 12 09:46:19.01: [ 2518]: SEND FAX: JOB 4 DEST 0W06104400955 COMMID 00000003
Apr 12 09:46:19.01: [ 2518]: DEVICE '/dev/modem'
Apr 12 09:46:19.01: [ 2518]: MODEM set DTR OFF
Apr 12 09:46:19.01: [ 2518]: DELAY 75 ms
Apr 12 09:46:19.08: [ 2518]: MODEM set DTR ON
Apr 12 09:46:19.08: [ 2518]: DELAY 2600 ms
Apr 12 09:46:21.68: [ 2518]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Apr 12 09:46:21.69: [ 2518]: MODEM flush i/o
Apr 12 09:46:21.69: [ 2518]: <-- [4:ATZ\r]
Apr 12 09:46:21.81: [ 2518]: --> [2:OK]
Apr 12 09:46:21.81: [ 2518]: <-- [5:ATE0\r]
Apr 12 09:46:21.85: [ 2518]: --> [4:ATE0]
Apr 12 09:46:21.85: [ 2518]: --> [2:OK]
Apr 12 09:46:21.85: [ 2518]: <-- [5:ATV1\r]
Apr 12 09:46:21.90: [ 2518]: --> [2:OK]
Apr 12 09:46:21.90: [ 2518]: <-- [5:ATQ0\r]
Apr 12 09:46:21.95: [ 2518]: --> [2:OK]
Apr 12 09:46:21.95: [ 2518]: <-- [7:ATS0=0\r]
Apr 12 09:46:22.00: [ 2518]: --> [2:OK]
Apr 12 09:46:22.00: [ 2518]: <-- [7:ATS8=2\r]
Apr 12 09:46:22.05: [ 2518]: --> [2:OK]
Apr 12 09:46:22.05: [ 2518]: <-- [8:ATS7=60\r]
Apr 12 09:46:22.10: [ 2518]: --> [2:OK]
Apr 12 09:46:22.10: [ 2518]: <-- [14:AT+FCLASS=2.0\r]
Apr 12 09:46:22.15: [ 2518]: --> [2:OK]
Apr 12 09:46:22.15: [ 2518]: <-- [9:AT+FLO=1\r]
Apr 12 09:46:22.20: [ 2518]: --> [2:OK]
Apr 12 09:46:22.20: [ 2518]: <-- [9:AT+FPP=0\r]
Apr 12 09:46:22.25: [ 2518]: --> [2:OK]
Apr 12 09:46:22.25: [ 2518]: <-- [9:AT+FBO=0\r]
Apr 12 09:46:22.30: [ 2518]: --> [2:OK]
Apr 12 09:46:22.30: [ 2518]: <-- [10:AT+FCT=30\r]
Apr 12 09:46:22.35: [ 2518]: --> [2:OK]
Apr 12 09:46:22.35: [ 2518]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 12 09:46:22.40: [ 2518]: --> [2:OK]
Apr 12 09:46:22.40: [ 2518]: <-- [7:AT+FAP\r]
Apr 12 09:46:22.45: [ 2518]: --> [5:ERROR]
Apr 12 09:46:22.45: [ 2518]: MODEM Command error
Apr 12 09:46:22.45: [ 2518]: <-- [9:AT+FIE=0\r]
Apr 12 09:46:22.50: [ 2518]: --> [2:OK]
Apr 12 09:46:22.50: [ 2518]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 12 09:46:22.55: [ 2518]: --> [2:OK]
Apr 12 09:46:22.55: [ 2518]: <-- [5:ATM0\r]
Apr 12 09:46:22.60: [ 2518]: --> [2:OK]
Apr 12 09:46:22.60: [ 2518]: MODEM input buffering enabled
Apr 12 09:46:22.61: [ 2518]: <-- [14:AT+FCLASS=2.0\r]
Apr 12 09:46:22.75: [ 2518]: --> [2:OK]
Apr 12 09:46:22.75: [ 2518]: <-- [9:AT+FLO=1\r]
Apr 12 09:46:22.90: [ 2518]: --> [2:OK]
Apr 12 09:46:22.90: [ 2518]: <-- [9:AT+FPP=0\r]
Apr 12 09:46:23.05: [ 2518]: --> [2:OK]
Apr 12 09:46:23.05: [ 2518]: <-- [9:AT+FBO=0\r]
Apr 12 09:46:23.20: [ 2518]: --> [2:OK]
Apr 12 09:46:23.20: [ 2518]: <-- [10:AT+FCT=30\r]
Apr 12 09:46:23.35: [ 2518]: --> [2:OK]
Apr 12 09:46:23.35: [ 2518]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 12 09:46:23.50: [ 2518]: --> [2:OK]
Apr 12 09:46:23.50: [ 2518]: <-- [7:AT+FAP\r]
Apr 12 09:46:23.65: [ 2518]: --> [5:ERROR]
Apr 12 09:46:23.65: [ 2518]: MODEM Command error
Apr 12 09:46:23.65: [ 2518]: <-- [9:AT+FIE=0\r]
Apr 12 09:46:23.80: [ 2518]: --> [2:OK]
Apr 12 09:46:23.80: [ 2518]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 12 09:46:23.95: [ 2518]: --> [2:OK]
Apr 12 09:46:23.95: [ 2518]: <-- [29:AT+FLI="Asima Software GmbH"\r]
Apr 12 09:46:24.10: [ 2518]: --> [2:OK]
Apr 12 09:46:24.11: [ 2518]: DIAL 0906104400955
Apr 12 09:46:24.11: [ 2518]: <-- [18:ATDT0906104400955\r]
Apr 12 09:46:34.58: [ 2518]: --> [11:NO DIALTONE]
Apr 12 09:46:34.58: [ 2518]: SEND FAILED: JOB 4 DEST 0W06104400955 ERR No local dialtone
Apr 12 09:46:34.58: [ 2518]: <-- [5:ATH0\r]
Apr 12 09:46:34.73: [ 2518]: --> [2:OK]
Apr 12 09:46:34.73: [ 2518]: MODEM set DTR OFF
Apr 12 09:46:34.73: [ 2518]: SESSION END




tail -f /var/log/messages

pr 12 09:45:23 pc-guido FaxGetty[1850]: MODEM Command error
Apr 12 09:45:23 pc-guido FaxGetty[1850]: <-- [9:AT+FIE=0\r]
Apr 12 09:45:23 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:45:23 pc-guido FaxGetty[1850]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 12 09:45:23 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:45:23 pc-guido FaxGetty[1850]: MODEM "ELSA AG, AACHEN (GERMANY)" "MicroLink 56k Internet c"/"Version 1.71 / 26.10.1999"
Apr 12 09:45:23 pc-guido FaxGetty[1850]: <-- [5:ATM0\r]
Apr 12 09:45:23 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:45:23 pc-guido FaxGetty[1850]: <-- [9:AT+FCR=1\r]
Apr 12 09:45:23 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:45:23 pc-guido FaxGetty[1850]: <-- [29:AT+FLI="Asima Software GmbH"\r]
Apr 12 09:45:23 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:45:23 pc-guido FaxGetty[1850]: MODEM input buffering disabled
Apr 12 09:45:36 pc-guido FaxGetty[1850]: ANSWER: Can not lock modem device
Apr 12 09:45:58 pc-guido HylaFAX[2102]: Filesystem has SysV-style file creation semantics.
Apr 12 09:45:58 pc-guido FaxQueuer[797]: SUBMIT JOB 4
Apr 12 09:46:06 pc-guido FaxGetty[1850]: MODEM set DTR OFF
Apr 12 09:46:06 pc-guido FaxGetty[1850]: DELAY 75 ms
Apr 12 09:46:06 pc-guido FaxGetty[1850]: MODEM set DTR ON
Apr 12 09:46:06 pc-guido FaxGetty[1850]: DELAY 2600 ms
Apr 12 09:46:08 pc-guido FaxGetty[1850]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Apr 12 09:46:08 pc-guido FaxGetty[1850]: MODEM flush i/o
Apr 12 09:46:08 pc-guido FaxGetty[1850]: <-- [4:ATZ\r]
Apr 12 09:46:08 pc-guido FaxGetty[1850]: --> [3:ATZ]
Apr 12 09:46:08 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:08 pc-guido FaxGetty[1850]: <-- [5:ATE0\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [4:ATE0]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [5:ATV1\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [5:ATQ0\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [7:ATS0=0\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [7:ATS8=2\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [8:ATS7=60\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [12:AT+FCLASS=?\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [23:0,1,1.0,2,2.0,2.1,8,8.0]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [14:AT+FCLASS=2.0\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [8:AT+FMI?\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [27:"ELSA AG, Aachen (Germany)"]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [8:AT+FMM?\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [26:"MicroLink 56k Internet c"]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [8:AT+FMR?\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [27:"Version 1.71 / 26.10.1999"]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [9:AT+FCC=?\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [45:(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [9:AT+FCQ=?\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [11:(0-2),(0-2)]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [9:AT+FAP=?\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [17:(0,1),(0,1),(0,1)]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [9:AT+FSP=?\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [5:(0,1)]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [14:AT+FCLASS=2.0\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [9:AT+FLO=1\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [9:AT+FPP=0\r]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:09 pc-guido FaxGetty[1850]: <-- [9:AT+FBO=0\r]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: <-- [10:AT+FCT=30\r]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: <-- [7:AT+FAP\r]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: --> [5:ERROR]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: MODEM Command error
Apr 12 09:46:10 pc-guido FaxGetty[1850]: <-- [9:AT+FIE=0\r]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: MODEM "ELSA AG, AACHEN (GERMANY)" "MicroLink 56k Internet c"/"Version 1.71 / 26.10.1999"
Apr 12 09:46:10 pc-guido FaxGetty[1850]: <-- [5:ATM0\r]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: <-- [9:AT+FCR=1\r]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: <-- [29:AT+FLI="Asima Software GmbH"\r]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: --> [2:OK]
Apr 12 09:46:10 pc-guido FaxGetty[1850]: MODEM input buffering disabled
Apr 12 09:46:10 pc-guido FaxQueuer[797]: JOB 4 (active dest +49906104400955 pri 127 tts 0:00 killtime 2:58:48): PREPARE STARTApr 12 09:46:10 pc-guido FaxQueuer[2514]: JOB 4 (active dest +49906104400955 pri 127 tts 0:00 killtime 2:58:48): CONVERT DOCUMENT: bin/ps2fax -o docq/doc4.ps;00 -r 98 -w 1728 -l 297 -m 30 -1 docq/doc4.ps.4
Apr 12 09:46:12 pc-guido FaxQueuer[797]: JOB 4 (active dest +49906104400955 pri 127 tts 0:00 killtime 2:58:46): PREPARE DONE Apr 12 09:46:12 pc-guido FaxQueuer[797]: JOB 4 (active dest +49906104400955 pri 127 tts 0:00 killtime 2:58:46): CMD START /usr/lib/fax/faxsend -m modem sendq/q4 (PID 2518)
Apr 12 09:46:12 pc-guido FaxSend[2518]: MODEM set DTR OFF
Apr 12 09:46:12 pc-guido FaxSend[2518]: DELAY 75 ms
Apr 12 09:46:12 pc-guido FaxSend[2518]: MODEM set DTR ON
Apr 12 09:46:12 pc-guido FaxSend[2518]: DELAY 2600 ms
Apr 12 09:46:14 pc-guido FaxSend[2518]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Apr 12 09:46:14 pc-guido FaxSend[2518]: MODEM flush i/o
Apr 12 09:46:14 pc-guido FaxSend[2518]: <-- [4:ATZ\r]
Apr 12 09:46:15 pc-guido FaxGetty[1850]: ANSWER: Can not lock modem device
Apr 12 09:46:15 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:15 pc-guido FaxSend[2518]: <-- [5:ATE0\r]
Apr 12 09:46:15 pc-guido FaxSend[2518]: --> [4:ATE0]
Apr 12 09:46:15 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:15 pc-guido FaxSend[2518]: <-- [5:ATV1\r]
Apr 12 09:46:15 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:15 pc-guido FaxSend[2518]: <-- [5:ATQ0\r]
Apr 12 09:46:15 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:15 pc-guido FaxSend[2518]: <-- [7:ATS0=0\r]
Apr 12 09:46:15 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:15 pc-guido FaxSend[2518]: <-- [7:ATS8=2\r]
Apr 12 09:46:15 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:15 pc-guido FaxSend[2518]: <-- [8:ATS7=60\r]
Apr 12 09:46:16 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:16 pc-guido FaxSend[2518]: <-- [12:AT+FCLASS=?\r]
Apr 12 09:46:16 pc-guido FaxSend[2518]: --> [23:0,1,1.0,2,2.0,2.1,8,8.0]
Apr 12 09:46:16 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:16 pc-guido FaxSend[2518]: <-- [14:AT+FCLASS=2.0\r]
Apr 12 09:46:16 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:16 pc-guido FaxSend[2518]: <-- [8:AT+FMI?\r]
Apr 12 09:46:16 pc-guido FaxSend[2518]: --> [27:"ELSA AG, Aachen (Germany)"]
Apr 12 09:46:16 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:16 pc-guido FaxSend[2518]: <-- [8:AT+FMM?\r]
Apr 12 09:46:16 pc-guido FaxSend[2518]: --> [26:"MicroLink 56k Internet c"]
Apr 12 09:46:16 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:16 pc-guido FaxSend[2518]: <-- [8:AT+FMR?\r]
Apr 12 09:46:16 pc-guido FaxSend[2518]: --> [27:"Version 1.71 / 26.10.1999"]
Apr 12 09:46:16 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:16 pc-guido FaxSend[2518]: <-- [9:AT+FCC=?\r]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [45:(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:17 pc-guido FaxSend[2518]: <-- [9:AT+FCQ=?\r]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [11:(0-2),(0-2)]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:17 pc-guido FaxSend[2518]: <-- [9:AT+FAP=?\r]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [17:(0,1),(0,1),(0,1)]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:17 pc-guido FaxSend[2518]: <-- [9:AT+FSP=?\r]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [5:(0,1)]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:17 pc-guido FaxSend[2518]: <-- [14:AT+FCLASS=2.0\r]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:17 pc-guido FaxSend[2518]: <-- [9:AT+FLO=1\r]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:17 pc-guido FaxSend[2518]: <-- [9:AT+FPP=0\r]
Apr 12 09:46:17 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:17 pc-guido FaxSend[2518]: <-- [9:AT+FBO=0\r]
Apr 12 09:46:18 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:18 pc-guido FaxSend[2518]: <-- [10:AT+FCT=30\r]
Apr 12 09:46:18 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:18 pc-guido FaxSend[2518]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 12 09:46:18 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:18 pc-guido FaxSend[2518]: <-- [7:AT+FAP\r]
Apr 12 09:46:18 pc-guido FaxSend[2518]: --> [5:ERROR]
Apr 12 09:46:18 pc-guido FaxSend[2518]: MODEM Command error
Apr 12 09:46:18 pc-guido FaxSend[2518]: <-- [9:AT+FIE=0\r]
Apr 12 09:46:18 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:18 pc-guido FaxSend[2518]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 12 09:46:18 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:18 pc-guido FaxSend[2518]: MODEM "ELSA AG, AACHEN (GERMANY)" "MicroLink 56k Internet c"/"Version 1.71 / 26.10.1999"
Apr 12 09:46:18 pc-guido FaxSend[2518]: <-- [5:ATM0\r]
Apr 12 09:46:19 pc-guido FaxSend[2518]: --> [2:OK]
Apr 12 09:46:19 pc-guido FaxSend[2518]: MODEM input buffering disabled
Apr 12 09:46:19 pc-guido FaxSend[2518]: HylaFAX (tm) Version 4.1
Apr 12 09:46:19 pc-guido FaxSend[2518]: SEND FAX: JOB 4 DEST 0W06104400955 COMMID 00000003
Apr 12 09:46:19 pc-guido FaxSend[2518]: DEVICE '/dev/modem'
Apr 12 09:46:34 pc-guido FaxSend[2518]: SEND FAILED: JOB 4 DEST 0W06104400955 ERR No local dialtone
Apr 12 09:46:34 pc-guido FaxQueuer[797]: JOB 4 (active dest +49906104400955 pri 127 tts 0:00 killtime 2:58:24): CMD DONE: exit status 0
Blade
12.04.02, 19:33
Hi xrick63,

ganz cool bleiben. Ich habe ein Elsa-Modem 56k pro und es funzt bestens. Also, unter SuSE Linux 7.0 gibt es eine Datei /etc/inittab mit dem Eintrag #fax getty (hylafx), den musste nur auskommentieren und den mo: ... - Befehl an Dein System anpassen. Dann wird der Dienst faxgetty automatisch gestartet.

Die benötigte 0 als Prefix kannst Du für Hylafax woanders eintragen. Ich denke, Du wählst Dich über eine Anlage ins Telefonnetz ein? Also, gehe zum Verzeichnis /var/spool/fax/etc und suche hier die Datei config.modem bzw. config.ttys0 oder oder oder ... eben so, wie Dein Modem heißt, aber ich denke, Dein Modem wird unter hylafax mit ... modem angesprochen. Öffne die Datei mit Deinem Liebligs-Editor und gehe zum Eintrag: ModemDialCommand . Dahinter sollte Folgendes eingetragen sein: ATX3DT0,%s . Bei ATX3 wartet das Modem nicht auf ein Freizeichen und mit DT0, wählt das Modem sofort die Null als Vorwahl und wartet ca. 2 sec. Bis zur weiteren Anwahl der Verbindungs-Nummer.

Hoffe es hilft?!?!

Grüße Blade :D